Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

49--NOZZLE,FUEL AND OIL

Active

SPE7M426T320FFederal

Response Deadline08/17/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotes for 10 fuel and oil nozzles with NSN 4930015054264 under solicitation number SPE7M426T320F. The item is to be delivered to DLA Dist San Joaquin, with a required delivery window of 168 days after award. The only approved source for this item is 0DT23 64048B, and no specifications, plans, or drawings are provided. This is a combined solicitation open to all responsible sources, with submissions required electronically through the SAM.gov portal; hard copies are not available. The solicitation was posted on August 6, 2026, and quotes must be submitted no later than August 17, 2026. The North American Industry Classification System code is 331318, and the contracting office is located in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact, as outlined in the solicitation document accessible through the provided online link.

General Info

10 fuel and oil nozzles NSN 4930015054264 due in 168 days, approved source 0DT23 64048B, SAM.gov submissions only.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 6

Combined Synopsis

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 4930015054264 NOZZLE,FUEL AND OIL: Line 0001 Qty 10 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0168 DAYS ADO Approved source is 0DT23 64048B. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

WIRE, ELECTRICAL

Solicitation # SPE7M1-26-T-267Z

The contract pertains to the procurement of 2,500 feet of electrical wire with the NSN 6145-01-496-8616 and part number 5M2409-001 under solicitation SPE7M1-26-T-267Z. The wire must be supplied by approved manufacturers including NEXANS AEROSPACE USA LLC, THE BOEING COMPANY, WIREMASTERS INC., and ALLIED WIRE AND CABLE LLC, with delivery expected within 62 days after receipt of order, though the original required delivery date is set for December 31, 2026. The quantity is subject to a 5% variance, allowing for a range between 2,375 and 2,625 feet. The item is to be delivered FOB Origin, with inspection and acceptance occurring at the destination—specifically at DLA Distribution Jacksonville, Building 175, Swan Road, Jacksonville, FL 32212-0103. Packaging must comply with ASTM D3951, but all requirements in the DLA Master List of Technical and Quality Requirements take precedence. Marking and labeling must adhere to MIL-STD-129, including barcoding for shipment and storage, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The unit of issue and quantity per unit pack are defined at 500 feet per unit pack. The contract incorporates numerous FAR and DFARS clauses related to compliance, cybersecurity, labor, safety, and procurement integrity. These include mandatory provisions on employment eligibility verification, combating trafficking in persons, sustainable products, hazard communication, and safeguarding covered defense information under DFARS 252.204-7012 and NIST SP 800-171. It also enforces restrictions on the use of hexavalent chromium, prohibited sources such as Communist Chinese military companies, and export-controlled items. Payment must be submitted via WAWF using invoices and receiving reports, and accelerated payments to small business subcontractors are required. Contractors are obligated to uphold whistleblower protections, disclose information appropriately, and avoid unauthorized obligations. Compliance with ISO 9001:2015 quality systems is implied, and all hazardous materials require proper labeling under OSHA and other federal statutes. The solicitation does not prescribe specific evaluation factors or weightings, suggesting

MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

CABLE, POWER, ELECTRI

Solicitation # SPE7M1-26-T-269H

This contract specifies the procurement of 261 feet of continuous electrical cable, identified by NSN 6145002641443 and part number M3432-05MOE5/80850, compliant with MIL-DTL-3432J Revision J dated September 8, 2022. The cable must be supplied as a single continuous length, with packaging in accordance with MIL-STD-2073-1E and preservation per MIL-DTL-12000, and marked in compliance with MIL-STD-129. The requirement prohibits the use of multiple unit packs unless the advice code permits it, with the advice code FC: 6C overriding any conflicting schedule information. Delivery is due within 20 days of contract award, FOB origin, with a tolerance of plus 10 percent and zero percent variance downward. Inspection and acceptance occur at the destination, and shipping must be accomplished via traceable freight methods—parcel post is strictly prohibited. The delivery address is Robins Air Force Base, Georgia, and the special marking code ZZ indicates additional requirements not further detailed. The cable is classified as a critical application item, and technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The solicitation number is SPE7M1-26-T-269H, issued under full and open competition, with a response deadline of August 20, 2026, and an original required delivery date of July 14, 2026. Point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

