This Government Contract opportunity from Department Of Defense was posted on May 4, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

48--Valves, Powered

Awarded

SPRRA116R0107Federal

Submission Closed05/04/2017, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-27-T-1822

Solicitation SPE7M1-27-T-1822 is a small business set-aside request for the procurement of one bypass valve hand, identified by NSN 4820015957205. The requirement is issued by the DLA Weapons Support Maritime Supply Chain with a required delivery date of November 3, 2026, and a delivery window of five days after award. This is a restricted source item requiring engineering source approval from the government design control activity, with approved sources including Control Solutions LLC and AMZ Alabama Inc. Delivery is specified as FOB Origin, with the shipping and parcel destination located at the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must follow DLA packaging requirements under RP001. Inspection and acceptance will occur at the point of origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Compliance with various FAR and DFARS clauses is required, including those regarding the Buy American Act, cybersecurity incident reporting, and the prohibition of Class I ozone-depleting chemicals. Offerors must be registered in the System for Award Management and may be subject to the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A7-26-Q-0400

Solicitation SPE4A7-26-Q-0400 is a small business set-aside request for quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Division for the procurement of five units of Filter, Coupler, identified by NSN 5865-01-227-0352. The required materials must be new and unused, with a delivery schedule of 327 days after order. Inspection and acceptance are both designated at the origin. The government will determine the best value based on a comparative assessment of price and non-price factors, with past performance, specifically SPRS assessments and historical quality and delivery compliance, weighted more heavily than quoted delivery. This procurement involves significant security and regulatory requirements, including the handling of export-controlled technical data subject to ITAR or EAR and the use of a classified drawing that will be provided upon award following the receipt of a completed DD Form 254. Contractors must comply with DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling, while packaging must adhere to ASTM D3951. Invoicing and payment are processed electronically through the Wide Area WorkFlow system. Proposals must be submitted via the DLA Internet Bid Board System by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7M5-27-T-1136

Solicitation SPE7M5-27-T-1136 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 21 pressure switches (NSN 5930010403448). This requirement is designated as a critical application item and is a total small business set-aside under NAICS 332919. Approved sources include ITT Aerospace Controls LLC and Cooper Interconnect, Inc. The need ship date is October 20, 2026, with an original required delivery date of January 21, 2027. Delivery is specified as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Because existing source data is insufficient to fully define performance requirements, potential sources must develop and submit a complete data package including a proposed test plan based on industry, MIL-SPEC, or government standards. Failure to provide this package will result in a technically nonresponsive offer. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-129 marking. Additionally, the hardware must not contain intentionally added mercury unless functionally required per NAVSEA 5100-003D. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

SLEEVE, FLARED, TUBE FIT

Solicitation # SPE7M3-27-T-0781

Solicitation SPE7M3-27-T-0781, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of 225 flared tube fitting sleeves, identified by NSN 4730-01-582-5387 and part number CBS-12-2-N-16F from Fatigue Technology, Inc. This commercial item procurement is assigned NAICS code 332919. The required delivery date and need ship date are both set for January 24, 2027, with a delivery period of 75 days. Shipping is FOB Origin, and the destination for both inspection and acceptance is DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements (specifically RA001 and RP001) taking precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Key regulatory clauses are incorporated, including FAR 52.246-2 for destination inspection and various DFARS clauses regarding the Buy American Act, cybersecurity reporting (DFARS 252.204-7012), and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M3-27-T-0499

Solicitation SPE7M3-27-T-0499, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for 24 units of straight pipe-to-tube adapters, identified by NSN 4730-01-543-9949. This is a critical application item that must be produced by an accredited manufacturer or distributor listed on the Performance Review Institute Qualified Manufacturer List or Qualified Products List. The procurement is categorized under NAICS 332919 and requires adherence to technical standards SAE AS4223B Revision B and SAE AS85421 Revision C. Delivery is required within 158 days after order, with shipping terms set as FOB Origin and destination inspection and acceptance. The contract mandates strict compliance with DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and prohibits the use of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. All quotations must be submitted via the DIBBS portal, with a requirement to disclose any non-domestic materials used in the product.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

