This Solicitation opportunity from Department Of Defense was posted on November 12, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

48--VALVE ASSEMBLY,MANI

Closed

N0038325QB040Federal

Submission Closed12/09/2024, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M3-27-T-0769

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one quick coupling half, identified by NSN 4730-01-579-8245. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 31, 2024. The item is to be delivered FOB Origin to the Armament Inspectorate in Warszawa, Poland. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically prohibiting the use of additive manufacturing unless authorized and restricting the intentional addition of mercury or mercury-containing compounds. Compliance requirements are extensive, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance are both set at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation is open to full and open competition, with specific price evaluation preferences noted for HUBZone small business concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010424QBM87

This solicitation, number N00104-24-Q-BM87, is issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, PA, for the procurement of one Valve Stem, TTV (NIIN: 016320195). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and risk assessments from the Supplier Performance Risk System. The procurement is a DO rated order for national defense and emergency preparedness, and it requires adherence to the Buy American and Balance of Payments Program. The contractor must comply with strict technical and quality standards, including the Individual Repair Part Ordering Data (IRPOD) and higher-level quality requirements under MIL-I-45208. Packaging must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification per MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. The response deadline for quotes is November 30, 2026, and submissions are accepted via email or NECO.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QFE70

This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

47--CONNECTION,FLEXIBLE

Solicitation # N0010426QYAGN

Solicitation NO0014-26-Q-YAGN is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of flexible connections, specifically NSN 4730-01-144-5975. The required items must adhere to the design represented by Cage Code 18444, reference number 299941-100, and must be entirely mercury-free for use on submarines and surface ships. The government retains an option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt. The closing date for this solicitation has been amended to October 19, 2026. The contract mandates strict quality and technical standards, including physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073. All deliveries are FOB Destination with a delivery window of 180 days. Offerors who are not the Original Equipment Manufacturer must provide the OEM's company name, CAGE code, and a signed letter of authorization. Evaluation will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risk, alongside Buy American and Balance of Payments Program policies. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE98

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates strict quality assurance, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane, both requiring rigorous quantitative chemical and mechanical analysis. Key technical requirements include hydrostatic testing for each ball at 1875 PSI for 30 minutes, with dye penetrant inspection as an acceptable substitute for manufacturers lacking test fixtures. All welding and brazing must adhere to specific S9074 and 0900-LP standards, requiring prior approval of qualification data. The contractor must submit a Certificate of Compliance and all objective quality evidence via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard for review and acceptance before shipping. Final inspection follows a zero-defect acceptance policy, with sampling based on ANSI/ASQ-Z1.4. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. Packaging must comply with MIL-STD-2073-1, and all shipments must be prepaid to the destination. Offerors must provide a Quality Assurance Manual to be eligible for award and must certify that the materials are mercury-free. All configuration changes or deviations require formal review and approval by the Contracting Officer through Engineering Change Proposals or waiver requests.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM127QKA47

Solicitation SPRMM1-27-Q-KA47 is issued by the Defense Logistics Agency Weapons Support Mechanicsburg for the manufacture and delivery of one DELTA-P IND ASSY, identified by NIIN 016642911. The item must be produced according to the design represented by Cage Code 99517, reference number 12052305-005. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations based on LPTA criteria and risk assessments from the Supplier Performance Risk System. The procurement is categorized under NAICS code 332919 with a small business size standard of 750 employees. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and a mandatory mercury-free certification for use on submarines and surface ships. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific DLR labeling requirements for shipping containers. Inspection and acceptance will occur at the contractor's or subcontractor's plant. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors must provide CMMC Level 1 self-certification and identify the Original Equipment Manufacturer and CAGE code if they are not the manufacturer. Delivery is destined for the Pearl Harbor Naval Shipyard IMF.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010426QZB64

