This Solicitation opportunity from Department Of Defense was posted on August 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

49--TEST SET SUBASSEMBL

Closed

N0010426QXB87Federal

Submission Closed09/14/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998

New

SLED

ASTM Type I/III Water Treatment Skid FabricationThis subcontract involves the engineering, fabrication, and supply of modular, skid-mounted pure-water treatment systems for facility projects at North Dakota State University. The scope of work includes the integration of valves and instrumentation, as well as comprehensive factory testing of all assembled equipment to ensure operational readiness before delivery. All delivered systems must strictly adhere to ASTM Type I and Type III water-quality criteria. Interested parties should note that the response deadline for this opportunity is November 17, 2026.

POSTED

DEADLINE

NDSU - ASTM Type I and Type III Pure Water System Replacement

Solicitation # SRC000467

North Dakota State University is soliciting proposals under solicitation number SRC000467 for the replacement of its existing pure-water treatment system. The project requires a qualified offeror to provide a complete, integrated ASTM Type I and ASTM Type III pure-water generation and distribution support system, including a 500-gallon Type III and 250-gallon Type I storage tank. The scope of work encompasses all professional services, engineering, fabrication, controls, testing, commissioning, and training. The successful contractor must ensure the system meets specific water-quality criteria and must complete the project by the final deadline of June 15, 2027. Proposals must be submitted electronically via the NDBuys portal by November 17, 2026, at 2pm CT. Submissions are divided into a technical envelope and a financial envelope. Evaluation is based on a 100-point scale, with 80 points allocated to the technical proposal and 20 points to the cost proposal. A mandatory minimum of ten years of applicable experience is required for eligibility. The procurement process is managed by Procurement Officer Casie Ewalt, and the award will be based on a combined weighted score of technical and cost factors.

POSTED

DEADLINE

Fuel Delivery Station (FDS) System IntegrationThis subcontract for the Department of Defense, specifically Mschq Norfolk, involves the system integration of a Fuel Delivery Station for prime contractors working on Military Sealift Command tanker projects. The scope of work includes the supply and installation of one operational port-side station equipped with double hose probe rigs, constant tension spanwire winches, and passive safety slip-clutch devices. To ensure operational readiness and compliance, the contractor must perform Factory Acceptance Trials and Installation Weight Tests in accordance with NTTP 4-01.4 and MIL-STD-1399/301 standards. The project is categorized under NAICS code 333999 and has a response deadline of November 3, 2026.

POSTED

DEADLINE

Specialized Hangar Systems / Maintenance Equipment SupplierThis subcontract opportunity through the Department of Defense, specifically the W074 Endist Wilmington, involves the supply and installation of specialized equipment for aircraft hangars and maintenance facilities. The scope of work focuses on supporting prime contractors on USACE AFSOC projects by providing and commissioning critical hangar-specific systems, including specialized lighting, power, and compressed air. All provided equipment and installations must strictly adhere to AFSOC maintenance facility standards. The successful contractor will be responsible for the full lifecycle of the systems, from delivery to final commissioning, ensuring that all maintenance facility systems are fully operational and compliant with agency requirements.

W074 Endist Wilmington

POSTED

DEADLINE

HPAC Input Module Hardware SupplyThis subcontract involves the manufacture and procurement of replacement input modules for the number one and number two High Pressure Air Compressors supporting prime contractors at the Norfolk Naval Shipyard. The selected supplier is responsible for delivering submarine-specification hardware FOB Destination to the performance site in Portsmouth, ensuring all components strictly adhere to NAVSEA technical specifications. In addition to hardware requirements, the contractor must maintain full compliance with DFARS cybersecurity standards for suppliers. This effort falls under NAICS code 333998 and is managed through the Department of Defense for the Norfolk Naval Shipyard.

Norfolk Naval Shipyard Gf

POSTED

DEADLINE

Six-column Mobile Lift System

Solicitation # W6897-27-0514

The Department of National Defence requires the supply, delivery, installation, commissioning, and virtual training for a new six-column mobile vehicle lift system at CFB Suffield in Alberta. The system must be capable of raising heavy military and commercial vehicles weighing up to 108,000 lbs and must be CSA-certified, cUL-certified, or equivalent to applicable Canadian safety and electrical standards. Key deliverables include six mobile column lifts with all necessary charging equipment, accessories, and a comprehensive suite of operator, maintenance, and parts manuals. Virtual training for maintenance personnel must be provided within five business days of complete delivery. This solicitation is open only to Canadian Suppliers and Suppliers of an Applicable Trading Partner. Award will be based on the lowest evaluated price among offers that meet all mandatory technical criteria. All goods must be delivered Delivered Duty Paid (DDP) to Building 163, CFB Suffield, in new and unused condition. Additionally, the contractor must adhere to mandatory environmentally preferable packaging specifications, ensuring materials are reusable, returnable, or recyclable. Proposals must be submitted via email and divided into technical, financial, and administrative sections, including the required offer submission and declaration forms.

Department of National Defence

POSTED

DEADLINE

Change Maker SupplierThis subcontract agreement establishes a partnership for the supply of automated change-making machines to support prime contractors on City of Dallas procurement projects. The supplier is responsible for providing hardware that meets all city specifications and ensuring the equipment is delivered FOB to designated sites. To ensure compliance and safety during on-site setup, the supplier must maintain active General Liability and Workers Compensation insurance. This procurement opportunity is categorized under NAICS code 333998 and is managed through the City of Dallas.

POSTED

DEADLINE

Trash Compactor Equipment SupplierThis subcontract opportunity is for a Trash Compactor Equipment Supplier to provide commercial-grade industrial compactors for prime contractors working on City of Savannah waste management projects. The selected supplier will be responsible for the manufacturing, sourcing, and delivery of these units to designated city sites, ensuring that all equipment strictly adheres to ANSI/OSHA industrial safety standards for waste equipment. The solicitation was posted on October 19, 2026, with a response deadline of November 3, 2026. Operating under NAICS code 333998, this contract focuses on the procurement and delivery of specialized industrial machinery to support municipal waste infrastructure within the state of Georgia.

POSTED

DEADLINE

Trash Compactor - Event No. 12610

Solicitation # PE-62551-NONST-2026-000000242

The City of Savannah is soliciting bids for a trash compactor under solicitation number PE-62551-NONST-2026-000000242, also identified as Event No. 12610. This opportunity was posted on October 19, 2026, for performance within the state of Georgia. A pre-bid meeting via Microsoft Teams is scheduled for October 27, 2026, at 2:00 PM to address potential questions or issues. All bids must be submitted electronically through the official supplier portal at www.savannahga.gov/bids by the deadline of 1:30 PM on Tuesday, November 3, 2026. The City of Savannah promotes equal opportunities for all vendors, and the Board of Purchase maintains the right to reject any proposals or waive formalities. Primary contact for this solicitation is Tiffany Daniels.

POSTED

DEADLINE

Linear Electro-Mechanical Actuator SupplierThis subcontract involves the supply of ten linear electro-mechanical actuators for prime contractors supporting DLA supply contracts. The scope of work requires the manufacture or procurement of Kongsberg Defence and Aerospace AS part number 108674-01, which is classified as a Critical Application Item. All units must be delivered fully marked and packaged in accordance with MIL-STD-130, MIL-STD-2073-1E, and MIL-STD-129 standards. To be eligible, suppliers must maintain CMMC Level 2 compliance and hold a quality system certification of either ISO 9001 or SAE AS9003. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance located in New Cumberland. Responses are due by October 27, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Specialized Components for Respirator BlowersThis subcontract involves the supply of raw materials, electronic components, and mechanical parts required for the Blower Unit, identified by NSN 4240-01-655-6330, supporting prime contractors on DLA Troop Support projects. The selected provider must ensure all components comply with the Buy American and Balance of Payments Program requirements and certify that all materials are free of Class I ozone-depleting chemicals. Managed under the Department of Defense through the DDSP New Cumberland Facility, the contract requires the delivery of both the physical component parts and the necessary material and process certifications to the prime manufacturer. The opportunity falls under NAICS code 333998, with a response deadline set for October 26, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0276

Solicitation SPE7M2-27-T-0276 is a fixed-price procurement issued by the DLA Weapons Support Nuclear Reactor Program for 17 units of Subplate Assembly, identified by NSN 1720-01-049-2476 and part number MS20995C47. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of August 2, 2027, and an original required delivery date of October 31, 2027. Delivery is specified as FOB Origin. The procurement prohibits the use of additive manufacturing processes unless specifically authorized by the contracting officer. Due to the nature of the technical data, this contract is subject to strict export controls under ITAR and EAR. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and be approved by the DLA controlling authority to access the data. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while hazardous materials must comply with the Hazard Communication Standard. The solicitation incorporates several regulatory requirements, including the Buy American Act and the Berry Amendment, with a reduced threshold of 150,000 dollars for domestic material restrictions. Price evaluation preferences are available for certified HUBZone small business concerns. Administrative requirements include the use of the Wide Area WorkFlow system for all invoicing and payment requests. Cybersecurity compliance is mandated via DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

Solicitation N0010426QXB87 is a Firm-Fixed Price request for the manufacture of a Test Set Subassembly (NSN 4921-01-641-6366) for the Department of the Navy, specifically NAVSUP Weapon Systems Support Mech. The scope includes the production of hardware based on Technical Data Package version 002 and a comprehensive list of associated drawings. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with past performance serving as the primary evaluation factor and price as a secondary factor. The government utilizes the Supplier Performance Risk System to assess item, price, and supplier risks. The contract mandates strict adherence to quality and safety standards, requiring an ISO 9001 compliant quality system and strict prohibition of metallic mercury contamination. Technical requirements include marking per MIL-STD-129 and configuration management per MIL-STD-973. Packaging must comply with MIL-STD-2073-1, with specific levels defined for domestic and overseas shipments. Inspection and acceptance are conducted at the origin, with government source inspection required. All electronic invoicing and payment requests must be processed through the Wide Area Workflow system. Proposals are due by September 14, 2026, and must be submitted electronically to the designated Procurement Contracting Officer.

General Info

One NSN 7H-4921-016416366 test set subassembly, FOB origin, full competition, no technical data restrictions, due August 12, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

333998 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

Set-Aside

NONE

Documents

Amendment 0001 to Solicitation N00104-26-Q-XB87

amendment

High

NO0014-26-Q-XB87 RFQ for Test Set Subassembl

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedJul 23

Presolicitation

Type ChangedJul 28

Presolicitation → Solicitation

Notice updatedJul 31

Notice details unchanged. Attachments may have changed.

Type ChangedAug 28

Solicitation → Presolicitation

Type ChangedAug 28

Presolicitation → Solicitation

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 08:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

Matthew B Takach

contact@example.gov

+1 (555) 000-0000

Full Description

CONTACT INFORMATION|4|N774.1|CFC|771-229-0584|matthew.b.takach.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Combo||TBD|N00104|TBD|TBD|See Schedule|TBD|||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(FEB 2026))|2||| CONTRACTOR PURCHASING SYSTEM ADMINISTRATION-BASIC (DEVIATION 2026-O0015)|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| The purpose of this amendment is to extend the offer due-date to 14 SEP 2026. All other terms and conditions remain unchanged. A. Electronic submission of any quotes, representations, and any necessary certifications shall be accomplished via an email directed to matthew.b.takach.civ@US.NAVY.MIL. B. General Requirements: MIL-STD Packaging, Government Source Inspection Required. C. All freight is FOB Origin. D. This RFQ is for a BUY/Procurement. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. Verify nomenclature, part number, and NSN prior to responding. E. Only a Firm-Fixed Price (FFP) will be accepted. F. Must adhere to IUID requirements of DFARS 252.211-7003 G. The ultimate awardee of the proposed contract action must be an authorized source. Award of the proposed contract action will not be delayed while an unauthorized source seeks to obtain authorization. H. Your quote should include the following information for justification purposes: - New procurement unit price____________________ - Total Price _____________________ - Procurement delivery lead time (PTAT) _________________ days - Award to CAGE _______________ - Inspection & Acceptance CAGE, if not at Award to CAGE _____________ - Cost breakdown requested, including profit rate (if feasible). - Quote expiration date _______________ (90 Days minimum is requested). - Delivery Vehicle (If Delivery Order requested)(e.g. if your CAGE has a current BOA/IDIQ) I. Important Traceability Notice: If you are not the manufacturer of the material you are offering, you must provide an official letter and/or email from the OEM confirming that your company is an authorized distributor of their items. J. Award will be made to the offeror with the lowest price technically acceptable. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the TEST SET SUBASSEMBL . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made. 2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. DRAWING DATA=6511468 |53711| A|FN |D| | | | DRAWING DATA=6511470 |53711| A|FN |D| | | | DRAWING DATA=6511471 |53711| B|FN |D| | | | DRAWING DATA=6511473 |53711| -|FN |D| | | | DRAWING DATA=6511474 |53711| A|FN |D| | | | DRAWING DATA=6511475 |53711| -|FN |D| | | | DRAWING DATA=6511478 |53711| A|FN |D| | | | DRAWING DATA=6511479 |53711| A|FN |D| | | | DRAWING DATA=6511480 |53711| -|FN |D| | | | DRAWING DATA=6511484 |53711| -|FN |D| | | | DRAWING DATA=6511485 |53711| -|FN |D| | | | DRAWING DATA=6511486 |53711| -|FN |D| | | | DRAWING DATA=6511487 |53711| C|FN |D| | | | DRAWING DATA=6511488 |53711| C|FN |D| | | | DRAWING DATA=6511489 |53711| A|FN |D| | | | DRAWING DATA=6511490 |53711| A|FN |D| | | | DRAWING DATA=6511491 |53711| A|FN |D| | | | DRAWING DATA=6511492 |53711| B|FN |D| | | | DRAWING DATA=6511493 |53711| A|FN |D| | | | DRAWING DATA=6511494 |53711| -|FN |D| | | | DRAWING DATA=6511495 |53711| -|FN |D| | | | DRAWING DATA=6511496 |53711| C|FN |D| | | | DRAWING DATA=6511497 |53711| -|FN |D| | | | DRAWING DATA=6511498 |53711| -|FN |D| | | | DRAWING DATA=6511499 |53711| -|FN |D| | | | DRAWING DATA=6511500 |53711| -|FN |D| | | | DRAWING DATA=6511501 |53711| -|FN |D| | | | DRAWING DATA=6511502 |53711| A|FN |D| | | | DRAWING DATA=6511503 |53711| -|FN |D| | | | DRAWING DATA=6511504 |53711| A|FN |D| | | | DRAWING DATA=6511505 |53711| A|FN |D| | | | DRAWING DATA=6511506 |53711| B|FN |D| | | | DRAWING DATA=6511507 |53711| -|FN |D| | | | DRAWING DATA=6511508 |53711| A|FN |D| | | | DRAWING DATA=6511509 |53711| A|FN |D| | | | DRAWING DATA=6511510 |53711| -|FN |D| | | | DRAWING DATA=6511511 |53711| A|FN |D| | | | DRAWING DATA=6511512 |53711| A|FN |D| | | | DRAWING DATA=6511513 |53711| A|FN |D| | | | DRAWING DATA=6511514 |53711| A|FN |D| | | | DRAWING DATA=6511515 |53711| -|FN |D| | | | DRAWING DATA=6511516 |53711| -|FN |D| | | | DRAWING DATA=6511517 |53711| A|FN |D| | | | DRAWING DATA=6511518 |53711| B|FN |D| | | | DRAWING DATA=6511519 |53711| A|FN |D| | | | DRAWING DATA=6511520 |53711| -|FN |D| | | | DRAWING DATA=6511521 |53711| -|FN |D| | | | DRAWING DATA=6511534 |53711| A|FN |D| | | | DRAWING DATA=6511535 |53711| A|FN |D| | | | DRAWING DATA=6511540 |53711| -|FN |D| | | | DRAWING DATA=6511544 |53711| -|FN |D| | | | DRAWING DATA=6511550 |53711| -|FN |D| | | | DRAWING DATA=6511551 |53711| A|FN |D| | | | DRAWING DATA=6511562 |53711| -|FN |D| | | | DRAWING DATA=6511563 |53711| A|FN |D| | | | DRAWING DATA=6511564 |53711| A|FN |D| | | | DRAWING DATA=6511571 |53711| -|FN |D| | | | DRAWING DATA=6511573 |53711| -|FN |D| | | | DRAWING DATA=6511574 |53711| B|FN |D| | | | DRAWING DATA=6511575 |53711| -|FN |D| | | | DRAWING DATA=6511576 |53711| A|FN |D| | | | DRAWING DATA=6511577 |53711| A| |D| | | | DRAWING DATA=6511578 |53711| -|FN |D| | | | DRAWING DATA=6511579 |53711| -|FN |D| | | | DRAWING DATA=6511580 |53711| -|FN |D| | | | DRAWING DATA=6511581 |53711| A|FN |D| | | | DRAWING DATA=6511582 |53711| -|FN |D| | | | DRAWING DATA=6511583 |53711| -|FN |D| | | | DRAWING DATA=6511584 |53711| -|FN |D| | | | DRAWING DATA=6511585 |53711| A|FN |D| | | | DRAWING DATA=6511586 |53711| A|FN |D| | | | DRAWING DATA=6511587 |53711| A|FN |D| | | | DRAWING DATA=6511588 |53711| -|FN |D| | | | DRAWING DATA=6511589 |53711| -|FN |D| | | | DRAWING DATA=6511595 |53711| -|FN |D| | | | DRAWING DATA=6511599 |53711| -|FN |D| | | | DRAWING DATA=6511601 |53711| -|FN |D| | | | DRAWING DATA=6511611 |53711| -|FN |D| | | | DRAWING DATA=6511639 |53711| B|FN |D| | | | DRAWING DATA=6511641 |53711| -|FN |D| | | | DRAWING DATA=6511642 |53711| -|FN |D| | | | DRAWING DATA=6511643 |53711| -|FN |D| | | | DRAWING DATA=6511644 |53711| -|FN |D| | | | DRAWING DATA=6511646 |53711| A|FN |D| | | | DRAWING DATA=6511647 |53711| A|FN |D| | | | DRAWING DATA=6511648 |53711| A|FN |D| | | | DRAWING DATA=6511649 |53711| A|FN |D| | | | DRAWING DATA=6511654 |53711| B|FN |D| | | | DRAWING DATA=6511656 |53711| -|FN |D| | | | DRAWING DATA=6511657 |53711| -| |D| | | | DRAWING DATA=6511658 |53711| -|FN |D| | | | DRAWING DATA=6511660 |53711| A|FN |D| | | | DRAWING DATA=6511661 |53711| -|FN |D| | | | DRAWING DATA=8555045 |53711| A|FN |D| | | | DRAWING DATA=8555046 |53711| B|FN |D| | | | DRAWING DATA=8555047 |53711| A|FN |D| | | | DRAWING DATA=8555048 |53711| -|FN |D| | | | DRAWING DATA=8555049 |53711| -|FN |D| | | | DRAWING DATA=8555050 |53711| -|FN |D| | | | DRAWING DATA=8555051 |53711| -|FN |D| | | | DRAWING DATA=8555052 |53711| -|FN |D| | | | DRAWING DATA=8555053 |53711| -|FN |D| | | | DRAWING DATA=8555054 |53711| -|FN |D| | | | DRAWING DATA=8555055 |53711| -|FN |D| | | | DRAWING DATA=8555056 |53711| -|FN |D| | | | DRAWING DATA=8555057 |53711| -|FN |D| | | | DRAWING DATA=8555058 |53711| -|FN |D| | | | DRAWING DATA=8555059 |53711| -|FN |D| | | | DRAWING DATA=8555060 |53711| -|FN |D| | | | DRAWING DATA=8555061 |53711| -|FN |D| | | | DRAWING DATA=8555062 |53711| A|FN |D| | | | DRAWING DATA=8555063 |53711| A|FN |D| | | | DRAWING DATA=8555064 |53711| -|FN |D| | | | DRAWING DATA=8555065 |53711| B|FN |D| | | | DRAWING DATA=8555066 |53711| A|FN |D| | | | DRAWING DATA=8555067 |53711| -|FN |D| | | | DRAWING DATA=8555068 |53711| A|FN |D| | | | DRAWING DATA=8555069 |53711| -|FN |D| | | | DRAWING DATA=8555091 |53711| -|FN |D| | | | DRAWING DATA=8555093 |53711| -|FN |D| | | | DRAWING DATA=8594833 |53711| E|FN |D| | | | DRAWING DATA=8594958 |53711| F|FN |D| | | | DRAWING DATA=8595294 |53711| -|FN |D| | | | DOCUMENT REF DATA=MIL-STD-129 | | |P |041029|A| |03| DOCUMENT REF DATA=ISO9001 | | | |010417|A| | | DOCUMENT REF DATA=MIL-STD-973 | | | |950113|A| |03| 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The TEST SET SUBASSEMBL furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no. ;53711 8555045; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-129; . 3.3 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.) 3.3.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority. Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below. The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788. Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the Contractor. 3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection. If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part. The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard. If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned. These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements. Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided: Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Quality System Requirements - The supplier shall provide and maintain a quality system acceptable to the Government. The quality system requirements shall be in accordance with ISO 9001. 4.2.1 ;Suppliers currently using and maintaining Inspection System Requirements to MIL-I-45208 are granted permission to utilize this if desired.; 4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.4 Records of Inspection - (This requirement is not applicable to Government Purchase Orders) Records of all inspection work performed by the Contractor, as referenced elsewhere in this contract, shall be kept complete and available to the Government during the performance of the contract and for a period of four years after final delivery of supplies. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVICP-MECH Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from: Commanding Officer NAVICP-MECH Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to NAVICP-MECH.