PARTS KIT, HOSE ASSE

PARTS KIT,HOSE ASSE
PARTS KIT,HOSE ASSEMBLY
SHELF-LIFE MARKINGS REQUIRED PER 5.2.1 OF MIL-STD-129: SHELF-LIFE
MARKINGS SHALL BE SHOWN AS PART OF THE ITEM IDENTIFICATION DATA ON UNIT
PACKS, INTERMEDIATE CONTAINERS, EXTERIOR CONTAINERS, AND UNPACKED ITEMS.
SHELF-LIFE MARKINGS SHALL INCLUDE THE MANUFACTURED, CURED, ASSEMBLED OR
PACKED DATE (APPLY ONE DATE), AND THE EXPIRATION OR INSPECT/TEST DATE,
AS APPROPRIATE.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
FAR 52.246-11, HIGHER LEVEL CONTRACT QUALITY
REQUIREMENTS, APPLIES/ISO 9001/ANSI/ASQC
Q 9001 APPLIES.
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
FULL AND OPEN COMPETITION APPLY
"REFERENCE MATERIAL-INCLUDES HANDBOOKS,
MANUALS, PRICE LISTS, REGISTRIES, DIRECTORIES,
BOOKS, ETC."
THIS ITEM SUBJECT TO CONFIGURATION CONTROL.
FURNISHED ITEM MUST CONFORM TO THE CITED
REVISION OF THE CONTRACTOR DEVELOPED DRAWING FOR
THIS PART. DIFFERENCES FROM THE CITED CONTRACTOR
SPE7M4-27-T-2027
SECTION B
DRAWING REVISION MUST BE IDENTIFIED IAW THE
CURRENT REVISION OF MIL-STD-973 AND APPROVALOF
SUCH DIFFERENCES OBTAINED.
ITEM SHALL BE BARE ITEM MARKED IAW THE CURRENT
REVISION OF MIL-STD-130.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
Shelf-life Additional Requirements
RS030: Shelf-life requirement RS001 for a TYPE I (CODE W) item with a shelf life of 120 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 97403 13230E5873 REVISION NR B DTD 04/02/2004 PART PIECE NUMBER: 13230E5873-101
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13230E6053 REVISION NR B DTD 03/22/2000 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13230E5880 REVISION NR E DTD 08/22/2000 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13230E5899 REVISION NR B DTD 07/28/1998 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 97403 13230E5873-101 REVISION NR DTD 12/31/2025 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE QAP 16236 SQAPMILPRF53064 REVISION NR DTD 03/30/2016 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-53064C REVISION NR C DTD 09/13/2017 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M4-27-T-2027
SECTION B
PR: 7017226458 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017226458 0001 KT 9.000
NSN/MATERIAL:4720014570681
DELIVERY (IN DAYS):0425
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE
I/A/W THE LATEST REVISION OF MILITARY
SPECIFICATION MIL-STD-2073-1 APPENDIX D,
FOR PACKAGING OF "KITS".
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/14/2027 Original Required Delivery Date:10/14/2027
SPE7M4-27-T-2027
SECTION B
PR: PRLI: CONT’D
CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0030
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000
SPE7M4-27-T-2027 NSN/Part Number: 4720-01-457-0681 Quantity: 9 KT Purchase Request: 7017226458QTY: 9 Delivery: 425 days ADO