COUPLING HALF, QUICK DI

Solicitation # SPE7M3-27-T-0511

Solicitation SPE7M3-27-T-0511 is a fixed-price request for quotations issued by the DLA Weapons Support Fluid Handling Division for one quick disconnect coupling half, identified by NSN 4730015384235 and part number 803-8214609. The item must be delivered FOB Origin to the USS SHOUP DDG 86 within 20 days after order, with an original required delivery date of October 15, 2026. Inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and specific prohibitions against the intentional use of mercury or Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system. This procurement is open to full and open competition, with a price evaluation preference available for certified HUBZone Small Business Concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M3-27-T-0769

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of one quick coupling half, identified by NSN 4730-01-579-8245. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of May 31, 2024. The item is to be delivered FOB Origin to the Armament Inspectorate in Warszawa, Poland. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, specifically prohibiting the use of additive manufacturing unless authorized and restricting the intentional addition of mercury or mercury-containing compounds. Compliance requirements are extensive, including CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Inspection and acceptance are both set at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Balance of Payments Program for quotes exceeding the micro-purchase threshold. The solicitation is open to full and open competition, with specific price evaluation preferences noted for HUBZone small business concerns.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010424QBM87

This solicitation, number N00104-24-Q-BM87, is issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, PA, for the procurement of one Valve Stem, TTV (NIIN: 016320195). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and risk assessments from the Supplier Performance Risk System. The procurement is a DO rated order for national defense and emergency preparedness, and it requires adherence to the Buy American and Balance of Payments Program. The contractor must comply with strict technical and quality standards, including the Individual Repair Part Ordering Data (IRPOD) and higher-level quality requirements under MIL-I-45208. Packaging must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification per MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. The response deadline for quotes is November 30, 2026, and submissions are accepted via email or NECO.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QFE70

This procurement is a Request for Quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the acquisition of seven globe valves, identified as National Stock Number 4820-01-211-8826. These components are designated as Critical Safety Items and Special Emphasis material Level I, meaning they are used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this designation, the contract mandates rigorous quality assurance, including strict material traceability, quantitative chemical and mechanical analysis for specific parts, and the submission of a comprehensive certificate of compliance. The contract requires final delivery within 365 days on an FOB Destination basis. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Technical requirements include adherence to specific Swagelok process drawings and various ASTM and MIL standards, with a particular emphasis on pressure testing and thread inspection. All payment requests and receiving reports must be processed through Wide Area Workflow, and the contractor must maintain a validated Quality Control Manual to be eligible for award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

47--CONNECTION,FLEXIBLE

Solicitation # N0010426QYAGN

Solicitation N0010426QYAGN, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotations for the manufacture and delivery of flexible connections (NSN 4730-01-144-5975). The required items must conform to the design represented by Cage Code 18444, reference number 299941-100. A critical technical requirement is that all materials must be mercury-free, as they are intended for use on submarines and surface ships. The government retains an option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt at the same price. The closing date for the receipt of offers has been extended via multiple amendments to December 14, 2026, at 4:30 PM local time. The resulting award will be a bilateral agreement requiring written acceptance from the contractor. Offerors who are not the Original Equipment Manufacturer must provide the OEM's company name, CAGE code, and a signed letter of authorization. Evaluation of quotations will be based on supplier performance risk via the Supplier Performance Risk System (SPRS) and compliance with Buy American and Trade Agreements policies. Quality assurance requires inspection and acceptance at the origin, with mandatory physical identification per MIL-STD-130 and packaging according to MIL-STD-2073. Invoicing and payment must be processed electronically through the Wide Area Workflow (WAWF) system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QNE98

