Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Energy was posted on December 22, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

473958 Request for Information (RFI) 200kV Workhorse Transmission Electron Microscope

Closed
473958Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANA
Solicitation # SPE2DH-27-T-0525
Solicitation SPE2DH-27-T-0525, issued by the DLA Troop Support Medical Supply Chain, seeks quotes for Draeger Carbon Dioxide 100/A-P measuring tubes (NSN 6630-12-189-3126). These round glass tubes with melted tips are designed to measure carbon dioxide content in compressed gases within a range of 100 to 3000 parts per million for 1 liter of air. The requirement consists of multiple line items totaling 11 packages, with each package containing 10 tubes. Delivery is required within 5 days after order to various destinations, including the USS Harvey C Barnum Jr, USS Warrior, and USS Arlington, with FOB, inspection, and acceptance all set at the destination. The items are subject to a non-extendable shelf life of 24 months, with a requirement that no more than 3 months elapse between the date of manufacture and delivery. Packaging must adhere to ASTM D3951 and RP001, while marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act. Quotes must be submitted via the DIBBS system, and the government may apply a HUBZone price evaluation preference. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 2 days
NAICS: 334516
New
International
Supply and Delivery of Two (2) Multi-Parameter Sondes
Solicitation # tender_22400
The Government of Ontario, through the Ministry of the Environment, Conservation and Parks, is soliciting bids for the supply and delivery of up to two multi-parameter sondes to support the Trailer for Surface Water Investigative Field Technology. These mobile monitoring platforms are used for high-frequency water quality and hydrology data collection, specifically measuring conductivity, temperature, turbidity, dissolved oxygen, and pH at locations such as river junctions and headwater wetlands. The contract requires the delivery of the first sonde by March 31, 2027, and the second by March 31, 2028. The procurement process utilizes a Best Score awarding strategy based on a two-stage evaluation. Stage 2 is a technical response evaluation worth 50 points, requiring a minimum threshold of 35 points to proceed, with additional points awarded for having an office or warehouse presence in Ontario. Stage 3 is a commercial evaluation worth 50 points based on the total submitted price. Bidders must meet mandatory specifications for conductivity, temperature, and turbidity sensors and must attest that they are not a U.S. business to avoid disqualification. Successful bidders will be required to provide proof of insurance, tax compliance, and adherence to the Occupational Health and Safety Act.
Environment, Conservation and Parks

POSTED

about 23 hours ago

DEADLINE

in 14 days
NAICS: 334516
New
Federal
X-Ray Computed Tomography Cabinet System (Revised Requirements)
Solicitation # N0042127Q1020
The Naval Air Warfare Center Aircraft Division (NAWCAD) is soliciting a turnkey, dual-tube X-ray Computed Tomography (CT) system for its facility in Patuxent River, Maryland. This unrestricted, full and open competition procurement is for a system featuring both a 225kV micro-focus and a 450kV high-resolution meso-focus X-ray tube, a CT-grade digital detector array, and a six-axis manipulator. The system must be housed in a shielded enclosure compliant with 21 CFR 1020.40 and be capable of scanning parts up to 60 inches in diameter and 84 inches in height. The award will be a single Firm-Fixed-Price purchase order covering the hardware and software, a phased training program, and a base year of preventative maintenance and warranty, with an option for a second year of maintenance. Award will be based on the Best Value to the Government, with Technical Capability weighted significantly more than Price. Technical evaluation focuses on hardware specifications, the software and analysis suite, and implementation and training. The contractor must complete delivery, installation, and radiation safety verification within 12 months of award, with off-site theory training completed by 18 months. Final acceptance is contingent upon a successful radiation safety survey and verification by a technical subject matter expert. Offerors must submit their quotes in two volumes, including detailed technical specifications and a firm-fixed-price quotation, via email to the designated contracting points of contact.
Naval Air Systems Command

POSTED

1 day ago

DEADLINE

in 20 days
NAICS: 334516
New
Federal
iWorx
Solicitation # W911S227U0166
Solicitation W911S227U0166 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of iWorx brand data recording systems or an equivalent product. This acquisition is a Total Small Business Set-Aside under NAICS code 334516. The required system must be a portable, USB-C powered data recorder with a minimum of 18 channels, expandable to 34, featuring 16 digital I/O channels, one audio output channel, and iWire compatibility. Key technical specifications include integrated pulse oximetry, spirometry, grip force, and intensity sensors, as well as pre-calibrated temperature, force, and blood pressure sensors. The system must also include two channels of wireless ECG/EMG, a 3-axis accelerometer, an integrated barometric pressure sensor, and a built-in isolated constant current high-voltage stimulator. The contract requires the delivery of new equipment only, with a preferred delivery timeline of 30 days on an F.O.B. destination basis. The award will be granted to the responsible offeror whose proposal is most advantageous based on price and technical compliance. The package includes an open site license for LabScribe software with lifetime updates and unlimited online training. Offerors must submit quotes via the PIEE Solicitation module and include a completed certification of country of origin to be considered responsive. The procurement is subject to various federal regulations, including the Buy American Act, security prohibitions on covered defense telecommunications equipment, and safeguarding of covered defense information.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 334516
New
Federal
Handheld Spectrometer
Solicitation # W912NW27QA003
The Department of Defense, through the W6QK Ccad Contr Office, is soliciting the procurement of two Vantage Max XRF Spectrometers, or an equivalent brand, for use in Depot Lab Analysis. This is a firm fixed price contract set aside for small businesses, with a delivery deadline of February 1, 2027, to a facility in Corpus Christi, Texas. The spectrometers must feature a Linux operating system, a rhodium anode X-ray tube, a silicon drift detector with a graphene window, and a WVGA LCD capacitive touch screen. Technical requirements include a 13-megapixel panorama camera, a minimum 14.4v removable lithium-ion battery, and compliance with Military Standard 810-G for a 4-foot drop test and an IP54 ingress protection rating. A standard three-year warranty is required, and optional accessories such as a field stand, holster, and carry case may be included. Award will be based on price, with a 10 percent price evaluation preference applied to successful offers from HUBZone small business concerns. The contract incorporates various FAR and DFARS clauses, including strict prohibitions on business operations with the Maduro regime and certain procurements from the Xinjiang Uyghur Autonomous Region. All deliveries are FOB Destination, with the contractor responsible for transportation costs. Invoicing and payment will be managed through the Wide Area WorkFlow (WAWF) system, requiring specific DoDAAC routing for payment, administration, and inspection.
W6QK Ccad Contr Office

POSTED

1 day ago

DEADLINE

in 7 days

General Info

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Upton, NY, 11973, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first4 pages · rfi
High

Read the document

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • MEASURING TUBE, GAS ANAOpen now, due in 3 days
  • MEASURING TUBE, GAS ANAOpen now, due in 7 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Brookhaven National Labor -Doe Contractor
Contacts1 person available
OfficeUpton, NY, 11973, USA

Full Description

Show more

Request for Information (RFI) 473958



This is a REQUEST FOR INFORMATION (RFI) NOTICE open to all companies that meet all the requirements/specifications of the attached RFI document for this requirement.  This RFI is solely for information and planning purposes for the effort described herein and is not to be construed as a commitment by the U.S. Government, nor will the U.S. Government pay for information solicited.  The information from this notice will help the Department of Energy (DOE) survey available resources.



PLEASE NOTE THAT THIS IS NOT A REQUEST FOR PROPOSAL, NO SOLICITATION EXISTS AT THIS TIME.  


Brookhaven Science Associates, LLC (herein known as “BSA”), operator of Brookhaven National Laboratory (BNL) under a Prime Contract with the U.S. Department of Energy (DOE) herewith requests your capabilities, as outlined in the attached RFI document for the subject requirement. The information being solicited includes, but is not limited to, the following:



a)  Indication of your interest in bidding on the services outlined in the attached RFI document.


b) A brief Statement of Capabilities detailing how your company meets the requirements outlined in the attached RFI document.


c) Answers to the questions stated in the attached RFI document.



Submittals must be received by BSA no later than 3:00 PM Eastern Time, on January 6, 2026.  Any information received after this time and date may not be considered.  



Electronic submissions will be accepted by the following method:



• Submissions must include the information noted above.  Emails shall be sent to Sign up to see this detail with “BSA RFI-473958” in the subject line.


 


We trust that the information contained herein is sufficient to permit your company to prepare a submittal outlining your capabilities, however, should you have any questions, please direct questions to the email address listed above.  All questions must be submitted via email.


More opportunities from Department Of Energy → Brookhaven National Labor -Doe Contractor

Same awarding agency

NAICS: 334515
New
Federal
Radio Detection Kit with Accessories - No Alternatives
Solicitation # JL484787
Brookhaven Science Associates (BSA), acting for Brookhaven National Laboratory, is soliciting quotations for a Firm Fixed Price purchase order to acquire a Radiodetection 8200SG Locator Kit and associated accessories. The required equipment includes the 8200SG Receiver with RTK GPS, a TX-10B Transmitter with ILOC, rechargeable battery kits, a 5-inch transmitter signal clamp, and an A-Frame and bag. Additionally, the scope includes a one-year license for Pointment Plus Utility Mapping Software and on-site training for eight students for four hours at the laboratory in Upton, New York. The proposal due date is November 23, 2026, and awards will be based on the lowest total evaluated price from a responsive and responsible offeror. Quotations must include the country of origin, Unique Entity Identifier, and any available published price lists, with pricing remaining valid for at least sixty days. Shipping requirements specify that items under 150 lbs may ship via the laboratory's FedEx account, while other shipments must be all-inclusive of freight, tariffs, and handling fees to be delivered FOB Destination. All deliverables must adhere to strict quality assurance standards, including ASTM Standard D 3951 for packaging, NIST-traceable calibration for test equipment, and compliance with OSHA's Globally Harmonized System. Electrical equipment must be certified by a Nationally Recognized Testing Laboratory, as the CE mark is not accepted.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
Federal
TopSil Wafers
Solicitation # AB485250
Brookhaven Science Associates (BSA), acting on behalf of Brookhaven National Laboratory and the Department of Energy, is soliciting quotations for the procurement of one HiRes Wafer (100 FZ 6 inch, two sides polished) under a Firm Fixed Price Purchase Order. The award will be granted to the responsive and responsible offeror providing the lowest total evaluated price that meets all technical requirements. Quotations must remain valid for at least 60 days and include the country of origin, Unique Entity Identifier (UEI), and a published price list if available. For items under 150 lbs, shipping may occur via the laboratory's FedEx account; otherwise, pricing must be all-inclusive of freight, tariffs, and handling, as separate line items for these costs will not be accepted. For foreign products over 150 lbs where all-inclusive pricing is unavailable, BNL will serve as the Importer of Record under DAP Incoterms. Technical specifications require the wafers to be delivered in cleanroom cassettes, with a strict prohibition on the merging of ingots. All shipments must comply with ASTM Standard D 3951 for commercial packaging, and any measuring and test equipment used must be traceable to NIST. The contract incorporates various FAR clauses, including standards for small business utilization, equal opportunity, and basic safeguarding of contractor information systems. Additionally, the supplier must adhere to BNL-QA-101 quality assurance requirements and ensure that any hazardous chemicals are accompanied by GHS Safety Data Sheets. All invoices must be submitted in PDF format to the designated fiscal division, referencing PO# 485250.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 335999
New
Federal
Prototype Stripline Kickers
Solicitation # MB483335
Brookhaven Science Associates, LLC, operating Brookhaven National Laboratory under the Department of Energy, is soliciting quotes for the design, fabrication, assembly, testing, and delivery of one prototype stripline kicker for the Electron Storage Ring at the Electron-Ion Collider. This Firm Fixed Price contract, under solicitation number MB483335, requires the contractor to provide engineering, project management, and quality assurance for a system including a kicker body, stripline electrodes, cooling features, and ultra-high vacuum feedthrough interfaces. Key deliverables include a brass half-stripline RF mockup for geometry and impedance verification, a detailed mechanical design incorporating brazed joints and cooling channels, and a final prototype that undergoes RF electrical characterization and vacuum certification. The period of performance is 18 months from the effective date. Offerors must submit their proposals via email to the Contract Specialist by December 4, 2026, at 5pm EST. Submissions must include the signed Quotation Pricing Sheet and a separate document detailing how the company meets the technical requirements. Award will be granted to the responsive and responsible contractor offering the lowest total price. Technical requirements emphasize compliance with UHV fabrication practices and BNL-QA-101 standards, with specific attention to thermal analysis and cooling strategies. All shipments must adhere to ASTM Standard D 3951-10 for commercial packaging and comply with the Buy American Act. Vendors must be registered in the System for Award Management or provide the required annual representations and certifications.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

4 days ago

DEADLINE

in 17 days
View Details
NAICS: 541380
New
Federal
Analytical Services
Solicitation # BSA478026-Solicitation
Brookhaven Science Associates (BSA) is soliciting analytical services to support environmental monitoring, sampling, and waste characterization at the Brookhaven National Laboratory (BNL) site in Upton, New York. The scope of work encompasses chemical, microbiological, and radiochemical analysis, divided into three distinct contract areas: a Limited Radiological Contract, a Limited Non-Radiological Contract, and a Full-Service Contract. To be considered technically acceptable, contractors must hold current New York State Department of Health (NYSDOH) Environmental Laboratory Approval Program (ELAP) certifications and national NELAP certification. Additionally, chemical laboratories must participate in NIST-approved Water Pollution and Water Supply studies, while those performing radionuclide analyses must participate in the DOE Mixed Analyte Performance Evaluation Program (MAPEP). The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria, with evaluation focusing on a fee schedule for various turnaround times (3, 7, 14, and 30 days). Performance requirements include maintaining an ISO 9001 certified quality system and adhering to strict data completeness and accuracy standards, such as the EPA's 90% data completeness criteria. Deliverables must be submitted as pipe-delimited ASCII text files via WinZip. The contract structure includes a base period and four option years, with payment terms of Net 10 days for small businesses and Net 30 days for large or foreign businesses. All shipments must comply with ASTM Standard D 3951 and include a Certificate of Conformance and detailed test reports.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 27 days
View Details
NAICS: 333248
New
Federal
Ultra-High Vacuum Suitcase
Solicitation # 485362
Brookhaven Science Associates, LLC, operator of Brookhaven National Laboratory, is soliciting quotes for one Ultra-High Vacuum Suitcase. This procurement seeks a commercially available product that meets the specific performance and technical requirements detailed in the solicitation's Statement of Work. The award will be granted to the responsive and responsible contractor offering the lowest total price. Offerors who cannot provide the exact manufacturer and item numbers specified must submit detailed specifications and test reports to prove equivalency. The anticipated delivery date is three months from the date of award, with shipping terms set as FOB Destination, Freight Prepaid for domestic orders and Delivered at Place for international shipments. The contract is subject to the Buy American Act and requires compliance with BNL-QA-101 Supplier Quality Assurance requirements, with a preference for suppliers registered to the ISO 9001 standard. All electrical equipment must be certified by a Nationally Recognized Testing Laboratory, as the CE mark is not accepted. Packaging must adhere to ASTM Standard D 3951, with strict prohibitions on the use of vermiculite unless certified asbestos-free and specific protections for electrostatic discharge sensitive items. Offerors must be registered in SAM.gov and provide all required representations and certifications, including business size status under NAICS code 333248.
All Other Industrial Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS