Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STEM, FLUID VALVE

Active
SPE4A6-26-T-12APFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicits four STEM fluid valves with part numbers 4D09648-001 and 6512E62FN13 under NSN 4820-01-489-5542 for delivery to the Defense Logistics Agency distribution center in Tracy, California. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with inspection and sampling governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified. Attributes are classified with verification levels or AQLs, and unspecified attributes default to major. The valves must not contain intentionally added mercury or mercury compounds except for permitted uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, and any portable mercury-containing devices must include a secondary containment per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging requirements, and the unit of issue is each. Delivery is FOB origin with a required ship date of January 31, 2027, and a delivery window of 171 days from contract award. The quantity variance is strictly zero percent, and inspection and acceptance both occur at destination. All supplies must be free of government identification if non-accepted, per DFARS 252.211-7003(c)(1)(i), and item unique identification is not required. The contract is issued under solicitation SPE4A6-26-T-12AP with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Commodities Division.

General Info

Procure four fluid valve stems, NSN 4820014895542, two approved part numbers, delivery in 171 days, RFQ due August 12, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12AP.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Kameron Heningburg
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STEM,FLUID VALVE
STEM, FLUID VALVE.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
NORTHROP GRUMMAN SYSTEMS CORPORATION 90099 P/N 4D09648-001
NORTHROP GRUMMAN SYSTEMS CORPORATION 90099 P/N 6512E62FN13
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A6-26-T-12AP
SECTION B
PR: 7017739768 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017739768 0001 EA 4.000
NSN/MATERIAL:4820014895542
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:01/13/2027
SPE4A6-26-T-12AP
SECTION B
PR: 7017739768 PRLI: 0001 CONT’D
SPE4A6-26-T-12AP NSN/Part Number: 4820-01-489-5542 Quantity: 4 EA Purchase Request: 7017739768QTY: 4 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-166M
The contract specifies the procurement of one regulating fluid pressure valve with NSN 4820015070745 and part number 30804995 from Warren Controls, Inc., under solicitation SPE7MC-26-T-166M. Two identical line items are listed, each for one unit, with delivery required within 20 days FOB destination to two separate naval vessels—the USS New Orleans LPD 18 and the USS New York LPD 21—each with distinct shipping addresses and required delivery dates of July 30, 2026, and August 4, 2026, respectively. Quantity variance is strictly zero percent, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 requirements, and DLA’s Master List of Technical and Quality Requirements supersede any conflicting ASTM specifications. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted uses such as functional components in batteries, fluorescent lights, instruments, sensors, weapon systems, or chemically specified reagents, and any portable mercury-containing devices must have shock-proof design and secondary containment per NAVSEA 5100-003D. Vendor shipments must use traceable freight methods, prohibit parcel post, and utilize the VSM system for logistics. The unit of issue is each, with a unit price of one dollar, and all technical and quality mandates are governed by the DLA Master List in effect at the solicitation issue date. Government point of contact is Paula Mcclary, and the solicitation was published with a response deadline of August 17, 2026.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
VALVE
Solicitation # SPE7MC-26-T-166L
The contract involves the procurement of a valve with a brass body and stainless steel handle, 3/4 inch ports, pneumatically operated, under solicitation SPE7MC-26-T-166L from the Defense Logistics Agency. The item is identified by NSN 4820-01-602-4464 and part number 622V, with a requirement for three units to be delivered within 20 days FOB origin. Delivery must be made to the specified military address in Jacksonville, Florida, using the fastest traceable means, excluding parcel post. The valve must comply with all DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 packaging guidelines, including proper palletization and labeling. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and specific chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. The required delivery date is July 30, 2026, and the contract includes a zero tolerance variance in quantity. Full compliance with federal acquisition regulations and unit of issue standards is mandated, with all documentation referenced through official DLA sources.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-26-T-166W
The contract pertains to the procurement of one STEM fluid valve, identified by NSN 4820014770539 and part number V2C13313-4MF from VACCO INDUSTRIES 99517, with a single unit quantity and a total price of $1.00. Delivery is required within 20 days of contract award and must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged and marked strictly in accordance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, container types, and no special marking codes. The delivery is to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, and shipment must occur via the fastest traceable means, explicitly prohibiting parcel post. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the valve or its components, except for limited functional applications such as batteries, sensors, or instruments specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. All technical and quality requirements referenced are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling for this simplified acquisition. The solicitation number is SPE7MC-26-T-166W, posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 332912, and the primary point of contact is Paula Mcclary at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
VALVE, FLOW CONTROL
Solicitation # SPE7MC-26-T-167B
The contract specifies the procurement of six flow control valves with NSN 4820-01-596-5232 and part number AT324220, supplied by West Side Tractor Sales Co and John Deere Shared Services LLC, under solicitation SPE7MC-26-T-167B. Delivery is required within 20 days to Fort Polk, Louisiana, with FOB origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 requirements, and the use of ozone-depleting substances is strictly prohibited unless explicitly approved in writing by the contracting officer. Mercury and mercury-containing compounds are banned from direct contact with the product except in specified functional applications such as batteries, lighting, sensors, or weapon systems, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Shipping must be conducted via traceable methods, excluding parcel post, and all items must be properly marked and labeled per government specifications. The contract references the DLA Master List of Technical and Quality Requirements, which override any conflicting commercial standards, and only authorized unit of issue and packaging configurations are acceptable. The required delivery date is July 20, 2026, and the point of contact is Paula McClary at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-26-T-166T
The contract specifies the procurement of a single STEM fluid valve with NSN 4820-01-453-5407 and part number 12686001127, manufactured by Emerson Automation Solutions, under solicitation SPE7MC-26-T-166T. The item is classified as a critical application component and must comply with stringent DLA packaging and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Delivery is due within 20 days to FPO AP 96677, FOB destination, with zero variance allowed in quantity, and the required delivery date is July 30, 2026. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the valve, except as explicitly permitted for functional uses in batteries, instruments, or weapon systems per NAVSEA 5100-003D, with portable devices requiring shockproof construction and secondary containment. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The item must be shipped per DLA procedures C19 and C20, utilizing the unit of issue EA, with no tolerance for deviation in quantity. The point of contact is Paula McClary, and the item is designated for USS RUSHMORE LSD 47, with government-only tracking identifiers applied for inventory and distribution control.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-166G
The contract specifies the procurement of one regulating valve, NSN 4820-01-258-9404, under solicitation SPE7MC-26-T-166G, with a required delivery date of August 4, 2026, and a 20-day delivery window from origin point. All supplies must conform to DLA packaging and preservation standards, including MIL-STD-2073-1E for packaging and MIL-V-3 for preservation, with Level A preservation required if ZZ is the method. Packaging and marking must follow MIL-STD-129 and RP001, with no special marking code applied. The valve must not contain mercury or mercury-containing compounds except in specified exceptions such as functional use in batteries, instruments, or weapon systems, and any portable devices containing mercury must feature shockproof construction with a secondary containment barrier as per NAVSEA 5100-003D. Tooling for casting or forging may be required, and vendors are directed to submit a Casting and Forging Assistance Request if needed. The item is to be shipped FOB origin via fastest traceable means—parcel post is prohibited—and delivered to the designated military address: USS WASP LHD 1, FPO AE 09556. The contract enforces a strict 0% quantity variance and inspection and acceptance occur at destination. Preservation and packaging must align with the latest revision of applicable federal specifications, and all documentation must reference the DLA Master List of Technical and Quality Requirements. The point of contact for inquiries is Paula Mcclary, and the contract is managed by the Defense Logistics Agency under NAICS code 332912.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7M1-26-T-249M
The contract pertains to the procurement of a single regulating valve, identified by NSN 4820-01-468-9926 and part number 40494-301 from TRAC REGULATOR CO., INC., required under solicitation SPE7M1-26-T-249M. Delivery is due within five days of award, with FOB destination terms, and inspection and acceptance occur at the delivery point. The item is classified as a restricted source requiring government engineering approval, and strict compliance with DLA packaging standards MIL-STD-2073-1E and MIL-STD-129 is mandated, including specific packaging codes and unit container specifications. Mercury and mercury-containing compounds are prohibited unless exempted for specified functional applications such as batteries or precision instruments, with additional containment requirements for portable devices. Class I ozone-depleting chemicals are strictly forbidden in any component. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates. The shipment must be delivered to the FPO address in AP 96349, with the final destination as Commander, SRF-JRMC Yokosuka Naval Base in Japan, under RDD 999/NMCS shipment protocols. The original required delivery date is August 3, 2026, and no quantity variance is permitted.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE4A6-26-T-12HC
This contract, issued under solicitation SPE4A6-26-T-12HC by the Department of Defense’s ASC Commodities Division, specifies the procurement of two STEM, FLUID VALVE units identified by NSN 4820-01-516-7641 and part number 6D60813-001. The items are classified as critical application components and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Quality assurance protocols require sampling per MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stipulated; attributes are assigned verification levels or AQLs based on criticality, and unspecified attributes default to major. Mercury and mercury-containing compounds are strictly prohibited except in approved cases such as batteries, instruments, sensors, or chemical reagents as specified by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must include shockproof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The product must be packaged per MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking required, with palletization governed by DLA packaging requirements. Delivery is to be FOB origin to the DDSP New Cumberland facility in Pennsylvania, with an arrival date of 171 days from contract award and a firm delivery deadline of January 31, 2027. The original required delivery date is set for September 21, 2028, but this is superseded by the more immediate need. Quantity variance is strictly zero percent, and inspection and acceptance occur at destination. Unit of issue is each (EA), and the item does not require Unique Identification per customer request. Transportation and shipping are subject to DLAD Proc Notes C19 and C20, with primary contact information provided for contract inquiries.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332912
New
International
Material Handling Equipment
Solicitation # W8486-270875/A
The Department of National Defence is soliciting bids for the procurement of 30 distinct spare parts for Material Handling Equipment, with delivery required by December 31, 2026, to either 7 Canadian Forces Supply Depot in Edmonton, Alberta, or 25 Canadian Forces Supply Depot in Montreal, Quebec. Items range from alarm systems and filler caps to fuel injectors, servovalves, relays, and hydraulic components, each specified by GSIN, NSN, part number, and CAGE code, with exact quantities and delivery locations defined per item. The procurement follows a Lowest Price Technically Acceptable (LPTA) evaluation method, where technical compliance is a mandatory threshold and award is granted to the lowest-priced compliant offer on an item-by-item basis. All items must be new, conform to ISO 9001:2015 quality standards, and be delivered DDP (Delivered Duty Paid) under Incoterms 2020, with the contractor responsible for all transportation, duties, and import costs. Packaging and marking must adhere to specific Canadian Forces standards, including D-LM-008-036/SF-000 for most items, D-LM-008-026/SF-001 for seals, and D-LM-008-001/SF-001 for preservation-critical components, with all wood packaging required to meet ISPM 15 and carry the IPPC compliance mark. Each item must be individually marked with the manufacturer’s name and part number, and packaging must include a complete packing slip with contract and procurement numbers, along with a signed inspection voucher where applicable. Offerors must submit proposals electronically via email by September 8, 2026, to the designated address, with file size limited to 5 MB and no paper submissions accepted. Proposals must include certified declarations on ethics, anti-bribery, conflict of interest, and compliance with Canadian procurement codes; foreign contractors must affirm Canadian supplier status under reciprocal agreements. The Contracting Authority is Karen Benedikt, and while no security clearance is required, all invoice submissions constitute certification of contract compliance. Bidders may request a debriefing within 15 working days of award notification, and the Crown retains the right to negotiate with any supplier.
Department of National Defence

POSTED

about 15 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332912
New
DIBBS
STEM & Disk Assembly (3-inch V-Port Main Valve) Manufacturing and Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332912
New
DIBBS
Precision Valve Manufacturing and AssemblyThe contract requires the precision manufacture and final assembly of a regulating valve specifically designed for gaseous oxygen service, with strict adherence to MIL-STD-1330 for cleaning procedures and MIL-STD-2073-1E for packaging standards to ensure safety and compatibility in high-oxygen environments. All work must be performed in compliance with rigorous military specifications to guarantee the valve's reliability, purity, and performance under critical operational conditions. The project is classified as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses as defined by the SBA are eligible to respond, with the NAICS code 332912 confirming the focus on other fabricated metal product manufacturing. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the Department of Defense, specifically the DDSP New Cumberland Facility, which oversees defense-related manufacturing and logistics. The contract is accessible through the DIBBS system under the reference number SPE7MC26T164V, and while no point of contact is provided, interested small businesses must submit proposals prior to the deadline to be considered for award, emphasizing the importance of timely and fully compliant submissions.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
High-Pressure Fluid Regulating Valve Supply
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)
Fabricated Structural Metal Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and Assessment Support
Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation Management
Administrative Management and General Management Consulting Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Production Lot Testing (PLT) Services
Testing Laboratories and Services

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-11RF
This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12FD
The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details