WIRE, ELECTRICAL

Solicitation # SPE7M1-26-T-269E

This contract calls for the procurement of 200 feet of electrical wire identified by NSN 6145-00-635-3838 under solicitation SPE7M1-26-T-269E, with delivery required within 37 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The wire is designated as a critical application item with specific part numbers tied to Rolls-Royce and General Motors, and it is a restricted source item requiring government engineering source approval. The material must be supplied in continuous length depending on the advice code, with multiple unit packs allowed only if the code is 2P or 39; otherwise, continuous spools are mandatory. Packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements, with all documentation superseded by the DLA Master List of Technical and Quality Requirements. The use of ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval. The unit of issue is feet, and delivery is FOB origin with a 5% quantity variance allowed. The item is classified under NAICS 331318, and all supplies must be labeled and marked per federal standards. The required delivery date is July 15, 2026, with a response deadline for proposals on August 20, 2026, and point of contact is David McDonald, DLA.

MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

NOZZLE, FUEL AND OIL

Solicitation # SPE8EE-26-T-2270

The contract pertains to the procurement of a fuel and oil nozzle with part number HM020-917-11 and NSN 4930-01-583-8673, supplied by ROBERTSON FUEL SYSTEMS, L.L.C., under solicitation SPE8EE-26-T-2270. A total of 11 units are required to be delivered FOB origin with zero variance allowed in quantity, and the delivery window is set at 167 days from the contract award, with an original required delivery date of April 12, 2027. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, while also adhering strictly to MIL-STD-129 for marking and labeling, and RP001 for DLA-specific packaging requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and all technical and quality provisions referenced by R or I numbers are incorporated from the official DLA database. Sampling requirements mandate the use of MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and critical attributes are assigned verification level VII or an AQL of 0.1, with major and minor attributes at IV and II or AQLs of 1.0 and 4.0 respectively. The item is classified as a critical application item, and the contract includes specific guidance on unit of issue, palletization, and transportation procedures referencing DLAD Proc Notes C19 and C20. The delivery address is DLA Distribution’s New Cumberland Facility in Pennsylvania, and the solicitation is a total small business set-aside under NAICS code 331318 with a response deadline of August 17, 2026, and the point of contact for inquiries is Philip Ferrara of the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

WIRE, ELECTRICAL

Solicitation # SPE7M0-26-T-031U

The contract pertains to the procurement of electrical wire identified by NSN 6145-00-003-0731, with a requirement for 500 feet in continuous length, delivered in a single spool. The wire must comply with ANSI/NEMA HP3-2012 standards and be packaged in accordance with MIL-STD-2073-1E and MIL-DTL-12000 for preservation and packaging, marked per MIL-STD-129 with special coding ZZ-ZZ. Delivery is FOB origin within five days, with a strict quantity variance of plus 10 percent and no tolerance for underdelivery. The item is classified as a commercial item and is explicitly exempt from use of Class I ozone-depleting chemicals, overriding any conflicting specification requirements unless substitutes are pre-authorized. Configuration change management and variance requests are subject to formal engineering change proposals, and government identification must be removed from non-accepted supplies. The advice code 2L governs packaging, requiring continuous length, and this requirement supersedes any conflicting schedule details. The wire is designated a critical application item and is intended for delivery to Poland FMS Consolidation in Huntsville, AL, with transportation governed by DLAD procedure notes C19 and C20. The solicitation number is SPE7M0-26-T-031U, with full and open competition applicable, and the response deadline is August 17, 2026, under a federal procurement by the Department of Defense, Maritime Supply Chain ESOC Buys.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

