Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

48--VALVE,FUEL,DRAIN

Awarded

SPE7MC26T8847Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract award is for a 48--VALVE,FUEL,DRAIN under solicitation number SPE7MC26T8847, posted on May 5, 2026, and awarded by the DLA Land and Maritime division of the Department of Defense. The NAICS code 336310 indicates the contract falls within the Aerospace Product and Parts Manufacturing sector, specifically targeting fuel system components. The awarding office is located in Columbus, Ohio, with the primary point of contact being Natalya Radyk, reachable via email at [email hidden] or by DSN phone at [phone hidden]. There is no specified place of performance address provided, and no set-aside designation is listed, meaning the contract is open to all eligible contractors without preference for small businesses or specific categories. The full details and documentation can be accessed through the SAM.gov workspace link provided.

General Info

Procurement of fuel drain valve by Defense Logistics Agency for aerospace parts manufacturing, open to all contractors.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$54,134.6

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

TRANSAERO, INC.

Award Issued Date

05/05/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 23

Combined Synopsis

AwardedMay 5

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Natalya Radyk

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Proposed procurement for NSN 4820010820630 VALVE,FUEL,DRAIN: Line 0001 Qty 47 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0157 DAYS ADO Approved sources are 06239 M4007; 97484 P703. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

FLANGE, FUEL TANK

Solicitation # SPE7L5-27-T-0218

Solicitation SPE7L5-27-T-0218 is a fixed-price request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of 199 fuel tank flanges, identified by NSN 2910011633248. The items must be manufactured using a metal casting process requiring specific tooling and must adhere to source-controlled drawings. Blue Group LLC is noted as the authorized source in place of Cast-Rite. Delivery is required FOB Origin to DLA Distribution Barstow, California, with a need ship date of May 19, 2027, and an original required delivery date of October 31, 2027. The contract mandates strict quality and technical compliance, including a CMMC Level 2 Self-Assessment and adherence to SAE AS9003 or ISO 9001 standards. Inspection and acceptance occur at the origin, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while the use of Class I Ozone Depleting Chemicals is strictly prohibited. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous materials, and trade restrictions.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7L4-27-U-0114

Solicitation SPE7L4-27-U-0114 is an indefinite-quantity, small business set-aside contract issued by the DLA Weapons Support LSO Combat Vehicles and Armament for the procurement of fluid filter elements (NSN 2910-01-363-4376). The contract has a maximum value of 350,000.00 USD, with an estimated annual demand of 782 units and a guaranteed minimum quantity of 117 units once the contract becomes binding. Delivery is required within 168 days after receipt of the order, with shipping terms based on FOB Origin under the First Destination Transportation program. This is a restricted source item requiring engineering source approval from the government design control activity. Alternate offerors must provide extensive documentation per MIL-T-31000, including manufacturing drawings, process sheets, and shock extension reports per MIL-S-901. Quality and technical requirements are governed by the DLA Master List, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129. The award will be based on the most advantageous offer considering price and other factors. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material restrictions, and hazardous material labeling.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

VALVE, STOP-LIFT-CHECK

Solicitation # SPE7MC-27-T-1280

Solicitation SPE7MC-27-T-1280 is a fixed-price procurement for 30 units of Valve, Stop-Lift-Check (NSN 4820-01-626-3871), identified as a Navy Critical Safety Item. The contract is a HUBZone set-aside with a delivery requirement of 280 days after receipt of order, shipping FOB Destination to the DDSP New Cumberland Facility in Pennsylvania. Manufacturers must maintain a quality management system complying with SAE AS9100 or an equivalent standard. Packaging and marking must adhere to MIL-STD-129 and RP001, with specific requirements for unit package labeling including the NSN, contract number, and CAGE codes. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and provide disclosure for any non-domestic materials. The solicitation prohibits the use of additive manufacturing unless specifically authorized and requires representations regarding the non-provision of covered telecommunications equipment. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and mandatory registration through the Account Management and Provisioning System (AMPS) for Vendor Shipment Module access. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment and DFARS 252.204-7012.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2697

Solicitation SPE7L1-27-T-2697 is a small business set-aside request for the procurement of 23 O-rings (NSN 5331016647925) for the DLA Weapons Support Land Supply Chain. The items are identified as commercial products and must be delivered to the Letterkenny Army Depot in Chambersburg, Pennsylvania, within five days of the award. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination. The procurement includes strict technical and quality requirements, specifically prohibiting the use of asbestos and requiring a 60-month extendable shelf life. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Marking must comply with MIL-STD-129, utilizing special marking code 32 for shelf life. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including those regarding cybersecurity reporting, domestic sourcing restrictions, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-1404

Solicitation SPE7L1-27-T-1404 is a Request for Quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 1,331,000 O-rings (NSN 5331-15-027-4544) to support the Amphibious Combat Vehicle. This is a total small business set-aside under NAICS code 336310. A critical requirement of this procurement is that IVECO (CAGE A4249) is the only approved source for the specified part number, and no substitutions are permitted after the award. The delivery period is 161 days after order, with a need ship date of April 6, 2027, and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and material standards, specifically prohibiting the use of Class I ozone-depleting chemicals and asbestos. Contractors must provide supply chain traceability documentation and comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a specific do not bend requirement. Items must be sealed in waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent UV deterioration. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and the Berry Amendment. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-2732

Solicitation SPE7L1-27-T-2732 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of three O-rings, specifically NSN 5331-01-713-3779 and Parker-Hannifin Corporation part number 4317-2-226. The required delivery date is June 16, 2027, with a delivery window of 218 days after receipt of order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including supply chain traceability and the prohibition of class I ozone-depleting chemicals and intentionally added mercury. Due to the risk of ultraviolet deterioration for this supply classification, items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Marking must comply with MIL-STD-129, including the special marking code 20 for do not bend. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and hazardous material identification.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

FILTER BODY, FLUID

Solicitation # SPE7L1-27-T-2701

Solicitation SPE7L1-27-T-2701 is a request for quotation issued by the DLA Weapons Support Land Supply Chain for the procurement of one fluid filter body, identified by NSN 2910-99-816-4781. The requirement is for a quantity of one unit with an original required delivery date of October 26, 2026. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The item must be shipped to the W8SE MI ARNG FMS 22 facility in Midland, Michigan, using the fastest traceable means, specifically excluding parcel post. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and requires packaging and marking to comply with MIL-STD-2073-1E and MIL-STD-129. Palletization must follow RP001 standards. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS), and the award may be processed automatically. The procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

VALVE, 2 WAY OPERATION

Solicitation # SPE7MC-27-T-1290

Solicitation SPE7MC-27-T-1290 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of 29 units of a 2-way operational valve, identified by NSN 4820-01-145-6037. The required hardware features a 3/8 inch inlet, a 400 PSI rating, a temperature range of -40 to +180 degrees Fahrenheit, a bronze housing, and stainless steel and monel trim. This is designated as a critical application item and a restricted source item, requiring engineering source approval by the government design control activity. The specified part number is Griswold Industries 86184 P/N 79300A. The contract specifies a delivery window of 154 days, with a need ship date of April 13, 2027, and an original required delivery date of July 2, 2027. Shipping is FOB Origin under the First Destination Transportation program, with the delivery destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the contractor must adhere to strict prohibitions against the intentional addition of mercury or mercury-containing compounds. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the Berry Amendment. The procurement is under NAICS code 336310 and may be eligible for automated award. Offerors must maintain active registration in the System for Award Management and provide necessary representations regarding business size and telecommunications equipment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

POPPET, MANIFOLD

Solicitation # SPE7MC-27-T-1261

Solicitation SPE7MC-27-T-1261 is a request for quotations for the procurement of two manifold poppets, identified by NSN 4820012684031 and TransDigm Inc part number 707623-1. The requirement is classified as a critical application item under NAICS code 336310. Delivery is required within 147 days after order, with a need ship date of April 6, 2027. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. While the solicitation is issued under the First Destination Transportation program, offers must be submitted based on FOB Origin. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 self-assessment and the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The government will not evaluate offers utilizing additive manufacturing, and a HUBZone price evaluation preference may be applied during the award process.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

29--TANK,FUEL,PORTABLE

Solicitation # SPE7L5-27-T-0395

Solicitation SPE7L5-27-T-0395 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Engines for the procurement of eight portable fuel tanks. The items are identified by NSN 2910016490252 and part number 8001071300 from AEF-Performance LLC. This is designated as a commercial item procurement with a required delivery date of March 5, 2027, and a delivery lead time of 118 days after receipt of order. Shipping is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and ASTM D3951 for packaging, although the DLA Master List of Technical and Quality Requirements (RA001, RP001, and RQ011) takes precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Evaluation preferences are provided for HUBZone certified offerors, and the use of additive manufacturing is prohibited unless specifically authorized.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

29--FILTER,FLUID

Solicitation # SPE7L4-27-U-0104

Solicitation SPE7L4-27-U-0104 is a unilateral Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency (DLA) Weapons Support LSO Combat Vehicles and Armament for the procurement of fluid filters, identified by NSN 2910016798618 and Stauff Corp part number SE-090H20B/X. The contract has a maximum value of 350,000.00 USD, with an estimated annual quantity of 128 units, a guaranteed minimum of 19 units, and a minimum delivery order quantity of 64 units. This is a total small business set-aside procurement. The delivery requirement is 28 days after receipt of order (ADO) with FOB Origin terms, though inspection and acceptance occur at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). The contractor is prohibited from using Class I ozone-depleting chemicals and must comply with the Buy American Act and DFARS cybersecurity and reporting standards. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. Award will be made to the responsible offeror whose quote is determined to be most advantageous to the government, considering price and other factors.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