NAVSUP Weapon Systems Support Mechanicsburg is soliciting quotations for a fixed-price contract to procure 175 ball valve parts kits (NSN 4820-01-425-4163). The kits consist of one ball and two mating seats for a 3/4 inch ball valve, used in crucial shipboard systems. Due to the high risk associated with material failure, these items are designated as Special Emphasis Level I material, requiring strict quality assurance, higher-level inspection, and comprehensive certification. Technical requirements include specific material standards such as SAE-AMS-6931 for the ball and MD71-GG Mearthane for the seats, along with mandatory hydrostatic or dye penetrant testing and a one-year warranty from the date of delivery. The government will make a single award based on the most advantageous offer, with past performance weighted more heavily than price. Award eligibility requires the submission of an acceptable Quality Assurance Manual. All deliverables must be processed through the Wide Area Workflow system, with certification data submitted to Portsmouth Naval Shipyard for review prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. This procurement is DO certified for national defense under the Defense Priorities and Allocations System and is not a small business-small purchase set-aside.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM127QKA47

Solicitation SPRMM1-27-Q-KA47, issued by the Defense Logistics Agency Weapons Support Mechanicsburg, is a request for quotation for the manufacture and delivery of one DELTA-P IND ASSY (NSN 4820-01-664-2911). The item must be produced according to the design represented by Cage Code 99517, reference number 12052305-005, and must be strictly mercury-free for use on submarines and surface ships. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations utilizing the Supplier Performance Risk System to assess item, price, and supplier risk. The contractor is responsible for all inspection and acceptance at the source, and must maintain inspection records for 365 days following final delivery. Packaging must adhere to MIL-STD-2073-1 for stock shipments or ASTM D3951-18 for immediate use, with physical identification complying with MIL-STD-130. Invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors are required to identify the Original Equipment Manufacturer and provide quantity price breaks. Additionally, the contract mandates CMMC Level 1 self-certification and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic preferences, and labor standards.

SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Defense → Al DLA Aviation At Huntsville

Contract Value

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

Set-Aside

NONE

Awardee

HONEYWELL INTERNATIONAL INC.

Award Issued Date

05/04/2017, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 4

Award Notice

AwardedMay 4

Contract was awarded

Submission Closed

05/04/2017, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

ContactsNo contacts available

OfficeREDSTONE ARSENAL, AL, 35898-7340, USA

Organization / AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

Office AddressREDSTONE ARSENAL, AL, 35898-7340, USA

ContactsNo contact information available

Full Description

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUEST FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources, and if future efforts can be competitive or Set Aside for Small Business. The proposed North American Industry Classification Systems (NAICS) Code is 332919 which has a corresponding Size Standard of 500 employees. This SSS is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for the acquisition of a Valve, Solenoid, NSN: 4810-01-102-2473, Part Number: 70306-02107-104 in support of the UH-60 Blackhawk UH-60 Blackhawk weapon system. The Government does not have adequate data, lacks rights to data, or both needed to purchase this part from additional sources. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR)(6.302-1(a)(1) having only a limited number of responsible source. The Government is interested in all businesses to include 8(a), small business and small disadvantaged business, Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns. All contractors must meet prequalification requirements in order to be registered as a potential source. Firms that possess the ability and can produce the required item(s) described above are encouraged to identify themselves. Contractors are encouraged to seek source approval in order to compete for future solicitations by accessing the website: http://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsar then click on AMCOM Spare Parts Manufacturer or Distributor SAR The contractor shall be capable of successfully performing and complying with any and all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at time of a contract award. The contractor will be responsible for recurring and nonrecurring engineering services associated with becoming a qualified source. The contractor will also be responsible for all aspects of the manufacturing/production process, including but not limited to: supply chain management, logistics, forecasting of parts, long-lead parts procurement, material forecasting, obsolescence issues and final delivery of assets as well as any and all additional costs incurred resulting from contract performance. DISCLAIMER: THIS SSS IS ISSUED SOLELY FOR INFORMATIONAL AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE A SOLICITATION (REQUEST FOR PROPOSAL OR REQUEST FOR QUOTATION) OR A PROMISE TO ISSUE A SOLICITATION IN THE FUTURE AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.