COMPUTER SUBASSEMBL

Solicitation # SPE8EN-26-T-2788

This contract solicitation, issued by the Defense Logistics Agency under solicitation number SPE8EN-26-T-2788, seeks the procurement of four units of a computer subassembly identified by NSN 7050014916931, with a required delivery within 167 days and an original delivery date of October 9, 2026, and a need ship date of February 1, 2027. The item is to be delivered FOB origin, with acceptance and inspection occurring at the destination located at DLA Distribution San Diego, 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. Packaging must comply fully with MIL-STD-2073-1E using a unit pack code U, clean and dry preservation method, jelly anticorrosive wrap material, and fiberboard box containers, with all marking adhering strictly to MIL-STD-129 and showing no special markings. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific permissible uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. The solicitation incorporates by reference the DLA Master List of Technical and Quality Requirements, identifying specific technical and quality criteria by “R” or “I” numbers, and mandates compliance with CMMC Level 2 Self-Assessment for cybersecurity. Contractual obligations include adherence to hazardous material labeling standards under 29 CFR 1910.1200 and DFARS 252.223-7001, requiring submission of Safety Data Sheets and proper packaging and labeling of controlled substances. The contractor must also comply with employment and subcontractor provisions including affirmative action for workers with disabilities, combating human trafficking, employment eligibility verification, and sustainable product acquisition policies. Invoicing is strictly required through Wide Area WorkFlow, and all proposals must be submitted electronically via the DLA Internet Bid Board System by the August 17, 2026 deadline. The award is expected to be made on a Lowest Price, Technically Acceptable basis, with no unit pricing or total value specified in the contract line item, indicating the bid is being evaluated on technical compliance and

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Solicitation # SPE8E7-26-T-3469

The Defense Logistics Agency is soliciting the procurement of 10 tubeaxial fans under solicitation SPE8E7-26-T-3469, with a delivery requirement of 193 days after contract award to the DDSP New Cumberland Facility in Pennsylvania. The item, identified by NSN 4140-01-092-0807, must comply with rigorous technical, quality, and cybersecurity standards as defined in the DLA Master List of Technical and Quality Requirements and referenced DFARS clauses. The contract mandates adherence to CMMC Level 2 certification, requiring the contractor to be a certified third-party assessment organization with implemented cybersecurity controls aligned with NIST SP 800-171. Technical data associated with the product is subject to export control under ITAR or EAR, and access is restricted to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and questionnaires. The contractor must also comply with stringent packaging and labeling requirements per ASTM D3951, MIL-STD-129, and RP001, including hazardous material labeling under 29 CFR 1910.1200 and barcoding for DoD logistics tracking. Inspection and acceptance of the product occur at the origin, with the Government retaining full authority to verify conformance against ISO 9001:2015 quality systems, MIL-STD-1916 inspection methodologies, and applicable technical drawings, requiring zero non-conformances unless otherwise specified. The contract incorporates a comprehensive suite of FAR and DFARS clauses addressing cybersecurity, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials, export controls, and subcontractor requirements, with deviations applied to ensure alignment with agency-specific mandates. Payment must be submitted via Wide Area WorkFlow, and the contractor must provide a Unique Entity Identifier and CAGE code for itself and any subcontractors, while also declaring its small business status and socioeconomic certifications if applicable. FOB terms designate origin as the point of risk transfer, and all contractual obligations are governed by a fixed-price structure under which the Government retains control over inspection, acceptance, and compliance verification.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

WIRE, ELECTRICAL

Solicitation # SPE7M1-26-T-251B

The contract specifies the procurement of 8,250 feet of electrical wire identified by NSN 6145-00-948-9478 and part number SPE7M1-26-T-251B, with delivery required within 154 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The wire must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with configuration control governed by engineering change proposals and variance requests. The item is designated as a Critical Application Item and must comply with SAE AS22759/11A and AS22759E standards. Packaging must adhere to MIL-STD-2073-1E and preservation requirements per MIL-DTL-12000, with markings in accordance with MIL-STD-129. The wire must be supplied in continuous length if the advice code is 2N, 28, or 34; for advice codes 2P or 39, multiple unit packs are permissible, with the advice code overriding any conflicting schedule data. The material must originate from manufacturers listed on the Qualified Products List or Qualified Manufacturers List due to its status as a primary QPL/QML item. The delivery is FOB origin, with inspection and acceptance occurring at destination, and a quantity variance of plus or minus five percent is permitted. The contract includes specific packaging data, including unit containers, intermediate containers, and preservation methods, all detailed in prescribed codes. The solicitation number is SPE7M1-26-T-251B, with a response deadline of August 17, 2026, and the contracting officer is Alisha Blanton.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SPRING, HELICAL, EXTENSI

Solicitation # SPE7L1-26-T-916N

The contract calls for the procurement of one helical extension spring with NSN 5360011419523 and part number FORENTA LP 11023 P/N 15737, to be delivered within 20 days after receipt of order under FOB destination terms to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with shipment coordinated via DLA’s VSM system and referencing RDD 777. Packaging must strictly adhere to MIL-STD-2073-1E with specified preservation methods, unit and intermediate containers, and packaging code U, while marking complies entirely with MIL-STD-129 and includes no special marking code. The item is subject to DLA’s Master List of Technical and Quality Requirements, referenced via R or I numbers, and prohibits the intentional introduction of mercury or mercury-containing compounds unless part of exempted functional components like batteries or instruments specified by NAVSEA, which must also be shockproof with dual containment. Hazardous materials require full compliance with the Hazard Communication Standard and submission of a Safety Data Sheet prior to award, which is a mandatory pass/fail gate for eligibility. The contractor must comply with all relevant cybersecurity requirements including NIST SP 800-171 DOD Assessment Requirements under deviation 2026-O0025, prohibitions on hexavalent chromium and covered defense telecommunications equipment, and the Buy American Act and Berry Amendment with a reduced threshold of $150,000. Payment must be processed electronically through WAWF with both invoice and receiving report submitted, and the contractor is required to maintain current representations in the System for Award Management, including small business status, employment eligibility, and trafficking-in-persons compliance. All submissions must be made via DIBBS by 2026-08-17, and the solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, with potential for automated award unless first article testing is required. The contractor must register in DLA’s AMPS to access VSM and ship to DLA, and any additive manufacturing components proposed require prior request for engineering evaluation. The contract also enforces whistleblower rights, electronic payment compliance, and restrictions on arbitration agreements, mandatory confidentiality terms, and the use of communist Chinese military company supplies.