Solicitation N00104-26-Q-ZB64 is a fixed-price request for quotations from NAVSUP Weapon Systems Support for the manufacture of a Fluid Valve Stem (NSN 4820-01-496-3210). This item is designated as a Critical Safety Item and Special Emphasis Material Level I, as its failure could result in catastrophic loss of life or the ship. The government will provide the necessary barstock (NIIN 014959538X2) as Government Furnished Material, and the contractor must maintain strict heat traceability throughout production. The stem must be manufactured in accordance with NAVSEA drawing 803-5959307 and related specifications, using ASTM-B348 Grade 23 or SAE-AMS-4931 material. Weld repairs on titanium parts are strictly prohibited. The contract mandates rigorous quality assurance and certification standards, requiring a quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. Key requirements include dye penetrant inspection, a zero-defect lot acceptance policy, and the submission of a comprehensive Certificate of Compliance and test results via the Wide Area Workflow system prior to shipment. All deliverables must be preserved and marked according to MIL-STD-2073 and MIL-STD-129. Award will be made to the most advantageous offeror, with past performance weighted as more important than price.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

48--ACTUATOR,HYDRAULIC-, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QZA04

This fixed-price contract, solicitation number N00104-27-Q-ZA04, is issued by the Navsup Weapon Systems Support Mech for the manufacture or refurbishment of hydraulic actuators. The scope of work requires the contractor to inspect, clean, and refurbish the items in accordance with Drawing 30093-40940 and MS NO. 5640-081-346 REV A CHG-4. Final delivery of the material must be completed within 86 days of the contract's effective date, with the ship-to destination located in Kittery, Maine. The award is designated as a DO rated order under the Defense Priorities and Allocations System, signifying its importance for national defense. Key requirements include physical identification per MIL-STD-130 and strict adherence to preservation, packaging, and marking standards such as MIL-STD-2073-1 and MIL-STD-129. If additive manufacturing is utilized, the contractor must provide comprehensive traceability data via DD1423 reporting. The contract includes a one-year warranty for supplies of a noncomplex nature and mandates the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Evaluation for award is based on the Supplier Performance Risk System, assessing item, price, and supplier risk. All transportation to and from the repair site is paid for by the US Navy.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE90

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Valve Stem (NSN 1HM 4820-01-548-5698) to be delivered within 120 days. The item is designated as Special Emphasis material (Level I, Scope of Certification) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this criticality, the contract mandates strict quality controls, including a requirement for the contractor to maintain an ISO-9001 quality system and undergo Government Quality Assurance at source via the Defense Contract Management Agency. Technical requirements specify the use of ASTM-B150 Alloy C63200, mandatory oxygen cleaning per MIL-STD-1330, and a strict mercury-free composition. The award will be made to the offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Key deliverables include the hardware and comprehensive test certifications submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards, with specific red labeling for Level 1 materials. The procurement is DO certified for national defense under the Defense Priorities and Allocations System and is conducted as a simplified acquisition.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QFA13

This contract, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a solicitation for the manufacture or refurbishment of two cartridge valves (NSN 4820-01-646-8015) in accordance with drawing 237914-0002. The award will be made to a single offeror based on a trade-off where past performance is considered more important than price. The contract is designated as a DO-rated order for national defense use and is issued under Emergency Acquisition Flexibilities. Final delivery of the material is required within 365 days of the contract's effective date, with FOB Destination terms. Key technical requirements include strict adherence to MIL-STD-130 for marking, MIL-STD-2073 for packaging, and MIL-STD-1330 for oxygen cleaning. The contractor must provide a one-year warranty from the date of delivery and submit certification data CDRLs at least 20 days prior to scheduled delivery. If additive manufacturing is utilized, a Master Component Traceability Ledger must be maintained and submitted. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and reporting, and compliance with Buy American and Balance of Payments program certifications. Inspection and acceptance will occur at the origin.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM127QKA27

This fixed-price solicitation, issued by DLA Mechanicsburg under solicitation number SPRMM127QKA27, requires the manufacture and delivery of two regulating valves (VALVE,REGULATING,FL) based on the design represented by Cage Code 99643, reference number 84140-1. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Offerors must be authorized distributors of the original manufacturer and are prohibited from providing refurbished material. Technical drawings are not available for this item, and the contractor is responsible for ensuring the product meets all quality requirements, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073-1. The contract mandates the use of PIEE-WAWF for the electronic submission of invoices and receiving reports, and any requests for modifications must be processed through the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin. Key compliance requirements include CMMC Level 1 self-certification, adherence to the Buy American Act, and strict prohibitions relating to Chinese military companies. Contractors must maintain inspection records for 365 days following final delivery and are required to provide the Original Equipment Manufacturer's CAGE code and part number when submitting quotes.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

NOZZLE,VALVE — 4820017141239 — SPRPA127QXA57

Solicitation # SPRPA127QXA57

Solicitation SPRPA127QXA57, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks a single award for the supply of nine valve nozzles (NSN 4820-01-714-1239). This procurement is designated as a Critical Safety Item (CSI) and requires the contractor to maintain an ISO9001 quality management system. Delivery is required within 90 days to DLA Distribution Cherry Point, North Carolina, with FOB Destination terms. Inspection and acceptance will occur at the origin. The award will be based on the most advantageous offer, with past performance weighted as more important than price. The government will utilize the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Strict packaging and marking standards are mandated, including compliance with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and electrostatic discharge protection where applicable. Payment will be processed electronically via Wide Area WorkFlow (WAWF). The solicitation incorporates various FAR and DFARS clauses, including the Buy American program and cybersecurity requirements under DFARS 252.204-7012.

Pa DLA Aviation At Philadelphia

POSTED

about 15 hours ago

DEADLINE

in 18 days

AI Contract Overview

The Department of Defense, through NAVSUP Weapon Systems Support in Philadelphia, is seeking to procure two units of a valve assembly (NSN 7R-4810-016062525, P/N 71784) on a sole source basis from Eaton, the original equipment manufacturer. This procurement is based on the fact that Eaton holds the exclusive rights and data necessary for manufacturing this item, with no available drawings or data for other sources. The government anticipates awarding the contract to Eaton without competition, although other capable firms may submit capability statements or proposals within the specified timeframe for consideration. The procurement will be conducted under FAR Part 13 procedures, and the solicitation will be posted electronically via NECO, with no hard copies or telephone requests accepted. The anticipated award date is March 2025, and interested parties are encouraged to submit their qualifications via email to the designated contracting officer. This effort is not set aside for small businesses, and the government will evaluate all submissions received within 45 days of the notice to determine whether a competitive process is warranted.

General Info

DoD's NAVSUP seeks FMS Valve Assembly spares; responses due by December 9, 2024.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

Set-Aside

NONE

Documents

RFQ N00383-25-Q-B040 - Valve Assembly

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedOct 24

Presolicitation

Type ChangedNov 12

Presolicitation → Solicitation

Notice updatedNov 12

The notice description changed.

Response DeadlineDec 9

Deadline has passed

Submission Closed

12/09/2024, 08:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressPHILADELPHIA, PA, 19111-5098, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

CONTACT INFORMATION|4|N733.10|P8|+1 (555) 000-0000|contact@example.gov| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8||||||||| FMS DELIVERY AND SHIPPING INSTRUCTIONS|3|||x| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|invoice and receiving report combo|source|tbd|n00383|tbd|tbd|see schedule|tbd||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| EQUAL OPPORTUNITY (SEP 2016)|2||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| LIMITATIONS ON PASS-THROUGH CHARGES (JUN 2020)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1|| ROYALTY INFORMATION (APR 1984)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2024)|12|332919|750||||||||||| FACSIMILE PROPOSALS (OCT 1997)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||A1A| This RFQ is for a FMS Spares buy. The Small Business Administration representative at NAVSUP WSS has reviewed this requirement and determined that a set-aside recommendation was not applicable for this procurement. The Small Business Administration representative at NAVSUP WSS has reviewed this requirement and determined that a set-aside recommendation was not applicable for this procurement. Quotes may be emailed to the below email address and must be received on or before on the closing date listed on page 1 of the solicitation. contact@example.gov. This contract/delivery order/purchase order/modification is issued by the Government when deposited in the mail, transmitted by facsimile or sent by any electronic commerce method, including email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification. \