Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

500 MCM CABLE

Active
SPMYM226Q7669Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, numbered SPMYM226Q7669, is a Small Business Set Aside for the procurement of 500 MCM cable, issued by the Department of Defense through DLA Maritime – Puget Sound in Bremerton, Washington. All submissions must be made electronically via the SAM.gov website, and quotes must be submitted by email to armando.saya@dla.mil no later than August 6, 2026, at 10:00 AM PST to be considered responsive. The contract requires full completion of the solicitation form including accurate contractor information, CAGE code, point of contact, and detailed quotation data. All bids must specify FOB Destination as Silverdale, WA, and include lead time or delivery date along with the manufacturer’s name, address, and country of origin. Compliance with Section K regarding the implementation of FAR 52.204-24 is mandatory, and contractors must indicate applicability of the relevant clauses. Any vendor required to implement NIST SP 800-171 must possess a current assessment no older than three years unless otherwise specified, with Commercial Off The Shelf items exempt provided they are clearly identified during submission. The signed and fully completed solicitation must be returned by the deadline to be eligible for award.

General Info

500 MCM cable procurement, Small Business Set Aside, bid due August 6, 2026, FOB Silverdale, WA, SAM.gov submission required.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

Silverdale, WA, 98383, USA

Set-Aside

SBA

Documents

(1)

SPMYM226Q7669 500 MCM Cable Solicitation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / Agency
Department Of Defense → DLA Maritime - Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts
Armando Saya
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV


ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.


To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)


**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period**



If you are able to provide a quote be sure to provide the following information in the sections provided below: 


  


  1. Page 1 BLK 17a. Provide Contractor's info and cage code. 
  2. Section A. A1 – 1. Enter The Contractor's POC 
  3. Section B. – Enter your Quote and any other info we should know. 
  4. Please quote FOB Destination SILVERDALE, WA. 
  5. Section F. –  Provide the Lead Time and/or Delivery Date. 
  6. Section K. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing 
  7. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes  
  8. Page 1 -  Read box 28 and sign boxes 30 a, b, and c. 
  9. Return the signed and filled out solicitation with your quote by  8/6/2026 10:00AM PST


FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.



EMAIL:  armando.saya@dla.mil

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
RETAINER, ELECTRICAL
Solicitation # SPE7M5-26-Q-0839
The contract pertains to the procurement of 13 electrical retainers with NSN 5935-01-466-5336 under solicitation SPE7M5-26-Q-0839, issued by the Defense Logistics Agency’s Active Devices Division. The delivery is required within 134 days after award, and responses must be submitted by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific requirements include the removal of government identification from non-accepted supplies, physical marking of bare items, and strict adherence to export control regulations under ITAR or EAR, which restrict the disclosure of technical data to foreign persons, regardless of location, and impose obligations on both U.S. and foreign-owned entities. Access to controlled technical data is restricted to contractors authorized by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is designated as Anniston, Alabama, with Andrew Bracken listed as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-Q-1282
The contract is for a specialized electrical cable assembly identified by NSN 6150-01-326-0282, with a requirement for ten units to be delivered within 324 days of award. Technical and quality obligations are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing of solicitation amendments. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific standards. The item includes controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, verified completion of DOD export control training, and formal DLA authorization. Inspection and acceptance occur at origin, non-accepted items must have government identification removed, and physical marking of bare items is required. The solicitation, issued under SPE4A6-26-Q-1282, was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Marcita Robinson as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-12UK
The contract is for the procurement of eight cable assemblies, power, electrical, identified by NSN 5995-01-702-3934, under solicitation SPE4A6-26-T-12UK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 170 days of award, and the solicitation opened on August 5, 2026, with a response deadline of August 13, 2026. The item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking, packaging standards per DLA guidelines, and rules for removing government identification from non-accepted supplies. Inspection and acceptance must occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances tolerated unless otherwise specified, with critical, major, and minor attributes assigned specific verification levels or AQLs. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to authorized parties only—contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval to handle the data. The place of performance is New Cumberland, Pennsylvania, and all technical and compliance obligations are enforced under applicable DFARS provisions including 252.225-7048.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12SN
The contract is for a cable assembly identified by NSN 5995-01-660-3439 and part number WHS-01554, with a quantity of three units, to be delivered under solicitation SPE4A6-26-T-12SN. Delivery is required within 170 days from the award date, with a firm delivery date of January 31, 2027, and an original required delivery date of March 30, 2027. The items must be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as specified. The material has no shelf life restriction but is designated as a critical application item and subject to cybersecurity maturity model certification (CMMC) Level 2 self-assessment requirements. The supplier must adhere to stringent quality assurance protocols, including zero-defect sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise directed, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval is required, and government identification must be removed from non-accepted supplies. The cable assembly is procured under the DoD authorized unit of issue, with pricing and logistics details aligned to the provided purchase request and delivery address at the DLA Distribution facility in New Cumberland, Pennsylvania. Transportation is governed by specific DLA procedural notes, and all work must be performed by a certified supplier, Crystal Group, Inc., with full compliance expected across cybersecurity, packaging, marking, and inspection standards. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, under a federal acquisition framework with NAICS code 335931.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE7M2-26-Q-0722
This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 and part number MS21004-4, with a total quantity of 684 packing groups, each equivalent to 100 units, for a total of 68,400 individual terminals. The item is designated as a commercial item and is subject to qualification through the Qualified Products List or Qualified Manufacturers List. Technical compliance is governed by SAE AS21004F Revision F dated 12/01/2023 and SAE AS7928 Revision C dated 05/01/2019, with configuration changes requiring formal Engineering Change Proposal requests. The product must be free from intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents, and all exempt items must meet stringent containment and shock-proofing standards per NAVSEA 5100-003D. Delivery is set for 167 days after contract award, with FOB origin and inspection and acceptance points at destination. Pricing is firm fixed, with zero tolerance for quantity variance. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging requirements, including use of approved materials, methods, and marking in accordance with MIL-STD-129 and ISO/IEC 16388 barcoding standards. The item is classified as critical application and subject to covered defense information protocols. The contract specifies the DLA distribution facility in New Cumberland, Pennsylvania, as the delivery point and includes detailed transportation protocols under DLAD Proc Notes C19 and C20. The solicitation, issued by the Department of Defense’s Nuclear Reactor Program, was posted on August 5, 2026, with responses due by August 12, 2026, and the material is required for delivery no later than April 6, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M5-26-T-368G
The contract is for the procurement of five cartridge fuses with NSN 5920-01-646-3582 under solicitation SPE7M5-26-T-368G, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after contract award, and responses must be submitted by August 17, 2026. The solicitation is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The alternate offeror must provide a complete data package including detailed information for both the approved and alternate parts. The place of performance is listed as FPO with zip code 96694, and the primary point of contact is Matthew Stanko, reachable via email and phone provided. The NAICS code 335931 indicates classification under Electrical Equipment and Component Manufacturing, and no set-aside type is specified. All government identification must be removed from non-accepted supplies per applicable regulations.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7LX-26-U-9315
The contract is for a Battery Power Supply identified by NSN 6130-01-609-5744 and part number OFM-2060-A1, with a quantity of 40 units issued as individual items (EA). It is classified as a commercial item and designated as a critical application item, requiring strict compliance with DLA packaging and quality standards. All procurement must adhere to MIL-STD-2073-1E for packaging, including preservation method 41, and marking must follow MIL-STD-129 with no special marking requirements. The item must be delivered FOB origin within 127 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Sampling and quality verification must comply with MIL-STD-1916 or an equivalent zero-based plan, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise specified. The contract is under DLA Direct, CONUS coverage and is issued under solicitation SPE7LX-26-U-9315 with a response deadline of August 20, 2026, and is governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-Q-1281
This contract is for a single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-496-5544, with a delivery deadline of 220 days after contract award. The technical and quality requirements governing this item are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The assembly must comply with DLA packaging standards, require removal of government identification from non-accepted supplies, and be physically marked per specified identification protocols. Components within the assembly must be sourced from qualified manufacturers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and procurement must adhere to the referenced procurement note H02. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Zero non-conformances are required unless otherwise stated, and manufacturers may choose either attribute or variable inspection methods under MIL-STD-1916. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 is applicable. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and prior authorization from DLA. The solicitation was issued on August 5, 2026, with responses due by August 20, 2026, under solicitation number SPE4A6-26-Q-1281, managed by the Department of Defense’s ASC Commodities Division, and point of contact is Marcita Robinson.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335931
New
Federal
HEX RECT ASSY
Solicitation # SPRMM126QKG70
This contract pertains to the procurement of a HEX RECT ASSY under emergency acquisition authority, with all contractual documents considered issued upon electronic transmission or mail delivery. The item must be manufactured to exact specifications defined by MIL-STD-130 for marking and MIL-I-45208 for quality inspection, with ISO 9001 certification accepted as an alternative. The contractor must be the original equipment manufacturer or an authorized distributor, with clear identification of the OEM via CAGE code and part number; refurbished materials are strictly prohibited. All items must be mercury-free and free from contamination, with any intentional use of mercury requiring prior written approval and a warning plate. Inspection is required at the source, and the supplier must maintain a government-acceptable quality system, with records retained for four years post-delivery. Packaging must comply with MIL-STD-2073, and no changes to design, material, or production site are permitted without formal written approval and a $250 administrative cost reduction. The contract mandates use of WAWF for invoice and receiving report submission, and compliance with CMMC Level 1 cybersecurity self-assessment. Award will be granted based on the Lowest Price Technically Acceptable method, with all proposals subject to strict technical compliance. The contractor must provide an email for communication and is strongly encouraged to register for EDA via PIEE to receive automated notifications of contract actions. The solicitation prohibits distribution of Navy-provided documents without proper Distribution Statement compliance, with specific controls for NoFORN and Export Controlled data. Small business representation is required under NAICS code 335931, and additional deviations apply for annual certifications and cybersecurity. Deliveries must align with specified timelines, and failure to disclose exceptions in EDI submissions will result in award based solely on solicitation terms. Any post-award changes will incur cost deductions. The procurement is managed by DLA Mechanicsburg, and all vendor interactions must conform to the detailed quality, traceability, and security protocols outlined throughout the contract.
SPRMM1 DLA Mechanicsburg

POSTED

about 8 hours ago

DEADLINE

in 3 months
View Details
NAICS: 335931
New
Federal
61--POWER SUPPLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPB79
The contract pertains to the repair or modification of a power supply under solicitation number N0038326QPB79, issued by the Naval Supply Systems Command Weapon Systems Support office in Philadelphia, Pennsylvania. The opportunity is open for response until August 24, 2026, and is classified under NAICS code 335931, indicating it relates to electrical equipment manufacturing. Key contractual clauses include mandatory use of Workflow Pro Assist Module for payment processing, compliance with the Buy American Act and related free trade agreements, and adherence to security prohibitions and equal opportunity requirements for workers with disabilities. Warranty provisions mandate a 12-month coverage period with a 60-day window following defect discovery for claims. Inspection and acceptance procedures are strictly defined, and the use of Wide Area Workflow for invoice and receiving report submission is required. The contract also enforces mandatory national defense priority ratings and prohibits certain classified or restricted information disclosures under Department of Defense deviations. The point of contact for this solicitation is Jason J. Sklencar, reachable via email at jason.j.sklencar.civ@us.navy.mil and phone at 771-229-0565, with supplemental contact information listed as 215-697-4179. Payment and documentation must comply with Navy-specific financial protocols, including the use of invoice and receiving report combos as directed in the Schedule. Compliance with the Alternate A annual representations and certifications is required, and royalty obligations are governed by longstanding provisions. The contract applies to all noncomplex supplies with specific valuation and identification requirements, and all offerors must ensure alignment with the Navy’s AbilityOne support contractor policy and the full suite of federal acquisition regulations governing national defense procurement. No place of performance details are specified beyond the issuing office’s location.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in 3 minutes
View Details
NAICS: 335931
New
Federal
CABLE ASSEMBLY
Solicitation # N0010426QEC99
The contract pertains to the procurement of a cable assembly under solicitation N0010426QEC99, issued by NAVSUP Weapon Systems Support Mech, with a response deadline of September 4, 2026. It invokes a comprehensive set of technical, quality, and administrative requirements, including mandatory compliance with the Individual Repair Part Ordering Data (IRPOD) available on the BPMI site, which serves as the primary reference for technical specifications, drawings, and standards. The contract enforces strict order of precedence for document conflicts, with amendments and the schedule taking priority over specifications and referenced standards. Contractors must adhere to the exact revision levels of cited documents unless written approval is obtained for deviations, and any non-conformance must be declared in advance with technical justification and supporting data. Packaging must meet MIL-PRF-23199 and MIL-STD-2073 standards, with cleanliness controls applied per MIL-STD-767 and MIL-STD-2041, though fire retardant materials are no longer required. The use of mercury or mercury compounds is strictly prohibited. Quality assurance is governed by the IRPOD, requiring contractors to maintain inspection records accessible to the government throughout and after performance. All contractual documents are considered issued upon electronic transmission, and pricing is valid for 60 days post-closing unless otherwise stated. The contract mandates use of Wide Area Workflow for invoice and receiving report submissions and requires compliance with cybersecurity maturity certification, veteran and disability equal opportunity provisions, small business representations, and security prohibitions. Data deliverables must follow DD Form 1423 formats with specified distribution statements, submission frequencies, and approval codes, and a Certificate of Compliance per DI-MISC-81356 must be submitted with each delivery. The NAICS code 335931 classifies this procurement under other electrical equipment and component manufacturing, and the point of contact is designated for technical inquiries.
Navsup Weapon Systems Support Mech

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
International
Procurement of CABLE ASSEMBLY, POWER, ELECTRICAL
Solicitation # W8486-270955/A
The Department of National Defence is seeking proposals for 400 power electrical cable assemblies, identified by GSIN 6150 and NSN 6150-01-022-6004, with part number 11682336-1 or an acceptable equivalent, manufactured by NCAGE 19207. Each of the 200 units is to be delivered to either 25 CFSD Montreal at 6363 Rue Notre Dame St E, Montreal, QC H1N 2E9, or 7 CFSD Edmonton at 195 Ave & 82nd St, Building 236, Edmonton, Alberta T5J 4J5. Offerors must explicitly provide the part number and manufacturer NCAGE, and if proposing an equivalent or substitute product, must specify the brand name, model, part number, and NCAGE of the alternative. This procurement is conditionally reserved for Aboriginal businesses under the federal government’s Procurement Strategy for Aboriginal Business, and interested parties must comply with the requirements outlined in Annex 9.4 of the PWGSC Supply Manual. The solicitation, numbered W8486-270955/A, was posted on August 5, 2026, with a response deadline of September 3, 2026, and all submissions must be received by 8:00 PM Eastern Time. The Crown reserves the right to negotiate with any supplier, and documents may be submitted in either English or French. Primary contact for inquiries is Emma Wood, Contracting Authority, reachable via email at emma.wood@forces.gc.ca or phone at 343-616-1706.
Department of National Defence

POSTED

about 15 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 332999
New
Federal
HANEL LEAN LIFT CABINET (SOLE SOURCE)
Solicitation # SPMYM226Q7575
This solicitation, designated SPMYM226Q7575, is a sole source procurement by DLA Maritime - Puget Sound for a Hanel Lean Lift Vertical Lift Module, model 2860-825/281/320/75/650/40, to be delivered and installed as a turn-key system at Naval Base Kitsap-Silverdale, Washington. The requirement includes not only the equipment itself but also full installation, connection to utilities, relocation of interfering electrical conduits and lighting, up to 100 feet of new conduit and wiring with an appropriate breaker, operational testing, and comprehensive personnel training. The contract further mandates the delivery of supplemental data packages including repair manuals, NRTL certification documentation, and warranty terms as defined in Exhibits A, B, and C, all subject to firm fixed pricing. Delivery is required by August 14, 2026, with FOB destination terms applying, and all shipments must comply with ASTM-D-3951 packaging standards, using heat-treated wood pallets where applicable, while strictly prohibiting materials such as asbestos, excelsior, and loose fill polystyrene. Marking of all containers must include the NSN or part number, noun nomenclature, quantity, contract number, and contractor information, with legibility ensured through any method. Proposals must be submitted electronically to Tricia Wintersteen at tricia.wintersteen@dla.mil and must include a completed and signed solicitation, manufacturer identification, country of origin, and precise lead time quoted FOB destination. Offers are evaluated as technically acceptable before price competitiveness is considered, with technical and past performance combined as approximately equal in weight to cost or price. The system must meet NFPA, NEMA, and ANSI standards, including NEMA-MG1 for motors and ASTM E-84-10m fire-retardant coating ratings. The contractor is responsible for all inspections and quality control, with final acceptance contingent upon satisfactory installation, testing, and government approval; non-conforming items may lead to rejection of the entire lot. A three-year warranty commencing at acceptance is required, and all warranty service must be performed by a factory-authorized distributor. Cybersecurity requirements mandate NIST SP 800-171 compliance and a current assessment unless the item is identified as COTS, in which case an exemption must be claimed and substantiated during bidding. Contractors must also comply with FAR and
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334111
New
Federal
PRINTERS, HP
Solicitation # SPMYM226Q7872
This solicitation, numbered SPMYM226Q7872, is a total small business set aside under FAR Parts 12 and 13.5 for the procurement of HP printers, issued as a firm fixed-price supply contract with FOB Destination delivery to Bremerton, WA 98314. All proposed items must be brand name or equal as defined by FAR 52.211-6, and offerors are required to submit a standalone spec sheet in PDF format with their bid package; failure to include this document will result in the rejection of the offer. Pricing must be provided on a unit price line-item basis, and only fully completed quotes with all required representations, certifications, manufacturer information, and signed original solicitation documents will be considered. Offerors must be currently registered in SAM.gov and must submit all required materials by the deadline of August 7, 2026, at 5:00 PM ET; late submissions will not be accepted. The procurement is restricted to small businesses, and proposals offering less than the entire requirement will be deemed unacceptable. All questions must be submitted via email to the designated point of contact, and it is the offeror’s responsibility to download the RFQ and regularly monitor for any amendments.
Electronic Computer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
Federal
DUCT FLEXIBLE
Solicitation # SPMYM226Q7888
This solicitation, identified as SPMYM226Q7888, seeks quotes for FLEXIBLE DUCT under a Small Business Set Aside designation, with the North American Industry Classification System code 326220, issued by the Department of Defense through DLA Maritime - Puget Sound in Bremerton, Washington. All responses must be submitted electronically via email to karl.lindley@dla.mil by Sunday, 28 September 2025 at 7 AM, and must include a fully completed and signed solicitation form to be considered responsive. Quotations must reflect FOB Destination Bremerton, WA, and include contractor information, point of contact details, manufacturer data, lead time or delivery date, and compliance with specific clauses such as 52.204-24 and 52.209-11. Contractors must also indicate whether any items are Commercial Off The Shelf, which exempts them from NIST SP 800-171 requirements, and provide supporting documentation to the contracting officer during submission. Any contractor subject to NIST SP 800-171 must have a current assessment on file, not older than three years unless otherwise specified. All solicitations and amendments are posted exclusively on SAM.gov, and submissions must adhere strictly to the format and instructions provided to qualify for award.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

1 day ago

DEADLINE

in about 5 hours
View Details
NAICS: 423830
New
Federal
Procurement of Commercial Off-The-Shelf CNC Desktop MillThe contract is for the sole-source acquisition of a commercial off-the-shelf CNC desktop mill from HAAS Automation Inc., procured through its authorized distributor, Phillips Corp. No customization, integration, or installation services are required, as the equipment is a standard product intended for immediate use. The procurement is classified as a subcontract under NAICS code 423830, which corresponds to industrial machinery and equipment merchant wholesalers. The acquisition is being managed by DLA Maritime - Puget Sound, a unit of the Department of Defense, with the place of performance located in Silverdale, Washington, 98315. The solicitation was posted on August 3, 2026, and the response deadline is August 6, 2026, at 5:00 a.m. This indicates a limited window for vendor response, consistent with a streamlined sole-source process. The contract does not include any set-aside provisions, and no point of contact details are provided in the data. The equipment will be delivered directly to the specified location without additional service requirements, reflecting a straightforward commercial transaction for a standardized industrial machine.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 611430
New
Federal
Equipment Training ServicesThe contract entails the delivery of on-site training services for the operation and maintenance of a newly installed waterjet machining center, ensuring personnel are fully proficient in its use and upkeep. Training must be conducted at the specified location in Silverdale, Washington, with a zip code of 98315, and is classified as a subcontract under NAICS code 611430, indicating educational support services. The solicitation was posted on August 3, 2026, with responses due by August 7, 2026, at 5:00 PM, emphasizing a short and time-sensitive procurement window. The contracting entity is DLA Maritime - Puget Sound under the Department of Defense, reflecting the defense-related nature of the equipment and training requirements. All work must be performed on-site at the designated facility, and no alternative locations are permitted under the terms of this agreement.
Professional and Management Development Training

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 561990
New
Federal
Warranty Performance ReportingThe contract pertains to the preparation and submission of warranty performance reports and terms in strict compliance with DI-SESS-81639A, requiring precise documentation and adherence to specified standards for warranty-related data reporting. It is classified as a subcontract under NAICS code 561990, indicating it involves other support services, and is issued by DLA Maritime - Puget Sound under the Department of Defense. The work must be performed at a designated place of performance located in Silverdale, WA, with a zip code of 98315, and all deliverables must be submitted by the response deadline of August 7, 2026, at 5:00 PM ET. The solicitation was posted on August 3, 2026, and although no point of contact is listed, interested parties can access further details through the provided SAM.gov link. There is no set-aside type designated, and no specific organization type is identified for this opportunity.
All Other Support Services

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 541330
New
Federal
Technical Data Package (TDP) DevelopmentThe contract requires the development and submission of a complete Technical Data Package aligned with DI-SESS-80776, including all necessary documentation to achieve NRTL certification. This effort is critical to ensuring compliance with specified technical and safety standards for the delivered systems or components. The work must be completed and submitted by the deadline of August 7, 2026, with proposals due no later than 5:00 PM Eastern Time. The contract is structured as a subcontract under NAICS code 541330, indicating it falls under engineering services, and the place of performance is designated as Silverdale, Washington, with a ZIP code of 98315. The contracting activity is managed by DLA Maritime - Puget Sound, under the U.S. Department of Defense, and the solicitation was posted on August 3, 2026. No set-aside preferences or organization type restrictions are specified, making it open to eligible subcontractors regardless of size or status. The technical deliverable is the sole focus, with no mention of additional services or deliverables beyond the fully documented TDP and associated certification materials.
Engineering Services

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 541921
New
Federal
Technical Data and COTS Manuals ProductionThe contract requires the production of commercial-off-the-shelf (COTS) operation, maintenance, and repair manuals aligned with DI-TMSS-80257C and applicable military data standards, ensuring technical documentation meets Department of Defense requirements for usability, accuracy, and compliance. The work is scoped to deliver fully compliant manuals that support the lifecycle management of military equipment, with strict adherence to standardized formats and data structures mandated by military technical documentation protocols. This subcontract is issued by DLA Maritime - Puget Sound under the NAICS code 541921, with performance expected to occur in Silverdale, WA, 98315. The opportunity was posted on August 3, 2026, and responses are due by August 7, 2026, at 5:00 PM. While no set-aside designation or point of contact is specified, the nature of the work suggests a need for experienced technical documentation contractors capable of integrating military-specific requirements into COTS-generated documentation without deviation from approved standards.
Photography Studios, Portrait

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 238290
New
Federal
Rigging and Machine Installation ServicesThe contract entails the complete disassembly, removal, rigging, transportation, and installation of a new waterjet machining center in accordance with detailed technical specifications. All work must be performed with precision to ensure the integrity and functionality of the equipment during every phase, from dismantling at the source to final setup at the designated location. The project requires specialized expertise in heavy machinery handling and compliance with industry-standard safety and engineering protocols to meet the operational requirements of the end user. This subcontract opportunity is issued by DLA Maritime - Puget Sound under the Department of Defense and is classified under NAICS code 238290 for other heavy and civil engineering construction. The place of performance is clearly identified as Silverdale, Washington, with a zip code of 98315. The solicitation was posted on August 3, 2026, and responses are due by August 7, 2026, at 5:00 PM. Potential bidders must be prepared to demonstrate capability in executing complex equipment relocation projects with no margin for error, as failure to meet technical or schedule requirements could impact critical defense operations.
Other Building Equipment Contractors

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 333514
New
Federal
Waterjet Machining Center Supply and DeliveryA水jet machining center is being procured under a subcontract to meet stringent technical specifications, including compliance with NRTL certification and full supply chain traceability. The equipment must be delivered to Silverdale, WA, with a response deadline of August 7, 2026, and the solicitation was posted on August 3, 2026. The procurement is overseen by DLA Maritime - Puget Sound under the Department of Defense, aligned with NAICS code 333514 for metal cutting machine tool manufacturing. All components and materials must adhere to traceability standards to ensure authenticity, quality, and regulatory compliance throughout the supply chain, with no exceptions permitted for certification or performance criteria. The contract specifies delivery to a defined location and requires complete adherence to federal procurement standards for defense-related technical equipment.
Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 333517
New
Federal
DESKTOP LATHE AND MILL
Solicitation # SPMYM226Q7799
This solicitation, numbered SPMYM26Q7799, seeks quoted bids for a DESKTOP LATHE AND MILL from contractors responding to the U.S. Department of Defense through DLA Maritime - Puget Sound. All solicitation details and amendments will be posted exclusively on SAM.gov, and electronic quote submissions are required through the same platform. Bids must be submitted via email to diana.baldwin@dla.mil by Wednesday, August 5, 2026, at 10 a.m. PST, and must include a fully completed and signed solicitation form to be deemed responsive. The contract requires quotes to be furnished FOB Destination Silverdale, WA, with clear lead times or delivery dates provided. Contractors must supply complete information including their CAGE code, point of contact, manufacturer details, country of origin, and compliance with applicable FAR clauses such as 52.204-24 and 52.212-3. Contractors subject to NIST SP 800-171 cybersecurity requirements must have a current assessment on file, no more than three years old, unless otherwise specified. However, items classified as Commercial Off The Shelf (COTS) are exempt from this requirement, and bidders must explicitly identify and provide documentation for any COTS items during submission. All mandatory fields must be completed on the solicitation form, including Section K for manufacturer data and Section F for delivery timelines. Failure to sign boxes 30a, 30b, and 30c on page one, or to accurately complete any designated section, will render the bid non-responsive. The deadline for response is August 6, 2026, at 5 a.m. PST, and the NAICS code for this procurement is 333517, indicating the procurement falls under precision instrument and equipment manufacturing.
Machine Tool Manufacturing

POSTED

2 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333517
New
Federal
WATERJET MACHINING CENTER (SOLE SOURCE)
Solicitation # SPMYM226Q7742
The solicitation for a WATERJET MACHINING CENTER is a sole source opportunity issued by DLA Maritime - Puget Sound under solicitation number SPMYM26Q7742, with a posting date of August 3, 2026, and a firm response deadline of August 7, 2026, at 5:00 PM Eastern Time. Bids must be submitted via email to TRICIA.WINTERSTEEN@DLA.MIL and must include a completed and signed solicitation, manufacturer information, country of origin, and lead time for delivery quoted FOB destination. Items classified as Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 compliance requirements, but bidders must clearly identify and provide supporting documentation to the contracting officer during the solicitation period. For non-COTS items, contractors must have a current, valid assessment under DFARS 252.204-7019, not older than three years, unless a shorter period is specified. The place of performance is in Silverdale, Washington, with the contracting office located in Bremerton, WA. This procurement does not utilize any set-aside provisions and falls under NAICS code 333517. All details and amendments will be publicly accessible via the SAM.gov website.
Machine Tool Manufacturing

POSTED

2 days ago

DEADLINE

in 2 days
View Details