LAND SUPPLY CHAIN

POSTED

DEADLINE

WIRE, ELECTRICAL

Solicitation # SPE7M2-26-T-6038

This contract specifies the procurement of electrical wire identified by NSN 6145-01-060-7863, with a total quantity of 7,946 linear feet divided across three contract line items of 1,913 feet, 2,533 feet, and 3,500 feet respectively. The wire must conform to SAE AS22759E and TDP Rev B Gen 3 standards with part number M22759/16-18-9, and compliance with MIL-DTL-12000 for preservation and packaging is required. Each unit of issue is a 500-foot spool, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with marking in accordance with MIL-STD-129 and no special marking applied. Delivery is FOB origin with a 14-day lead time and a permissible quantity variance of plus or minus five percent, with inspection and acceptance occurring at the destination. The wire must be furnished in continuous length based on advice codes, and no mercury or mercury-containing compounds may be intentionally added or come in direct contact with the material except for specific exceptions like batteries or instruments meeting NAVSEA 5100-003D guidelines. The item is classified as a commercial item and is subject to the Qualified Products List or Qualified Manufacturers List requirements. It is designated as a critical application item requiring strict configuration control, and any deviations must be formally requested through an Engineering Change Proposal or variance process. Deliveries are to be sent to three DLA distribution centers located in Robins AFB Georgia, New Cumberland Pennsylvania, and Hill AFB Utah, with shipment deadlines ranging from September 2026 to May 2028, though the original required delivery date is uniformly March 27, 2027. Contract data indicates the solicitation was issued under SPE7M2-26-T-6038 with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of 4" x 4" x 1/4" 6061-T6 Aluminum Square TubeThe contract requires the supply of four units of 4-foot-long 4-inch by 4-inch by 1/4-inch wall thickness aluminum square tubing made from 6061-T6 alloy or an acceptable domestic equivalent. The material specification is critical, as 6061-T6 is a high-strength, heat-treatable aluminum known for its excellent corrosion resistance and weldability, commonly used in structural applications requiring durability and precision. The tubing must meet exact dimensional and material standards to ensure compatibility with the recipient’s operational needs. The acquisition is classified as a subcontract under NAICS code 331318, which pertains to aluminum extrusion, indicating the work involves specialized manufacturing processes. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a limited window for submissions. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, suggesting the material will be delivered directly to a Department of Energy facility operated by ORNL UT-Battelle LLC. As a DOE contractor, the organization is likely utilizing the tubing for research, development, or infrastructure projects where material integrity is paramount. No set-aside provisions are specified, meaning the contract is open to any qualified supplier regardless of business size or designation.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Supply of 6" x 2" x 1/4" 6061 Aluminum Rectangle TubeThe contract calls for the supply of two units of 4-foot-long 6-inch by 2-inch by 1/4-inch 6061 aluminum rectangle tube or a domestic equivalent, ensuring material compatibility and performance standards. The specification mandates the use of 6061 aluminum, a widely recognized alloy valued for its strength, weldability, and corrosion resistance, making it suitable for structural and mechanical applications. Each tube is dimensioned precisely to meet engineering requirements, and the quantity is limited to two units, indicating a targeted procurement for specific project needs. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum ingot and alloy manufacturing, and is issued by Oak Ridge-based ORNL UT-Battelle LLC, a Department of Energy contractor. The place of performance is designated as Oak Ridge, Tennessee, with a 37830 ZIP code, suggesting the material will be delivered directly to a DOE-affiliated facility. The response deadline is set for August 11, 2026, at 8:00 PM Eastern Time, with the opportunity posted on August 4, 2026, providing a one-week window for submissions. No set-aside designation or specific point of contact is indicated, and the procurement is open to qualified suppliers able to meet the technical and delivery requirements without additional constraints.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

47--MANIFOLD ASSEMBLY,HYDR

Solicitation # SPE7M326Q0173

The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotes for a Small Business Set Aside procurement of two MANIFOLD ASSEMBLY, HYDR units with NSN 4730014088885, to be delivered to W1A8 DLA DISTRIBUTION within 447 days after award. The sole approved source for this item is 20722 KT-4571-1, and no specifications, plans, or drawings are available to potential vendors. The solicitation, identified as SPE7M3026Q0173, was posted on August 7, 2026, with a response deadline of August 15, 2026, and is issued as a combined RFQ under NAICS code 326122. All responsible sources may submit electronic quotes, and hard copies of the solicitation are not provided. Questions must be directed via email to the designated point of contact, with additional information accessible through the SAM.gov portal using the solicitation number. The office managing this procurement is located in Columbus, Ohio.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

VALVE, GLOBE - NSN 4820-00-495-6263 - Project CM26036001

Solicitation # SPE7MX26RX055

The contract seeks to procure Valve, Globe with NSN 4820-00-495-6263 under a Firm-Fixed Price Indefinite Delivery Contract using FAR Part 12.201 procedures, with a base period of three years and two one-year options. The item is classified as commercial, and the acquisition is unrestricted with no small business set-aside. The estimated annual demand is 242 units, and the North American Industry Classification System code is 332911 with a size standard of 750 employees. Technical requirements are governed by Basic Drawing NR 80064 4384536, Revision N dated 09/27/2016, and the part number is 803-4384536-71B1AF. All materials must comply with the Trade Agreement Act and are subject to delivery within 373 days of the issue of a DD Form 1155 delivery order, with no shipments permitted prior to order issuance. FOB and I/A are both listed as origin, meaning the offeror bears all transportation costs and risks from the point of shipment. Offers must be submitted via the DIBBS system using a completed SF1449 form uploaded electronically or emailed directly to kyle.blazek@dla.mil. The solicitation, numbered SPE7MX-26-R-X055, was posted on August 7, 2026, with responses due by September 11, 2026, and is available only online through DIBBS. Evaluation will consider price, delivery, and performance, with all submissions required in English and U.S. dollars. Technical data and specifications can be accessed via the TDMT portal.

Industrial Valve Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # 7016886417

The contract pertains to the procurement of a spur gear with NSN 3020-008880130, identified by part number 3-51145-1, and is governed by acquisition guidelines that restrict sourcing to approved manufacturers to ensure quality and technical integrity. Six approved sources are currently listed: Process Gear Company Inc., Mid-America Aerotech LLC, Hydromach Inc, Thomas Instrument Incorporated, G&N Rubicon Gear Inc, and Northrop Grumman Systems Corporation, all producing the identical part number under stringent engineering controls. The AMC/AMSC designation of “3 C” mandates acquisition directly from the original manufacturer for second or subsequent purchases and requires engineering source approval due to proprietary design expertise, specialized manufacturing knowledge, and non-transferable technical data held exclusively by the approved suppliers. Alternative manufacturers seeking approval must undergo a rigorous qualification process through the DLA Land and Maritime Alternate Offer/Source Approval Request Program, where applicants must prove their product meets or exceeds the quality and performance standards of the existing approved items, including submission of comprehensive technical documentation validated by the cognizant government engineering authority. Solicitations for potential new sources close on August 14, 2026, and all submissions must be directed to Contract Specialist Emily Castle at emily.mcknight@dla.mil, with compliance to the specified format and criteria outlined in the DLA Land and Maritime Alternate Offer Program guidelines.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

FILTER ELEMENT, FLUID - NSN 4330-01-458-6214 - Project CM26036002

Solicitation # SPE7MX26RX063

The contract is for the procurement of Filter Element, Fluid with NSN 4330-01-458-6214 under a Firm-Fixed Price Indefinite Delivery Contract with a three-year base period and two one-year option periods, utilizing FAR Part 12.201 procedures as the item is classified as commercial. The acquisition is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses with a size standard of 700 employees, and the Buy American Act applies. The estimated annual demand is 884 units, with a requested delivery time of 44 days after issuance of each delivery order, and no deliveries are permitted prior to the submission of a DD Form 1155. The sole approved source is LAWRENCE FACTOR, INC. with part number X53248, and shipments are FOB origin with delivery to destination as specified in individual orders. Responses must be submitted via the DIBBS system using a scanned SF1449 form or by email to kyle.blazek@dla.mil, with no hard copies available. The solicitation was posted on August 7, 2026, with responses due on September 11, 2026, and evaluation will consider price, delivery, and performance, with all offers required in English and U.S. dollars.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

Disconnect Assembly

Solicitation # SPE7M426R0076

No solicitation is currently open, but this notice serves as a market research effort under FAR Part 10 to identify capable manufacturers of the Disconnect Assembly with NSN 1660010350628 and part number 024-780136-1. The item is designated as a critical application component, and procurement is currently restricted to the approved source, Mission Systems Orchard Park Inc with CAGE code 04577. Technical data is not available, and any alternative suppliers must submit a complete datapackage covering both the approved and alternate parts for future evaluation, though alternate offers will not be considered at this time. Interested parties are required to provide the manufacturer’s city and state, CAGE code, and point of contact information, all to be sent to Contracting Officer Helen Davis at helen.davis@dla.mil by the response deadline of August 14, 2026. The notice is issued by DLA Land and Maritime, located in Columbus, Ohio, and is intended solely to gather market intelligence for potential future procurement actions.

Electronic Connector Manufacturing

POSTED

DEADLINE

Valve, Linear, Direct

Solicitation # CM26161006

The contract solicits potential sources for the valve, linear, direct with NSN 4810-01-607-7882, a component requiring engineering source approval due to its specialized design and manufacturing requirements. Currently, only two approved sources—Sikorsky Aircraft Corporation with part number 70310-03104-103 and Transdigm Inc with part number 512900-3—are authorized to supply the item, as they possess proprietary technical data, manufacturing expertise, and design knowledge that are essential to maintaining quality and are not economically available to the government. The acquisition management code “1C” indicates that this is a competitive acquisition for a second or subsequent time, but any new source must undergo formal qualification through the DLA Weapons Support Alternate Offer/Source Approval Request program to prove their product equals or exceeds the performance and quality of the existing approved items. The process requires comprehensive technical documentation demonstrating equivalence or superiority, and submissions must be reviewed and approved by the cognizant government engineering activity before qualification. Interested parties must submit all qualification materials to Contract Specialist Caitlin Ferry by the response deadline of August 14, 2026, and are encouraged to review the DLA Weapons Support Alternate Offer/Source Approval Program guidelines on the official DLA website for detailed submission requirements. The solicitation is not set aside for small businesses or other categories and falls under NAICS code 332912. The point of contact for inquiries is Caitlin Ferry, with Karin Wilson as a secondary contact, both located at the DLA Land and Maritime office in Columbus, Ohio. The government is actively seeking qualified alternate suppliers to ensure continued supply chain resilience while maintaining strict quality standards for this critical component.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

ACTUATOR ASSEMBLY

Solicitation # SPE7M226R0017

The U.S. Department of Defense, through DLA Land and Maritime, has issued a sources sought notice under solicitation number SPE7M226R0017 to explore market availability for the Actuator Assembly identified by NSN 1720-01-034-9526 and part number 612849-3, manufactured in accordance with Navy drawing 80020. This item is classified as a Critical Application Item for Aircraft Launch and Recovery Equipment and must be produced exclusively by approved sources. The government is seeking to procure between 67 and 180 units, with requirements including Contractor First Article Testing and certified Welding Procedures. Vendors must hold Enhanced JCP Certification to be considered and need to obtain technical data access via DLA cFolders, with additional permissions available only through a formal request to jcpvalidation@dla.mil if access is denied. Communication regarding validation status must be directed to DLAJ344DataCustodian@dla.mil, and timely compliance is critical as delays may disqualify vendors from future solicitations. The applicable NAICS code is 336413 with a small business size standard of 1,250 employees. Responses to the market survey must be submitted by August 17, 2026, to Susan Lupo at susan.lupo@dla.mil. This notice does not constitute a solicitation or binding obligation, and no compensation will be provided for submitted information. Final procurement will be determined based on market feedback, and products, if awarded, will be delivered to a DLA stock location.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FILTER ELEMENT, INTAKE AIR CLEANER

