Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

5.56mm M1042 Loose and M1071 Linked Marking Ammunition for Use in Close Combat Mission Capability Kit

Awarded
W15QKN-26-D-A102Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, specifically the W6QK Acc-Ri-Picatinny office located at Picatinny Arsenal, New Jersey, has issued an award notice for the procurement of 5.56mm M1042 loose and M1071 linked marking ammunition. This equipment is designated for use in the Close Combat Mission Capability Kit. The contract is identified by solicitation number W15QKN-26-D-A102 and was posted on August 25, 2026. This contract was awarded as a sole-source procurement under Title 10 United States Code Section 3204(a)(1) and FAR 6.103-1, as the agency determined that only one responsible source could satisfy the specific requirements. There was no set-aside used for this award. Primary coordination for the contract is handled by Jabrien Urbano and Jennifer Rustwick.

General Info

DoD sole-source contract for 5.56mm marking ammunition for Close Combat Mission Capability Kits.

Agency

Department Of Defense → W6QK Acc-Ri-Picatinny

Contract Value

$257,402,691.08

NAICS

332992 - Small Arms Ammunition Manufacturing

Place of Performance

NJ, GBR

Set-Aside

NONE

Awardee

UTM LIMITED

Award Issued Date

Documents

16

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_01.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_02.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_03.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_04.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_05.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_06.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_07.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010+-+REDACTED_Redacted_Page_08.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_09.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_10.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_11.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_12.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_13.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_14.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_15.jpg

JPG

JA_5.56mm+CCMCK_20260305_W15QKN-26-R-A010-+REDACTED_Redacted_Page_16.jpg

JPG

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny
Contacts2 people available
OfficePICATINNY ARSENAL, NJ, 07806-5000, USA
Organization / AgencyDepartment Of Defense → W6QK Acc-Ri-Picatinny
Office AddressPICATINNY ARSENAL, NJ, 07806-5000, USA
Contacts
Jabrien Urbano
contact@example.gov
+1 (555) 000-0000
Jennifer Rustwick
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

This contract was awarded under Title 10 United States Code (U.S.C.) Section 3204(a)(1); as implemented in FAR 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements.


Similar Contracts

Same NAICS industry code

NAICS: 332992
New
Federal
9mm M1041 Close Combat Mission Capability Kit (CCMCK)
Solicitation # W15QKN27RA009
Solicitation W15QKN27RA009 is a request for proposal issued by the U.S. Army Contracting Command - Rock Island at Picatinny for the procurement of 9mm M1041 Practice Ammunition Cartridges in blue and red. These cartridges are designed for use with the Close Combat Mission Capability Kit (CCMCK) weapon conversion systems for the M9, M11, and M4 Carbine. The government intends to award a single Indefinite Delivery Indefinite Quantity (IDIQ) contract with a minimum guarantee of $130,000 and a maximum ceiling of $26,000,000. The contract structure consists of five one-year ordering periods utilizing Firm Fixed Price delivery orders. The successful contractor must maintain a monthly combined production rate of 500,000 cartridges and adhere to performance specification MIL-PRF-32312 and Drawing Number 13008817. Award will be based on a best-value integrated assessment, prioritizing technical factors, past performance, price, and small business participation in descending order of importance. Technical evaluation includes bid sample testing, manufacturing, quality assurance, and management plans. The contract mandates strict quality and security standards, including ISO 9001:2015 certification, CMMC Level 2 compliance, and adherence to DOD 5100.76-M for the storage and accountability of sensitive Arms, Ammunition, and Explosives. Deliveries are FOB Origin, with inspection and acceptance occurring at both the contractor's facility and the destination at Picatinny Arsenal. Key requirements include the successful completion of First Article Testing and the submission of Measurement System Evaluations for government approval.
W6QK Acc-Ri-Picatinny

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332992
New
SLED
IW269533 - Simunition Rounds
Solicitation # IW269533
The Texas Department of Criminal Justice is soliciting bids under solicitation number IW269533 to establish a purchase order for the procurement of Simunition rounds. This SLED organization opportunity was posted on October 19, 2026, with a response deadline of November 2, 2026, at 9:00 PM. The primary point of contact for this procurement is Cameron Bittick, located in Huntsville, Texas. All bids and inquiries must be handled electronically through the Euna Procurement Bonfire portal. Respondents are required to register on the portal to submit their proposals and receive public notices regarding any amendments. The submission process requires the use of compatible web browsers such as Microsoft Edge, Google Chrome, or Mozilla Firefox, and it is the responsibility of the respondent to ensure all documents are finalized and uploaded before the specified deadline.
Texas Department of Criminal Justice

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332992
New
Federal
Special Ammunition and Weapons Systems (SAWS) - Multiple Award IDIQ Contract Solicitation
Solicitation # SAWS-W519TC26RA036
Army Contracting Command - Rock Island Arsenal and the U.S. Army Product Lead Special Ammunition and Weapon Systems have issued solicitation W519TC26RA036 for the procurement of Special Ammunition and Weapon Systems and non-NATO standard ammunition. This effort supports the Department of War, other U.S. Government agencies, foreign governments, and international organizations by establishing an agile supply chain for non-standard ammunition and select non-standard weapon systems. The government intends to award up to five Firm-Fixed Price Indefinite Delivery Indefinite Quantity contracts. The total potential quantity for the life of the contract is 3,552,685,000 items, with a guaranteed minimum of 1,000 dollars provided through an initial delivery order for a Contract Data Requirements List deliverable. The contract structure consists of five one-year ordering periods. The source selection process utilizes the Highest Technically Rated Offeror approach, which is neither a tradeoff nor a Lowest Price Technically Acceptable method. Offerors are evaluated on their past technical experience using a self-score matrix, with a Minimum Technical Threshold Rating of 12,160 points out of a possible 15,200. While the IDIQ award is based on technical rating and price reasonableness, individual delivery orders will be competed using either Best Value Tradeoff or Lowest Price Technically Acceptable approaches. Due to the non-standard nature of the materiel, contractors are strictly evaluated on their ability to implement rigorous quality control, ballistic testing, and physical inspections, and must comply with ISO 9001-2015 standards. Proposals must be submitted via the PIEE Solicitation Module by October 26, 2026, at 8:00 AM Central Standard Time and must remain valid for 180 calendar days. Submissions are divided into three volumes covering contractual documents, technical proposals, and pricing. Compliance with ITAR, DFARS cybersecurity standards, and FASSCA supply chain risk mitigation is mandatory. All invoicing and payment processing will be conducted through the Wide Area WorkFlow system.
W6QK Acc-Ri

POSTED

4 days ago

DEADLINE

in 6 days
View Details
NAICS: 332992
New
Federal
Skid Steer Attachments SupplierThis subcontract, issued by the Department of Defense for W6QM Micc-Ft Drum, requires the supply of a specific suite of skid steer attachments for prime contractors. The required equipment includes a 1576 mm front bucket with bolt-on teeth, 1220 mm forks, a CVP110 compactor with .24669 lb impulse force, and a 100 mm saw featuring a .23.6 inch cutting depth. All four attachments must strictly adhere to the defined physical and functional characteristics and be delivered to the designated destination. The opportunity is categorized under NAICS code 332992 and was posted on October 15, 2026, with a response deadline of October 22, 2026. Performance for this contract is centered in the 31409 zip code area.
W6QM Micc-Ft Drum

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 332992
New
Federal
9mm M1041 Marking Ammunition Component SupplyThis subcontract, titled 9mm M1041 Marking Ammunition Component Supply, involves the manufacture and delivery of raw components for prime contractors supporting U.S. Army Contracting Command - Rock Island ammunition projects. The scope of work includes the production of brass cases, primers, propellant, and both blue and red marking dye projectiles. All supplied materials must strictly adhere to MIL-PRF-32312 and Drawing 13008817 specifications, ensuring compatibility with Close Combat Mission Capability Kit tolerances. The Department of Defense requires the performing entity to maintain ISO 9001:2015 certification to ensure quality standards for these bulk shipments. This opportunity falls under NAICS code 332992 and is managed by the W6QK Acc-Ri-Picatinny agency. Interested parties must submit their responses by the deadline of November 25, 2026.
W6QK Acc-Ri-Picatinny

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332992
New
Federal
Supply and Assembly of Industrial Sewing Machine Stands/TablesThis subcontract opportunity with the Department of Defense for W6QM Micc-Ft Drum involves the supply and assembly of industrial grade adjustable height tables and stands. The contractor is responsible for providing equipment in dimensions of 48x30 and 60x30 inches. A key requirement of the project is the delivery of turnkey units, which necessitates mounting sewing machines to the stands to ensure all equipment is fully operational and ready for immediate use upon arrival. The project is designated as a total Small Business Set Aside under NAICS code 332992. Performance will take place in zip code 10996. Interested parties should note the response deadline of October 21, 2026, at 9:00 AM.
W6QM Micc-Ft Drum

POSTED

6 days ago

DEADLINE

in about 12 hours
View Details
NAICS: 332992
Federal
Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead
Solicitation # W15QKN-26-X-1CFG
The U.S. Army Contracting Command-Rock Island at Picatinny is conducting market research via a sources sought notice to identify capable industry partners for the production of the Government-developed Shank 2.0 payload, training warheads, and pre-packed anti-personnel warheads for small Unmanned Aerial System platforms. The project requires the manufacture of platform-agnostic payloads utilizing High Voltage Electronic Safe and Arm Device initiation systems, compatible with Low Energy Exploding Foil Initiator or shock tube initiation chains. Training warheads must match the form and weight of live versions using LED simulation, while live warheads must feature qualified high-blast explosives and steel fragmentation packs. All products must integrate with Picatinny CLIK and small Universal Payload Interface design standards. The government is seeking industry capabilities and recommendations to improve the Technical Data Package for producibility, with a specific focus on the ability to scale production to approximately 40,000 systems per month to enhance battlefield effectiveness by 2027. Interested respondents must provide a capabilities statement, Rough Order of Magnitude pricing, and a ramp-up schedule. Due to the nature of the technology, respondents must possess a facility clearance to handle classified material and adhere to strict export control regulations, including the Arms Export Control Act. Required documentation for Technical Data Package access includes DD Form 2345, FCDDAC Form 1350, and a Non-disclosure and Non-Use Agreement. All small business set-aside categories will be considered for this effort.
W6QK Acc-Ri-Picatinny

POSTED

7 days ago

DEADLINE

in 9 days
View Details
NAICS: 332992
Supplier of Ammunition Model D556N9This subcontract involves the procurement and delivery of Model D556N9 ammunition to support prime contractors on Department of Energy projects. The selected supplier is responsible for the full provision of the ammunition, including all necessary packaging, marking, and labeling of hazardous materials in strict accordance with Department of Transportation regulations. All materials must be delivered to the designated receiving facility located in Richland, Washington. To be eligible for the award, contractors must be registered in the System for Award Management and comply with the Buy American Act as specified in FAR 52.225-1. This opportunity falls under NAICS code 332992 and was posted on October 13, 2026, with a response deadline of October 21, 2026.
Department Of Energy

POSTED

8 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 332992
AMMUNITION
Solicitation # 00075068
Hanford Mission Integration Solutions, LLC (HMIS) is soliciting quotes for the procurement of ammunition, specifically model and part number D556N9, to support Prime Contract 89303320DEM000031 with the U.S. Department of Energy, Richland Office. This solicitation, number 00075068, is a set-aside for small businesses, including disadvantaged, women-owned, veteran-owned, service-disabled veteran-owned, and HUBZone small businesses. Award will be granted based on the Lowest Price Technically Accepted (LPTA) criteria, utilizing pass/fail evaluation factors to determine technical acceptability and the lowest overall cost to the buyer. The contract requires strict adherence to FAR 52.225-1 Buy American-Supplies and Department of Transportation regulations for the packaging, marking, and labeling of hazardous materials. Deliveries are to be made to the U.S. Department of Energy C/o HMIS Central Receiving in Richland, Washington, with specific restrictions prohibiting Friday deliveries and requiring advance coordination for special handling. Offerors must be registered in the System for Award Management (SAM) and provide necessary representations and certifications, including an Organizational Conflict of Interest Disclosure Statement. Payment terms are thirty calendar days following the receipt of a proper invoice and acceptance of materials.
Department Of Energy

POSTED

8 days ago

DEADLINE

in about 3 hours
View Details
NAICS: 332992
Federal
9mm AmmunitionThe Federal Bureau of Investigation, under the Department of Justice, has issued a forecast for the procurement of 9mm ammunition. This opportunity is designated as Full and Open/Unrestricted, allowing for competition among all qualified vendors under NAICS code 332992. The performance of the contract is expected to take place at the Quantico Base in Virginia. The forecast was posted on October 11, 2026. Interested parties may coordinate with Kayla Haley as the primary point of contact or Marcia Denise Kirkpatrick for small business specific inquiries. Further details regarding this contracting opportunity can be found through the Department of Justice forecast portal.
Federal Bureau Of Investigation

POSTED

10 days ago

DEADLINE

N/A
View Details
NAICS: 332992
SLED
Ammunition
Solicitation # RFB-26-224
The City of Yuma is soliciting bids under RFB-26-224 for a one-time purchase of various pistol and rifle ammunition, with the possibility of additional purchases over a six-month period if funds become available. The procurement specifically requires newly manufactured 9mm ammunition (124 Grain TMJ, JHP, and FMJ) and .223 rifle ammunition (62 Grain GDSP and 55 Grain FMJ) from specified brands, as equivalents will not be accepted. Remanufactured ammunition is strictly prohibited. Bidders must be authorized to distribute ammunition within the State of Arizona and provide pricing that remains firm and fixed for six months following the notice of award. The contract is subject to a 100,000 dollar informal bid limit, beyond which it must be canceled and formally bid per City Charter. All deliveries must be F.O.B. Destination, with no additional charges for fuel or drop fees allowed. Awards will be granted to the lowest responsive and responsible bidder based on factors including conformity to specifications, delivery capability, and past performance. Bidders must comply with E-Verify requirements, non-discrimination laws, and certify that they are not engaged in a boycott of Israel. Invoices are typically paid within 30 days, and the City strongly encourages ACH enrollment for payment.
City Of Yuma

POSTED

12 days ago

DEADLINE

in 7 days
View Details
NAICS: 332992
SLED
27-493ISP-OPERA-B-54479 | DCI-SOCOM-Training Munitions 1 Year Contract
Solicitation # 27-493ISP-OPERA-B-54479
Solicitation 27-493ISP-OPERA-B-54479 is a one-year contract established by the Illinois State Police Special Operations Command for the as-needed purchase of brand name Ultimate Training Munition (UTM) 5.56mm Man Marker Rounds in red or blue. These munitions are intended to support ISP SWAT operations and tactical training and must meet specific technical standards, including a velocity no greater than 400 feet per second, accuracy within 2 inches at 25 yards, and a non-toxic composition. All deliveries must be made to the Illinois State Police in Springfield, Illinois, within 45 calendar days of order receipt, with the vendor required to agree to partial shipments if total order delays occur. The contract requires vendors to provide detailed specification sheets including brand and model names to ensure compliance with bid requirements. All pricing must be inclusive of shipping and handling charges, and no price increases will be accepted. Payment is governed by the State Prompt Payment Act, and invoices for expenses incurred through June 30 must be submitted by July 31 to avoid legal claims through the Illinois Court of Claims. The agreement is subject to the availability of funds and may be partially or totally funded by federal sources. Additionally, vendors must maintain a Certificate of Insurance naming the State as an additionally insured party and comply with Illinois Equal Opportunity and expatriated entity regulations.
Operations

POSTED

12 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → W6QK Acc-Ri-Picatinny

Same awarding agency

NAICS: 332993
New
Federal
Electronic Safe and Arm Devices (ESAD)
Solicitation # W15QKN27A9999
Ammunition (except Small Arms) Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 423840
New
Federal
Landscaping Material SupplyThis subcontract, managed by the Department of Defense under the W6QK Acc-Ri-Picatinny agency, involves the supply of commercial-grade landscaping materials for prime contractors working on Army National Guard facility projects at the Beaver Falls USARC. The scope of work requires the provision and delivery of fertilizers, mulch, seeds, and soil to ensure the maintenance of healthy grass, trees, shrubs, and plants in accordance with PWS 1.2 and 4.1. All provided materials must adhere to acceptable commercial grade and quality standards. The contractor is responsible for providing the necessary delivery trucks to transport and deliver the specified landscaping materials directly to the USARC site. This opportunity is categorized under NAICS code 423840, with a response deadline set for October 22, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 561730
New
Federal
Seasonal Cleanup and Tree TrimmingThis subcontract, titled Seasonal Cleanup and Tree Trimming, involves providing heavy seasonal debris removal and tree maintenance services for prime contractors at the Beaver Falls USARC Army National Guard facility. The scope of work includes executing spring and fall cleanups, leaf removal, and tree trimming in accordance with specific performance work statement requirements. To successfully deliver debris-free grounds and maintained vegetation, the contractor must provide qualified tree trimmers, chainsaws, and debris hauling trailers. Managed under the Department of Defense via W6QK Acc-Ri-Picatinny, the project falls under NAICS code 561730. All assigned personnel are required to complete AT Level 1 and Level I OPSEC training to ensure compliance with security protocols. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.
Landscaping Services

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 561730
New
Federal
Edging and Retention Pond MaintenanceThis subcontract involves providing precision trimming and edging services for prime contractors at the Beaver Falls USARC Army National Guard facility. The scope of work focuses on maintaining facility perimeters and retention pond areas in accordance with specific performance work statements. To execute these tasks, the contractor must provide all necessary string trimmers, edgers, and specialized safety equipment required for working on slopes and near water. Managed under the Department of Defense via W6QK Acc-Ri-Picatinny, the project requires all personnel to complete AT Level 1 and Level I OPSEC training. The primary objective is the delivery of cleanly edged borders and well-maintained retention pond areas. Interested parties should note the response deadline of October 22, 2026.
Landscaping Services

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 561730
New
Federal
Mowing and Turf MaintenanceThis subcontract for Mowing and Turf Maintenance involves providing routine grass cutting and turf management services for prime contractors at the Beaver Falls USARC Army National Guard facility. The scope of work requires mowing and cutting grass in accordance with PWS 5.4.1 and AR 420-1 standards, which specifically includes the removal of grass clippings using commercial mowers and clipping vacuums. The Department of Defense, through W6QK Acc-Ri-Picatinny, requires all personnel to complete AT Level 1 and Level I OPSEC training to perform the work. Performance success is measured by the delivery of maintained turf areas, which will be verified through the use of monthly inspection checklists. The opportunity is categorized under NAICS code 561730.
Landscaping Services

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program, managed by the U.S. Army Contracting Command – Rock Island at Picatinny, is a solicitation for up to two prototype Other Transaction Agreements (OTAs) under 10 U.S.C. § 4022. The objective is to develop a manufacturable 155mm cargo-carrying artillery projectile system designed to expand domestic manufacturing capacity and modular payload capabilities. The project is structured in two phases: Phase I focuses on projectiles achieving a range of 30 to 35 km, while Phase II targets ranges exceeding 35 km. The prototypes must be compatible with M777A2 Lightweight Towed and M109A7 Paladin 39-caliber weapon platforms, with future adaptability for 52 or 55 caliber systems. Successful prototype completion may lead to a follow-on production contract of up to 10,000 systems per year, supporting a Milestone C production decision by the fourth quarter of FY29. The procurement process involves rigorous technical and administrative requirements, including the submission of a detailed Integrated Master Schedule (IMS) and a cost proposal based on FAR cost principles. Evaluation for Phase I prioritizes the schedule, while Phase II emphasizes technical design and technology maturity. Offerors must certify their business status, specifically regarding nontraditional defense contractor eligibility, and comply with the Buy America Act and National Technology and Industrial Base restrictions. Access to controlled technical data, such as purchase descriptions and drawings, requires the submission of a Non-Disclosure Agreement and a Military Critical Technical Data Agreement. The final response deadline for proposals was extended to October 30, 2026, with submissions required via SAM.gov in specific stand-alone volumes.
Ammunition (except Small Arms) Manufacturing

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 811210
New
Federal
Hexagon Coordinate Measurement Machines (CMM) Preventative Hardware, Software Maintenance and Repair Services to the DEVCOM-AC Quality Engineering & Systems Assurance (QE&SA) laboratory
Solicitation # W15QKN26RA097
The U.S. Army Contracting Command Rock Island at Picatinny is soliciting firm-fixed-price quotes for Hexagon Coordinate Measurement Machine (CMM) preventative hardware, software maintenance, and repair services. This requirement supports the DEVCOM-AC Quality Engineering and Systems Assurance laboratory at Picatinny Arsenal, New Jersey. The procurement is a 100 percent sole source brand-name requirement restricted to Hexagon Metrology Corporation under the authority of 41 U.S.C. 1901. The scope of work includes a one-year Hexagon MyCare Hardware Preventative Maintenance and Calibration Agreement, software upgrades, system calibration, helpdesk support, and a parts blanket for five CMMs and one Portable CMM. The contract structure consists of a 12-month base year with four 12-month option years. Performance includes annual multi-point inspections and calibrations adhering to ISO, ASME, and OSHA standards. Award will be based on a best-value tradeoff evaluation, prioritizing a technical factor comprising technical approach and personnel experience over price. Deliverables include calibration certifications, training materials, and COTS manuals. All work is unclassified, though contractor personnel must complete Anti-Terrorism Awareness Level I training to access the installation.
Electronic and Precision Equipment Repair and Maintenance

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 561730
New
Federal
Grounds Maintenance Services - Cranberry Twp, PA (PA168)
Solicitation # W15QN-27-Q-A010
The U.S. Army Contracting Command New Jersey is seeking information through a Sources Sought Notice for non-personal grounds maintenance services at the Beaver Falls USARC located in Cranberry Township, Pennsylvania. The objective is to maintain a professional appearance for the 99th Readiness Division by managing healthy grass, trees, shrubs, and plants. The scope of work includes maintaining 184,165 square feet of mowed area, 13,410 square feet of trimmed area, 10,950 linear feet of trimmed length, and 1,566 square feet of stormwater area. Services are performed from April through November, with a proposed period of performance consisting of one base year and four twelve-month option periods. The contractor must provide all necessary personnel, equipment, and supervision, adhering to OSHA safety standards and personal identity verification requirements. Performance is monitored via a Quality Assurance Surveillance Plan, and payments are processed through WAWF. To receive payment, contractors must submit monthly invoices accompanied by a signed grounds maintenance inspection checklist and photographs of the service areas taken before and after work. Interested respondents under NAICS code 561730 must provide a capability statement, business size and socioeconomic status, and past performance history to the primary point of contact, Ronald M. Stinson, by the October 22, 2026, deadline.
Landscaping Services

POSTED

4 days ago

DEADLINE

in 1 day
View Details
NAICS: 325920
New
Federal
Pentolite
Solicitation # W15QKN27A1CSD
The U.S. Army Combat Capabilities Development Command Armaments Center is conducting market research to identify manufacturers capable of producing high-grade Pentolite. This sensitive secondary high explosive is required for Naval Ordinance Laboratory Large and Extra-Large Scale Card Gap Tests to meet AOP-7 and DoW specifications. The government is specifically looking for vendors under NAICS 325920 and PSC 1375 who can provide material that exceeds the quality of standard commercial mining and blasting explosives. This sources sought notice is for informational purposes only and does not constitute a formal solicitation or a commitment to award a contract. Interested vendors must be registered in the System for Award Management and are encouraged to submit a capabilities statement including historical performance data, company details, and proof of ability to meet technical specifications. All responses must be submitted electronically to the U.S. Army Contracting Command Rock Island at Picatinny by November 16, 2026.
Explosives Manufacturing

POSTED

5 days ago

DEADLINE

in 27 days
View Details
NAICS: 541380
New
Federal
Ammunition Performance and First Article Testing (FAT)This subcontract, titled Ammunition Performance and First Article Testing (FAT), involves providing independent laboratory testing services for prime contractors working on U.S. Army Contracting Command - Rock Island projects. The scope of work focuses on validating bid samples and production lots for velocity, dispersion, and accuracy through the use of chronographs and ballistic ranges. The contractor must ensure full compatibility with conversion kits for M4, M9, M11, M17, and M18 systems in strict accordance with MIL-A-70625 and MIL-STD-882 standards. Key deliverables for this engagement include the provision of First Article Testing reports and Lot Acceptance Testing certifications. The opportunity is managed under the Department of Defense via the W6QK Acc-Ri-Picatinny agency with a response deadline of November 25, 2026.
Testing Laboratories and Services

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 326199
New
Federal
M2A2 Ammunition Container SupplyThis subcontract involves the manufacture and distribution of M2A2 ammunition containers for prime contractors supporting U.S. Army Contracting Command - Rock Island projects. The scope of work requires the provision of military-spec polymer or metal containers designed for the secure transport of 9mm cartridges, ensuring all products adhere strictly to military packaging specifications and are delivered directly to the prime facility. Managed under the Department of Defense through the W6QK Acc-Ri-Picatinny agency, the opportunity is categorized under NAICS code 326199. The solicitation was posted on October 14, 2026, with a response deadline set for November 25, 2026.
All Other Plastics Product Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS