This Award Notice opportunity was posted on March 22, 2006. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

47 -- Tube Assembly, Metal

Awarded

FA8104-06-Q-0089Federal

Submission Closed03/10/2006, 07:00:00 AM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

DIBBS

Manufacture of Rotor Transmission Metallic Particle DetectorsThis subcontract involves the fabrication and assembly of 39 metallic particle detectors for rotor transmission projects under the DLA Weapons Support ASC. The scope of work includes machining detector housings and integrating sensing elements in strict accordance with OEM specifications for Boeing part number 145DS015-5 or Eaton part number B4386A. All delivered units must be marked and tested according to MIL-STD-130N standards. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 certification, achieve CMMC Level 2, and ensure full ITAR compliance. The project falls under NAICS code 336412 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ignition Modulator Assembly ManufacturingThis subcontract involves the manufacture of 38 completed and tested Ignition Modulator Assemblies for prime contractors supporting the Department of Defense under the DLA Weapons Support Land Supplier Operations Engines agency. The contractor is required to fabricate units according to NSN 2920-01-657-5525 specifications and the DLA Master List of Technical and Quality Requirements RA001. Additionally, all units must adhere to MIL-STD-129 for marking and ASTM D3951 for packaging, with a strict prohibition on additive manufacturing unless authorized by the ESA. The project is designated as a Total Small Business Set-Aside under NAICS code 336412, with performance taking place in New Cumberland. Interested parties must respond by November 19, 2026, following the posting date of November 8, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Transmission Clutch Plate Retainer ManufacturingThis subcontract involves the manufacture and supply of 13 Transmission Clutch Plate Retainers for prime contractors supporting the DLA Weapons Support ASC. The project requires the production of part number 23091257 per NSN 2520-01-737-7674 specifications, utilizing precision machining to adhere to strict aerospace tolerances. All items must comply with RQ017 Physical Identification and Bare Item Marking standards. The contract mandates strict quality control with a zero-non-conformance requirement under MIL-STD-105/ASQ Z1.4 and full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336412. The response deadline for this Department of Defense requirement is November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Machining of Fuel Injector Spray TipsThis subcontract involves the precision machining of 50 fuel injector nozzle spray tips for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The manufacturer is required to fabricate components using precision CNC machining centers in strict accordance with basic drawing NR 99207 5046T91 Revision AD and quality assurance provision QAP 13873 QAP-E09. Performance will take place in San Diego, California. To qualify, the contractor must hold SAE AS9100 and CMMC Level 2 certifications. Additionally, all materials used in production must comply with the Buy American Act and the Berry Amendment. This opportunity is designated as a total small business set-aside under NAICS code 336412.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Sealing Plug AssembliesThis subcontract involves the manufacture of 20 precision sealing plug assemblies for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to machine components according to Rolls-Royce P/N 23052992-02 specifications for Critical Application Items. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, with bare item marking performed in accordance with RQ017. The performing entity must maintain ISO 9001:2015 certification to ensure industry standard quality management. The work will be executed in New Cumberland, Pennsylvania, under NAICS code 336412. The procurement process is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture and Supply of Rigid Connecting Links (NSN 3040016024137)This subcontract involves the manufacture and supply of 297 rigid connecting links under NSN 3040016024137 for the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for fabricating parts to precise technical specifications while adhering to Navy Critical Safety Item standards to ensure strict quality assurance and traceability. All items must be packaged and labeled according to MIL-STD 129, and safety data sheets must be provided in compliance with 29 CFR 1910.1200(g). To be eligible for this contract, the provider must hold CMMC Level 2 and CSI certifications. The work is associated with NAICS code 336412 and will be performed in Cherry Point. Interested parties must respond by November 16, 2026, to support prime contractors delivering these essential components to the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Valve Crank Arms (NSN 2995-011709375)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the manufacture and supply of 17 valve crank arms, identified by NSN 2995-011709375. The components are intended for prime contractors on aerospace procurement projects and must be produced using additive manufacturing or advanced machining techniques. All delivered units must strictly adhere to Engineering Support Activity acceptability standards to ensure operational compliance. The contract stipulates a delivery timeline of 171 days from the date of the award, with the place of performance located at Tinker AFB. Interested parties must have noted the response deadline of November 16, 2026. The project falls under NAICS code 336412, focusing on the specialized production of these critical mechanical components for aerospace applications.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Machining and Fabrication of Support and Inserts (NSN 2915-00-962-9035)This subcontract involves the precision machining and fabrication of eight certified Support and Inserts under NSN 2915-00-962-9035 for the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of CNC machining centers and strict adherence to technical data to produce high-precision components for prime contractors. Compliance with the Buy American Act and the Berry Amendment is mandatory for all materials and processes. To qualify, the contractor must hold SAE AS9100 certification to meet Air Force Critical Safety Item protocols. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 336412. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturing of Bleed Valve Strap Seats (NSN 2840-01-018-0480)This subcontract involves the manufacture of 1,579 precision aviation bleed valve strap seats for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for fabricating parts in strict accordance with Reference Drawings 77445 PWA310, PWA360, and VIS-46, as well as QAP 77445 MQR-PSD-1. Performance will take place at Tinker AFB, with all units required to be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. To be eligible, the provider must maintain CMMC Level 2 certification and adhere to either SAE AS9003 or ISO 9001 quality systems. The project falls under NAICS code 336412 and is managed by the Department of Defense. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

SPRAY TIP, NOZZLE, FUEL

Solicitation # SPE4A7-27-T-3529

Solicitation SPE4A7-27-T-3529 is a Request for Quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 50 fuel injector nozzle spray tips. This item is designated as a Navy Identified Critical Safety Item and a Critical Application Item, requiring strict adherence to basic drawing NR 99207 5046T91 Revision AD and quality assurance provision QAP 13873 QAP-E09. The procurement mandates a high standard of quality management, requiring compliance with SAE AS9100 and CMMC Level 2 cybersecurity certification. Delivery is required within 120 days, with a need ship date of March 17, 2027, and a final delivery date of January 26, 2028, to DLA Distribution San Diego. The contract is not a small business set-aside, though offerors must provide representations regarding their business size and socioeconomic status. Key compliance requirements include the Buy American Act, the Berry Amendment, and restrictions on covered telecommunications equipment. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must include a Safety Data Sheet. Inspection is required at the origin per FAR 52.246-2. For administration, the contractor must use the Wide Area WorkFlow system for invoicing and payment, and all contractors must register via the Account Management and Provisioning System to access the Vendor Shipment Module.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SEAT, BLEED VALVE STRAP

Solicitation # SPE4A1-27-T-0317

Solicitation SPE4A1-27-T-0317 is a small business set-aside procurement issued by the DLA Weapons Support Aviation Supply Chain for the acquisition of 1,579 units of a bleed valve strap seat, identified by NSN 2840-01-018-0480. The contract specifies a delivery period of 171 days after order, with a required delivery date of December 13, 2027, and shipping terms set as FOB Origin to Tinker AFB, Oklahoma. The procurement is governed by NAICS code 336412 and requires the use of the Wide Area WorkFlow system for all electronic payment requests and receiving reports. Compliance requirements are stringent, including mandatory CMMC Level 2 certification and adherence to ITAR or EAR export control regulations for technical data. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific requirements for bare item marking and physical identification. Quality assurance is managed through origin inspection and acceptance, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with a standard of zero non-conformances for acceptance. The contract further incorporates various FAR and DFARS clauses regarding cybersecurity safeguarding, the prohibition of certain telecommunications equipment, and domestic material preferences under the Buy American Act.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-3445

Solicitation SPE4A7-27-T-3445 is a Request for Quotations issued by the DLA Weapons Support ASC for the procurement of 33 oxygen mask assemblies, identified as NSN 1660-01-479-5621. This item is designated as an Air Force Critical Safety Item (CSI), requiring the manufacturer to maintain a quality management system compliant with SAE AS9100 or an equivalent standard. The contract mandates a First Article Test (FAT), requiring the delivery of 3 units to the Materials and Textiles Lab at Wright Patterson AFB within 120 calendar days of the contract date. The government will then notify the contractor of approval or disapproval within 90 days of receipt. The procurement is subject to strict domestic material restrictions, including the Buy American Act and the Berry Amendment, with a reduced threshold of $150,000. Offerors must certify they will not provide covered defense telecommunications equipment or services and must comply with DFARS 252.204-7012 regarding the safeguarding of covered defense information. All supplies must be marked according to MIL-STD-129 and packaged per MIL-STD-2073-1E. Inspection and acceptance are conducted at the point of origin, utilizing a zero-based sampling plan. All quotes must be submitted via the DIBBS portal, and payment processing is handled through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days

AI Contract Overview

Solicitation FA8104-06-Q-0089 is a request for the procurement of metal tube assemblies for use on F100-PW-100, 200, and 220E engines. The required components are 18 inches in length with a 0.875 inch diameter, manufactured from AMS 5646 steel. The contract specifies a quantity range between 1 and 72 units, with delivery expected at Tinker Air Force Base by July 2006. This is a source-controlled procurement, meaning only qualified sources listed in the solicitation are eligible for award. Non-approved sources or those who have not delivered within the last three years are subject to first article requirements. Potential bidders must meet all qualification standards in accordance with FAR 9.202(A) and FAR 52.209-1 at the time of award. The government has appointed an Ombudsman to handle contractor concerns during the proposal phase, and all solicitation requests must be submitted in writing or via fax.

General Info

Agency

N/A

Contract Value

$23,328

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

CT, USA

Set-Aside

NONE

Awardee

E.A. PATTEN CO LLC

Award Issued Date

07/17/2006, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseAwarded

PostedDec 21

Presolicitation

Notice updatedJan 20

The notice description changed.

AwardedJul 17

Contract was awarded

Submission Closed

03/10/2006, 07:00:00 AM EST

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Stephen V Yates

contact@example.gov

+1 (555) 000-0000

Full Description

OC-ALC/448TH PSG/PKA/ DIR CONTRACTING/PROPULSION 3001 STAFF DR STE 1AC1/112A TINKER AIR FORCE BASE OK 73145-303247'METAL TUBE ASSY SOL FA8104-06-Q-0089 DUE 13 FEB 2006 OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact Stephen Yates/448th PSG/PKA/ +1 (555) 000-0000 Item 0001 NSN 4710-00-283-4999NZ, P/N: 4031284. Size: 18'L X 0.875'dia. Form/Fit/Function: Item used on the F100-PW-100/200/220E engine. Predominant Material: AMS 5646 steel. Quantity range 1-24, 25-48, 49-72 each. Applicable to: F100PW100/200/220/220E Engine. Destn: Tinker Air Force Base Ok 73145-3032. Delivery: Jul 06 or before. FIRST ARTICLE REQUIREMENT for non-approved sources or those that have not delivered within 3 years. This is a source- controlled item. Only sources listed are qualified. Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained as described in the solicitation. These qualification requirements apply to line item(s) 0001. The approximate issue date will be 13 JAN 2006. Written procedure will be used for this solicitation. To: United Technologies Corp, East Hartford Ct 06118-1888 and E.A. Patten Co, Manchester CT 06040-6349. No telephone requests. Only written or faxed requests received directly from the requestor is acceptable. All responsible sources solicited may submit a bid, proposal, or quotation, which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. Award will not be held in abeyance pending qualification of other sources. Potential sources are not to utilize intellectual property of third parties without appropriate authorization of the intellectual property owner. Potential sources are cautioned that no part of the Government qualification requirement is intended to endorse or encourage the improper use of intellectual property developed by the Original Equipment Manufacturer of any other third party. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at +1 (555) 000-0000. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER +1 (555) 000-0000. See Note (s) 23,26.