Solicitation # SPE7MX26RX054

The contract is for the procurement of Filter Element, Intake Air Cleaner with NSN 4310-01-595-9169 under a Firm-Fixed Price Indefinite Delivery Contract using FAR Part 12.201 procedures, with a base period of three years and two optional one-year extensions. The item is commercial and subject to the Trade Agreements Act, with an estimated annual demand of 3,407 units. The acquisition is unrestricted and will be conducted through the DLA Internet Bid Board System, where offers must be submitted via the SF1449 Request for Proposal, scanned and uploaded through DIBBS or emailed to Daniel.West@dla.mil. Approved sources include CUMMINS POWER GENERATION INC, WIX CORP, CUMMINS FILTRATION INC, CHAMPION LABORATORIES, INC., DONALDSON COMPANY, INC., and BALDWIN FILTERS INC, each with designated part numbers. Delivery must occur within 158 days after issuance of a delivery order, and no shipments are permitted before the DD Form 1155 is issued. The solicitation was issued on or about August 11, 2026, with a response deadline of September 10, 2026, though the posted deadline on record is August 14, 2026. Awards will be based on a combination of price, delivery, and performance, with all submissions required in English and U.S. dollars. The point of contact for inquiries is Daniel West, with Karin Wilson as a secondary contact.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract requires compliance with MIL-STD standards for the preservation, packaging, and marking of sensitive military shipments, ensuring that all materials are protected against environmental damage, corrosion, and physical degradation during transit and storage. The work must adhere strictly to Department of Defense specifications to maintain operational readiness and logistical integrity across the supply chain. This subcontract is issued under NAICS code 561910 and is managed by DLA Land and Maritime under the broader Department of Defense structure. The solicitation was posted on August 6, 2026, with a response deadline of August 21, 2026, at 4:00 p.m. The place of performance and organizational details are not specified, but the performance location will likely involve military logistics hubs or defense supply facilities. All work is expected to support secure and standardized handling of critical defense equipment, with no set-aside designation applied, meaning the opportunity is open to qualified contractors regardless of business size or ownership category.

Packaging and Labeling Services

POSTED

DEADLINE

Phosphate Coating Services for Propeller Shaft ComponentsThe contract requires the provision of military-compliant phosphate coating services specifically for drivetrain components, adhering strictly to the standards outlined in MIL-STD-171 and TT-C-490. These coatings are essential for corrosion resistance, lubricity, and adhesion of subsequent finishes on critical propeller shaft parts used in defense applications. The work must be performed to exacting military specifications to ensure performance, durability, and interoperability within defense systems. This is a subcontract opportunity issued by the Defense Logistics Agency Land and Maritime under the Department of Defense, with a NAICS code of 332813 indicating specialization in metal coating services. The solicitation was posted on August 6, 2026, and responses are due by August 21, 2026. While the place of performance and point of contact details are not specified, the work is expected to support military logistics and maintenance operations, and all services must meet the rigorous quality and compliance criteria mandated by federal defense standards.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Manufacture of Vehicular Propeller Shaft (NSN: 014130080)The contract is for the manufacture and delivery of a second variant of a military propeller shaft designated by NSN 014130080, requiring strict adherence to Qualified Products List and Qualified Manufacturer List sourcing standards to ensure component authenticity and military-grade reliability. The work must include specialized packaging protocols compliant with defense logistics requirements, ensuring protection during transport and storage under harsh environmental conditions. This is a subcontract opportunity issued under the NAICS code 336390, categorized under the Department of Defense through DLA Land and Maritime, with a response deadline of August 21, 2026, and posted on August 6, 2026. The place of performance and point of contact details are not specified, and no set-aside designation is indicated, leaving eligibility open to all qualified subcontractors who can meet the technical and supply chain compliance criteria.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Manufacture of Vehicular Propeller Shaft (NSN: 014235120)The contract is for the manufacture and delivery of a military-spec propeller shaft equipped with a universal joint, engineered to meet stringent source control drawings and technical standards applicable to Department of Defense vehicles. The item is identified by NSN 014235120 and falls under NAICS code 336390, indicating it pertains to motor vehicle parts manufacturing. The work must be performed in full compliance with all military specifications to ensure operational reliability and interoperability within defense platforms. The solicitation is classified as a subcontract opportunity posted by DLA Land and Maritime on August 6, 2026, with a response deadline of August 21, 2026. There is no set-aside designation specified, meaning the contract is open to all qualified contractors regardless of size or business type. The place of performance is not detailed, and no point of contact information is provided in the data, but the official solicitation can be accessed through the SAM.gov portal for complete technical and administrative requirements. All deliverables must be fabricated, tested, and documented to meet the exacting standards required for military use.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE