Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

48--VALVE,SAFETY RELIEF, IN REPAIR/MODIFICATION OF

Awarded

N0010426CZA19Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified by solicitation number N0010426CZA19, authorizes the repair and modification of nonrenewable safety relief valves for the Department of Defense through the Navsup Weapon Systems Support Mech. The procurement is managed by the office located in Mechanicsburg, Pennsylvania, with the actual place of performance situated in South El Monte, California. Classified under NAICS code 332911, the action is processed as a justification for other than full and open competition. The acquisition is justified under 10 USC 3204A (1) and FAR 6.302-1, as the government has determined that only one responsible source can satisfy the requirement. This exception to fair opportunity is based on proprietary data rights and the critical nature of the shipboard systems involved. The justification was established on August 14, 2025, and remains signed through October 30, 2025.

General Info

Sole source contract for DoD safety relief valve repair and modification in California.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

332911 - Industrial Valve Manufacturing

Place of Performance

South El Monte, CA, USA

Set-Aside

NONE

Documents

1

NAVSUP WSS Justification for Other Than Full & Open Competition - Valve Safety Relief

justification-and-authorization

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedSep 28

Justification (J&A)

AwardedOct 20

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

The Justification and Approval (J&A) authorizes and approves an exception to fair opportunity; basis as shown in Attachment 1.

Similar Contracts

Same NAICS industry code

CF8 Stainless Steel Valve Body CastingThis 8(a) sole source subcontract with the NASA Shared Services Center involves the casting of high-pressure industrial water valve components for prime contractors. The scope of work requires the production of fourteen rough-cast stainless steel components, specifically seven 6 inch 150 lb flange valve main bodies and seven end housings. All parts must be manufactured using CF8 Stainless Steel in accordance with ASTM A351 and ISO 8062-4:2017 Grade P and S tolerances. The contractor will utilize government-furnished molds to complete the fabrication process. This project falls under NAICS code 332911 and is managed by the National Aeronautics And Space Administration.

NASA Shared Services Center

POSTED

about 10 hours ago

DEADLINE

48--VALVE,SHUTTLE

Solicitation # SPE7L027T0036

DLA Weapons Support

POSTED

about 10 hours ago

DEADLINE

Supply of Control Valve Assemblies (Part No. 250854F55AHMX1ZR)This subcontract involves the manufacture or procurement of specialized control valve assemblies, specifically part number 250854F55AHMX1ZR, for use in Cold Fresh Water Systems on HFX Class Ships. The project supports prime contractors working on Department of National Defence naval projects within Canada. To be eligible, the provider must maintain ISO 9001:2015 quality management certification and hold a valid registration with the Controlled Goods Program. The selected supplier is responsible for delivering the units DDP to CFB Halifax and CFB Esquimalt, ensuring that all shipments are accompanied by bilingual Safety Data Sheets. The contract falls under NAICS code 332911 and requires performance across British Columbia and Nova Scotia. Interested parties must respond by November 4, 2026.

