Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

48--VALVE,VENT, IN REPAIR/MODIFICATION OF

Active
N0010426RYAC2Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NAVSUP Weapon Systems Support Mechanicsburg intends to solicit a sole source contract with Vacco Industries for the repair of three vent valves, part number V1E10502-01, under NSN 7H-4820-014836369. The items are for the atmosphere control system of an aircraft and will be delivered to DLA Distribution Norfolk, Virginia. Vacco Industries is identified as the Original Equipment Manufacturer and the only known source capable of providing the necessary spares support, as the government does not own the required technical data. This emergency acquisition is governed by FAR Part 15 and 10 U.S.C. 2304(c)(1), with a contract duration of one year and the possibility of additional options. The solicitation is expected to be issued around August 28, 2026, with a closing date of September 28, 2026, and an anticipated award date of November 30, 2026. While the government intends to negotiate with a single source, all responsible sources may submit capability statements or proposals for consideration.

General Info

Sole source contract with Vacco Industries for repairing three aircraft vent valves.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 7H-4820-014836369, TDP VER 001, QTY 3 EA, DELIVER TO SW3117, DLA DISTRIBUTION NORFOLK VA, NORFOLK, VA 23511-0001, INDUCTION NIIN IS 7H, 4820, 014836369, VALVE,VENT, V1E10502-01. NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg intends to solicit on a sole source basis with VACCO INDUSTRIES. CAGE: 99517 for the Repair of Items Below: NOMENCLATURE NIIN PART NUMBER AIRCRAFT VALVE,VENT 014836369 V1E10502-01 SUB ATMOSPHERE CONTROL There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing spares support of the above spares part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate with Only OneResponsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 332911 PSC: 4820 Contract Duration will be 1 year. posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This NIIN is an emergency acquisition NIIN. This order will be issued pursuant to Emergency Acquisition Authority. Options will be added. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 28 AUG 2026 with an approximate response/closing date of 28 SEP 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 30 NOV 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Jessica Grzywna, jessica.t.grzywna.civ@us.navy.mil.

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
Federal
LLA CHECK VALVES
Solicitation # W912EF26QA083
The U.S. Army Engineer District Walla Walla is soliciting firm-fixed-price quotes for two new 18-inch Carbon Steel Globe Body Silent Check Valves to be delivered to Lower Granite Dam, under solicitation number W912EF26QA083. This is a total small business set-aside with a NAICS code of 332911, and only new equipment is acceptable—remanufactured, refurbished, or gray market items are prohibited. The valves must be engineered to prevent flow reversal, surge, and water hammer while meeting all applicable ASTM standards, including a cast carbon steel body (ASTM A216 Grade WCB), 316 stainless steel trim and disc (ASTM A351 Grade CF8M), a 302 stainless steel spring (ASTM A276), and stainless steel guide pins and bushings. Operational specifications require a minimum pressure and temperature rating of 285 PSI at 100°F, ANSI Class 150 integrally cast flanged ends with a 16-hole bolt pattern, a flow capacity of at least 110% of the pipe size, a cracking pressure of less than 1 PSI, and top-and-bottom guided disc alignment to accommodate multi-angle installations. The valves must also include a metal-to-metal hand-lapped drop-tight seal and a permanently affixed, corrosion-resistant stainless steel nameplate listing the manufacturer, model, size, rating, and manufacturing date. Physical dimensions are strictly defined with no tolerance allowed: face-to-face measurement must be exactly 22.5 inches, overall diameter must not exceed 31 inches, and total weight must not exceed 1,300 lbs. Flanges must conform to ASTM A105 and ASME B16.5 standards with a 25-inch outside diameter, 22.75-inch bolt circle diameter, and 16-hole configuration. Quotes must be submitted by the deadline of August 14, 2026, and deliveries are to be made to a location in Washington with a zip code of 99347. Primary point of contact is Gregory Moyer, reachable via email at Gregory.Moyer@usace.army.mil or phone at 509-527-7207, with Kristin Hyde as the secondary contact. The solicitation was posted on July 27, 2026, and
US Army Engineer District Walla Wal

POSTED

about 9 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 333998
New
Federal
36--CANISTER
Solicitation # N0010426QFG27
This contract pertains to the procurement of a specialized CANISTER designed for use in a critical shipboard system, where any failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The item is classified as SPECIAL EMPHASIS MATERIAL (Level I) and is subject to stringent quality control, traceability, and inspection protocols under the Deep Submergence Systems Program. The contractor must comply with ISO-9001 or equivalent quality systems, maintain traceability from raw material to finished product using MIL-STD-792-compliant markings, and ensure 100% inspection of all Objective Quality Evidence and certification documents. All materials must conform to NAVSEA SS521-AM-MMA-010 Chapter 7, Navy part number 3.80.1018-3, and meet strict toxicity and flammability standards per NAVSEA SS800-AG-MAN-010/P-9290. Mercury and mercury-containing compounds are prohibited, and configuration control is strictly enforced through Engineering Change Proposals for any modifications affecting form, fit, function, or interface. The contract mandates zero-defect acceptance criteria for lot inspections, with sampling governed by ANSI/ASQ Z1.4 or full lot inspection for small batches. All compliance documentation, including Certificates of Compliance, must be submitted electronically via Wide Area Work Flow prior to delivery and must contain precise traceability to individual units, NSNs, and material certifications with no disclaimers or ambiguities. Certification data must be reviewed and accepted by Portsmouth Naval Shipyard six working days before final delivery, which is due within 210 days of contract award. Subcontractors are bound by the same quality requirements and must be notified of required Government inspections. The contractor must provide records of all inspections, calibrations, and nonconformances, and any waivers or deviations require prior written approval from the Contracting Officer with classification as Critical, Major, or Minor. Government Source Inspection by DCMA is mandatory at the contractor’s facility, and all packaging must conform to MIL-STD-2073. The contract further enforces Buy American provisions, Small Business Set-Aside status, and strict security restrictions in accordance with recent DOD deviations. All documentation submissions, including waiver requests and quality system procedures, must be processed via the Electronic Contractor Data Submission system, requiring PKI/CAC authentication. Final shipment is prohibited until formal acceptance is granted through WAWF with designated inspection and
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details