Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

4340 Alloy Steel Round Bar - Watervliet Arsenal

Active

W911PT26QA136Federal

Response Deadline09/10/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation from the Department of Defense for the Watervliet Arsenal requires the procurement of 198 alloy steel round bars. The material must be 4340 alloy steel conforming to SAE AMS6409 or 6414, prehardened to HRC 38-41, with a 3.0 inch diameter and a length of 5.0 plus .125 inches. Merchant quality and free machining grades are strictly prohibited, and the contractor must mark specific heat numbers on each article if the lot contains multiple heat numbers. The contract mandates inspection and requires data delivery in accordance with the attached Contract Data Requirements List. This is a total small business set-aside under NAICS code 331221. Interested parties must respond by September 10, 2026, to the primary point of contact, Stephanie Webster, for performance in Watervliet, New York.

General Info

DoD seeks 198 alloy steel round bars for Watervliet Arsenal by September 10, 2026.

Agency

Department Of Defense → W6QK Acc WvaView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

Watervliet, NY, USA

Set-Aside

SBA

Documents

(1)

W911PT26QA136 RFQ - 4340 Alloy Steel Round Bar

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 30

Solicitation

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 08:30:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc Wva

Contacts1 person available

OfficeWATERVLIET, NY, 12189-4050, USA

Organization / Agency

Department Of Defense → W6QK Acc Wva

View Agency Profile

Office AddressWATERVLIET, NY, 12189-4050, USA

Contacts

Stephanie Webster

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

198 EACH - 4340 ALLOY STEEL ROUND BAR PER SAE AMS6409 OR 6414, PREHARDENED TO HRC 38-41, 3.0 INCH DIAMETER, 5.0 + .125 INCH LENGTH. Merchant Quality and Free Machining Grades are Not Allowed. - Contractor must mark specific Heat numbers on each article if material lot contains multiple Heat numbers

To include contract data prepared and delivered in accordance with CONTRACT DATA REQUIREMENTS LIST (DD Form 1423) which is attached hereto as Exhibit A (CN 2)

*INSPECTION REQUIRED*

Similar Contracts

Same NAICS industry code

Supply of Raw Material / Forgings for Piston PinsThe Department of Defense, through the Land Supply Chain ESOC Buys agency, is seeking a subcontractor for the supply of raw materials, specifically pre-formed forgings or bar stock. These materials must adhere to strict metallurgical and dimensional specifications to ensure they can be properly machined into piston pins. This procurement opportunity is categorized under NAICS code 331221 and is associated with a place of performance in Chambersburg, Pennsylvania. Interested parties must submit their responses by the deadline of September 11, 2026.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

Domestic Raw Material Supply for Ferrous FastenersThe Department of Defense, through the ASC Commodities Division, is seeking a subcontractor for the supply of domestically sourced steel rod stock. This material is required for the production of military fasteners and must strictly comply with the Buy American Act, the Berry Amendment, and DFARS 252.225-7001 regulations. The contract falls under NAICS code 331221 and will be performed in Bremerton, Washington. The solicitation was posted on August 31, 2026, with a response deadline of September 8, 2026. Interested parties can find further details and submit responses through the DIBBS portal using the provided solicitation link.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2173

This contract is for the procurement of one sheet of hot rolled, milled edge steel with a minimum thickness of 0.1530 inches and a maximum thickness of 0.1670 inches, measuring 36 inches wide by 120 inches long. The material must strictly adhere to the specified dimensions, as test coupons are not permitted. A Certificate of Quality Compliance is required for every shipment and must be forwarded to the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for the award. Strict marking requirements apply, including the DLA contract delivery order number, NSN, specification number, grade, alloy, manufacturer name, and heat and lot number. Packaging and preservation must comply with MIL-STD-129, ASTM A700, and RP001 standards. Delivery is set for destination at SRF-JRMC Yokosuka, Japan, with a required delivery date of May 22, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Metal Tube Fabrication

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Metal Sheet Supply for NSN 9535-00-232-1882This subcontract for the Nuclear Reactor Program within the Department of Defense involves the supply of 3,000 units of metal sheet under NSN 9535-00-232-1882. The contractor must ensure all materials meet strict military specifications, provide full material traceability, and adhere to MIL-STD-129 marking requirements. Delivery is set as FOB Origin and must be completed within 105 days after the order is placed. The procurement falls under NAICS code 331221 and is associated with performance at Hill AFB in Utah. The solicitation was posted on August 27, 2026, with a response deadline of September 8, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Domestic Material Sourcing and Supply Chain TraceabilityThe Defense Logistics Agency is seeking a subcontract for the supply of domestically sourced spring steel. The primary requirement is the provision of full traceability documentation to ensure strict compliance with the Buy American Act, the Berry Amendment, and DLA Directive C03. This procurement falls under NAICS code 331221 and is managed by the Department of Defense. The response deadline for this opportunity is September 8, 2026, with the place of performance located in Greensboro, North Carolina. Interested parties must ensure all materials meet the specified domestic sourcing standards to be eligible for the contract.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Raw Materials for Precision ScrewsThe Department of Defense, through the ASC Commodities Division, is seeking a subcontractor for the supply of certified, traceable high-grade alloy or stainless steel wire or bar stock. These raw materials must be suitable for the machining of aerospace-grade close tolerance screws. The contract is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 331221. The performance location for this requirement is Robins Air Force Base, zip code 31098-1887. The solicitation was posted on August 27, 2026, with a response deadline of September 1, 2026. Interested parties can find further details via the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 14 hours

Specialty Alloy Steel Raw Material SupplyThis subcontract opportunity with the Department of Defense ASC Commodities Division involves the supply of certified alloy steel bar stock or forging blanks. The materials must meet MIL-DTL-47023 or equivalent specifications to be used in the production of bolts. This procurement falls under NAICS code 331221. The contract is designated as a Total Small Business Set-Aside under FAR 19.5. Interested parties must submit their responses by the deadline of September 4, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2171

This contract is for the procurement of two units of corrosion-resistant 316L steel plate, hot rolled and annealed. Each plate must measure 0.375 inches thick, 72 inches wide, and 240 inches long, with a reference weight of 1873.2 lbs per unit. The material must be supplied in whole feet lengths and comply with ASTM A240/A240M-26, ASTM A700-14, and SAE AMS2807C standards. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Strict marking and packaging standards are enforced per MIL-STD-129 and ASTM A700, requiring detailed identification including the contract delivery order number, NSN, and heat/lot numbers. Delivery is set for the DLA Distribution New Cumberland facility with a required delivery date of January 18, 2027.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

GOGGLES, INDUSTRIAL

Solicitation # SPE86-26-T-4370

This contract is for the procurement of 130 units of industrial goggles under solicitation number SPE8E6-26-T-4370. The items are identified by NSN 4240-01-477-5380 and correspond to part numbers 1VT68 from W.W. Grainger, Inc. or VGS-1011 from Saf-T-Gard International, Inc. Delivery is required within 17 days after order, with a need ship date of September 26, 2026, and an original required delivery date of January 9, 2027. The shipment is destined for the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with FOB origin terms. Packaging must adhere to DLA packaging requirements and MIL-STD-129 for marking and labeling, utilizing ASTM D3951 for non-hazardous commercial packaging. Inspection and acceptance will take place at the destination. The contract incorporates specific technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Raw Materials or Subcomponents for Hood AssemblyThe ASC Commodities Division of the Department of Defense is seeking a subcontractor for the supply of domestic-sourced raw materials and subcomponents, including metal stock, fasteners, and gaskets, required for the fabrication of floodlight hood assemblies. This contract emphasizes the necessity for full traceability and strict compliance with sourcing standards. This opportunity is designated as a total Small Business Set Aside under NAICS code 331221. Interested parties must submit their responses by the deadline of September 3, 2026, following the posting date of August 27, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Carbon Steel Forged Cap (ASTM-A105)

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

On-Demand Repair Services for Aerial PlatformsThis subcontract for On-Demand Repair Services for Aerial Platforms is issued by the Department of Defense under the agency W6QK Acc Wva. The contractor will provide hourly repair services to address mechanical, hydraulic, or electrical failures on aerial lifts at the performance location in Watervliet, New York. The scope of work anticipates approximately 25 hours of service per year, with a total annual funding cap of 5,000 dollars. This opportunity falls under NAICS code 811490 and requires responses by September 4, 2026.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Preventative Maintenance of Aerial Lifts (Scissor Lifts & Man-Lifts)This subcontract opportunity with the Department of Defense involves providing annual preventative maintenance and safety inspections for eight aerial platforms, specifically scissor lifts and man-lifts. The scope of work includes performing oil changes, greasing, and comprehensive mechanical checks to ensure all equipment remains compliant with ANSI A92 standards. The project is located in Watervliet, New York, under NAICS code 811111. Interested parties must submit their responses by September 4, 2026, at 5:00 PM.

General Automotive Repair

POSTED

DEADLINE

ANNUAL PREVENTATIVE MAINTENANCE ON AERIAL PLATFORMS per ANSI A92 for Watervliet Arsenal NY..

Solicitation # W911PT-26-Q-A131

This contract is for the annual preventative maintenance of eight Genie aerial work platforms located at the Watervliet Arsenal in New York. The scope of work includes servicing three scissor lifts and five man-lifts in accordance with ANSI A92 standards. The agreement covers a base period with two optional extension years and requires pricing for the specific equipment groups as well as an hourly rate for additional repairs and maintenance outside the standard preventative scope, estimated at 25 hours per year. The project is managed by the Department of Defense under NAICS code 811310 and adheres to Service Contract Labor Standards Wage Determination No. 2015-4143. Technical inquiries are directed to Daniel Belk, while the primary point of contact is Dave DeAnda. Responses for solicitation W911PT-26-Q-A131 are due by September 4, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Chrome Plating and CARC Painting of Calibration StandardsThis subcontract opportunity with the Department of Defense, specifically W6QK Acc Wva, requires the application of chrome plating to the internal diameter and Chemical Agent Resistant Coating paint to the external diameter of two out of four calibration standards. All work must be performed in accordance with military finish specifications at the place of performance in Watervliet, New York. The project is designated as a total Small Business Set Aside under NAICS code 332812. Interested parties must submit their responses by the deadline of September 1, 2026, following the posting date of August 25, 2026.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

in about 14 hours

EDM Notching and Flaw Simulation for Calibration StandardsThis subcontract, issued by the Department of Defense through W6QK Acc Wva, involves the precision electro-discharge machining of artificial flaws into calibration standards. The primary objective is to simulate 3/64-inch and 5/64-inch equivalent defects to support longitudinal and angle beam ultrasonic inspections. The project is designated as a total small business set-aside under NAICS code 332813. Performance of the work will take place in Watervliet, New York. The solicitation was posted on August 25, 2026, with a response deadline of September 1, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

in about 14 hours

Precision Machining of Cannon Tube Calibration StandardsThe Department of Defense, through W6QK Acc Wva, is seeking a subcontractor for the precision machining of four ultrasonic testing calibration standards for 120mm and 155mm cannon tubes. All work must adhere to drawing 4297425, ensuring that the surface finish of the standards matches that of finished cannon tubes to allow for accurate calibration. This is a total small business set-aside subcontract under NAICS code 332710. The place of performance is located in Watervliet, New York. The solicitation was posted on August 25, 2026, with a response deadline of September 1, 2026.

POSTED

DEADLINE

in about 14 hours

UT Calibration Standard Package for the Watervliet Arsenal, NY 12189

Solicitation # W911PT26QA135

The Department of Defense is seeking a small business contractor to provide a UT Calibration Standards Package for 120mm and 155mm cannon tubes at the Watervliet Arsenal in New York. The deliverables must adhere to drawing 4297425 and the provided Statement of Work, with specific requirements noting that two of the four standards may necessitate chrome plating on the interior diameter and CARC paint on the outer diameter. This solicitation, numbered W911PT26QA135, is designated as a total small business set-aside under NAICS code 541380. All applicable labor must comply with Service Contract Labor Standards Wage Determination No. 2015-4143. Interested parties must submit their responses by the deadline of September 1, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

in about 14 hours

Logistics and Delivery ServicesThis subcontract for Logistics and Delivery Services, issued by the Department of Defense under the agency W6QK Acc Wva, involves the transportation and delivery of 90 cannon containers from the manufacturer to the Watervliet Arsenal in New York. The scope of work includes all necessary packaging and documentation to ensure the secure transit of the equipment. The delivery schedule requires 15 containers to be delivered per month following the approval of the first article. This opportunity is designated as a total Small Business Set Aside under NAICS code 484220, with a response deadline of September 8, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Quality Assurance and First Article Testing SupportThis subcontract opportunity with the Department of Defense involves providing quality assurance services and support for first article submissions at the Watervliet Arsenal. The scope of work includes performing inspections, managing documentation, and coordinating directly with government representatives to secure necessary approvals. The project is designated as a total small business set-aside under NAICS code 541330. Interested parties must submit their responses by September 8, 2026, for performance in Watervliet, New York.

Engineering Services

POSTED

DEADLINE

Precision Metal Fabrication and Container AssemblyThe Department of Defense, through W6QK Acc Wva, is seeking a subcontractor for the precision metal fabrication and assembly of 155mm cannon containers. The scope of work involves cutting, forming, welding, and finishing processes to ensure all units adhere to military specifications and technical drawing DWG 11580190. Performance of this contract will take place in Watervliet, New York. This opportunity is designated as a total small business set-aside under NAICS code 332439. The solicitation was posted on August 24, 2026, with a response deadline of September 8, 2026, at 8:30 PM.

Other Metal Container Manufacturing

POSTED

DEADLINE

Muzzle Brake Forgings, per Drawing # 12591141, Revision C, for 105mm M20 Cannon, for the Watervliet Arsenal

Solicitation # W911PT26QA132

The Department of Defense, through the Watervliet Arsenal, is soliciting bids for the procurement of 54 muzzle brake forgings designed for the 105mm M20 Cannon. All components must be manufactured in strict accordance with Drawing 12591141, Revision C. This requirement falls under NAICS code 332111 and will be performed in Watervliet, New York. Interested parties must submit their responses by the deadline of September 7, 2026. The solicitation, identified by number W911PT26QA132, is managed by the primary point of contact, Amanda Robinson.

Iron and Steel Forging

POSTED

DEADLINE

CONTAINERS FOR THE WATERVLIET ARSENAL

Solicitation # W911PT26QA128

This solicitation, issued by the Department of Defense under the agency W6QK Acc Wva, seeks the procurement of 90 M284 containers for the Watervliet Arsenal. The contract is designated as a total small business set-aside under NAICS code 321920, with performance taking place in Watervliet, New York. Interested parties must respond by September 8, 2026, at 8:30 PM. The procurement process includes a requirement for first article submission, though this may be waived. Primary coordination for this opportunity is managed by Brianne M. Denofio.

Wood Container and Pallet Manufacturing

POSTED

DEADLINE