This Government Contract opportunity from Department Of Defense was posted on March 23, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

46--Award Notice

Awarded

W91ZLK12T0106Federal

Submission Closed03/23/2012, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Federal

Non-Destructive Testing (NDT) and Inspection Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Testing ServicesThis subcontract opportunity with PM Construction & Rehab, LLC involves providing quality assurance and compliance testing for municipal sewer rehabilitation projects located in Shawnee, Oklahoma. The selected contractor will be responsible for performing critical technical evaluations, including pressure testing, leak detection, and soil compaction testing, to ensure all work meets project specifications. The primary deliverable for these services is the provision of certified test reports. The contract is specifically set aside for small businesses, including SBA certified Women-Owned Small Businesses and SAM.gov designated Small Disadvantaged Businesses, falling under NAICS code 541380. Interested parties must note the tight response window, with the solicitation posted on October 30, 2026, and a response deadline of November 2, 2026.

PM Construction & Rehab, LLC

POSTED

DEADLINE

Hydrostatic, Leak, and Non-Destructive Testing (NDT)

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Aircraft Fuel Cell Pressure and Leak Testing

Navsup Weapon Systems Support

POSTED

DEADLINE

Fire Flow Testing Services

Solicitation # 121589

The Washington Suburban Sanitary Commission (WSSC) is soliciting sealed responses for solicitation number 121589 to establish a Fire Flow Testing Services program. The contractor will be responsible for the planning, locating, inspection, and testing of fire hydrants and associated water distribution components across various pressure zones in Maryland to evaluate hydraulic performance. Key technical tasks include measuring static pressure, residual pressure, and flow rates, as well as performing traffic setup and maintenance for residential, county, and state roads. The project involves a base quantity of 1,500 fire flow tests, 3,000 hydrant inspections, and 3,000 valve inspections, with pricing options for three additional years. To be considered, bidders must possess at least five years of experience as a prime contractor and provide at least two crews, each led by a professional with three years of expertise. Crucially, at least one crew member must hold a current Maryland Water Distribution System Operator D-1 license. Bidders must also provide a comprehensive equipment list and adhere to AWWA and MDE standards, including specific requirements for chlorinated water discharge. The contract will be awarded to the lowest responsive and responsible bidder who meets all minimum qualifications. Submissions are due by November 30, 2026, via the WSSC eProcurement Portal. Contract administration includes strict quality assurance requirements, requiring the implementation of a QA/QC plan and immediate reporting of residual pressures falling below 20 psi. Contractors must maintain significant insurance coverages, including Commercial General Liability, Pollution Liability, and Errors and Omissions, each with limits up to 2,000,000 dollars. Payment is processed via ACH or procurement credit card within 30 days of acceptance. Additionally, the contract incorporates a Mid-Atlantic Purchasing Team clause, allowing other public entities to utilize the resultant contract terms and pricing.