PUMP, FUEL, METERING AND

Solicitation # SPE7L1-27-T-2610

Solicitation SPE7L1-27-T-2610, issued by the DLA Weapons Support Land Supply Chain, is a request for the procurement of one fuel metering and distributing pump, identified by NSN 2910-01-610-6809. The requirement specifies a delivery lead time of five days after order, with an original required delivery date of October 23, 2026. The shipment is to be delivered FOB Origin to the 0209 CS BN CO A Distribution center at Wheeler Army Airfield, Hawaii. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 for marking and RP001 for palletization, with packaging data governed by MIL-STD-2073-1E. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and specific cybersecurity requirements such as DFARS 252.204-7012 for safeguarding covered defense information. Offerors must submit their quotes via the DIBBS portal and maintain active registration in the System for Award Management.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Supplier for Component NSN 015715718This subcontract through DLA Land and Maritime requires the manufacture or distribution of 603 units of hardware component NSN 015715718. The supplier must ensure all components meet strict government specifications, including the application of MIL-STD-129 markings and the use of standard commercial packaging. Additionally, the provider is required to submit proof of commerciality in accordance with FAR Part 12. The completed materials are to be delivered to prime contractors located in Columbus, Ohio. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 29, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 14 hours

Supplier for Component NSN 016603400This subcontract with DLA Land and Maritime requires the manufacture or distribution of 1,169 units of hardware component NSN 016603400. The supplier must ensure all components comply with government specifications and are delivered to Columbus, Ohio. The contractor is responsible for applying MIL-STD-129 markings and utilizing standard commercial packaging. Additionally, the supplier must provide proof of commerciality in accordance with FAR Part 12. This requirement falls under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 14 hours

Oshkosh Wholistic Sole Source Project

Solicitation # 75Q65

DLA Land and Maritime, specifically the Strategic Acquisitions office, is conducting market research for a potential Indefinite Delivery Indefinite Quantity (IDIQ) long term contract under solicitation 75Q65. The project focuses on the procurement of components and support for the Oshkosh MRAP-All Terrain Vehicle (M-ATV), including SOCOM variants and Mine Resistant Vehicles. Required items encompass a wide range of vehicular components, such as structural body parts, mechanical and electrical systems like wiring harnesses and fluid filters, and various specialized hardware and mounting brackets. While Oshkosh Defense is currently the only approved source, the agency is seeking additional manufacturers capable of producing these items. The procurement will be evaluated and awarded on a per NSN/CLIN basis, with specific requirements for standard commercial packaging and MIL-STD-129 markings. Interested parties must submit a Market Research Questionnaire by October 28, 2026, providing details on their business size, manufacturer status, and distribution networks. The performance location is listed as Columbus, Ohio, and the effort falls under NAICS code 332999. Estimated buy quantities have been identified for various components, though a total contract value has not yet been established.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 14 hours

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # CM26163006

DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

29--PUMP,FUEL,ELECTRICA

Solicitation # SPE7L126T103X

DLA Land And Maritime

POSTED

DEADLINE

48--VALVE,DEADMAN

Solicitation # SPE7MC26T8651

DLA Land And Maritime

POSTED

DEADLINE

28--CYLINDER HEAD,DIESE

Solicitation # N0010426QXB02

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Scrap Metal Processing and Recycling

Commanding General

POSTED

CLOSED

48--THERMOSTATIC ELEMEN

Solicitation # SPE7MC26T8378

DLA Land And Maritime

POSTED

DEADLINE

48--QUIET VENT ASSEMBLY

Solicitation # SPE7MC26Q0305

DLA Land And Maritime

POSTED

DEADLINE

Exhaust Manifold Supply for Marine Diesel Engines

Sflc Procurement Branch 3(00040)

POSTED

CLOSED

48--LOCKING DEVICE,VALV

Solicitation # SPE7MC26T9270

DLA Land And Maritime

POSTED

CLOSED

48--VALVE,SHUTTLE HYDRA

Solicitation # SPE7MC26T9184

DLA Land And Maritime

POSTED

CLOSED

Fuel Injector Nozzle Supply (Spray Tip, Nozzle, Fuel Injector)

LAND SUPPLIER OPNS ENGINES

POSTED

CLOSED

Solicitation # SPE7L1-26-T-395D

LAND SUPPLY CHAIN

POSTED

CLOSED

29--PARTS KIT,FUEL INJE

Solicitation # SPE7LX26U6247

DLA Land And Maritime

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS