4630--BSL: Sewer Cleaning Machine

Page 4 of 4 Combined Synopsis/Solicitation For 36C260-20-AP-3913 1. This is a combined synopsis/solicitation for a Sewer Cleaner Machine, Brand Name or Equal as prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation (RFQ36C26020Q0243) is being issued as a Request for Quotation. This notice and the incorporated provisions and clauses are those in effect through the Federal Acquisition Regulations (FAR). Simplified Acquisition Procedures IAW FAR 13 will be used. 2. This solicitation is set aside 100% for Service-Disabled Veteran-Owned Small Businesses. The North American Industry Classification System (NAICS) code is 333120 Construction Machinery Manufacturing, Size Standard 1250. Offerors must be registered in the Central Contractor Registration (CCR) at http://www.ccr.gov, in order to be considered for award. The Vendor shall be an Original Equipment Manufacturer (OEM) authorized dealer, authorized distributor, or authorized reseller for the proposed equipment/system such that the OEM warranty and service are provided and maintained by the OEM. All warranty and service associated with the equipment/system shall be in accordance with the OEM terms and conditions. The vendor shall provide new items ONLY; no remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. 3. FAR Clauses 52.212-1 through 52.212-5 apply to this procurement. For the exact text and wording of clauses and provisions please see http://farsite.hill.af.mil. The Government contemplates an award of a Firm Fixed Priced purchase order contract resulting from this solicitation. 4. Description of supplies: This requirement is for Southern Oregon Rehabilitation Center and Clinics for a Sewer Cleaner Machine. The Sewer Cleaner Machine is a lifecycle replacement of old equipment. Brand name or equal to Spartan 738 Hydro-Jet. Offerors must meet or exceed salient characteristics. Salient Characteristics The absolute minimum requirements for this equipment is as follows. 1. Requires ceramic plunger pump that delivers at least 2,000 PSI at 12 GPM 2. Must be maneuverable by one person when full water tank 3. Must work in pipes 3"-12" 4. Requires at least 250 feet of 3/8" high pressure cleaning hose 5. Requires at least 100 feet of 5/8" rubber supply hose 6. Must not weigh more than 875 lbs empty and 2,200 lbs full 7. Requires twin-cylinder, air-cooled gasoline engine at least 675cc 8. Requires at least 8-gallon fuel tank 9. Requires electric engine start, rear-mount operator controls & Auto low-water shutoff 10. Requires a wide-track chassis and 13" tires with spoke wheels 11. Must hold at least 150 gallons of water in tank 12. Requires Air-purge system to protect against cold weather 13. Requires locking toolbox 14. Requires at least 5 position nozzle holders 15. Requires folding jack stand with wheel 16. Requires12" nozzle anti-turn device and bright colored 15 ft lead hose for safety Line Item Description Quantity Unit Price Total Price 1 Spartan 738 Hydro-Jet Or Equal Item 1 _______ ________ 5. This combined synopsis & solicitation notice is a request for competitive quotations. Therefore, all capability statements or quotations received prior to the RFQ close date will be considered. 6. The Government will award a single purchase order contract resulting from this RFQ to the responsible offeror whose offer represents the best value in terms of technical capability and price. All non-price factors technical capability are significantly more important than price. 7. Offerors must submit representations and certifications in accordance with the provision at FAR 52.212-3 Offeror Representations and Certifications Commercial Item. (Accessible at the FAR Site, http://farsite.hill.af.mil) 8. Submit the following documents in response to this RFQ: a. Quotation Cover Page (See attached document) b. Technical Capability Statement c. Price Quotation (Attachment C) Offers are due on July 10, 2020 12:00 PM PST. All questions/inquiries must be submitted to the contract officer via electronic mail (e-mail) not later than 12:00 PM PST on July 10, 2020. Inquiries submitted via telephone calls will be re-directed to an e-mail submission. Submit offers or any questions to the attention of Ladell Holmes and copy via email to contact@example.gov respectively. Offerors who fail to complete and submit the requirements above may be considered non-responsive. NOTE: Both the Technical Proposal (10 pages maximum) and Pricing Proposal should be submitted as separate documents.