Utility Services Department

POSTED

DEADLINE

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors on DLA Weapons Support ASC projects to validate the manufacturing of pins. The scope of work involves verifying the material composition, performance, and dimensional accuracy of sample units using precision measurement tools and testing facilities in strict accordance with DLA FAT standards. The final deliverables for this engagement include the tested sample unit and a certified First Article Test report. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 541380. Performance of these services will take place in Corpus Christi, Texas. Interested parties should note the response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract, titled First Article Testing and Validation Services, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves performing First Article Testing for prime contractors to ensure that initial production units meet strict close tolerance requirements and Navy-mandated safety specifications. Work is performed in San Diego and utilizes CMM and precision gauges to validate components before they are delivered for government approval. The selected contractor is responsible for providing comprehensive documentation and test results, culminating in the delivery of a First Article Test Report and an approved test unit. This effort falls under NAICS code 541380 and is critical for validating the quality and safety of supply contracts managed by DLA Weapons Support.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Quality Compliance & Certification ServicesThe Aerospace Quality Compliance and Certification Services subcontract involves providing technical verification and quality documentation audits for prime contractors supporting DLA Weapons Support ASC projects. The primary scope of work includes validating technical data against the DLA Master List of Technical and Quality Requirements and verifying Critical Application Item certifications specifically for ITT Aerospace part number 57802M. The selected provider must possess specialized expertise in AS9100 standards and DLA R and I quality codes to deliver comprehensive quality certification reports and compliance documentation packages. This Department of Defense requirement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California. The project falls under NAICS code 541380. Interested parties should note the response deadline of November 6, 2026, for this specialized aerospace quality assurance engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article and Production Lot Testing ServicesThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, requires an independent laboratory to perform critical testing and certification for prime contractors. The scope of work involves conducting First Article Testing and Production Lot Testing utilizing specialized equipment for material analysis, metrology, and hardness or stress testing. The selected provider will be responsible for delivering certified test reports and completing essential documentation, including DD Form 1222 and DD Form 250. The project is categorized under NAICS code 541380 and will be performed in Jacksonville, Florida. While not mandatory, ISO/IEC 17025 certification is preferred for this engagement. Interested parties must submit their responses by November 6, 2026, to support the quality assurance and certification requirements of DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract opportunity, issued by the Department of Defense for the DLA Weapons Support Aviation Supply Chain, involves performing First Article Testing (FAT) for internally relieved body bolts. The selected contractor will be responsible for validating the dimensions, material properties, and overall performance of a single sample unit against the technical data package. This process requires the use of Coordinate Measuring Machine (CMM) and material testing laboratory equipment to ensure full compliance. To qualify for Navy CSI validation, the contractor must hold AS9100 or ISO 9001 certification. The final deliverables for this project include a comprehensive FAT report and the return of the tested sample unit. This is a total small business set-aside under NAICS code 541380, with the place of performance located in Cherry Point. Responses are due by November 6, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves performing specialized testing and validation for prime contractors on DLA Troop Support aerospace projects. The scope of work requires the testing of three shoulder bolt units using metrology equipment to validate material properties and dimensions according to BAC drawings. The selected provider must apply sampling standards per MIL-STD-1916 or ASQ H1331, coordinate closely with the Quality Assurance Representative, and deliver a formal First Article Test Report. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. To be eligible for this contract, the provider must hold AS9100 certification. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation W91ZLK-12-T-0106 is a small business competitive procurement issued by the Department of Defense for the Water Treatment Plant located in the Edgewood area of Aberdeen Proving Ground, Maryland. The government seeks a contractor to provide all necessary certifications, equipment, tools, materials, labor, and vehicles required to perform laboratory certified water testing as specified in the Scope of Work. The contract is structured as a firm-fixed price purchase order. Interested offerors were required to submit proposals using the combined synopsis solicitation format, with all inquiries directed to the designated point of contact via email by the specified deadline. This procurement was conducted under the guidelines of Federal Acquisition Circular 05-53 and falls under NAICS code 541380.

General Info

Agency

Department Of Defense → W6QK Acc-Apg Director

Contract Value

$101,256

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Set-Aside

NONE

Awardee

COMMUNITY ENVIRONMENTAL LABS INC (103681404) 1202 TECHNOLOGY DR STE F ABERDEEN, MD 21001-1245

Award Issued Date

03/23/2012, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseAwarded

PostedFeb 27

Combined Synopsis

Notice updatedMar 8

The notice title changed. The notice description changed.

AwardedMar 23

Contract was awarded

Submission Closed

03/23/2012, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Apg Director

ContactsNo contacts available

OfficeABER PROV GRD, MD, 21005, USA

Organization / AgencyDepartment Of Defense → W6QK Acc-Apg Director

Office AddressABER PROV GRD, MD, 21005, USA

ContactsNo contact information available

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The combined synopsis/ solicitation number is W91ZLK-12-T-0106. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 05-53. This requirement is Small business competitive. The Government contemplates award of a Firm-Fixed Price purchase order. Description of Requirement: The intent of this contract is to provide all certifications, equipment, tools, material, labor, and vehicles to perform laboratory certified water testing as stated in the Scope of Work (SOW) for the Water Treatment Plant. The location of this plant is on the Edgewood area of Aberdeen Proving Ground. The testing to be performed along with the necessary certifications is found in the SOW. NOTES to Offerors: The combined synopsis solicitation shall be used as the format for submissions and signed on page one block 30. All Questions are to be submitted via e-mail to contact@example.gov no later than 3/13/2012 at the close of business, 4:30 PM Eastern Standard Time. Questions are to have the solicitation number and the word question in the subject line i.e."W91ZLK-12-T-0106 question" answers will be posted promptly. No questions will be addressed after the stated date and time. No questions will be answered via telephone. The Government reserves the right to cancel the referenced solicitation if deemed to be in its best interest.