Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONTRACTOR FIRST ARTIC

Active
SPE7MC-26-T-166XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a flow control valve for E/I winch hydraulic systems, with material requirements limited to aluminum or bronze. An exception is noted where the original equipment manufacturer has updated the part number to R431002638, which is now acceptable alongside the drawing-referenced part number P50493-0001. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to defense information controls under RD002 and must comply with DLA packaging standards under RP001. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the origin. Government identification must be removed from rejected supplies, and technical data associated with the valve is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without authorization. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and formal DLA approval. The NSN is 0001S00000053, with 74 units requested under purchase request 7017697083, delivery due in 499 days after award. The solicitation is issued under SPE7MC-26-T-166X as a total small business set-aside, with the contracting activity managed by DLA District San Joaquin, and responses due by August 17, 2026.

General Info

75 flow control valves, small business set aside, delivery by 499 and 120 days, bid due August 17, 2026

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(1)

SPE7MC-26-T-166X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,FLOW CONTROL
VALVE,FLOW CONTROL
E/I WINCH HYDRAULIC.
MATERIAL. ALUMINUM OR BRONZE
EXCEPTION TO DWG: OEM OF MATERIAL TO BE ALTERED HAS UPDATED THE PART
NUMBER TO READ R431002638. THIS PART NUMBER AS WELL AS PART NUMBER
P50493-0001 (WHICH IS CALLED OUT ON THE DWG) ARE ACCEPTABLE.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been
SPE7MC-26-T-166X
SECTION B
approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000053 Quantity: 74 EA Purchase Request: 7017697083QTY - See Solicitation Delivery: 499 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-248U
A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M1-26-T-248N
A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
REPAIR KIT, VALVE
Solicitation # SPE7MC-26-T-166P
This contract covers the procurement of a repair kit for a valve, identified by NSN 4810017381935 and part numbers MNM90036003 and SA-E-402054, furnished in kit form under the solicitation SPE7MC-26-T-166P. The items are classified as critical application components and must comply with strict environmental and safety standards, including an outright prohibition on the use or incorporation of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific exempted uses such as in batteries, fluorescent lights, instrumentation, weapon systems, or authorized chemical reagents. All mercury-containing portable lamps and instruments must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E Appendix D for kits, with marking compliant with MIL-STD-129 and palletization per DLA packaging guidelines. The contract is awarded in two units: one for USS Asheville SSN 758 and another for USS Jefferson City SSN 759, each requiring delivery of one kit within 20 days FOB destination, with no tolerance for quantity variance. Preservation, packaging, and marking are fully specified, and all shipments must follow DLA procedures for transportation and addressing, with delivery dates set for August 4, 2026. The Defense Logistics Agency is the contracting authority, with Paula Mcclary as the primary point of contact.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-167D
The contract pertains to the procurement of two butterfly valves with part number 24JG56431X and NSN 4820-01-728-8390, supplied by Crane Co Valve Division. The valves are designated as a critical application item and must comply with strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier, as mandated by NAVSEA 5100-003D. The valves are to be delivered FOB origin within 140 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with special marking code 00-00 indicating no additional requirements. Palletization follows DLA’s RP001 packaging requirements. Delivery is directed to the designated receiving warehouse in Tracy, California, with a need ship date of January 5, 2027, and an original required delivery date of February 28, 2027. The contract was issued under solicitation SPE7MC-26-T-167D by DLA Dist San Joaquin, a Department of Defense agency, with the point of contact being Paula Mcclary.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7M1-26-T-249A
This contract specifies the procurement of two valve bodies identified by NSN 4820-01-416-7875 and part number J41548, supplied by approved vendors including INDUSTRIAL SERVICE AND SUPPLY, INC and PULSAFEEDER INC. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. The items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements outlined in MIL-STD-129, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, and any portable mercury-containing devices must include shockproof construction and secondary containment in accordance with NAVSEA 5100-003D. The delivery destination is Fort Eustis, Virginia, with shipments required to be sent via the fastest traceable means excluding parcel post. The contract falls under DLA’s technical and quality requirements referenced from the DLA Master List, and the acquisition is subject to the version of that list in effect on the solicitation issue date. The purchase request number is 7017722221 with a total price of $2.00 per unit, and the required delivery date is August 4, 2026. The contracting office is under the Department of Defense’s Maritime Supply Chain, with contract data managed through the DIBBS system and point of contact listed as Misty Eckard.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
DIAPHRAGM, VALVE, FLA
Solicitation # SPE7MC-26-T-166H
The contract pertains to the procurement of one diaphragm for a valve, identified by NSN 4820-01-291-5929 and part number NB33193472, supplied by Leslie Controls, Inc. The item must be delivered within 20 days FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containers, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and shipment must utilize traceable freight methods—parcel post is prohibited. The delivery address is USS New York LPD 21, FPO AA 34092, with a required delivery date of July 30, 2026. Strict prohibitions ban intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for approved exceptions such as functional uses in batteries, sensors, or instruments specified by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or amendment date for large acquisitions. The solicitation number is SPE7MC-26-T-166H, issued by the Defense Logistics Agency under NAICS code 332911, with Paula Mcclary as the primary point of contact.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M0-26-T-028K
The contract specifies the procurement of a ball valve with a copper alloy body, identified by NSN 4820-01-290-4931 and part number 70-607-01, with a required quantity of six units. Delivery is due within five days of contract award, with shipment to be made FOB origin using the fastest traceable means, explicitly prohibiting parcel post. The valves must comply with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-V-3 for preservation and packaging, with preservation method ZZ requiring Level A preservation as specified in the commodity standard. Marking must adhere to MIL-STD-129, and no special marking is required. The item is designated as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific authorized applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, with zero variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for all R and I编号 specifications, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The delivery address is the Portsmouth Naval Shipyard in Kittery, Maine, with the receiving officer located in Building 170. The required delivery date is August 3, 2026, and the contracting officer contact is Kathleen Hipes with the DLA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-167F
The contract specifies the procurement of five safety relief valves, identified by NSN 4820-01-521-3089 and part number P052935-00044, manufactured by TIMKEN GEARS & SERVICES INC. The item is designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and packaging guidelines, with palletization following DLA’s RP001 requirements. The contract requires delivery of all units FOB origin within 140 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery address is DLA Dist San Joaquin in Tracy, California, and the original required delivery date is January 15, 2027, with a need ship date of January 5, 2027. The solicitation, issued under contract number SPE7MC-26-T-167F, was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 332911. All shipments must follow DLA Transportation Procurement Notes C19 and C20, and the point of contact for the solicitation is Paula McClary, reachable via email and phone as provided.
DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M0-26-T-029J
The contract specifies the procurement of two ball valves, part number M3824-11 and M3824PC4, manufactured by Parker Hannifin Corporation, with NSN 4820-01-606-6710, under solicitation SPE7M0-26-T-029J. Delivery is required within five days to the Norfolk Naval Shipyard in Portsmouth, Virginia, with FOB origin terms and no variance allowed in quantity. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, including specific packaging codes and containment methods, and must be shipped via traceable freight—parcel post is prohibited. The valves must be free from intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemically specified reagents as authorized by NAVSEA, and any portable devices containing mercury must meet shockproof and secondary containment standards per NAVSEA 5100-003D. The contract enforces the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date, and includes special handling instructions for government use, including designated point of contact, delivery tracking, and project identifiers, with a required delivery date of August 3, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-167A
This contract specifies the procurement of a check valve designated as a hydraulic fuse, constructed from aluminum alloy, with an operating pressure rating of 3000 psi and a maximum temperature range from minus 65 to plus 275 degrees Fahrenheit. The valve must conform to military specifications MS33514-6 through MS33514-8 and is classified as a critical application item for pneudraulics systems. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by identifiers such as RQ011, RP001, and others incorporated by reference, which supersede any other standards including ASTM D3951. The item, identified by NSN 4820004889386 and part number 9360 from PNEUDRAULICS, INC., is to be delivered in accordance with MIL-STD-129 packaging and labeling standards, with palletization strictly following DLA packaging requirements. Five units are required, each at a unit price of $5.00, with no variance allowed in quantity. Delivery is FOB origin with inspection and acceptance occurring at the destination. The shipment must be sent to DLA Distribution Warner Robins in Georgia by January 1, 2028, with an original required delivery date of May 5, 2028. The solicitation, issued under SPE7MC-26-T-167A, is a total small business set-aside under NAICS code 332911, with contracting points of contact and procedural details outlined in associated DLA documentation.
WARNER ROBINS

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-166Z
The contract is for the procurement of 29 units of a SEAT, VALVE with NSN 4810-00-166-0565 and part number 170008 from LOURDES INDUSTRIES, INC., under solicitation SPE7MC-26-T-166Z. The item is classified as a critical application item and must be delivered within 50 days to the DLA Distribution Cherry Point facility in North Carolina, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization governed by DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers take precedence and are sourced from the DLA Master List of Technical and Quality Requirements. The supplier is required to maintain a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, and all government identification must be removed from non-accepted supplies. The unit price is $29.00 per each, with a total value of $841, and the original required delivery date is January 1, 2027. The contract is awarded by the Department of Defense under NAICS code 332911, with primary point of contact Paula McClary, and all transportation instructions must align with DLAD PROC NOTES C19 and C20.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CALIBRATED FL
Solicitation # SPE7MC-26-T-166Y
The contract is for the procurement of one calibrated flow valve identified by NSN 4820-01-508-6954 and part number 2353-1431CRS from ROMAC INDUSTRIES, INC., under solicitation SPE7MC-26-T-166Y. Delivery is required within 20 days to the USS SAN ANTONIO LPD 17 at FPO AE 09587, with delivery terms FOB destination and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, MIL-STD-129, and DLA’s packaging requirements, including palletization per RP001. The item is designated as a critical application and must not contain any Class I ozone-depleting chemicals, with any substitutions requiring prior approval. All technical and quality requirements referenced by an R or I number must be sourced from the DLA Master List, which takes precedence over any conflicting specifications. The contract specifies unit of issue as each, a total price of $1.00, and uses the DoD authorized unit. Transportation and shipment details reference DLAD PROC NOTES C19 and C20, with the RDD number 777 and project code LK5 TP 2. The contract is governed by the DLA, with primary point of contact Paula Mcclary, and is issued under NAICS code 332911. The original required delivery date is July 16, 2026, and the solicitation was posted August 4, 2026, with responses due by August 17, 2026.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 335999
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-Q-0447
The contract pertains to the procurement of 86 electrical heating elements, nonimmersion type, identified by NSN 4520-01-391-8325, under solicitation SPE8E8-26-Q-0447, with a required delivery within 90 days of award. The procurement is managed by DLA Dist San Joaquin under the Department of Defense, with performance to occur in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates DLA packaging requirements and affirms that covered defense information may apply. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The point of contact for inquiries is Jennifer Luczkowski, with email and phone provided, and responses are due by August 11, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7L7-26-T-4560
The contract under solicitation number SPE7L7-26-T-4560 is for Production Lot Testing of an item with NSN 0001S00000062, quantity 449 units, to be delivered within 699 days after award. The work is performance under the Department of Defense through DLA San Joaquin, with the place of performance located in Tracy, California, 95304-5000. The solicitation was posted on August 4, 2026, with proposals due on August 17, 2026, and falls under NAICS code 335910 for other electrical equipment and component manufacturing. The contractor must conduct production lot testing and prepare a formal test report labeled clearly with the contract number and lot/item number, then present it to the Quality Assurance Representative for review. All shipments of PLT reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving reports, a copy of the contract or order, all applicable test reports showing actual results against specified tolerances, material and process certifications, operation and inspection method sheets, and drawings used in manufacturing the tested samples, with proper markings to restrict public disclosure and limit government use as required. Primary point of contact for inquiries is Molly Teegarden, reachable at 614-557-3110 or molly.teegarden@dla.mil.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332913
New
DIBBS
BUBBLER, DRINKING FOUNT
Solicitation # SPE8E8-26-T-4957
The contract is for the procurement of 120 units of a bubbling drinking fountain with part number 030774-006 and NSN 4510014733230, awarded under solicitation SPE8E8-26-T-4957 by the Defense Logistics Agency District San Joaquin. Delivery is required within 58 days of contract award, with all items to be shipped FOB origin and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific unit packaging, cushioning, and marking requirements, with no special marking codes applied. The item is classified as a critical application item and must adhere strictly to DLA packaging and technical requirements, including the prohibition of intentional use of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lamps, and instrumentation meeting NAVSEA 5100-003D standards, which must include secondary containment. Delivery is to be made to the designated warehouse in Tracy, California, and transportation logistics follow DLA procedural notes C19 and C20. The contract specifies a zero variance on quantity, with a required delivery date of August 4, 2026, and solicitation responses due by August 17, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and source approval documentation must be submitted under RC001 for any non-conforming suppliers.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L7-26-Q-2111
The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333924
New
DIBBS
FILTER ELEMENT, REVE
Solicitation # SPE8E8-26-T-4955
The contract pertains to the procurement of 131 filter elements for reverse osmosis systems, identified by NSN 4610-01-589-8131, under purchase request 7017286982. Delivery is required within 67 days of award, with performance designated for Tracy, California, ZIP 95304-5000. The solicitation number is SPE8E8-26-T-4955, issued by the DLA San Joaquin under the Department of Defense, with a posted date of August 4, 2026, and a response deadline of August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. The NAICS code 333924 indicates the product category, and the contracting office is managed by Alexis Selby, reachable via email and phone. Government identification must be removed from non-accepted supplies as per RQ011, and all submissions must comply with the DLA packaging standards outlined in RP001.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 325612
New
DIBBS
POLISH, PLASTIC
Solicitation # SPE8E5-26-T-3766
This contract specifies the procurement of Polish, Plastic under solicitation SPE8E5-26-T-3766, with a required delivery of 115 cases to be shipped FOB origin within 82 days, targeting a need ship date of June 24, 2026, and an original delivery deadline of November 29, 2026. The item is identified by NSN 7930-01-669-3161 and is classified as a Type I, non-extendable shelf-life item with a 36-month expiration period, subject to strict packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129, including special labeling code 32 for shelf-life type. Packaging must comply with DLA’s established standards, using a U code, dry preservative method, and intermediate container D3, without cushioning or dunnage, and must be palletized according to DLA guidelines. The contract enforces zero variance in quantity delivery and mandates inspection and acceptance at the destination, with government identification removed from non-accepted items. Technical and quality requirements are incorporated by reference from the DLA Master List, and the item is subject to Covered Defense Information protocols. Delivery is directed to DLA Distribution San Joaquin in Tracy, CA, and transportation follows DLA procedural notes C19 and C20. The unit of issue is the case, with a total contract value of $115.00 per case, and all terms are governed by the DLA revision in effect at the solicitation date.
Polish and Other Sanitation Good Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
ANALYZER-CHARGER, BA
Solicitation # SPE7L7-26-T-4561
The contract pertains to the procurement of 456 units of the 490PT+ Pulse Tech Digital Battery Analyzer Tester & Printer, identified by NSN 6130015109594 and part number 741X890, under solicitation SPE7L7-26-T-4561, awarded as a Total Small Business Set-Aside. Delivery is required FOB origin within 128 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination facility in Tracy, California. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting commercial standards, and must be marked, labeled, and packaged in accordance with MIL-STD-129 and RP001 packaging guidelines. Hazardous material provisions prohibit intentional addition of mercury or mercury-containing compounds unless exempted for specific functional components such as batteries or sensors, and portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet ASTM D3951 for non-hazardous items or FED-STD-313 TQ IP025 for hazardous materials. The unit of issue is each, with a total contract value based on a unit price for 456 units, and shipping must adhere to DLA transport procedures C19 and C20. The solicitation closed on August 17, 2026, with a required delivery date of April 15, 2027, and is managed by the Department of Defense through DLA Dist San Joaquin.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541612
New
DIBBS
NIST SP 800-171 Compliance Assessment & SPRS Reporting
Human Resources Consulting Services

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 326199
New
DIBBS
Supply of Decorative Laminated Plastic Sheets
All Other Plastics Product Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Delivery LogisticsThe contract requires the transportation and delivery of packaged valves via sea freight from the origin to a designated Department of Defense destination under the DLA Dist San Joaquin, with a strict delivery deadline of 165 days. All shipments must adhere to military standards for packaging, handling, and documentation to ensure integrity and compliance throughout transit. The place of performance is specified as Tracy, California, with a ZIP code of 95304-5000, indicating the final delivery point or primary logistical hub for coordination. This is a subcontract under NAICS code 484220, which classifies it as water transportation of freight, emphasizing oceanic shipping as the required mode of transport. The solicitation was posted on August 3, 2026, with responses due by August 6, 2026, indicating a rapid turnaround for proposal submission. While no specific point of contact or set-aside details are provided, the contract is managed under the broader Department of Defense logistics framework and must fulfill all contractual obligations tied to defense supply chain requirements.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 2 days
View Details