Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FIXTURE, AIRCRAFT MA

Active
SPE4A5-26-T-328YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two aircraft maintenance fixtures, identified by part number CAT5758-13 and NSN 4920-21-920-1394, under solicitation SPE4A5-26-T-328Y, issued as a total small business set-aside. Delivery is required within 20 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is not subject to shelf life limitations, and unit identification is not required per customer request, though packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes. The supplier must follow DLA packaging requirements and avoid parcel post, shipping instead by traceable freight to the designated military facility in Belle Chasse, Louisiana. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with zero non-conformances accepted unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates technical and quality requirements from the DLA Master List and mandates CMMC Level 2 self-assessment compliance. The purchase request number is 7017659130, with a required delivery date of July 27, 2026, and the contract was solicited on August 4, 2026, with responses due by August 12, 2026.

General Info

Small business set-aside for two aircraft maintenance fixtures via SAM.gov, delivery to COMNAVRESFOR in 20 days.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

NAVAL AIR STATION, NEW ORLEANS, LA, 70143-5000, US

Set-Aside

SBA

Documents

(1)

SPE4A5-26-T-328Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FIXTURE,AIRCRAFT MA
FIXTURE,AIRCRAFT MA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
INCLUDE RD002 OBJECT TEXT ID
SAFRAN LANDING SYSTEMS CANADA INC 35962 P/N CAT5758-13
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
SPE4A5-26-T-328Y
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017659130 0001 EA 2.000
NSN/MATERIAL:4920219201394
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:01
WRAP MAT:GB CUSH/DUNN MAT:LK CUSH/DUNN THKNESS:0
UNIT CONT:MV OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N44490
FRC MA DET NEW ORLEANS
NAVAL AIR STATION
NEW ORLEANS LA 70143-5000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N44490
AIRCRAFT INTERMEDIATE MAINTENANCE
DEPARTMENT
400 RUSSELL AVE BLDG 558
BELLE CHASSE LA 70037
US
M/F: (TCN) N000726203CR93
RDD: 236
PROJ: AKO TP 3
SUPP ADD: N44490 SIG: J
SPE4A5-26-T-328Y
SECTION B
PR: 7017659130 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 15
DIC: A4A DIST: 9B ADV: FC: KB
Need Ship Date:00/00/0000 Original Required Delivery Date:07/27/2026
SPE4A5-26-T-328Y NSN/Part Number: 4920-21-920-1394 Quantity: 2 EA Purchase Request: 7017659130QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332710
New
DIBBS
ADAPTER, LUBRICATION
Solicitation # SPE4A6-26-T-11SU
The contract pertains to the procurement of an ADAPTER, LUBRICATION with NSN 4920-00-972-6030 and part number 128GT10056, under solicitation SPE4A6-26-T-11SU, issued as a total small business set-aside under NAICS code 332710. A total of 63 units are required at a unit price of $63.00, with delivery mandated within 191 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin. Inspection and acceptance occur at the destination, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and must be packaged in accordance with MIL-STD-129 and RP001 packaging guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are held to the strictest verification levels. Item Unique Identification is not required per the Service customer’s directive. Packaging must include proper markings and labeling, and palletization must meet DLA-specific requirements. The delivery deadline is set for February 20, 2027, with an original required delivery date of September 8, 2029. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, and the point of contact for inquiries is Amanda Thomas.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
C-FRAME, RECEIVER
Solicitation # SPE4A5-26-T-325U
C-FRAME, RECEIVER, identified by NSN 4920-01-625-1830 and part number RKD4101-8R, is a one-time procurement of six units under solicitation SPE4A5-26-T-325U, awarded to REXNORD INDUSTRIES, LLC. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which override all other specifications including ASTM D3951 packaging standards. All items must be marked and labeled per MIL-STD-129 and packaged in accordance with DLA Packaging Requirements for Procurement (RP001) and palletized as specified. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise defined; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unit Identification is not required under DFARS 252.211-7003(c)(1)(i). The material has no shelf life constraint and must be delivered FOB origin within 171 days, with a required ship date of January 31, 2027. Delivery is directed to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with inspection and acceptance occurring at destination. The quantity is fixed at six units with zero variance tolerance. Pricing is based on a unit price for each EA, totaling the full contract value per the CLIN structure. Transportation details are governed by DLAD Proc Note C19 for main shipment and C20 for first destination. Packaging must align with the specified QUP of 001 and be labeled using the DoD authorized unit of issue, with cross-reference to ANSI X12 available via the DLA link provided. All technical, quality, and packaging requirements take precedence over any conflicting commercial standards, and non-conforming items must be stripped of Government identification prior to return. The solicitation was posted on August 4, 2026, with responses due August 12, 2026, under NAICS code 332710, and is managed
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
INDICATOR ASSEMBLY,
Solicitation # SPE4A5-26-T-325D
The contract pertains to the procurement of an indicator assembly with NSN 4920-01-558-5930 and part number 040489-148 from HYDRAULICS INTERNATIONAL, INC., for a quantity of 14 units. The items must be delivered FOB origin within 171 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, incorporating proper identification and labeling, while palletization follows RP001 specifications. Sampling and acceptance procedures require zero non-conformances under MIL-STD-1916 or comparable zero-based plans, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. The item lacks an approved technical data package, rendering the specification proprietary or insufficient for competitive bidding. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with the original required delivery date set for April 2, 2027, and a need ship date of January 31, 2027. The solicitation was issued under contract number SPE4A5-26-T-325D with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-Q-1270
The contract pertains to the procurement of a bushing sleeve with part number NAS72-8E015 and NSN 3120-01-241-5156, designated as a critical application item requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, including specific references RQ001, RQ009, RQ017, RT001, and RQ011. Manufacturing may involve casting or forging, and since the government may not possess the necessary tooling, suppliers are directed to submit a Casting and Forging Assistance Request for sourcing support. The item must be produced in accordance with Technical Data Package Rev A Gen 2 compliant with NAS72 Revision 8 dated 10/31/2024 and QAP-13873 Revision B dated 12/11/2013. All packaging must conform to ASTM D3951 and MIL-STD-129, with palletization governed by RP001, and the DLA Master List requirements supersede any conflicting standards. The contract specifies a Firm Fixed Price with no variance allowed in quantity, requiring delivery of one unit within 180 days after award. Inspection and acceptance occur at origin, and shipment must be sent via the fastest traceable means, explicitly excluding parcel post. The delivery address is designated as ASD Jacksonville Supply Department, Building 111, Door 24, with a separate parcel post address provided solely for administrative use. The unit of issue is each, and pricing terms are firm, with the contract identified under solicitation SPE4A6-26-Q-1270. The government’s material need date is July 22, 2026, and the primary point of contact is Brea White at DLA, with full procurement details accessible through the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
Federal
LOAD CELL,AIRCRAFT,
Solicitation # N0038326QPC24
This contract solicits four aircraft load cells with NIIN 015396227 and part number 1220-QF-12.5K, requiring quotes to be submitted via email to dana.n.knittel.civ@us.navy.mil by the deadline of September 3, 2026. The solicitation is issued under N0038326QPC24 by the Naval Supply Systems Command Weapon Systems Support, with performance to be conducted at the Philadelphia, Pennsylvania location. All offers must include full compliance with mandatory source approval requirements outlined in the NAVSUP WSS Source Approval Brochure, and proposals lacking complete documentation will be disqualified. Government source approval is mandatory prior to award, and failure to obtain timely approval may result in the award being deferred to meet fleet support needs. Early and incremental deliveries are preferred. The contract includes several applicable clauses, such as a 12-month warranty with 60 days to report defects, Buy American Act requirements, security prohibitions, and mandatory use of Workflow Pro’s Assist Module. The offeror must also adhere to the mandatory use of the Invoice and Receiving Report Combo type with TBD routing details, and comply with equal opportunity and royalty provisions. The NAICS code is 332710, and the contract falls under a Department of Defense procurement with an emphasis on national defense and energy program priorities.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
Federal
PRESSURE REGULATOR
Solicitation # N0038326QPC21
The solicitation seeks the procurement of twelve pressure regulators, identified by NIIN 016554808 and part number 4016AS241-1, under contract number N0038326QPC21, issued by the Navy’s Navsup Weapon Systems Support office in Philadelphia, Pennsylvania. All submissions must be sent via email to dana.n.knittel.civ@us.navy.mil by the deadline of September 3, 2026, and must include full compliance with mandatory source approval requirements outlined in the NAVSUP WSS Source Approval Brochure, accessible online; proposals lacking complete source approval documentation will be rejected. Government source approval is mandatory prior to award, and failure to obtain timely approval may result in the requirement being re-evaluated based on fleet support needs. Early and incremental deliveries are preferred. The contract incorporates numerous statutory and regulatory clauses including Buy American requirements, warranty provisions for non-complex supplies covering twelve months with六十 days to report defects, mandatory use of Workflow Pro assist modules, security prohibitions, equal opportunity mandates, and notice of priority rating for national defense purposes. All offerors must also comply with annual certification requirements and royalty information filings as stipulated. The NAICS code for this procurement is 332710, and the offering is open under a general competitive solicitation with no specified set-aside.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
Federal
CABLE ASSY,AIRCRAFT
Solicitation # N0038326QPC22
This contract solicits repair services for two specific military-grade items: the CABLE ASSY,AIRCRAFT with part number 3654AS5180-1 and NSN 014974067, and the PENTIUM IV COMPUTER with part number 3654AS9220-1 and NSN 015452233. The contractor must restore both items to a Ready for Issue (RFI) condition in accordance with the latest approved technical publications, using new parts unless otherwise authorized, and must comply with rigorous configuration management and quality standards including ISO 9001 and SAE AS9100. All repairs must occur at approved facilities—ATEC/Astronics in Stafford, TX, or Irvine, CA—and require strict adherence to government-approved procedures; deviations necessitate formal approval from the Basic Design Engineer and the Procuring Contracting Officer. A 55-day repair turnaround time is mandated, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with an induction expiration date one year after contract award. The contract imposes multiple compliance obligations including Buy American requirements, security prohibitions, and mandatory use of the Workflow Pro system for payment processing. The contractor is responsible for all parts, tooling, and facilities unless explicitly designated as Government Furnished Material, and cannibalization is prohibited without specific written authorization. Beyond Economical Repair, Missing on Induction, and Over and Above Repair scenarios require prior written concurrence from DCMA and direction from the PCO before any work can proceed; unauthorized actions expose the contractor to full financial risk and potential rejection of delivered items. Throughput constraints must be specified monthly, and final reconciliation of pricing is contingent upon meeting the repair timeline and quality standards. Offers must be submitted via email to the designated point of contact, and prospective bidders must be pre-approved sources under NAVSUP WSS protocols, with complete source approval documentation required for consideration. Early and incremental deliveries are preferred, and any failure to comply with documentation, sourcing, or procedural requirements will result in disqualification.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Piston and Shoe ComponentsThe contract involves the manufacture of high-precision machined components including pistons, shoes, and retainers from steel and aluminum, all produced to meet rigorous military specifications. The work requires advanced CNC turning, milling, grinding, and finishing operations to achieve tight tolerances critical for defense applications. The NAICS code 332710 identifies this as a precision machining activity under the broader category of metal forging and stamping, with the Defense Logistics Agency acting as the contracting entity on behalf of the Department of Defense. The subcontract is positioned for performance under the contract reference SPE7MX26D5022 with delivery order SPE7M126F4693, issued on August 3, 2026, though specific performance location or point of contact details are not provided. All components must comply with defense-grade quality and inspection standards to ensure reliability in mission-critical systems.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332710
New
DIBBS
Manufacture and Supply of Straight Pin (Headle) per Drawing 53711 8616950The contract requires the manufacture and delivery of one precision-machined straight pin, known as a headle, strictly in accordance with military drawing 53711 8616950 Revision A. Production must fully comply with MIL-STD-1916 for sampling and inspection procedures and MIL-STD-129 for labeling and packaging requirements to ensure military-grade conformity. The item is being procured under a subcontract solicitation issued by the ASC Commodities Division of the Department of Defense, with performance expected to occur in Mechanicsburg, Pennsylvania, at the zip code 17050-2411. The NAICS code 332710 identifies this as a precision machining activity within the industrial manufacturing sector. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 11, 2026, leaving a narrow window for qualified vendors to submit proposals. All deliveries must meet exacting technical specifications and documentation standards as defined by federal military standards without exception.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Mechanical ComponentsThe contract involves the precision manufacturing of mechanical components, specifically the FEEL MECHANISM, RUDD, through CNC machining, finishing, and rigorous quality inspection processes to comply with military specifications. The work must be executed to exacting standards ensuring functionality, durability, and reliability under demanding operational conditions typical of defense applications. All manufacturing steps are subject to stringent quality control protocols to guarantee conformance to federal and military requirements. The contract is classified as a subcontract under NAICS code 332710, which corresponds to machine shop processing, and is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of September 3, 2026. While no specific place of performance or point of contact is provided, all work must adhere to the technical and regulatory criteria outlined by the contracting authority, and potential bidders are directed to the official DIBBS portal for full submission details and requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Component Manufacturing – Rigid Connecting LinkThe contract solicits the manufacture of a rigid connecting link to exact military specifications, requiring strict adherence to detailed material composition, dimensional tolerances, and surface finish standards. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, aligning with FAR 19.5. The NAICS code 332710 classifies this as a precision forging, stamping, and related manufacturing activity. Performance of the work is expected to be conducted in alignment with Defense Department requirements, with the Strategic Acq Program Directorate as the overseeing agency. All bids must be submitted by the deadline of August 18, 2026, with the solicitation initially posted on August 3, 2026. The contract is not tied to a specific geographic location for performance, and no point of contact is listed, indicating all inquiries must be handled through the official DIBBS portal linked in the posting.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
DIBBS
CLEVIS, ROD END
Solicitation # SPE7M4-26-Q-0908
The contract pertains to the procurement of 55 units of a CLEVIS, ROD END with NSN 5340-00-257-3765, issued under solicitation SPE7M4-26-Q-0908 by the Department of Defense’s Fluid Handling Division. Delivery is required within 120 days of award, and all hardware must comply with the current revision of the applicable military or consensus non-government part standard; previously compliant units manufactured under prior revisions are acceptable only if produced before the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlling based on acquisition type and amendment dates. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes or corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major unless otherwise stated, and zero non-conformances are required in sample lots unless contract exceptions apply. Identification marking must adhere to MIL-STD-130N, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 3, 2026, with responses due by August 6, 2026, and the primary point of contact is Colin Brown at the Department of Defense.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details