This Solicitation opportunity from Department Of Defense was posted on May 26, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

4730 - ELBOW

Awarded

N0040623Q0619Federal

Submission Closed06/09/2023, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-27-T-1822

Solicitation SPE7M1-27-T-1822 is a small business set-aside request for the procurement of one bypass valve hand, identified by NSN 4820015957205. The requirement is issued by the DLA Weapons Support Maritime Supply Chain with a required delivery date of November 3, 2026, and a delivery window of five days after award. This is a restricted source item requiring engineering source approval from the government design control activity, with approved sources including Control Solutions LLC and AMZ Alabama Inc. Delivery is specified as FOB Origin, with the shipping and parcel destination located at the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must follow DLA packaging requirements under RP001. Inspection and acceptance will occur at the point of origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Compliance with various FAR and DFARS clauses is required, including those regarding the Buy American Act, cybersecurity incident reporting, and the prohibition of Class I ozone-depleting chemicals. Offerors must be registered in the System for Award Management and may be subject to the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A7-26-Q-0400

Solicitation SPE4A7-26-Q-0400 is a small business set-aside request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Division for the procurement of five units of Filter, Coupler, identified by NSN 5865-01-227-0352. The required materials must be new and unused, with a delivery schedule of 327 days after order. Inspection and acceptance are both designated at the origin. The government will determine the best value based on a comparative assessment of price and non-price factors, with past performance, specifically SPRS assessments and historical quality and delivery compliance, weighted more heavily than quoted delivery. This procurement involves significant security and regulatory requirements, including the handling of export-controlled technical data subject to ITAR or EAR and the use of a classified drawing that will be provided upon award following the receipt of a completed DD Form 254. Contractors must comply with DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling, while packaging must adhere to ASTM D3951. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. Proposals must be submitted via the DLA Internet Bid Board System by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7M5-27-T-1136

Solicitation SPE7M5-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 21 pressure switches (NSN 5930010403448). This requirement is designated as a critical application item and is a total small business set-aside under NAICS 332919. Approved sources include ITT Aerospace Controls LLC (P/N 1125P4-1) and Cooper Interconnect, Inc. (P/N 6183-21). The need ship date is October 20, 2026, with an original required delivery date of January 21, 2027, for delivery to DLA Distribution San Joaquin in Tracy, California. Due to insufficient controlling drawings, potential sources must submit a comprehensive data package defining mechanical, physical, material, environmental, and electrical requirements, along with a proposed test plan based on industry or government standards; failure to do so will result in a technically nonresponsive rating. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 marking. Additionally, the contractor must comply with hazardous material labeling standards and a prohibition on the intentional addition of mercury. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

SLEEVE, FLARED, TUBE FIT

Solicitation # SPE7M3-27-T-0781

Solicitation SPE7M3-27-T-0781, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of 225 flared tube fitting sleeves, identified by NSN 4730-01-582-5387 and part number CBS-12-2-N-16F from Fatigue Technology, Inc. This commercial item procurement is assigned NAICS code 332919. The required delivery date and need ship date are both set for January 24, 2027, with a delivery period of 75 days. Shipping is FOB Origin, and the destination for both inspection and acceptance is DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements (specifically RA001 and RP001) taking precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Key regulatory clauses are incorporated, including FAR 52.246-2 for destination inspection and various DFARS clauses regarding the Buy American Act, cybersecurity reporting (DFARS 252.204-7012), and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M3-27-T-0499

Solicitation SPE7M3-27-T-0499 is issued by the DLA Weapons Support Fluid Handling Division for the procurement of 24 straight pipe-to-tube adapters under NSN 4730015439949. This is a critical application item and a Performance Review Institute QML or QPL item, requiring that the product be manufactured or assembled by an accredited manufacturer or distributor. Technical compliance must adhere to SAE AS4223B Revision B and SAE AS85421 Revision C. The contract prohibits the use of Class I ozone-depleting chemicals and requires the removal of government identification from non-accepted supplies. The delivery is set for 158 days after order, with shipping terms as FOB Origin and the destination point for both inspection and acceptance at the DLA Distribution New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and RP001, with labeling following MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted via the DIBBS portal by October 29, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

COUPLING HALF, QUICK DI

Solicitation # SPE7M3-27-T-0511

Solicitation SPE7M3-27-T-0511 is a fixed-price requirement issued by the DLA Weapons Support Fluid Handling Division for the procurement of one Quick Disconnect Coupling Half, identified by NSN 4730015384235. The item must be manufactured in accordance with Basic Drawing NR 89256 8214609 Revision B. Delivery is required within 20 days of award, with an original required delivery date of October 15, 2026. The shipment is designated as FOB Origin and is destined for the USS SHOUP DDG 86. Both inspection and acceptance will take place at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special environmental restrictions are in place, prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Payment must be processed electronically through the Wide Area Workflow system. The procurement is open to full and open competition, with a price evaluation preference for HUBZone small businesses. Offerors must submit quotes via DIBBS and maintain active registration in the System for Award Management.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0769

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one quick coupling half, identified by NSN 4730-01-579-8245. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 31, 2024. The item is to be delivered FOB Origin to the Armament Inspectorate in Warszawa, Poland. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically prohibiting the use of additive manufacturing unless authorized and restricting the intentional addition of mercury or mercury-containing compounds. Compliance requirements are extensive, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance are both set at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation is open to full and open competition, with specific price evaluation preferences noted for HUBZone small business concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010424QBM87

This solicitation, number N00104-24-Q-BM87, is issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, PA, for the procurement of one Valve Stem, TTV (NIIN: 016320195). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and risk assessments from the Supplier Performance Risk System. The procurement is a DO rated order for national defense and emergency preparedness, and it requires adherence to the Buy American and Balance of Payments Program. The contractor must comply with strict technical and quality standards, including the Individual Repair Part Ordering Data (IRPOD) and higher-level quality requirements under MIL-I-45208. Packaging must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification per MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. The response deadline for quotes is November 30, 2026, and submissions are accepted via email or NECO.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QFE70

This procurement is a Request for Quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the acquisition of seven globe valves, identified as National Stock Number 4820-01-211-8826. These components are designated as Critical Safety Items and Special Emphasis material Level I, meaning they are used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this designation, the contract mandates rigorous quality assurance, including strict material traceability, quantitative chemical and mechanical analysis for specific parts, and the submission of a comprehensive certificate of compliance. The contract requires final delivery within 365 days on an FOB Destination basis. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Technical requirements include adherence to specific Swagelok process drawings and various ASTM and MIL standards, with a particular emphasis on pressure testing and thread inspection. All payment requests and receiving reports must be processed through Wide Area Workflow, and the contractor must maintain a validated Quality Control Manual to be eligible for award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

47--CONNECTION,FLEXIBLE

Solicitation # N0010426QYAGN

Solicitation N0010426QYAGN, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the manufacture and delivery of flexible connections (NSN 4730-01-144-5975). The required items must conform to the design represented by Cage Code 18444, reference number 299941-100. A critical technical requirement is that all materials must be mercury-free, as they are intended for use on submarines and surface ships. The government retains an option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt at the same price. The closing date for the receipt of offers has been extended via multiple amendments to December 14, 2026, at 4:30 PM local time. The resulting award will be a bilateral agreement requiring written acceptance from the contractor. Offerors who are not the Original Equipment Manufacturer must provide the OEM's company name, CAGE code, and a signed letter of authorization. Evaluation of quotations will be based on supplier performance risk via the Supplier Performance Risk System (SPRS) and compliance with Buy American and Trade Agreements policies. Quality assurance requires inspection and acceptance at the origin, with mandatory physical identification per MIL-STD-130 and packaging according to MIL-STD-2073. Invoicing and payment must be processed electronically through the Wide Area Workflow (WAWF) system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE98

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates strict quality assurance, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane, both requiring rigorous quantitative chemical and mechanical analysis. Key technical requirements include hydrostatic testing for each ball at 1875 PSI for 30 minutes, with dye penetrant inspection as an acceptable substitute for manufacturers lacking test fixtures. All welding and brazing must adhere to specific S9074 and 0900-LP standards, requiring prior approval of qualification data. The contractor must submit a Certificate of Compliance and all objective quality evidence via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard for review and acceptance before shipping. Final inspection follows a zero-defect acceptance policy, with sampling based on ANSI/ASQ-Z1.4. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. Packaging must comply with MIL-STD-2073-1, and all shipments must be prepaid to the destination. Offerors must provide a Quality Assurance Manual to be eligible for award and must certify that the materials are mercury-free. All configuration changes or deviations require formal review and approval by the Contracting Officer through Engineering Change Proposals or waiver requests.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM127QKA47

Solicitation SPRMM1-27-Q-KA47, issued by the Defense Logistics Agency Weapons Support Mechanicsburg, is a request for quotation for the manufacture and delivery of one DELTA-P IND ASSY (NSN 4820-01-664-2911). The item must be produced according to the design represented by Cage Code 99517, reference number 12052305-005, and must be strictly mercury-free for use on submarines and surface ships. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations utilizing the Supplier Performance Risk System to assess item, price, and supplier risk. The contractor is responsible for all inspection and acceptance at the source, and must maintain inspection records for 365 days following final delivery. Packaging must adhere to MIL-STD-2073-1 for stock shipments or ASTM D3951-18 for immediate use, with physical identification complying with MIL-STD-130. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors are required to identify the Original Equipment Manufacturer and provide quantity price breaks. Additionally, the contract mandates CMMC Level 1 self-certification and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic preferences, and labor standards.

SPRMM1 DLA Mechanicsburg

POSTED

about 12 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Solicitation N0040623Q0619 is issued by the Department of Defense through NAVSUP Fleet Logistics Center Puget Sound for the procurement of ELBOW components to support SRF JAPAN. This is a firm-fixed-price supply contract categorized under NAICS code 332919 and is designated as a total small business set-aside. The acquisition is conducted in accordance with FAR parts 12 and 13, utilizing commercial and simplified acquisition procedures. Interested responsible sources must submit their proposals by June 9, 2023. The required delivery date for the supplies is 30 days after receipt of order, with shipping terms established as FOB Origin by Fact-SP to SRF JAPAN. Award decisions will generally be based on price, though the government may consider past performance. All communications and proposal submissions should be directed to the point of contact, Staci DeBriae, via email or MS Teams.

General Info

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Contract Value

$18,934.3

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

WA, USA

Set-Aside

SBA

Awardee

ROYAL MEDIA NETWORK, INC.

Award Issued Date

06/22/2023, 12:00:00 AM UTC

Documents

N0040623Q0619 - Solicitation for ELBOW (SRF JAPAN)

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMay 26

Presolicitation

Type ChangedMay 26

Presolicitation → Solicitation

AwardedJun 22

Contract was awarded

Submission Closed

06/09/2023, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5100, USA

Organization / AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

Office AddressBREMERTON, WA, 98314-5100, USA

Contacts

Staci DeBriae

contact@example.gov

Full Description

EMAIL QUESTIONS TO: contact@example.gov contact@example.gov COMPETITIVE. Fleet Logistics Center Puget Sound will be soliciting for ELBOW in accordance with solicitation specifications. This acquisition will be negotiated on a SMALL BUSINESS SET A SIDE. Interested persons may identify their interest and capability to respond to the requirement or submit proposals prior to offer due date. A determination to compete this action based upon responses received to this notice is solely within the discretion of the Government. Terms will be FOB: ORIGIN BY FACT-SP (NOLSC): to SRF JAPAN It is anticipated that the solicitation will be posted to the BetaSam website on or about 26 MAY 2023 with proposals due by 09 JUNE 2023. A Firm-Fixed Price, Supply type contract will be awarded in accordance with FAR parts 12 and 13, Commercial and Simplified Acquisition Procedures. The required delivery date is 30 DAYS ARO All responsible sources may submit a proposal which shall be considered by FLCPS. This solicitation and any subsequent amendments will be posted to the BetaSam website: https://www.beta.sam.gov. Prospective offerors are responsible for downloading their own copy of the solicitation from this website and for frequently monitoring that site for any amendments. The Government is not responsible for any inability of the offeror to access the posted documents. No telephone or fax requests will be accepted, and no hard-copy solicitation/amendment will be mailed or faxed. Emailed completed solicitations are acceptable. - Teleworking until further notice and will not have access to work phone or voicemail - Please communicate via email or call via - MS Teams during working hours until further notice PLEASE SEE ATTCHED SOLICITATION FOR REQUIREMENTS & SPECIFICATIONS, APPLICABLE CLAUSES & PROVISIONS, SHIPPING AND INVOICING INFORMATION. I am currently teleworking from home, best way to contact me is by email.