This Government Contract opportunity was posted on September 13, 2004. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

47 -- Metal Tube Assy

Awarded

FA8104-04-R-55599Federal

Submission Closed09/13/2004, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

DIBBS

Diesel Engine Block Assembly SupplierThis subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, requires the supply of four diesel engine block assemblies for prime contractors on government procurement projects. The assemblies must strictly conform to NSN 2815-01-330-8069 and adhere to MIL-STD-129 marking requirements. Additionally, the supplier must comply with FAR 52.246-2 and RQ011 standards regarding the removal of government identification, with delivery terms set as FOB Origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336412. Interested parties must submit their responses by November 9, 2026, following the posting date of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Pivot Shaft CoversThis subcontract involves the manufacture or sourcing of 20 Pivot Shaft Covers, identified by NSN 1615-00-565-5696, to support prime contractors delivering for the DLA Weapons Support Aviation Supply Chain. The selected provider must ensure all units are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, and MIL-STD-129. Performance of the contract will take place in Dulles, Virginia. To be eligible for this requirement, contractors must maintain an active SAM registration and have full access to the Wide Area Workflow system. The opportunity was posted on October 29, 2026, with a response deadline of November 6, 2026. The project falls under NAICS code 336412 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract involves providing First Article Testing services for prime contractors working on aircraft component projects for the Defense Logistics Agency Weapons Support ASC Supplier OE and AF Division. The primary objective is to execute testing per CLIN 0002 to ensure the first produced unit adheres to all technical specifications and performance requirements. Work is performed at Hill AFB and requires the use of non-destructive testing tools and precision measurement equipment. To qualify for this engagement, the provider must maintain AS9100 quality assurance certification. The final deliverables for the project include a comprehensive FAT Report and a formal certification of compliance. This effort falls under NAICS code 336412 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Frame Fabrication (NSN 1560013733402)This subcontract involves the fabrication and delivery of two aircraft frames under NSN 1560013733402 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div. The contractor is responsible for manufacturing the frames to exact OEM specifications using aerospace-grade materials and specialized tooling to achieve the required geometry. Compliance requirements include physical identification and bare item marking according to RQ017 and packaging standards per RP001. The work is categorized under NAICS code 336412, with the place of performance located at Hill AFB. The solicitation was posted on October 29, 2026, with a response deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Housing Assembly (NSN 2840001690069)This subcontract involves the procurement of one Housing Assembly, identified by NSN 2840001690069, to support prime contractors working under DLA Weapons Support ASC contracts. The selected provider is responsible for manufacturing or sourcing the assembly in strict accordance with the NSN technical data package, while ensuring all quality assurance and packaging and preservation requirements are met per standards RQ001 and RP001. The opportunity is issued by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division under NAICS code 336412. Interested parties must possess a valid CAGE code and UEI to be eligible. The response deadline for this requirement is November 6, 2026, and the final deliverable is one fully packaged and certified Housing Assembly.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Fuel Pump Valves (NSN 2915-00-886-6788)This subcontract involves the manufacture or procurement of six fuel pump valves under NSN 2915-00-886-6788 for prime contractors supporting DLA Weapons Support ASC projects. The work is performed for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Division, with the place of performance located at Tinker AFB. The contractor must adhere to strict technical standards, including marking per MIL-STD-129 and sampling per MIL-STD-1916 or ASQ H1331. A critical requirement of this contract is the ability to manage Air Force Critical Safety Item quality assurance and traceability. Final deliverables include the completed valves accompanied by comprehensive quality sampling reports.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Oil Strainer Sleeves (NSN 2840-00-839-0463)This subcontract involves the manufacture or sourcing of two oil strainer sleeves under NSN 2840-00-839-0463 for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider is responsible for ensuring all items undergo physical identification and bare item marking according to RQ017 standards, while removing any non-accepted government identification as specified by RQ011. All deliverables must be packaged in strict accordance with DLA requirement RP001. To be eligible for this contract, the provider must maintain a valid CAGE code, Unique Entity Identifier, and active SAM registration. The opportunity is categorized under NAICS code 336412, with a response deadline set for November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Piston and Insert (NSN 2915-00-837-4057)This subcontract involves the supply of 14 precision-manufactured piston and insert units under NSN 2915-00-837-4057 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The manufacturer must adhere to strict technical specifications, including TDP Rev B Gen 2 and Drawing NR 73030 69474 Rev AD. Performance will take place at Tinker AFB, with delivery terms set as FOB Origin. The contractor is required to maintain a valid CAGE code and ensure all components meet Air Force Critical Safety Item standards, necessitating formal CSI certification. Additionally, all deliverables must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging to ensure military grade quality and traceability.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Flyweight Assembly Supplier

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

VALVE ASSEMBLY, THERMAL

Solicitation # SPE7M4-27-T-0688

Solicitation SPE7M4-27-T-0688 is a fixed-price procurement issued by the DLA Weapons Support Fluid Handling Division for 11,000 units of thermal relief fuel valve assemblies (NSN 2915-00-949-6398). The contract specifies a delivery period of 164 days with shipping terms as FOB Origin, destined for the DLA Distribution Depot Oklahoma at Tinker AFB. Due to the proprietary nature of the technical data, no approved technical data package is currently available from DSCR. Quality assurance is stringent, requiring sampling in accordance with MIL-STD-1916, ASQ H331, or comparable zero-based plans, with inspection and acceptance both occurring at the destination. Compliance requirements include CMMC Level 2 self-assessment, adherence to the Buy American and Balance of Payments Program, and strict packaging and marking standards per ASTM D3951 and MIL-STD-129. All DLA Master List of Technical and Quality Requirements take precedence over general packaging standards. Invoicing must be processed electronically through the Wide Area Workflow system. The procurement falls under NAICS code 336412 and requires offerors to be registered in the System for Award Management.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1580

Solicitation SPE7L3-27-T-1580 is a small business set-aside procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 21 units of pressure bellows, identified by NSN 3010012005475 and Woodward Inc. part number 5216-146. This critical application item is classified as a commercial product under NAICS code 336412. The contract specifies a delivery timeline of 666 days after order, with a need ship date of September 6, 2028, and an original required delivery date of May 24, 2029. Shipping is designated as FOB Origin, with the final destination and inspection point located at the DLA Distribution Depot Oklahoma at Tinker AFB. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical requirements take precedence. Palletization must comply with RP001. Key regulatory requirements include a prohibition on Class I ozone-depleting chemicals and mandatory compliance with CMMC Level 2 self-assessment and NIST SP 800-171 standards for cybersecurity. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment for domestic sourcing. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, via the DIBBS portal.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2088

Solicitation SPE4A5-27-T-2088 is a request for quotation issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of one Housing Assembly, identified by NSN 2840001690069 and part number 3020137. This is a Foreign Military Sales requirement for Turkey, with a required delivery date of October 27, 2026, and a delivery lead time of 20 days after order. The item is designated as a critical application item, and the contract specifies FOB Origin terms. Shipping is coordinated through A.J. Worldwide Services in Secaucus, New Jersey, for final delivery to the 5th Main Maintenance Factory Directorate in Guvercinlik, Turkey. The contract mandates strict quality and technical compliance, requiring the manufacturer's inspection system to meet ISO 9001:2015 or an equivalent standard. Inspection and acceptance will occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129. Key regulatory requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The procurement is governed by a variety of FAR and DFARS clauses, including those related to cybersecurity, safeguarding covered defense information, and the prohibition of hexavalent chromium.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days

AI Contract Overview

This contract modification updates the sole source supplier for Metal Tube Assemblies from Unison Industries to Pratt & Whitney. The procurement covers quantities of 35, 70, or 105 units of part number 4087040-01, designed to supply air to the number 4 bearing compartment of F100PW100/200/220/220E engines. These steel tubes measure 16.180 inches in length with a 1.000 inch outside diameter and 0.035 inch wall thickness, with delivery scheduled for November 2004 to Tinker AFB, Oklahoma. The solicitation process prohibits telephone requests, and the government has noted that drawings and qualification requirements are currently unavailable. To be eligible for the award, offerors must be approved sources, and the submission of Source Approval Requests is encouraged. An ombudsman has been appointed to handle contractor concerns during the proposal phase, though this individual does not participate in the final source selection or evaluation process.

General Info

Agency

N/A

Contract Value

$72,240

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

PUROLATOR FACET8439 TRIAD DRIVE GREESNBOBO NC 27409-9018

Award Issued Date

09/13/2004, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

4 updates

PhaseAwarded

PostedApr 19

Presolicitation

Notice updatedApr 20

The notice description changed.

Notice updatedApr 27

The notice description changed.

Notice updatedApr 30

The notice description changed.

Notice updatedJul 2

The notice description changed.

AwardedSep 13

Contract was awarded

Submission Closed

09/13/2004, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

The purpose of this mod it to correct the sole source supplier from Unison Ind to Pratt & Whitney. NOUN: Metal Tube Assy; NSN: 4710-01-508-7847NZ; P/N: 4087040-01; QTY: 35 or 70 or 105; U/I: Each; DELIVERY: November, 2004 to Tinker AFB OK; APPLICABLE TO: F100PW100/200/220/220E Engines; SIZE/DIMENSIONS: 16.180 inches long; Outside diameter 1.000 inches; Wall thickness 0.035 inches; PREDOMINANT MATERIAL: Steel, type 1, Spec PWA 770 SST or AMS 5556 SST or AMS 5570 SST or AMS5571 SST; FORM/FIT/FUNCTION: To supply air to the #4 bearing compartment; Anticipated Solicitation Issue Date: 5 May 2004; Anticipated Award Date: 31 June 2004.No telephone solicitaton requests well be accepted. Qualification Requirements (QRs) are not available at this time nor does the Government have in its pocession drawings or drawing notes for this item. To be eligible for contract award, offerors must be approved sources. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of the SAR when the contract is awarded, the SAR will be retained and the source will be reviewed for possible Source Approval for future awards. Government Furnished drawings are not available. The award is expected to be made to sole source supplier Unison Industries. Authority: 10 U.S.C. 2304(c)(1). NOTE: An ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the ombudsman is not to diminish the authority of the Program Manager or Contracting Officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate Government personnel. When requested, the ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at +1 (555) 000-0000. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Notes 22, 23,26 apply