Top

51 -- 5120-01-501-3306

Active

6FEP-5120-01-501-3306Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

This contract covers the supply of seven pneumatic lifting bag kits, each including specific components such as air lifting bags, relief valves, multi-colored air hoses, and a controller, identified under the Paratech Inc part number 889360. Each item must be permanently marked with the manufacturer's part number and name or symbol. Packaging must follow standard commercial practices, with unit packages packed securely in fiberboard boxes meeting freight classification standards. All packages and loads are to be marked and prepared for either civilian or military delivery following designated federal standards. Palletization requirements specify using 48 by 40-inch four-way entry pallets made with bark-free lumber, with maximum height and weight restrictions differing based on the distribution center, either 2,500 pounds for the Eastern Distribution Center or 2,000 pounds for the Western Distribution Center. Load stability, stacking strength, and load balancing are emphasized to prevent damage during transport. Partial pallet loads under half a pallet must only be top-loaded unless balanced. Shipments to EU countries must comply with specific regulations concerning non-manufactured wood packaging to meet European Commission emergency measures as well as Department of Defense guidelines for distribution. Contact for the contract is provided through the named contract specialist for further queries.

General Info

Supply of seven pneumatic lifting bag kits with specific packaging, marking, and palletization requirements.

Agency

N/A

NAICS

332212 - Hand and Edge Tool Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 22

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyN/A

Contacts1 person available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Ann C. CooperContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

5120-01-501-3306 UI: KT PNEUMATIC BAG, LIFTING: Qty 7, DESCRIPTION Jack, air bag lifting kit. Contains: 2-888190 air lifting bag, KPI-44,2-890490 relief valve inline,1-890516 16 foot long red air hose,1-890900 controller with dual 16 foot long black hose,1-890515 16 foot long yellow air hose, Paratech Inc Part Number 889360 ITEM MARKING - Mark each item in a permanent and legible manner with manufacturer's part number and name or identifying symbol. PACKAGING - Packaging in accordance with standard commercial practice. PACKING - The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200, or ECT 32. MARKING - All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129P, dated 15, December, 2002, as applicable. PALLETIZATION - Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe). Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15.

Similar Contracts

Same NAICS industry code