Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, FLOW CONTROL

Active
SPE7MC-26-T-135HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the procurement of 145 flow control valves, identified by NSN 4810011076317, with quantities of 31 and 114 units scheduled for delivery to DLA Distribution Cherry Point within 193 days from award. The only approved source for this item is manufacturer 99251 with part number 1611739-1, and all quotes must be submitted electronically through the official solicitation portal; hard copies are not available. The solicitation, numbered SPE7MC26T135H, was posted on July 13, 2026, with a response deadline of July 24, 2026, and is classified as a combined solicitation open to all responsible sources without set-aside restrictions. No specifications, plans, or drawings are provided, and interested vendors must rely solely on the information in the electronic solicitation document accessible via the SAM.gov link. The contracting office is part of the DLA Land and Maritime under the Department of Defense, located in Columbus, Ohio, with direct inquiries to be directed to the buyer’s official email as specified in the solicitation’s block 5 or through the DIBBS website using the solicitation number.

General Info

Procure 145 flow control valves NSN 4810011076317 from approved source 99251, deliver to Cherry Point within 193 days, e-submit via SPE7MC26T135H.

Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDGView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-135H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CHERRY POINT PHANTOM RD BLDG
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CHERRY POINT PHANTOM RD BLDG
View Agency Profile
Office AddressUS
Contacts
JANELLE HANLEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,FLOW CONTROL
VALVE, FLOW CONTROL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CRITICAL APPLICATION ITEM
MISSION SYSTEMS DAVENPORT INC. 99251 P/N 1611739-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015895849 0001 EA 31.000
NSN/MATERIAL:4810011076317
DELIVERY (IN DAYS):0193
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129.
SPE7MC-26-T-135H
SECTION B
PR: 7015895849 PRLI: 0001 CONT’D
The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:03/12/2026 Original Required Delivery Date:01/30/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7015895849 0002 EA 114.000
NSN/MATERIAL:4810011076317
DELIVERY (IN DAYS):0193
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE7MC-26-T-135H
SECTION B
PR: 7015895849 PRLI: 0002 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN 904-661-5135
JACKSONVILLE FL 32212-0103
US
Need Ship Date:12/18/2026 Original Required Delivery Date:01/30/2027
SPE7MC-26-T-135H NSN/Part Number: 4810-01-107-6317 Quantity: 31 EA Purchase Request: 7015895849QTY: 145 Delivery: 193 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
DIBBS
Precision Valve Manufacturing and AssemblyThe contract requires the precision manufacture and final assembly of a regulating valve specifically designed for gaseous oxygen service, with strict adherence to MIL-STD-1330 for cleaning procedures and MIL-STD-2073-1E for packaging standards to ensure safety and compatibility in high-oxygen environments. All work must be performed in compliance with rigorous military specifications to guarantee the valve's reliability, purity, and performance under critical operational conditions. The project is classified as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses as defined by the SBA are eligible to respond, with the NAICS code 332912 confirming the focus on other fabricated metal product manufacturing. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the Department of Defense, specifically the DDSP New Cumberland Facility, which oversees defense-related manufacturing and logistics. The contract is accessible through the DIBBS system under the reference number SPE7MC26T164V, and while no point of contact is provided, interested small businesses must submit proposals prior to the deadline to be considered for award, emphasizing the importance of timely and fully compliant submissions.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-26-T-147H
The contract pertains to the procurement of 12 units of a STEM fluid valve, specifically an E/I ball valve with NSN 4820011832221 and part numbers SP-82210 and SPM-H005B, supplied by IMI Critical Engineering PBM LLC. Delivery is required within 168 days from the directive date, with FOB origin terms and zero tolerance for quantity variance. The item is designated as a critical application item, necessitating strict adherence to military and defense specifications. Packaging must comply with MIL-STD-2073-1E using clean/dry preservation methods, unit packaging in boxes with bubble wrap cushioning, intermediate fiberboard containers, and palletization per DLA’s RP001 packaging requirements. All containers must be marked in accordance with MIL-STD-129, with no special marking required, and must include standardized barcoding for automated tracking. The contract explicitly prohibits the intentional incorporation of mercury or mercury-containing compounds into the hardware or its direct contact, except for specified exceptions such as batteries, fluorescent lights, weapons systems, and NAVSEA-approved reagents, with portable mercury-containing devices requiring shock resistance and secondary containment. Compliance with hazardous material labeling under 29 CFR 1910.1200 and MIL-STD-129 is mandatory, and any shipment containing radioactive materials above specified thresholds must also be clearly identified. The contract is administered under the Federal Acquisition Regulation with multiple FAR and DFARS clauses incorporated by reference, including requirements for sustainable products, employment eligibility verification, trafficking in persons, safeguarding contractor information systems, and NIST SP 800-171 compliance. Payment is governed by Wide Area WorkFlow (WAWF), requiring electronic invoicing with cost vouchers or invoice-receiving report combinations. Inspection and acceptance occur at the destination, with the government responsible for evaluating compliance. The delivery point is the DDSP New Cumberland Facility in Pennsylvania, and the solicitation, issued under SPE7MC-26-T-147H, closed for responses on August 6, 2026. Offerors must possess an active Unique Entity Identifier and CAGE code and may be required to represent small business or socioeconomic status, with full compliance mandated in the System for Award Management. The contract includes clauses on subcontracting, accelerated payments to small business subcontractors, and the U.S.-flag vessel requirement for ocean shipments, while prohibiting unauthorized obligations and
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-298U
This contract specifies the procurement of a nonmetallic hose assembly with NSN 4720-01-477-3927 and part number 7554102400, totaling 14 units to be delivered FOB origin within 161 days from the contract award, with no tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied, and palletization must adhere to DLA packaging requirements. The product is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date or award date depending on acquisition size. Inspection and acceptance occur at the destination, and the item must be delivered to DLA Distribution Albany at the specified transportation address in Albany, Georgia. The original required delivery date is January 23, 2027, with a contract solicitation number SPE7M4-26-T-298U issued on August 3, 2026, and responses due by August 14, 2026. The solicitation is classified under NAICS code 332912, managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar listed as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
ACTUATOR, ELECTROMEC
Solicitation # SPE7MC-26-T-165D
This contract mandates the supply of two electromechanical actuators under solicitation SPE7MC-26-T-165D, with a delivery requirement of 400 days from the contract date and an original required delivery date of September 19, 2027. The items must be delivered FOB origin under strict packaging standards aligned with MIL-STD-2073-1E and MIL-STD-129, using prescribed methods for preservation, wrapping, and cushioning, with no special marking required. The contract enforces compliance with DLA packaging requirements and prohibits the intentional use of mercury or mercury-containing compounds in any supplied hardware, except for specified functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. It also bans Class I ozone-depleting chemicals and requires approval for all substitute chemicals. The contractor must meet CMMC Level 2 cybersecurity self-assessment requirements and adhere to technical and quality standards referenced via the DLA Master List of Technical and Quality Requirements. The shipment destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with no variance allowed in quantity. The contract is tied to NSN 4810015721965 and is issued under the Department of Defense, with Paula McClary as the primary point of contact for inquiries.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
FERRULE, BRAZING, TUBE F
Solicitation # SPE7M3-26-T-7808
This contract mandates the procurement of a ferrule for brazing tube fitting, designated as a critical application item with restricted sourcing, requiring prior engineering approval from the government design control activity. Only three approved suppliers—TPS 07649 with part number 88496, 81755 with part number 16VP128-3, and 07582 with part number 3507A001—are authorized to fulfill this requirement, with Technetics Group Daytona, Inc. and Senior Operations LLC explicitly named as qualified sources. The item is subject to stringent quality and technical standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications, including ASTM D3951 for packaging. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; all unspecified attributes are considered major and acceptance requires zero non-conformances in the sample lot. The contract specifies the delivery of 34 units, each identified by NSN 4730-01-219-8323, with a firm delivery schedule of 188 days from the contract award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must adhere strictly to MIL-STD-129 for marking and labeling, with palletization governed by DLA packaging requirements, and no variance in quantity is permitted. The unit of issue is each (EA), and all packaging must be in compliance with the contract’s specified QUP and DLA standards. The delivery destination is DLA Distribution San Diego, and the item must be shipped by the required date of February 19, 2027. The solicitation, issued under SPE7M3-26-T-7808, is a total small business set-aside under NAICS code 332912, with bids due by August 14, 2026, and the primary point of contact is William Cain of the Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
ELBOW, TUBE TO HOSE
Solicitation # SPE7M3-26-T-7641
The contract involves the procurement of 62 units of an elbow fitting designed to connect tube to hose, identified by NSN 4730011154346, under solicitation SPE7M3-26-T-7641 issued by the Department of Defense’s Fluid Handling Division. The item must conform to technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which supersedes all other referenced standards including ASTM D3951. Acceptable manufacturers include Parker-Hannifin Corporation, Textron Systems Corporation, and Danfoss Power Solutions II, LLC, with designated part numbers. The contract specifies delivery FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with an original required delivery date of January 4, 2027, and a need ship date of January 19, 2027, requiring fulfillment within 168 days after award. Packaging must comply with MIL-STD-129 for marking, labeling, and barcoding, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. Hazardous materials must be labeled in accordance with 29 CFR 1910.1200, unless exempt under specific federal statutes such as FIFRA or FDCA, and any such materials require prior submission of safety data sheets and label samples. Zinc plating is explicitly accepted as an alternative to cadmium plating. Inspection and acceptance occur at the destination, with the government retaining final authority. Invoicing must be conducted exclusively through Wide Area WorkFlow (WAWF), and payment is processed using the DoDAAC system. The solicitation incorporates FAR clauses relating to contract type, small business representation, employment equity, combating trafficking, and cybersecurity compliance under NIST SP 800-171. Offerors must possess a current UEI and CAGE Code, register in SAM, and disclose size status and socioeconomic certifications, including WOSB, SDVOSB, HUBZone, or SDB status if applicable. No pricing details are provided in the solicitation, and the contract type remains to be determined at award.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-298V
The contract pertains to the procurement of a nonmetallic hose assembly with NSN 4720-01-477-3927 and part number 7554102400, for a quantity of five units, at a unit price of $5.00, totaling $25.00. Delivery is required within 161 days from the contract award, with FOB origin shipping terms, and inspection and acceptance to occur at the destination. The hose assembly must be packaged in strict compliance with MIL-STD-2073-1E, including specific procedures for preservation, wrapping, and packaging codes, and marking must conform to MIL-STD-129 with no special marking required. Palletization and packaging follow DLA’s RP001 requirements. The delivery destination is DLA Distribution Barstow, Central Receiving Whse 7, in Barstow, California, with the same address used for freight shipping. The contract references the DLA Master List of Technical and Quality Requirements for applicable technical and quality standards, with revisions controlled by the solicitation issue date. The solicitation number is SPE7M4-26-T-298V, posted on August 3, 2026, with a response deadline of August 14, 2026, under NAICS code 332912, and the responsible office is the Department of Defense’s Fluid Handling Division. The point of contact is Blake Tushar, and transportation logistics must adhere to DLA Procurement Notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
CONNECTING LINK, RIGID
Solicitation # SPE7LX-26-U-9172
The contract is for the supply of 10 rigid connecting links under solicitation SPE7LX-26-U-9172, with a total small business set-aside and a North American Industry Classification System code of 332912. Delivery is required within 137 days of award, and technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date based on acquisition size. The item must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization; disclosure to foreign persons, including foreign nationals in the U.S., is prohibited without authorization. Manufacturers and non-manufacturers must meet tailored higher-level quality requirements, and any configuration changes require a formal engineering change proposal or variance request. Inspection and acceptance must occur at the origin, and non-destructive testing requirements specified on drawing 12292425, originally intended for castings, apply equally to parts fabricated from 347 stainless steel bar stock as an alternate material. CMMC Level 2 certification is mandatory for third-party assessors involved, and covered defense information protections are in force. The contracting office is the Department of Defense’s Strategic Acq Program Directorate, with primary point of contact Theodore Misiolek, and the solicitation opened on August 3, 2026, with proposals due by August 18, 2026. The NSN is 3040-01-109-4776, and the purchase request number is 1000238764.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-164V
This contract is for the procurement of a regulating valve designed for gaseous oxygen media, identified by NSN 4820-01-319-0745 and part number 0799-1607 from Victor Equipment Co. A total of 79 units are required at a unit price of $79.00, with a total contract value of $6,241. The delivery schedule mandates shipment within 17 days after award, with delivery made FOB origin and no tolerance allowed for quantity variance. Inspection and acceptance occur at the destination location, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking required. Cleaning must follow MIL-STD-1330, and palletization must meet DLA standards. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the valve unless part of a specified exception such as functional components in instruments or sensors as permitted by NAVSEA, and any portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. The solicitation is issued under contract number SPE7MC-26-T-164V as a total small business set-aside under NAICS code 332912, with a response deadline of August 14, 2026, and posted on August 3, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on procurement size. The unit of issue is each (EA), consistent with DLA’s authorized standards. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The primary point of contact for the contract is Alex Xanthakis of the Department of Defense’s DDSP New Cumberland Facility, reachable via email and phone. The delivery is scheduled for completion by October 10, 2026, with an initial ship date required no later than September 1, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
Supply of Shelf-Life Compliant Hazardous Fluid Handling ComponentsThe contract requires the supply of a specific fluid handling component with part number 3-359-8-12-110-06, ensuring that at least 85 percent of its shelf life remains at the time of delivery. The component must comply with NAVSEA 5100-003D specifications, confirming it is mercury-free, and must adhere to all applicable hazardous material handling standards. The solicitation is open as a subcontract under NAICS code 332912, with a response deadline of August 13, 2026, and was posted on August 2, 2026. Performance of the contract is specified to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting organization is the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT agency.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332912
New
DIBBS
Supply of Ported Ball Valve (CLIN 0001)The contract solicits the supply and delivery of a single ported ball valve that must fully comply with military packaging, labeling, and hazardous materials regulations, ensuring safe handling and transport according to defense standards. The item is designated under CLIN 0001 and is part of a subcontract under the NAICS code 332912, which pertains to other fabricated metal product manufacturing. The posting date is August 2, 2026, with a response deadline of August 13, 2026, providing potential vendors a twelve-day window to submit bids. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating the location where the valve must be delivered for military use. The acquiring organization is the DDSP New Cumberland Facility under the Department of Defense, which will oversee compliance with all technical, regulatory, and logistical requirements outlined in the solicitation. All submissions must adhere strictly to the specified military specifications, and bidders are expected to confirm their ability to meet these criteria prior to proposal submission.
DDSP NEW CUMBERLAND FACILITY

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332912
New
DIBBS
Precision Valve Manufacturing and Supply (Vent Valve)The contract mandates the manufacture or supply of a vent valve identified by NSN 4820017193374 and associated part numbers R5520401-A2 and R5520601-A2, ensuring full compliance with Department of Defense technical specifications. All units must be accompanied by certified material documentation and adhere to rigorous quality control standards to meet military-grade requirements. Performance is designated for N Stonington, Connecticut, with the delivery scope tied to strict adherence to DLA’s technical and procedural guidelines to support maritime supply chain operations. This subcontract opportunity, posted on August 2, 2026, with a response deadline of August 13, 2026, falls under NAICS code 332912 for other fabricated metal product manufacturing. The contracting entity is the Maritime Supply Chain under the Department of Defense, emphasizing the critical role the valve plays in defense logistics. Suppliers must respond through the official DIBBS portal to be considered, with no set-aside designation specified, leaving eligibility open to all qualified contractors capable of fulfilling the technical, quality, and delivery obligations under the specified timeframe.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → CHERRY POINT PHANTOM RD BLDG

Same awarding agency

NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-153E
The contract is for the procurement of 30 units of a check valve with NSN 4820-00-923-0625 under solicitation SPE7MC-26-T-153E, issued by the Defense Logistics Agency through its Land and Maritime Division. The delivery must be completed within 168 days from the Acceptance Delivery Order (ADO), with an anticipated need ship date of January 19, 2027, and a required delivery date of May 1, 2027, to the designated location at DLA Distribution Cherry Point, Phantom Rd Bldg 147 Bay A, Cherry Point, NC 28533-5040. FOB Destination delivery terms apply, and inspection and acceptance occur at the origin by the Government. Packaging must comply with ASTM D3951 and DLA’s RP001 requirements, with labeling governed by MIL-STD-129, including mandatory 2D Data Matrix barcodes and human-readable information as needed. The technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization and requiring contractor compliance with DLA’s JCP certification, training, and questionnaire approval prior to accessing controlled information. The contract incorporates a range of mandatory clauses from FAR and DFARS, including cybersecurity requirements under DFARS 252.240-7997 and 52.240-93, employment verification, combating human trafficking, and sustainable products compliance—all subject to deviations. The contractor must comply with hazardous material labeling per 29 CFR 1910.1200, and any radioactive components must be labeled according to MIL-STD-129. Invoicing is required through WAWF, and all deliveries must meet the specified packaging, marking, and traceability standards. The contract is classified as a simplified acquisition under the DLA Master Solicitation, likely Firm-Fixed-Price, with no pricing details provided in the solicitation, indicating it is awaiting offers. The offeror must submit proposals electronically via DIBBS by the August 3, 2026 deadline, and while socioeconomic certifications and representations are required under Section K, no specific offeror information is contained in the solicitation. The contract does not include an explicit statement of work but relies on referenced technical and quality standards, including the DLA Master
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-165U
The contract specifies a check valve with a corrosion-resistant body and seat, rated for a maximum pressure of 3000 PSI and designed for use with hydrocarbon fuels and oils within a temperature range of minus 65 degrees Fahrenheit to plus 275 degrees Fahrenheit. It features male ends with 1/4 inch OD tubing and 7/16-20 UNF-3A threads, and is designated as a critical application item intended for installation on Sikorsky CH-54A and CH-54B cargo transport helicopters. The valve must meet stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede any other specifications including ASTM D3951. Approved manufacturers include Parker Hannifin, Honeywell, Crissair, Tactair Fluid Controls, Preece Inc, and Sikorsky Aircraft Corporation, with specific part numbers listed for each. Packaging and labeling must comply with MIL-STD-129 and DLA packaging requirements, with palletization governed by RP001 and all items shipped in accordance with the unit of issue and quantity per unit pack defined in the contract. The solicitation number SPE7MC-26-T-165U includes two line items for a total of 156 units, with 17 units priced at $17.00 each and 139 units priced at $139.00 each, both under NSN 4820-00-917-5350. Delivery is required within 175 days from the contract date, with no variance allowed in quantity. Delivery is FOB origin, with inspection and acceptance occurring at the destination. Two distinct shipping destinations are identified: Cherry Point, North Carolina for the first shipment and San Diego, California for the second. The original required delivery date is June 23, 2027, with ship dates set for June 30, 2027 and February 6, 2026 respectively. All packaging must be marked per DLA standards, and the contract is governed by federal procurement regulations with the DLA as the issuing authority. The point of contact for the solicitation is Nicole Betts, and responses were due by August 14, 2026.
Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339950
New
DIBBS
PLATE, IDENTIFICATION
Solicitation # SPE8E6-26-T-3831
The contract is for the procurement of 42 identification plates with NSN 9905-01-308-2822 under solicitation SPE8E6-26-T-3831, issued by the Defense Logistics Agency for delivery to DLA Distribution Cherry Point in North Carolina. Delivery is required within 90 days after award, with an original required delivery date of July 29, 2027, and a need ship date of November 2, 2026. The item is to be delivered FOB Origin, inspected and accepted at the origin point, and packaged in accordance with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must fully comply with MIL-STD-129, and palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The contract mandates use of the Wide Area WorkFlow system for invoicing and receiving reports, and the unit of issue is each, with no variance allowed in quantity. The contract incorporates critical cybersecurity and safeguarding requirements including 252.204-7012 for safeguarding covered defense information and cyber incident reporting, along with NIST SP 800-171 DOD assessment requirements. Additional clauses address hazardous material labeling under 29 CFR 1910.1200, prohibition of hexavalent chromium, restrictions on procurement from communist Chinese military companies, and whistleblower protections. The contractor must comply with all representations in Section K including UEI and CAGE code disclosures, small business size status, and socioeconomic certifications. The contract is a simplified acquisition under FAR 52.213-4, with a firm-fixed-price type structure, and includes clauses for changes, default, inspection, and unenforceable obligations. Payment is processed electronically through WAWF, and all submissions must be made via the DIBBS portal by the August 6, 2026 deadline. No pricing data is filled in the CLIN, indicating the award will be based on offeror pricing responses. The contracting officer is Kathleen Selover, and the acquisition falls under NAICS code 339950.
Sign Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Documentation SupportThe contract titled Hazardous Materials Compliance and Documentation Support is a small business set-aside subcontract issued by the Department of Defense under NAICS code 541620, focused on providing regulatory compliance services for hazardous and radioactive materials. The work requires expert support in preparing safety data sheets, applying accurate hazard labeling, and ensuring adherence to federal and military standards governing the handling, storage, and transport of dangerous substances. Performance is to occur at Cherry Point, North Carolina, with a specific zip code of 28533-5040, and the solicitation was posted on July 29, 2026, with a response deadline of August 10, 2026. Only businesses certified as small under the SBA’s Total Small Business Set-Aside criteria are eligible to respond, emphasizing the government’s intent to prioritize small business participation in this specialized compliance effort.
Environmental Consulting Services

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Logistics Coordination for Military ShipmentThis contract mandates comprehensive packaging, labeling, and logistics coordination for valves to ensure full compliance with U.S. Department of Defense standards for military shipments, including strict adherence to hazardous material transportation regulations and mandatory barcode labeling protocols. All activities must align with DLA’s operational requirements to guarantee safe, traceable, and timely delivery of critical components across military supply chains, with particular attention to documentation, handling procedures, and regulatory compliance at every logistical stage. The opportunity is structured as a small business set-aside under the SBA program, exclusively available to certified small businesses as defined by FAR 19.5, and is classified under NAICS code 493190 for other transportation support activities. The place of performance is centered at Cherry Point, North Carolina, with all work required to be executed in alignment with federal defense logistics protocols. Responses are due by August 10, 2026, and the procurement is administered by the Department of Defense through its Cherry Point Phantom Road facility, with no specific point of contact listed in the public posting.
Other Warehousing and Storage

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 332912
New
DIBBS
Supply of Regulating Fluid Valves (P/N: 40-25-0001, NSN: 4820015645211)The contract calls for the procurement and delivery of 14 precision fluid regulating valves identified by part number 40-25-0001 and national stock number 4820015645211, manufactured to meet military specifications. All items must be properly packaged and labeled in accordance with defense standards and shipped FOB origin to distribution centers operated by the Defense Logistics Agency. The requirement is structured as a subcontract under a total small business set-aside, specifically designated for small businesses as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code 332912 applies, indicating the work falls within the manufacturing of other fabrication and related industries. Performance is tied to the location of Cherry Point with a zip code of 28533-5040, and all responses must be submitted by the deadline of August 10, 2026, following the solicitation’s release on July 29, 2026.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-158L
The contract is for the procurement of six units of a regulating fluid valve with NSN 4820-01-564-5211, issued under solicitation SPE7MC-26-T-158L, a total small business set-aside under NAICS code 332911. The item is designated as a critical application component, with strict compliance required to the DLA Master List of Technical and Quality Requirements, which override any referenced ASTM D3951 standards. Packaging and labeling must strictly follow MIL-STD-129, with palletization aligned to RP001 DLA Packaging Requirements. The contract includes two CLINs: one for six units at $6.00 each to be delivered to Cherry Point, NC, and another for eight units at $8.00 each to be delivered to Jacksonville, FL. Both deliveries are FOB origin, require 218 days for delivery, and have zero variance allowance. Inspection and acceptance occur at destination, with no tolerance for deviation in quantity. The original required delivery date is March 28, 2027, with ship dates mandated for May 26, 2027, and March 17, 2027, respectively. All packaging must meet specified QUP and U/I standards, and transportation instructions reference DLAD Proc Notes C19 and C20. The point of contact is Paula McClary, and the solicitation was posted July 29, 2026, with a response deadline of August 10, 2026.
Industrial Valve Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Logistics and FOB Origin Delivery ServicesThe contract mandates the arrangement of shipments from origin points to DLA Distribution Cherry Point, North Carolina, with strict adherence to FOB Origin terms, meaning the buyer assumes all liability and costs once goods are loaded at the origin. All deliveries must be accompanied by timely and accurate WAWF receiving reports to ensure proper documentation and payment processing. The effort falls under the NAICS code 484220, indicating a focus on truck transportation services, and is structured as a subcontract arrangement under the Department of Defense. Performance is required at Cherry Point, NC, with a specified zip code of 28533-5040, and the solicitation was posted on July 28, 2026, with responses due by August 10, 2026. The contracting activity is administered by the Cherry Point Phantom Rd Bldg office, and bidders must comply with all Federal Acquisition Regulation requirements governing logistics services for defense distribution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Commercial Component Supply (Poppet Assembly)The contract pertains to the supply of poppet assemblies and relief units identified by NSN 4810002222745, manufactured to meet rigorous military specifications and ensure full operational compatibility in defense applications. Compliance with standardized packaging and labeling requirements is mandatory to facilitate proper handling, storage, and deployment within military logistics systems. The solicitation, issued under the NAICS code 332999 for other fabricated metal product manufacturing, is structured as a subcontract and is set for delivery to a designated performance location at Cherry Point with ZIP code 28533-5040. The posting date indicates the opportunity was made available on July 28, 2026, with a response deadline set for August 10, 2026, allowing suppliers a defined window to submit offers. The contract is administered by the Department of Defense through the Cherry Point Phantom Rd Building office, with all submissions required to be made through the official DIBBS portal linked in the solicitation details.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires the identification and proper labeling of all hazardous materials used in assembly or packaging activities in strict accordance with 29 CFR 1910.1200, the Occupational Safety and Health Administration’s Hazard Communication Standard. All materials must be accurately classified, and compliant safety data sheets must be submitted to ensure transparency and safety for personnel handling these substances. Warning labels meeting federal specifications must be affixed to containers and packaging to communicate potential risks clearly. The work is governed under the NAICS code 541620 which pertains to management consulting services, indicating that the scope likely involves procedural compliance and documentation rather than physical manufacturing. Performance is required at the facility located in Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026. This is classified as a subcontract under the Department of Defense, with the performing agency referenced as CHERRY POINT PHANTOM RD BLDG.
Environmental Consulting Services

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Military Shipment Marking and Labeling ServicesThis contract requires precise application of military shipment markings and labels in full compliance with MIL-STD-129 standards, ensuring automated traceability through standardized barcoding systems including 2D DataMatrix and Code 128. All items must be uniquely identified with a Unique Item Identification (UID) and properly marked to reflect government property status, enabling seamless inventory management and logistical tracking throughout the defense supply chain. The work must be performed accurately and consistently to meet federal requirements for accountability and operational readiness. The solicitation is issued as a subcontract under NAICS code 541380, with a response deadline of August 10, 2026, and the place of performance is designated at Cherry Point, North Carolina, with a zip code of 28533-5040. The contract is managed by the Department of Defense through the organization located at Cherry Point Phantom Rd Bldg. Contractors must have the capability to implement government-mandated labeling protocols under strict quality controls, and failure to adhere to specifications could result in rejection of shipments or non-payment. All work must support secure and efficient defense logistics operations without delay or deviation from established standards.
Testing Laboratories and Services

POSTED

7 days ago

DEADLINE

in 6 days
View Details
NAICS: 311999
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires the packaging and preservation of Poppet Assembly units in full compliance with MIL-STD-2073-1E standards, encompassing detailed cleaning and drying procedures as specified by Method 33. The packaging process must incorporate Corrosion Inhibiting Paper as the primary wrap material, identified by the designation CA, to ensure protection against corrosion during storage and transportation. All units must be securely enclosed in corrugated and fiberboard containers that meet military specifications for durability and environmental resistance. The work is positioned as a subcontract under the Department of Defense, with performance location designated at Cherry Point, North Carolina, zip code 28533-5040. The NAICS code 311999 indicates the scope relates to other food manufacturing, though this appears inconsistent with the technical nature of the work, suggesting a potential classification mismatch. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and all submissions must align with the technical and procedural mandates outlined in the military standard to qualify for award.
All Other Miscellaneous Food Manufacturing

POSTED

7 days ago

DEADLINE

in 6 days
View Details