This Solicitation opportunity from Department Of Defense was posted on July 5, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

48--VALVE,BALL

Awarded

N0010423QFC12Federal

Submission Closed05/03/2023, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A7-26-Q-0400

Solicitation SPE4A7-26-Q-0400 is a small business set-aside request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Division for the procurement of five units of Filter, Coupler, identified by NSN 5865-01-227-0352. The required materials must be new and unused, with a delivery schedule of 327 days after order. Inspection and acceptance are both designated at the origin. The government will determine the best value based on a comparative assessment of price and non-price factors, with past performance, specifically SPRS assessments and historical quality and delivery compliance, weighted more heavily than quoted delivery. This procurement involves significant security and regulatory requirements, including the handling of export-controlled technical data subject to ITAR or EAR and the use of a classified drawing that will be provided upon award following the receipt of a completed DD Form 254. Contractors must comply with DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling, while packaging must adhere to ASTM D3951. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. Proposals must be submitted via the DLA Internet Bid Board System by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0769

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one quick coupling half, identified by NSN 4730-01-579-8245. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 31, 2024. The item is to be delivered FOB Origin to the Armament Inspectorate in Warszawa, Poland. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically prohibiting the use of additive manufacturing unless authorized and restricting the intentional addition of mercury or mercury-containing compounds. Compliance requirements are extensive, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance are both set at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation is open to full and open competition, with specific price evaluation preferences noted for HUBZone small business concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010424QBM87

This solicitation, number N00104-24-Q-BM87, is issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, PA, for the procurement of one Valve Stem, TTV (NIIN: 016320195). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and risk assessments from the Supplier Performance Risk System. The procurement is a DO rated order for national defense and emergency preparedness, and it requires adherence to the Buy American and Balance of Payments Program. The contractor must comply with strict technical and quality standards, including the Individual Repair Part Ordering Data (IRPOD) and higher-level quality requirements under MIL-I-45208. Packaging must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification per MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. The response deadline for quotes is November 30, 2026, and submissions are accepted via email or NECO.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QFE70

This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

47--CONNECTION,FLEXIBLE

Solicitation # N0010426QYAGN

Solicitation NO0014-26-Q-YAGN is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of flexible connections, specifically NSN 4730-01-144-5975. The required items must adhere to the design represented by Cage Code 18444, reference number 299941-100, and must be entirely mercury-free for use on submarines and surface ships. The government retains an option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt. The closing date for this solicitation has been amended to October 19, 2026. The contract mandates strict quality and technical standards, including physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073. All deliveries are FOB Destination with a delivery window of 180 days. Offerors who are not the Original Equipment Manufacturer must provide the OEM's company name, CAGE code, and a signed letter of authorization. Evaluation will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risk, alongside Buy American and Balance of Payments Program policies. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE98

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates strict quality assurance, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane, both requiring rigorous quantitative chemical and mechanical analysis. Key technical requirements include hydrostatic testing for each ball at 1875 PSI for 30 minutes, with dye penetrant inspection as an acceptable substitute for manufacturers lacking test fixtures. All welding and brazing must adhere to specific S9074 and 0900-LP standards, requiring prior approval of qualification data. The contractor must submit a Certificate of Compliance and all objective quality evidence via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard for review and acceptance before shipping. Final inspection follows a zero-defect acceptance policy, with sampling based on ANSI/ASQ-Z1.4. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. Packaging must comply with MIL-STD-2073-1, and all shipments must be prepaid to the destination. Offerors must provide a Quality Assurance Manual to be eligible for award and must certify that the materials are mercury-free. All configuration changes or deviations require formal review and approval by the Contracting Officer through Engineering Change Proposals or waiver requests.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM127QKA47

Solicitation SPRMM1-27-Q-KA47 is issued by the Defense Logistics Agency Weapons Support Mechanicsburg for the manufacture and delivery of one DELTA-P IND ASSY, identified by NIIN 016642911. The item must be produced according to the design represented by Cage Code 99517, reference number 12052305-005. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations based on LPTA criteria and risk assessments from the Supplier Performance Risk System. The procurement is categorized under NAICS code 332919 with a small business size standard of 750 employees. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and a mandatory mercury-free certification for use on submarines and surface ships. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific DLR labeling requirements for shipping containers. Inspection and acceptance will occur at the contractor's or subcontractor's plant. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors must provide CMMC Level 1 self-certification and identify the Original Equipment Manufacturer and CAGE code if they are not the manufacturer. Delivery is destined for the Pearl Harbor Naval Shipyard IMF.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010426QZB64

Solicitation N00104-26-Q-ZB64 is a fixed-price request for quotations from NAVSUP Weapon Systems Support for the manufacture of a Fluid Valve Stem (NSN 4820-01-496-3210). This item is designated as a Critical Safety Item and Special Emphasis Material Level I, as its failure could result in catastrophic loss of life or the ship. The government will provide the necessary barstock (NIIN 014959538X2) as Government Furnished Material, and the contractor must maintain strict heat traceability throughout production. The stem must be manufactured in accordance with NAVSEA drawing 803-5959307 and related specifications, using ASTM-B348 Grade 23 or SAE-AMS-4931 material. Weld repairs on titanium parts are strictly prohibited. The contract mandates rigorous quality assurance and certification standards, requiring a quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. Key requirements include dye penetrant inspection, a zero-defect lot acceptance policy, and the submission of a comprehensive Certificate of Compliance and test results via the Wide Area Workflow system prior to shipment. All deliverables must be preserved and marked according to MIL-STD-2073 and MIL-STD-129. Award will be made to the most advantageous offeror, with past performance weighted as more important than price.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

48--ACTUATOR,HYDRAULIC-, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QZA04

This fixed-price contract, solicitation number N00104-27-Q-ZA04, is issued by the Navsup Weapon Systems Support Mech for the manufacture or refurbishment of hydraulic actuators. The scope of work requires the contractor to inspect, clean, and refurbish the items in accordance with Drawing 30093-40940 and MS NO. 5640-081-346 REV A CHG-4. Final delivery of the material must be completed within 86 days of the contract's effective date, with the ship-to destination located in Kittery, Maine. The award is designated as a DO rated order under the Defense Priorities and Allocations System, signifying its importance for national defense. Key requirements include physical identification per MIL-STD-130 and strict adherence to preservation, packaging, and marking standards such as MIL-STD-2073-1 and MIL-STD-129. If additive manufacturing is utilized, the contractor must provide comprehensive traceability data via DD1423 reporting. The contract includes a one-year warranty for supplies of a noncomplex nature and mandates the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Evaluation for award is based on the Supplier Performance Risk System, assessing item, price, and supplier risk. All transportation to and from the repair site is paid for by the US Navy.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE90

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Valve Stem (NSN 1HM 4820-01-548-5698) to be delivered within 120 days. The item is designated as Special Emphasis material (Level I, Scope of Certification) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this criticality, the contract mandates strict quality controls, including a requirement for the contractor to maintain an ISO-9001 quality system and undergo Government Quality Assurance at source via the Defense Contract Management Agency. Technical requirements specify the use of ASTM-B150 Alloy C63200, mandatory oxygen cleaning per MIL-STD-1330, and a strict mercury-free composition. The award will be made to the offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Key deliverables include the hardware and comprehensive test certifications submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards, with specific red labeling for Level 1 materials. The procurement is DO certified for national defense under the Defense Priorities and Allocations System and is conducted as a simplified acquisition.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QFA13

This contract, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a solicitation for the manufacture or refurbishment of two cartridge valves (NSN 4820-01-646-8015) in accordance with drawing 237914-0002. The award will be made to a single offeror based on a trade-off where past performance is considered more important than price. The contract is designated as a DO-rated order for national defense use and is issued under Emergency Acquisition Flexibilities. Final delivery of the material is required within 365 days of the contract's effective date, with FOB Destination terms. Key technical requirements include strict adherence to MIL-STD-130 for marking, MIL-STD-2073 for packaging, and MIL-STD-1330 for oxygen cleaning. The contractor must provide a one-year warranty from the date of delivery and submit certification data CDRLs at least 20 days prior to scheduled delivery. If additive manufacturing is utilized, a Master Component Traceability Ledger must be maintained and submitted. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and reporting, and compliance with Buy American and Balance of Payments program certifications. Inspection and acceptance will occur at the origin.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM127QKA27

This fixed-price solicitation, issued by DLA Mechanicsburg under solicitation number SPRMM127QKA27, requires the manufacture and delivery of two regulating valves (VALVE,REGULATING,FL) based on the design represented by Cage Code 99643, reference number 84140-1. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Offerors must be authorized distributors of the original manufacturer and are prohibited from providing refurbished material. Technical drawings are not available for this item, and the contractor is responsible for ensuring the product meets all quality requirements, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073-1. The contract mandates the use of PIEE-WAWF for the electronic submission of invoices and receiving reports, and any requests for modifications must be processed through the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin. Key compliance requirements include CMMC Level 1 self-certification, adherence to the Buy American Act, and strict prohibitions relating to Chinese military companies. Contractors must maintain inspection records for 365 days following final delivery and are required to provide the Original Equipment Manufacturer's CAGE code and part number when submitting quotes.

SPRMM1 DLA Mechanicsburg

POSTED

about 9 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

Contract Value

$223,086

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

Set-Aside

NONE

Awardee

FLUIDYNE CORPORATION

Award Issued Date

06/23/2023, 12:00:00 AM UTC

Documents

N0010423QFC12.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates

PhaseAwarded

PostedApr 4

Presolicitation

Type ChangedApr 5

Presolicitation → Solicitation

Notice updatedApr 5

The notice description changed.

Notice updatedApr 13

NAICS code changed from 333998 to 332919.

Notice updatedApr 13

The notice description changed.

Notice updatedJul 5

Notice details unchanged. Attachments may have changed.

Notice updatedJul 5

The notice description changed.

AwardedJun 23

Contract was awarded

Submission Closed

05/03/2023, 08:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

CONTACT INFORMATION|4|N743.45|WVN|+1 (555) 000-0000|contact@example.gov| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NAVICP REVIEW FEB 1991)(FEB 1999)|1|See specification sections C and E| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8|x||x|||||| TIME OF DELIVERY (JUNE 1997)|20|0001|2|730 days|||||||||||||||||| GENERAL INFORMATION-FOB-DESTINATION|1|B| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Stand-Alone Receiving Report - Certifications Combo-Receiving Report & Invoice - Material|n/a|tbd|N00104|tbd|N39040 - Certifications, S4306A - Material|N50286|tbd|133.2|n/a|n/a|S4306A - Material|n/a|n/a|See DD1 423|contact@example.gov| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| EQUAL OPPORTUNITY (SEP 2016)|2||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|one year from date of delivery|one year from date of delivery||||| WARRANTY OF DATA--BASIC (MAR 2014)|2||| BUY AMERICAN --FREE TRADE AGREEMENTS--BALANCE OF PAYMENTS PROGRAM - BASIC (JAN2023))|3|||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (NOV 2020)|13|||||||||||||| SMALL BUSINESS PROGRAM REPRESENTATIONS (DEVIATION 2023-O0002) (DEC 2022)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (DEC 2022))|3|||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (NOV 2014)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2023)|13|332919|750|||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||x| 1. Data Item A001 (inspection and Test Plan) may be waived if already on fileat NAVSUP WSS Mech. 2. Drawings associated with this solicitation will be made available on the SAM.gov website but will be restricted access, which needs to be approved. Once access has been requested, interested vendors should email the POC listed on the solicitation to inform them of the request. 3. NAVSUP WSS Mech will be considering past performance in the evaluation ofoffers. See Clause 252.213-7000. 4. All contractual documents (i.e. contracts, purchase orders, task orders,delivery orders, and modifications) related to the instant procurement areconsidered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commercemethods, such as email. The Government's acceptance of the contractor'sproposal constitutes bilateral agreement to "issue" contractual documents asdetailed here in. 5. The following proposed delivery schedule applies: Submission of all certification data CDRLS 20 days prior to delivery. PNSY review/acceptance of certification CDRLS 6 working days after receipt Final delivery of material (730 days) Early and incremental delivery is acceptable at no additional cost to the Government. 6. This requirement requires access to NOFORN and/or Naval Nuclear PropulsionInformation. See local text WSSTERMHZ12 for further information. If you wish toobtain a copy of the drawings, please download the security agreement form fromSAM.gov and email the completed, signed form to contact@example.gov. 7. This requirement requires access to confidential drawings. These drawings are not required to provide a quotation for the RFQ/RFP. However, in the event of an award, a facility security clearance is required. 8. This procurement is issued pursuant to Emergency Acquisition Flexibilities (EAF). \ 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Identification of Classified Documents - This contract/purchase order requires the Contractor to have authorized access to classified documents in accordance with the attached Contract Security Classification Specification (DD Form 254). The classified documents and security level are: ;830-6404016 - CONFIDENTIAL; 2.3 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.3.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.3.2 Specification Revisions - The specification revisions listed under "Documents References" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. 2.3.3 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made. DRAWING DATA=117895 |53711| -|1N |D|0001 | |49998|0171507 DRAWING DATA=5959311 |53711| C| |D|0001 | C|00026|0000000 DRAWING DATA=5959311C5 |53711| A|ER |D|0001 | A|49998|0674623 DRAWING DATA=6404016 |53711| B| |F|0001 | B|00026|0000000 DRAWING DATA=6404977 |53711| E| |D|0001 | E|49998|0650643 DRAWING DATA=6404977 |53711| E| |D|0001.A | E|49998|0562795 DRAWING DATA=6404977 |53711| E| |D|0001.B | E|49998|0405370 DRAWING DATA=6404977 |53711| E| |D|0001.C | E|49998|0201297 DRAWING DATA=6404977 |53711| E| |D|0002 | E|49998|0301358 DRAWING DATA=6404977 |53711| E| |D|0002.A | E|49998|0312341 DRAWING DATA=6404977 |53711| E| |D|0002.B | E|49998|0276176 DRAWING DATA=6404977 |53711| E| |D|0002.C | B|49998|0243750 DRAWING DATA=6404977 |53711| E| |D|0002.D | B|49998|0103996 DRAWING DATA=6404977 |53711| E| |D|0002.E | B|49998|0220952 DRAWING DATA=6404977 |53711| E| |D|0002.F | B|49998|0226589 DRAWING DATA=6404977 |53711| E| |D|0002.G | B|49998|0144264 DRAWING DATA=6404977 |53711| E| |D|0003 | D|49998|0152804 DRAWING DATA=6404977 |53711| E| |D|0003.A | D|49998|0156901 DRAWING DATA=6404977 |53711| E| |D|0003.B | D|49998|0155404 DRAWING DATA=6404977 |53711| E| |D|0003.C | E|49998|0255834 DRAWING DATA=6404977 |53711| E| |D|0003.D | D|49998|0155065 DRAWING DATA=6404977 |53711| E| |D|0003.E | D|49998|0151245 DRAWING DATA=6404977 |53711| E| |D|0003.F | D|49998|0148075 DRAWING DATA=6404977 |53711| E| |D|0003.G | D|49998|0139768 DRAWING DATA=6404977 |53711| E| |D|0003.H | E|49998|0300546 DRAWING DATA=6404977 |53711| E| |D|0004 | E|49998|0288690 DRAWING DATA=6404977 |53711| E| |D|0004.A | E|49998|0258215 DRAWING DATA=6404977 |53711| E| |D|0004.B | E|49998|0273111 DRAWING DATA=6404977 |53711| E| |D|0005 | B|49998|0118691 DRAWING DATA=6404977 |53711| E| |D|0006 | B|49998|0117564 DRAWING DATA=6404977 |53711| E| |D|0007 | B|49998|0175962 DRAWING DATA=6404977 |53711| E| |D|0007.A | E|49998|0231215 DRAWING DATA=6404977 |53711| E| |D|0008 | E|49998|0233359 DRAWING DATA=6404977 |53711| E| |D|0009 | D|49998|0164135 DRAWING DATA=6404977 |53711| E| |D|0010 | D|49998|0096583 DRAWING DATA=6726204 |53711| B| |D|0001 | B|49998|0367197 DOCUMENT REF DATA=FED-STD-H28 | | |B |190424|A| | | DOCUMENT REF DATA=FED-STD-H28 |0020| |B |941221|A| |01| DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=ASTM-B139 | | | |121001|A| | | DOCUMENT REF DATA=QQ-N-281 | | |D |851023|A| 2| | DOCUMENT REF DATA=QQ-N-286 | | |G |001207|A| | | DOCUMENT REF DATA=ASTM-B367 | | | |220401|A| | | DOCUMENT REF DATA=ASTM-B369 | | | |200401|A| | | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=MIL-DTL-1222 | | |J |001208|A| | | DOCUMENT REF DATA=ASTM-E1417 | | | |160615|A| | | DOCUMENT REF DATA=ASTM-E1444 | | | |160601|A| | | DOCUMENT REF DATA=MIL-STD-2035 | | |A |950515|A| | | DOCUMENT REF DATA=MIL-STD-2132 | | |D |080310|F| |01| DOCUMENT REF DATA=SAE AMS 2631 | | |E |171201|A| | | DOCUMENT REF DATA=ASTM-D4066 | | | |130701|A| | | DOCUMENT REF DATA=ASTM-D6456 | | | |100801|A| | | DOCUMENT REF DATA=SAE AMS 6931 | | |D |171201|A| | | DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=MIL-DTL-15024 | | |G |180303|A| | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=QPL 25027 | | |17 |000207|A| | | DOCUMENT REF DATA=MIL-DTL-32258 | | | |210601|A|2 | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810724|A| 1| | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=A-A-59004 | | |B |181118|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=0900-LP-001-7000 | | | |810101|C| |01| DOCUMENT REF DATA=AIA/NAS NASM 25027 | | |1 |121221|A| | | DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=T9074-AS-GIB-010/271 | | |1 |140911|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 ;Complete 5 inch, 3 way Ball Valve must be in accordance with Newport News Shipbuilding drawing 6404977, Assembly 96 and engineering report 5959311C5 and engineering notice 117895, except as amplified or modified herein. Less hydraulic actuator (Find 74).; 3.1.1 ;Bolt holes on mounting flange(s) must not be drilled.; 3.1.2 ;All actuator associated mounting parts must be supplied in a bag attached to the valve.; 3.2 ;NOTE: The thermocouple hole for ball (Find 31) is not required.; 3.3 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Body, Find 25; Material - ;ASTM-B369, Alloy UNS C96400; Part - ;Stem Retaining Nut, Find 17; Material - ;ASTM-B139, Alloy C51000, Temper H04; Part - ;Tailpiece, Find 40; Material - ;QQ-N-281, CL A, Form 2, Cond Hot Finished, High Tensile (Stress Relieved); Part - ;Continuous Threaded Studs, Find 44; Material - ;MIL-DTL-1222, QQ-N-286, Type IV, Annealed and Age Hardened; Part - ;Stem, Find 62; Material - ;QQ-N-286, Form 2, Annealed and Age Hardened; PART - ;Self-locking Heavy Hex Nuts, Find 36; MATERIAL - QQ-N-281, Class A or B, with chemical composition in accordance with MIL-DTL-32258. NOTE: All material must be the same Class. SELF-LOCKING ELEMENT - For 250 degree nuts use ASTM-D6456, Type 1 or ASTM-D4066, Group 01, Class 1 or 2, Grade 1, 2, 3, 4, 5,or 6. For 450 degree nuts use ASTM-D6456, Type 1. Part - ;Ball (Q3), Find 31; Material - SAE-AMS-6931 OR Centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as listed in supplementary Requirement S6. Note: Mechanical properties for bars, forgings and forging stock over 10" must be as specified in the applicable drawing. If the mechanical properties are not provided in the drawing, the mechanical properties specified in SAE-AMS-6931 Table 2 for material 6" to 10", must be applied. Part - ;Seats (Q3), Find 22; Thrust Washer, Find 20; Bearing, Find 53; Material - Delrin: Dupont AF DE588 (Teflon Filled Acetal) (Properties Specified Below Only) ITEM PROPERTY ASTM TEST METHOD VALUE (A) Specific Gravity D792 (Note 1) 1.50 - 1.57 (B) Melting Point D2133 or D3418 172 - 184 deg C (342 - 363 deg F) (C) Tensile Strength (MIN) D638 (Notes 1 & 5) 6100 PSI (D) Tensile Impact (MIN) D1822 Type S (Notes 1 & 5) 5 FT-LB/SQ IN (E) Compressive Stress D695 2100 @ 1% DEF. (MIN - PSI) (Notes 1 & 5) 11,000 @ 10% DEF. (F) Water Absorption D570 .30% MAX 24 Hours (G) Rockwell Hardness (R) D785 (Note 1) 115 +/- 15 (H) Teflon Fiber Content (Note 2) 18 - 23% (I) Dimensional Change (Note 4) .7% MAX NOTES: 1. Material conditioning prior to test is at the vendor's option. 2. Teflon Fiber Content - As certified by DuPont (raw material). 3. Visual and Dimensional Inspection of Product (Final Machined Condition) - White Teflon string inclusions must not exceed the following: A. Diameter 1/32" B. Length 1/8" C. Density 6 indications per 100 SQ IN 4. The test method to determine dimensional stability must be performed as follows: The test specimens (finished pieces) tested must be measured at 23 +/- 3 deg C (73 +/- 5F) and placed in a mineral oil bath maintained at 160 +/- 3 deg C (320 +/- 5F) the specimens must remain in the bath for six (6) hours at temperature and allowed to slow cool in the bath at a rate not to exceed 23 +/- 3 deg C (73 +/- 5F) per hour. When the bath reaches 23 +/- 3 deg C (73 +/- 5F), the test specimens must be removed and measured. The percent change in each dimension, outside diameter, inside diameter and thickness must not be greater than the value specified. ^Mineral oil meets the specification as listed below: Description.......................Passes U.S.P. Test (USP XX, P.1143) Solubility........................Passes U.S.P. Test (USP XX, P.1143) Neutrality........................Passes U.S.P. Test (USP XX, P.532) Readily Carbonizable Substances...Passes U.S.P. Test (USP XX, P.532) Limit of Polynuclear Compounds....Passes U.S.P. Test (USP XX, P.532) Solid Paraffin....................Passes U.S.P. Test (USP XX, P.532) Specific Gravity @ 25 deg C (77 deg F).0.8600 to 0.8900 Viscosity @ 37.8 deg C (100F).....73.6 to 84.4 Centistokes (340-390 SUS) Flash Point Cleveland Open Cup....420 deg F (216C) (Typical) Refractive Index @ 20C (68F)......1.480 (Typical) 5. Values are minimum mean values. Individual specimen values may not vary more than 25% below the specified minimum mean value. Should one specimen exceed the 25% criteria, retest is required. Failure to meet the above criteria a second time is cause for rejection. ;The Thrust Washer, Find 20 and Bearing, Find 53 do not require chemical and mechanical certifications.; 3.4 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings is still required, but certifications are only required as listed below. Test - ;Liquid Penetrant Inspection; Item - ;Stud, Continuous Thread, Find 44; Performance - T9074-AS-GIB-010/271; Sampling must be per MIL-DTL-1222 Acceptance - MIL-DTL-1222 Test - ;Dye Penetrant Inspection for Non-Magnetic Grades; Item - ;Self-locking Heavy Hex Nuts, Find 36; Performance - T9074-AS-GIB-010/271 or ASTM-E1417/ASTM-E1444 (Method C solvent removal techniques must not be used on thread) Acceptance - ;NASM25027 with sampling in accordance with MIL-DTL-32258; Test - ;Ultrasonic Inspection on Starting Material; Item - ;Ball, Find 31 (If Starting Material per SAE-AMS-6931); Performance - ;SAE-AMS-6931 and SAE-AMS-2631; Acceptance - ;SAE-AMS-2631; Attribute - Annealing and Age Hardening Item - ;Stem, Find 62 and Stud, Find 44; Performance - QQ-N-286 Test - Ultrasonic Inspection on Starting Material Item - ;All Items requiring certification made from QQ-N-286 with a diameter or minimum distance between parallel surfaces of 4 inches or greater of the starting material, or when required by a drawing or specification invoked elsewhere in this contract; Performance - T9074-AS-GIB-010/271 or MIL-STD-2132, and QQ-N-286 Acceptance - QQ-N-286 Test - Weldability Test of ASTM-B369 material Item - ;Body, Find 25; Performance - ASTM-B369 Acceptance - ASTM-B369 Test - Quality Conformance Tests Item - Self-Locking Nuts Performance - ;MIL-DTL-32258; Acceptance - ;MIL-DTL-32258; Attribute - Certificate of Completion Item - Self-Locking Nut Nonmetallic Insert Performance - ;ASTM D6456, Type 1 or ASTM D4066, Group 01, Class 1 or 2, Grade 1, 2, 3, 4, 5, or 6; Attribute - Certificate of Compliance Item - Self-Locking Nuts Performance - This Certificate must state that self-locking nuts were manufactured by an approved source. Approved sources are those listed on QPL-25027 for the appropriate fastener. This QPL may also be considered as approved sources for Heavy Hex self-locking nuts. Test - ;Production Test; Item - ;Valve Assemblies; Performance - ;General Note 19 on drawing 801-6404977; Acceptance - ;General Note 19 on drawing 801-6404977; Test - Non-Destructive Tests Item - ;Weld Repair and/or Production Weld (as applicable); Performance - Per applicable fabrication specification Acceptance - Per applicable fabrication specification 3.5 O-ring grooves and mating sealing surfaces must be inspected per the contractually invoked drawings or specifications. When the drawings or specifications do not provide specific defect criteria or state that no defects are allowed, the General Acceptance Criteria (GAC) standard must be used for inspecting O-ring grooves and mating sealing surfaces only. Repairs to sealing surfaces and O-ring grooves with unacceptable defects may be accomplished within the limits of the size and tolerances provided in the applicable drawing. Repairs thatwould exceed these limits require approval (including final dimensions). The data that is red lined (crossed out) is excluded from the GAC for this contract and is not to be used for acceptance or rejection criteria. The GAC document is identified as Contract Support Library Reference Number CSD008 at https://register.nslc.navy.mil/ 3.6 A visual inspection shall be performed on the finished seat with acceptance criteria on critical surfaces per CSD167 in the ECDS (Electronic Contractor Data Submission) system at: https://register.nslc.navy.mil/. 3.7 Radiography is required on ;Body, Find 25; . 3.8 The pressure tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For pressure tests below 100 PSIG, the pressure tolerance must be +1 PSIG / -0 PSIG. For pressure tests at or above 100 PSIG up to and including 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 50 PSIG. For pressure tests above 2500 PSIG, the pressure tolerance must be +2% / -0 PSIG, rounded off to the nearest multiple of the smallest graduation on an analog test pressure gauge, not to exceed 200 PSIG. The pressure test time tolerance must be as specified in the assembly drawing, detail drawing, design specification or elsewhere in this contract. Where pressure test time tolerances are not provided by drawings, specifications or specified elsewhere in this contract, the following must be used: For a test duration up to and including 1 hour, the tolerance must be +5 minutes / - 0 minutes. For a test duration of more than 1 hour up to and including 24 hours, the tolerance must be +30 minutes / - 0 minutes. For a test duration of more than 24 hours, the tolerance must be +60 minutes / - 0 minutes. 3.9 Confidential Hydrostatic Test Pressures - When test pressures are confidential, certification must reference ;830-6404016, Rev B; and the item number to which the item was tested in lieu of the actual pressures. Any drawing requirement to mark the working pressure on the item does not apply and is strictly prohibited. 3.10 Ball Spherical Surface Waviness - Unless otherwise specified on drawing, all sealing area surfaces must have a spherical surface waviness which does not exceed 0.0005 inches of height per inch of spherical surface. Roughness and waviness ratings must apply in a direction which yields the maximum rating, normally perpendicular to the lay. 3.11 ;Surface waviness must be verified prior to Teflon coating.; 3.12 Chemours Company (formerly DuPont) Teflon Coating 850G-204 and 852G-201. Use of Chemours Company (formerly DuPont) Teflon Coating 851N-204 and 852N-201 is acceptable until exhausted - Teflon coating of ball(s) must be in accordance with general note ;2.C; of drawing ;803-5959311; . 3.12.1 Naval Ordnance Systems Command OD 10362 First Revision dated 15 Aug 1961 is provided by Contract Support Library Reference Number CSD018 in ECDS at https://register.nslc.navy.mil/ 3.12.2 CSD099 provides guidance for acceptance/rejection of teflon-coated valve balls after valve assembly production testing. 3.13 Contract Support Library - Additional requirements for this item are identified as Contract Support Library Reference Number ;CSD099; in ECDS at https://register.nslc.navy.mil/ 3.14 Seat Stack Height Measurement - To ensure that each seat is within tolerance, check each seat singularly by measuring the seat height over the ball. This measurement is calculated by adding one-half ball diameter to the half stack height dimension on the drawing. Limits are determined by the ball diameter tolerance and the half stack height tolerance. Check dimensions by measuring from the seat back face to top of ball. Manufacturers of seats that do not have a ball of the required size available will be required to manufacture a dummy ball or segment of a ball with sufficient spherical surface to check the above dimension. 3.15 Slow Strain Rate Tensile Test Laboratories - The Slow Strain Rate Tensile Test of QQ-N-286 must be performed by one of the following laboratories: Huntington Alloys, a Special Metals Company Attn: Bill Bolenr 3200 Riverside Drive Huntington, WV 257059 Phone: +1 (555) 000-0000 FAX: +1 (555) 000-0000 Metallurgical Consultants, Inc. Attn: W. M. Buehler 4820 Caroline PO Box 88046 Houston, TX 77288-0046 Phone: +1 (555) 000-0000 FAX: +1 (555) 000-0000 Naval Surface Warfare Center, Carderock Division Attn: Eric Focht Code 614 9500 Macarthur Blvd West Bethesda, MD 20817-5700 Phone: +1 (555) 000-0000 FAX: +1 (555) 000-0000 Teledyne Allvac Attn: Dr. W. D. Cao 2020 Ashcraft Ave. Monroe, NC 28110 Phone: +1 (555) 000-0000 FAX: +1 (555) 000-0000 Westmoreland Mechanical Testing and Research Inc. Attn: Andrew Wisniewski P.O. Box 388 Youngstown, PA 15696-0388 Mannesmann Rohrenwerke Mannesmann Forschungsinstitut (MFI) Attn: Dr. Weiss Postfach 251160 47251 Duisburg Germany Phone: 011-49-0203-9993194 FAX: 011-49-0203-9994415 ThyssenKrupp VDM USA, Inc. Attn: D. C. Agarwal 11210 Steeplecrest Drive, Suite 120 Houston, TX 77065-4939 Phone: +1 (555) 000-0000 3.16 K-MONEL Fasteners - Material must be heat treated per QQ-N-286. 3.16.1 Fasteners that have been hot or cold headed or roll threaded must be solution annealed followed by age hardening subsequent to all heading and thread rolling operations. The mechanical properties on certifications must be actual properties of the annealed and age hardened material and must meet the requirements of QQ-N-286. 3.16.2 QQ-N-286 fasteners that have been headed and/or roll threaded must not beage hardened unless the material has been solution annealed subsequent to the heading and threading operations. Threads formed after the final age hardening heat treatment must be cut or ground only. 3.17 K-MONEL Fasteners - K-MONEL externally threaded fasteners must have mechanical properties determined in accordance with MIL-DTL-1222. Test results must include Tensile, Yield, Elongation and Hardness as required by MIL-DTL-1222. (The Hardness tests must be performed on a full size fastener.) 3.17.1 Studs require an Axial Tensile test in accordance with MIL-DTL-1222. 3.17.2 Headed fasteners require a Wedge Tensile test as specified elsewhere in this contract/purchase order. 3.18 Thread Inspection Requirements - All threads on threaded parts must be inspected using appropriate inspection methods, inspection systems, and inspection gages/instruments in accordance with FED-STD-H28 series. Substitution of thecommercial equivalent inspection in accordance with ASME B1 series is acceptable. 3.18.1 System 21 of FED-STD-H28/20 must be used as a minimum inspection requirement for threads when the design drawing or design specification does not specify an inspection requirement. 3.18.2 For Navy and Shipyard drawings, system 21 of FED-STD-H28/20 may be substituted for System 22 without further Navy approval when the design drawing invokes System 22 and does not cite governing specifications that specifically require system 22. System 22 of FED-STD-H28/20 must be used when the drawing references other governing specifications that specifically require System 22, such as certain thread types of MIL-DTL-1222. 3.18.3 A written request for concurrence must be submitted when utilizing alternative measuring equipment or measuring systems not applicable to the specified inspection system. 3.19 Thread Lubricant - Thread lubricants containing molybdenum disulfide must not be used on this material. Bacteria in water, especially seawater, causes molybdenum disulfide to break down. The by-products of the breakdown form compounds which attack the fasteners. Anti-galling compound A-A-59004 must be used as a replacement when thread lubricant is required for assembly. 3.20 Component Identification Description (CID) - When applicable drawing(s) and/or specification(s) specify that a nameplate or identification plate is required, the CID number ( ;CID 884305891; ) must be added. When no plate is specified, an identification plate in accordance with MIL-DTL-15024, Type "C" on brass or Type "H" on aluminum must be securely attached to each assembly showing the above CID number. No assembly must be shipped without the CID number attached. 3.21 Specification Change - For QQ-N-281, Class B material: 1 - Footnote 9 to Table II of QQ-N-281 does not apply. 2 - When starting material is Round Bar greater than 3" dia, the mechanical properties of Hex Bar apply. 3.22 Internal Threads - All internal threads must be formed by cutting. Cold forming of internal threads is not acceptable. 3.23 Welding or Brazing - When welding, brazing, and allied processes are required, as invoked by Section C paragraph 3 requirements, they must be in accordance with S9074-AR-GIB-010A/278, 0900-LP-001-7000 for brazing of piping and pressure vessel applications, or S9074-AQ-GIB-010/248 for brazing of other applications. For all production and repair welding and brazing, personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, as applicable. Repair welding is not permitted on ;QQ-N-286 material; . Procedures and Qualification Data must be submitted for review and approval prior to performing any welding or brazing. 3.24 Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format. Definitions are provided elsewhere in the Contract/Purchase Order. 3.24.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide a copy of this request to the QAR. Requests must include the information listed below. a. A complete description of the contract requirement affected and the nature of the waiver/deviation (non-conformance), including a classification of Critical, Major, or Minor. b. Number of units (and serial/lot numbers) to be delivered in this configuration. c. Any impacts to logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel or impacts to the operational use of the product. d. Information about remedial action being taken to prevent reoccurrence of the non-conformance. 3.24.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted using the ECDS (Electronic Contractor Data Submission) system at https://register.nslc.navy.mil/ 3.24.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract. ECPs must be prepared in Contractor format, and must include the following information: a. The change priority, change classification (Class I or Class II), and change justification. b. A complete description of the change to be made and the need for that change. c. A complete listing of other Configuration Items impacted by the proposed change and a description of the impact on those CIs. d. Proposed changes to documents controlled by the Government. e. Proposed serial/lot number effectivities of units to be produced in, or retrofitted to, the proposed configuration. f. Recommendations about the way a retrofit should be accomplished. g. Impacts to any logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel in support of the product. h. Impacts to the operational use of the product. i. Complete estimated life-cycle cost impact of the proposed change. j. Milestones relating to the processing and implementation of the engineering change. 3.25 Mercury Free - Mercury and mercury containing compounds must not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Mercury contamination of the material will be cause for rejection. 3.26 NAVSEA 0948-LP-045-7010 - Any applicable requirements of NAVSHIPS 4410.17,NAVSEA 0948-LP-045-7010, or 0948-045-7010 which the contractor must meet are included in this contract/purchase order. The above documents are for GovernmentUse Only. Further application of the above documents is prohibited.prohibited. 3.26.1 Marking of material with a Material Designator per the Drawing is also prohibited, with the exception of Fasteners. Fasteners must be marked with a Material Symbol/Designator as specified elsewhere in this contract. 3.27 Certificate of Compliance - (SPECIAL EMPHASIS MATERIAL) The Contractor must prepare and submit a certificate of compliance certifying that the items/components furnished under this contract comply with the requirements of the procurement document, including any/all invoked specifications and drawings. ^ QUALITY ASSURANCE REQUIREMENTS ^ 3.28 See CDRL DI-MISC-80678 (Test Certification) - A statement of tests performed, listing the pieces tested must be furnished along with a copy of the test results. Certification must include the contractor's name, address and date, quantity inspected, identified to the contract/purchase order and item number, and the Contractor's or authorized personnel's signature. Test certifications must reference the standard/specification, including the revision, to which the testing was performed and the acceptance criteria used. Test procedure numbers may also be referenced on test reports. Test reports on weldments must be identified to weld joint and layer. 3.29 Welding Requirements - When production or repair welding is required, the applicable w...