Department of National Defence

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Positive Crankcase Ventilation (PCV) ValvesThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, involves the manufacturing of 1,345 Positive Crankcase Ventilation valves for prime contractors. The project requires fabrication according to source-controlled drawings for NSN 2990-01-147-9284 and the use of specialized tooling to ensure all specifications are met. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332911. Quality assurance is a critical component of the contract, requiring the execution of First Article Tests for ESA approval and the implementation of zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. This opportunity is designated as a Total Small Business Set-Aside per FAR 19.5, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Check Valve (NSN 4820016692015)This subcontract involves the supply of check valves, specifically NSN 4820016692015, for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires strict adherence to military standards, including Item Unique Identification per MIL-STD-130 and marking requirements per MIL-STD-129. Additionally, the provider must ensure all items are packaged and palletized according to RP001 and FAA regulations, with quality assurance performed under MIL-STD-1916 or ASQ H1331. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Deliverables must include the marked and packaged valves accompanied by full supply chain traceability documentation. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026, falling under NAICS code 332911.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Safety Relief Valves (NSN 4820013318674)This subcontract involves the procurement or manufacture of two safety relief valves identified by NSN 4820013318674 for the Defense Logistics Agency Weapons Support Active Devices Division. The contractor is responsible for ensuring all units meet strict DLA technical specifications and are packaged according to RP001 standards. Delivery will be coordinated through the First Destination Transportation program, with the place of performance located in San Diego, California. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332911. Interested parties must submit their responses by October 30, 2026. This contract supports prime contractors in delivering essential safety components to the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Centrifugal Valve (NSN 2520011106617)This subcontract involves the supply of one Centrifugal Valve, part number 23010017 and NSN 2520011106617, for prime contractors supporting DLA supply contracts. The item must meet Critical Application Item standards and adhere to strict logistics requirements, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. The performance of this contract will take place in Albany. The agreement mandates strict compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding cybersecurity safeguarding. Managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 332911. The response deadline for this requirement is October 30, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Main Ballast Valve SupplierThis subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the procurement and delivery of one Main Ballast Valve, identified by NSN 4820-01-214-6097. The selected supplier is responsible for delivering the valve to the designated government facility in New Cumberland, Pennsylvania, ensuring full compliance with RP001 DLA Packaging Requirements for Procurement. Additionally, the contractor must disclose any usage of non-domestic materials as part of the delivery process. The opportunity was posted on October 19, 2026, with a response deadline of October 30, 2026. Falling under NAICS code 332911, this contract is intended for prime contractors supporting DLA supply chains. The scope of work is limited to the procurement, packaging, and final delivery of the completed valve to the specified location.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Ball Valves (NSN 4820017274413)This subcontract involves the manufacture or sourcing of six palletized ball valve units identified by NSN 4820017274413 for prime contractors under DLA supply contracts. The work is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland. All provided valves must strictly comply with prohibitions against Class I Ozone Depleting Chemicals. Contractors are required to package and palletize all items according to RP001 DLA Packaging Requirements for Procurement. To be eligible, providers must maintain active registration in SAM.gov and possess Wide Area Workflow capability. The response deadline for this requirement is October 30, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Pressure Equalizing Valves (NSN 4820-01-266-3367)This subcontract involves the supply of pressure equalizing valves, identified by NSN 4820-01-266-3367, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The scope of work requires the manufacturer to source or produce valves based on technical data from the DLA portal, utilizing either precision machining or approved Additive Manufacturing in accordance with L31 standards. The contractor must ensure strict adherence to MIL-STD-129 for all marking and labeling requirements and comply with Federal Standard No. 313 regarding hazardous materials. Performance will take place in Corpus Christi, Texas, with the final deliverable being one completed and labeled pressure equalizing valve.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Angle Needle Valves (NSN 4920-01-583-0127)This subcontract involves the supply of angle needle valves meeting NSN 4920-01-583-0127 specifications for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work includes the manufacturing or sourcing of these valves, with the option to utilize approved additive manufacturing processes. All deliverables must be marked and labeled according to MIL-STD-129 and palletized per RP001 standards for delivery to Tracy, California. Compliance requirements are stringent, necessitating a CMMC Level 2 self-assessment and adherence to DFARS safeguarding regulations. The contract falls under NAICS code 332911 and was posted on October 19, 2026, with a response deadline of October 27, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Valve Body Component SupplierThis subcontract, managed by the DLA Weapons Support Aviation Supply Chain under the Department of Defense, requires the manufacture or procurement of valve body components for prime contractors. The supplier must ensure all components meet the specific technical data specifications for NSN 4820013586168 and adhere to the DLA Master List of Technical and Quality Requirements. A Manufacturer's Inspection System must be utilized to maintain quality standards, and all deliverables must comply with domestic origin requirements per DFARS 252.225-7001. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties should note that the response deadline is October 27, 2026, and the work falls under NAICS code 332911. The primary objective is the successful delivery of physical valve body components that meet all stated military and technical specifications.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Request for Information: Additive Manufacturing

Solicitation # N0010427RZ058

The Naval Supply Systems Command Weapon Systems Support is conducting market research through Request for Information N0010427RZ058 to identify qualified sources capable of designing, producing, and delivering piece part components or entire assemblies using additive manufacturing methods. The government is specifically interested in vendors who can meet rigorous manufacturing, material, performance, testing, and quality assurance requirements. While the current focus is on a candidate list of National Item Identification Numbers for valves, actuators, and manifolds, the government anticipates that Level I and SUBSAFE items may become eligible for additive manufacturing in the future. Interested businesses must provide detailed administrative data, descriptions of their manufacturing capabilities, facility certifications such as ISO 9001 or AS9100, and evidence of past performance with similar military or commercial hardware. Additionally, the government is soliciting industry feedback on the development of objective evaluation criteria and the structuring of performance-based incentives for future Firm-Fixed-Price contracts. All produced components must be fully interchangeable with traditionally manufactured equivalents and strictly adhere to the baselines established in Project Peculiar Document 802-8436658. Responses are due by October 22, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

59--DISPLAY,OPTOELECTRO, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QUA15

POSTED

about 10 hours ago

DEADLINE

in about 1 month

58--FAIRLEAD COVER

Solicitation # N0010427QUA14

POSTED

about 10 hours ago

DEADLINE

in about 1 month

PANEL,SONAR GTC

Solicitation # N0010426QYAD5

Solicitation N0010426QYAD5 is a total small business set-aside issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture of one Sonar GTC Panel (NSN 5845-01-593-8990). The requirement is processed under Emergency Acquisition Flexibilities and carries a DPAS priority rating of DO. The successful offeror must adhere to strict technical specifications, including ISO 9001 quality system standards, MIL-STD-129 marking, and MIL-STD-2073 packaging. Due to the item's use on submarines and surface ships, the contractor must certify that all materials are mercury-free and maintain the necessary government security clearances as specified in DD Form 254. The government will make a single award based on the most advantageous offer, with past performance serving as the primary evaluation factor and price as the secondary factor. Delivery is required within 180 days, FOB Destination, to the DLA Distribution New Cumberland facility. The contract includes a one-year warranty from the date of delivery and requires the use of the Wide Area Workflow system for invoicing and payment. Additionally, the government retains an option to increase the order quantity up to a specified percentage within 180 days of the award without re-soliciting.

Other Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

43--FILTER ELEMENT,FLUI

Solicitation # N0010427RBA90

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Supply of Torlon Polyamide-Imide Valve SeatsThis subcontract involves the supply of mating seats for a 21-inch ball valve intended for prime contractors working on NAVSUP Weapon Systems Support Mechanicsburg projects. The required components must be sourced or manufactured from Torlon 4503, 4203, or 4203L unfilled polyamide-imide, strictly adhering to Electric Boat Specification 4147 and NAVSEA Drawing 7284884. The selected provider must maintain a quality manual compliant with ISO 9001 or MIL-I-45208 standards. The final delivery consists of two Torlon mating seats accompanied by a Certificate of Compliance. Responses for this opportunity are due by November 16, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Precision Manufacture of Stainless Steel Ball for Valve KitThis subcontract involves the precision manufacture of a high-precision ball for a 21-inch ball valve intended for prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. The fabrication process requires the use of SAE-AMS-QQ-S-763 Class 304, Condition A stainless steel, with mandatory intergranular corrosion tests and non-destructive testing on all welds. The final deliverable consists of one precision-machined ball accompanied by a comprehensive certification package. To qualify, the contractor must maintain a quality manual compliant with ISO 9001 or MIL-I-45208 standards. This opportunity falls under NAICS code 332710 and is associated with the Department of Defense. Interested parties must submit their responses by the deadline of November 16, 2026.

POSTED

DEADLINE

Manufacture and Supply of Variable Resistors (NIIN 016331367)This subcontract involves the manufacture and supply of variable resistors meeting NIIN 016331367 specifications for prime contractors supporting Department of the Navy projects. The scope of work requires the production of components that include Unique Item Identifiers in accordance with DFARS 252.211-7003 and packaging that adheres to NAVSUP PUB505/AFMAN24-204 standards. Final deliverables must include the physical resistors with proper UID markings and SDS/GHS labeling. The contract is managed under NAICS code 334413 for the Navsup Weapon Systems Support Mech within the Department of Defense. Strict regulatory compliance is mandatory, specifically requiring CMMC unique identifiers and adherence to DFARS 252.204-7012. The solicitation was posted on October 19, 2026, with a response deadline of November 16, 2026.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Centrifugal Pump Replacement Parts SupplyThis subcontract, titled Centrifugal Pump Replacement Parts Supply, involves the procurement of internal components, seals, impellers, and gaskets to support Department of the Navy pump repair projects. The selected provider will be responsible for manufacturing or sourcing replacement parts specifically for NIIN O04511273 and NIIN 014465997, utilizing high-grade alloys to ensure all items meet strict OEM or government specifications. All new or refurbished components must be delivered directly to the designated repair facility. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the opportunity falls under NAICS code 333911. The solicitation was posted on October 19, 2026, with a response deadline set for November 16, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Centrifugal Pump Unit Repair and OverhaulThis subcontract, titled Centrifugal Pump Unit Repair and Overhaul, involves the repair and restoration of centrifugal pump units for prime contractors working on Department of the Navy projects. The scope of work includes the disassembly and inspection of units NIIN O04511273 and NIIN 014465997 to ensure compliance with CAGE 10941 and Ref No. AB294-0561-00 specifications. The process requires the use of precision machining and specialized testing rigs to verify flow and pressure, concluding with the application of DLR labeling and UID markings before final delivery. Managed by the Navsup Weapon Systems Support Mech under the Department of Defense, the project falls under NAICS code 811191. The solicitation was posted on October 19, 2026, with a response deadline set for November 16, 2026. The primary objective is to provide fully repaired and tested centrifugal pump units that meet all rigorous military and technical standards.

Automotive Oil Change and Lubrication Shops

POSTED

DEADLINE

Hazardous Material Compliance and Labeling ServicesThis subcontract for Hazardous Material Compliance and Labeling Services supports prime contractors on US Navy NAVSUP WSS Mechanicsburg pump repair projects. The scope of work involves the supply and labeling of hazardous cleaning agents, sealants, and lubricants. The contractor is responsible for identifying all materials in accordance with FED STD 313 and OSHA 29 CFR 1910.1200, providing necessary Safety Data Sheets, and ensuring all labels are GHS compliant. Additionally, the contractor must prepare all materials for military air shipment following NAVSUP PUB 505 and AFMAN 24-204 guidelines. The final deliverables include the GHS-labeled materials and all corresponding SDS documentation. This opportunity is categorized under NAICS code 541620 and is associated with the Department of Defense.

Environmental Consulting Services

POSTED

DEADLINE

Precision Ball and Roller Bearing SupplyThis subcontract involves the supply of high-precision ball and roller bearings, including races, retainers, and elements, to support pump rebuild projects for prime contractors working with the Department of Defense agency Navsup Weapon Systems Support Mech. The scope of work requires the delivery of certified precision components directly to the designated repair facility under NAICS code 332510. Strict adherence to federal regulations is mandatory, specifically regarding DFARS 252.225-7016 restrictions and DFARS 252.225-7002 Qualifying Country Sources requirements. The solicitation was posted on October 19, 2026, with a response deadline set for November 16, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS