Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

48 -- Sleeve & Slide Assy

Active

Reference-Number-4810-00-348-6334Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Air Force has issued a notice establishing Qualification Requirements for the repair of sleeve and slide assemblies (PN 50745 and PN 50746) used in C-135 aircraft, identified by NSNs 4810-00-348-6334 and 4810-00-348-6335. This announcement clarifies that it is not a request for proposal and no solicitation document is currently available. Interested parties seeking the Qualification Requirements must submit written requests directly to the Small Business Office at Tinker Air Force Base via mail, fax, or email; telephone requests will not be accepted. This action serves as a sources-sought notice to identify qualified sources capable of performing repairs on these specific aircraft components. The document was posted on August 21, 2002, and it is intended to notify potential contractors of the requirements without initiating a formal procurement. The focus is on ensuring contractors meet established standards under FAR 9.2 and Public Law 98.525 before any solicitation or contract award can proceed.

General Info

Air Force seeks qualified sources for C-135 sleeve and slide assembly repairs; no solicitation yet.

Agency

N/A

NAICS

332710 - Machine Shops

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSources Sought

PostedAug 21

Sources Sought

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

In accordance with FAR 9.2 and Public Law 98.525 this synopsis constitutes notice that the Air Force has established Qualification Requirements (QRs) for the repair of the following: NSN 4810-00-348-6334, PN 50745, NOUN Sleeve & Slide Assy; NSN 4810-00-348-6335, PN 50746, NOUN Sleeve & Slide Assy applicable C-135 aircraft. This is not an RFP. No solicitation document exists. For copy of Qualification Requirements submit written requests only to The Small Business Office, OC-ALC/BC, 3001 Staff Drive, Ste 1AG85A, Tinker AFB, OK 73145-3009. FAX +1 (555) 000-0000. E-mail OCALC/contact@example.gov. No telephone requests. Only written or faxed requests received directly from the requestor are acceptable.

Similar Contracts

Same NAICS industry code

Space-Grade Prototyping & Fabrication

Department for Science, Innovation & Technology

POSTED

about 11 hours ago

DEADLINE

Precision Component Manufacturing (Conversion Kit)This subcontract for Precision Component Manufacturing involves the fabrication and supply of specialized conversion kits for prime contractors working on Dallas Area Rapid Transit projects. The scope of work requires the manufacture of components designed to transition equipment from M.A. to S.I. standards, strictly adhering to provided technical drawings and manufacturers' part numbers. To ensure all S.I. tolerances are met, the contractor must utilize precision CNC machining and rigorous quality control measurement tools. The final deliverable consists of completed and inspected conversion kits. This opportunity is associated with NAICS code 332710 and is managed through the Dallas Area Rapid Transit agency in Texas.

Dallas Area Rapid Transit

POSTED

DEADLINE

Precision Machining of Bar Assembly ComponentsThis subcontract involves the precision machining, turning, and milling of bar assembly blanks for prime contractors supporting DLA Aviation projects. The scope of work focuses on the production of Critical Application Item P/N 6659816, requiring the use of CNC milling and boring to machine high-strength alloys to strict tolerances. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710 for the Department of Defense. To qualify, providers must maintain SAE AS9003 or ISO 9001 quality systems and possess CMMC Level 2 certification to ensure the secure handling of controlled technical data. The solicitation was posted on October 30, 2026, with a response deadline of November 4, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Machined Components for Vehicular Installation KitsThis subcontract involves the manufacture of precision metal parts and hardware intended for vehicular installation kits supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the use of CNC machining, milling, turning, and drilling to produce components that strictly adhere to material specifications and military drawing tolerances as outlined in the TDP Rev B Gen 2 reference drawings. The project is managed under NAICS code 332710 for the Department of Defense. Interested parties must submit their responses by December 1, 2026, for performance located in the 17070-5002 zip code area. The final deliverable consists of finished machined metal components that meet all specified technical requirements for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

in about 1 month

Precision Component Machining for Roof Lifting JacksThis subcontract involves the precision machining of metal components for roof lifting jacks to support DLA Troop Support hardware projects under the Department of Defense. The scope of work requires the production of individual parts, including brackets, bases, and screws, specifically following drawings 81337 5-13-4605 through 5-13-4630. The contractor must utilize CNC milling and turning processes to ensure all components adhere to the strict dimensional tolerances outlined in the Technical Data Package. The final deliverable consists of machined component kits sufficient for 20 jack assemblies. This effort falls under NAICS code 332710 and is managed by the Subsistence FSE Supply Chain. Interested parties should note the response deadline of November 5, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Precision Machining and Finishing of Hose PlugsThis subcontract involves providing precision machining and finishing services for aluminum hose plugs to support the Department of Defense Fluid Handling Division. The scope of work includes post-casting machining, drilling, threading, and surface finishing to ensure all components meet Hydrasearch P/N A-PLG-7MS specifications. Operations must be conducted using CNC milling and turning centers, with quality assurance managed through CMM inspection in accordance with FAR 52.246-2 to deliver inspection-ready products. The project is designated as a Total Small Business Set-Aside under NAICS code 332710, with the place of performance located in San Diego, California. Interested parties must adhere to the timeline established by the posting date of October 30, 2026, with a response deadline of November 4, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

F/A-18EFG NLG Steering Collar Liner Application and MachiningThis subcontract involves the application of proprietary KAron resin-based coating with Teflon particles and the finish machining of liner profiles for F/A-18EFG NLG Steering Collars. Supporting projects for the Fleet Readiness Center Southwest, the contractor is responsible for machining steering collars according to Boeing and Kamatics drawings and delivering finished, certified components accompanied by Certificates of Compliance. The project is based in San Diego and falls under NAICS code 332710. To be eligible, the contractor must maintain CMMC Level 1 compliance and hold approved source status from both NAVAIR and Boeing.

Fleet Readiness Center

POSTED

DEADLINE

Upper Rudder Bearing Grease Seal Assembly ManufacturingThis subcontract involves the manufacturing of specialized Upper Rudder Bearing Grease Seal Assemblies for prime contractors supporting US Navy CVN 68 Class aircraft carrier projects. The work is managed by DLA Maritime - Puget Sound and will be performed in Bremerton, Washington. The manufacturer is responsible for producing components according to Drawing No. US73344-02 and DMS Part Number WLP001287-001, utilizing precision machining and molding processes. The contract requires the delivery of two seal assemblies accompanied by comprehensive inspection data packages and full supply chain traceability. Strict adherence to federal standards is mandatory, including MIL-STD-130 and MIL-STD-129 for unique identification and ASTM-D-3951 for packaging requirements. This procurement falls under NAICS code 332710.

DLA Maritime - Puget Sound

POSTED

DEADLINE

Level 1 Repair and Refurbishment of Ball Valve ComponentsThis subcontract involves the inspection, cleaning, and refurbishment of ball valve components for prime contractors supporting NAVSUP shipboard projects under the Department of Defense. The scope of work requires a complete teardown and technical wear evaluation, followed by full repairs using precision cleaning and lapping tools to restore components to an I like new or I A condition. All work must adhere to Level 1 Repair and Special Emphasis Material quality certifications to ensure the delivery of fully refurbished and certified valve components. The project falls under NAICS code 332710 and is managed by the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

UHV Manual Shutter Assembly ManufacturerThis subcontract opportunity is for the fabrication of manual shutter mechanisms intended for prime contractors working on projects at the Oak Ridge National Laboratory. The selected manufacturer will produce integrated shutter assemblies compatible with 4-1/2 inch UHV viewports, utilizing precision machining and vacuum-compatible materials such as Stainless Steel 304 and 316L to maintain strict vacuum integrity. Managed by the Department of Energy through Ornl Ut-Battelle Llc, the contract requires strict adherence to the Buy American Act and mandatory Export Control certification. Performance will take place in Oak Ridge, Tennessee, under NAICS code 332710. Interested parties must submit their responses by November 6, 2026.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Bangalore Torpedo M1A2 Tube and Sleeve FabricationThis subcontract involves the fabrication of non-explosive structural components for the Department of National Defence, specifically focusing on the M1A2 Bangalore Torpedo tube and sleeve assemblies. The scope of work includes the manufacture of tubes measuring 1.52 meters in length and 54 millimeters in diameter, along with connecting and nose sleeves. Technical requirements involve tapering, capping, and the machining of detonator well cavities for M1A4 Adapter Priming, with all components undergoing pressure testing between 5 and 15 psig. The successful contractor must be registered with the Controlled Goods Program and maintain ISO 9001:2015 certification to ensure quality and security standards. Deliverables consist of unfilled tube and sleeve assemblies, with performance taking place in Dundurn, Saskatchewan. The response deadline for this opportunity is December 1, 2026.

Department of National Defence

POSTED

DEADLINE

in about 1 month

Component Supplier for Towed Body AssemblyThis subcontract, managed by the Department of the Navy through the DLA Aviation office in Philadelphia, involves the supply of specialized metals, housings, and mechanical sub-components for Towed Body Assembly projects. The supplier is responsible for providing either raw materials or prefabricated sub-components specifically required for the construction of NSN 8145001656694. To ensure strict adherence to federal regulations, the contractor must provide comprehensive material certifications and mill test reports to verify compliance with the Buy American Act and the Trade Agreements Act. The performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 332710.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

31 -- Bushing, Sleeve

Solicitation # Reference-Number-3120-01-486-6678

POSTED

about 24 years ago

DEADLINE

16 -- Rudder Feel Trim Actuator

Solicitation # Reference-Number-1680-00-508-9183

POSTED

over 24 years ago

DEADLINE

30 -- Lever Remote Control

Solicitation # Reference-Number-3040-01-231-3609

POSTED

over 24 years ago

DEADLINE

53--CLAMPING SYSTEM

Solicitation # 1-011-RFW.1028

POSTED

over 24 years ago

DEADLINE

53 -- Bracket - Main Fuel Manifold, Assy of

Solicitation # Reference-Number-5340-01-360-7602

POSTED

over 24 years ago

DEADLINE

J -- Notice of intent to neogitiate a sole source contract

Solicitation # WASC-2-693

Department Of Commerce Noaa

POSTED

over 24 years ago

DEADLINE

L--ADVANCED ALTITUDE COMPENSATING NOZZLE MODEL FABRICATION

Solicitation # 8-1-1-T6-D6706

POSTED

over 24 years ago

DEADLINE

J -- Machining Services of Pumps

Solicitation # N00181-02-Q-0148

Navsup Flt Logistics Ctr Norfolk

POSTED

almost 25 years ago

DEADLINE

16--LCAC Propeller Duct Assemblies Machined Parts

Solicitation # N61331-02-R-0006

Naval Surface Warfare Center

POSTED

almost 25 years ago

CLOSED

almost 57 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS