Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

51--GUN,SEALANT,20 OUNC

Active

N0010426QAD20Federal

Response Deadline10/02/2026, 04:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This presolicitation, issued by the Department of Defense under Navsup Weapon Systems Support Mech, seeks the procurement of 10 units of 20-ounce sealant guns identified by NSN 6X-5130-LWW013658. This requirement is for spare part replenishment under a Foreign Military Sales agreement, with the final destination to be provided upon request. The contract is designated as a total Small Business Set Aside. Quotes must be submitted by October 2, 2026, and must include F.O.B. Destination pricing, adherence to MIL-STD packaging and labeling, and provision for Government Source Inspection. The primary point of contact for this solicitation is Joshua Martin, based in Mechanicsburg, Pennsylvania.

General Info

DoD seeks 10 sealant guns for FMS; Small Business Set Aside; due 10/2/2026.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation

PostedSep 1

Presolicitation

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 04:00:00 AM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

JOSHUA MARTIN

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

NSN 6X-5130-LWW013658, TDP VER 012, QTY 10 EA, FMS REQUIREMENT - DESTINATION WILL BE FURNISHED UPON REQUEST. Spare part replenishment. SBSA. NSN: 6X 5130 LWW013658 UNIT OF ISS: EA ITEM NAME: GUN,SEALANT,20 OUNC CLIN QTY: 10 Quote must include 1.) F.O.B. Destination 2.) MIL-STD Packaging/labeling3.) Government Source Inspection

Similar Contracts

Same NAICS industry code

MOUNT, RESILIENT, WEAPON SYSTEM

Solicitation # SPE4A7-26-R-0744

This solicitation, identified as SPE4A7-26-R-0744, is issued by the Department of Defense through the ASC Supplier OE and AF Div for the procurement of a weapon system resilient mount, identified by NSN/Part Number 5342-00-598-8824. The request falls under NAICS code 332994 and was posted on September 1, 2026, with a response deadline of October 1, 2026. The contract includes strict compliance requirements regarding the use of foreign-flag vessels for sea transportation, noting that failure to provide required representations on final invoices may lead to rejection. Additionally, the agreement incorporates value engineering provisions, encouraging the contractor to submit change proposals to achieve acquisition savings in exchange for incentive sharing. Subcontractors are also subject to specific flow-down requirements based on the simplified acquisition threshold.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Bird/Wildlife Aircraft Strike Hazard equipment

Solicitation # FA480326Q0113

The Department of Defense, specifically the FA480 20 Cons Lgca office at Shaw Air Force Base in South Carolina, is seeking sources for Bird/Wildlife Aircraft Strike Hazard equipment for AFCENT. This procurement opportunity, identified by solicitation number FA480326Q0113, is categorized as a sources-sought notice under NAICS code 332994. The contract is designated as a total small business set-aside. Interested parties must submit their responses by September 4, 2026, at 5:00 PM. Primary coordination for this requirement is managed by Uriah Hinton and SSgt Shaun Gann.

FA4803 20 Cons Lgca

POSTED

about 15 hours ago

DEADLINE

10--FEEDER,AUTOMATIC GUN

Solicitation # SPE7L126T05X1

DLA Land And Maritime is soliciting quotes for the procurement of one automatic gun feeder, identified by NSN 1005017160963. The approved source for this item is 8KP69 465-9830-5. The item must be delivered to W6DX CPE GCP WARREN within five days after the order is placed. This opportunity, solicitation number SPE7L126T05X1, is a total small business set-aside under NAICS code 332994. Interested parties must submit electronic quotes by the deadline of September 14, 2026. All specifications and solicitation details are available exclusively online via the provided link, as hard copies and separate drawings are not available.

DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L526T5290

DLA Land And Maritime is seeking quotes for the procurement of 24 plungers under NSN 1045010775523. This combined solicitation, numbered SPE7L526T5290, is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332994. The items are to be delivered to DLA Distribution within 63 days after the order is received. Interested and responsible sources must submit their quotes electronically by the deadline of September 14, 2026. All solicitation documents, including digitized drawings and military specifications, are available exclusively online via the provided link or the DIBBS portal. Inquiries regarding this requirement should be directed to the buyer via the specified electronic contact channels.

DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE7M226T6631

The Department of Defense, through DLA Land and Maritime, is seeking quotes for the procurement of 2,602 corrosion prevention anodes under solicitation number SPE7M226T6631. This requirement is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 332994. The items are to be delivered to DLA Distribution San Joaquin within 140 days after the order is placed. Interested and responsible sources must submit their quotes electronically by the deadline of September 14, 2026. The solicitation is available as an RFQ via the provided digital links, and all technical drawings or military specifications must be retrieved electronically. Inquiries regarding this procurement should be directed to the buyer via the DIBBS portal.

DLA Land And Maritime

POSTED

about 15 hours ago

DEADLINE

INL Kyiv Ammunition

Solicitation # 191NLE26Q0132

The Bureau of International Narcotics and Law Enforcement Affairs is seeking a contractor to provide high-quality ammunition to support partner nation police units. The requirement includes 3,000,000 rounds of 5.56mm 62gr M855 green tip ammunition, 1,000,000 rounds of 9mm 124 GR FMJ M882, and 2,500,000 rounds of M855 62 gr linked ammunition. All products must be new, manufactured to US Military specifications, and compatible with M4 Patrol rifles and duty handguns. Contractors must provide ISO 9001:2008 certification and testing documentation to ensure reliability and accuracy for life-threatening encounters. Delivery is set as FOB Origin, with items to be picked up by the State Department Freight Forwarder within 270 days of the contract award. This opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses. Evaluation will be based on technical specifications, delivery timelines, export compliance experience, and past performance specifically regarding deliveries to Ukraine, in addition to the overall price.

Acquisitions - Inl

POSTED

about 15 hours ago

DEADLINE

Supply of Breather Valve Cap (NSN: 5340992152876)This subcontract, issued by the Department of Defense under the Land Supply Chain agency, requires the supply and delivery of one Breather Valve Cap with National Stock Number 5340992152876. The procurement falls under NAICS code 332994 and mandates strict adherence to military specifications, OEM traceability, and domestic sourcing requirements. The performance location for this contract is in Billings, Montana. Interested parties must submit their responses by September 11, 2026, with the expectation that the item be delivered within five days of the order placement.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of NAS1834C3K460 Panel Fasten InsertThis subcontract involves the manufacture and delivery of 16 units of the NAS1834C3K460 Panel Fasten Insert for the Department of Defense, specifically through the ASC Commodities Division. As a critical application item, the components must strictly adhere to military and aerospace specifications to ensure operational safety and performance. The procurement is categorized under NAICS code 332994. The solicitation was posted on August 31, 2026, with a response deadline of September 8, 2026. Interested parties can find further details and submission guidelines via the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Gearshaft SupplyThe Department of Defense, through the Land Supply Chain agency, is seeking a subcontract for the supply of one precision spur gearshaft under NSN 3040012160944. The required component must meet strict military specifications and can be provided as either a manufactured part or a sourced commercial item. This procurement falls under NAICS code 332994. The solicitation was posted on August 31, 2026, with a response deadline of September 11, 2026. The place of performance is designated as FPO 96657. Interested parties can find further details and submission guidelines via the provided DIBBS link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Nonmetallic Hose (NSN 4720-01-481-4267)This subcontract involves the supply of 35 units of nonmetallic hose under NSN 4720-01-481-4267 for the Department of Defense, specifically the Maritime Supply Chain ESOC Buys. The contractor must ensure all items are compliant with military packaging, labeling, and delivery standards. The project falls under NAICS code 332994 and will be performed in Herlong, zip code 96113-5520. The opportunity was posted on August 31, 2026, with a response deadline of September 11, 2026. Interested parties can find further details and submission guidelines through the provided DIBBS link.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Manufacturing of Non-Aircraft Gas Turbine NozzleThe Department of Defense, through the ASC Supplier Oper OEM Division, is seeking a subcontractor for the precision manufacture of a single high-specification turbine nozzle, part number 3846578-1. This component is intended for non-aircraft gas turbine applications and must be produced in strict accordance with military quality and documentation standards. The procurement is categorized under NAICS code 332994 and will be performed in Cherry Point. Interested parties must submit their responses by September 8, 2026, following the posting date of August 31, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacture and Supply of Valve Bracket (NSN: 5342011264051)This subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, requires the manufacture and supply of four machined metal brackets for valve assemblies. The parts must comply with National Stock Number 5342011264051 and adhere to all military specifications regarding packaging, marking, and delivery. The contractor is responsible for sourcing or manufacturing the NSN-compliant components and ensuring delivery FOB Origin within five days. The opportunity was posted on August 31, 2026, with a response deadline of September 8, 2026, falling under NAICS code 332994.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

44--BUNDLE ASSY

Solicitation # N00104-26-R-TB95

Solicitation N0010426RTB95, issued by NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania, is a rated order for the manufacture and procurement of a Bundle Assembly (NSN 3HM 4420-01-667-3937). The item must adhere to the material and physical requirements specified in ILCX3 D-17503-11PC2 and be physically identified according to MIL-STD-130, Rev N. Award consideration is limited to authorized distributors of the original equipment manufacturer, who must provide proof of authorization on company letterhead. The government will award the contract based on the best value, evaluating proposals through a combination of price, past performance, and risk assessments via the Supplier Performance Risk System. The contract mandates strict quality assurance and packaging standards, requiring compliance with MIL-STD-2073 and MIL-STD-129. Inspection and acceptance will occur at the origin, and the contractor must maintain inspection records for 365 days following final delivery. Payment and invoicing must be processed through the Wide Area Workflow system. Key regulatory requirements include adherence to the Buy American program, safeguarding of covered defense information per DFARS 252.204-7012, and compliance with DPAS priority ratings. Offers are due by 4:00 PM local time on September 24, 2026.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 15 hours ago

DEADLINE

48--VALVE W/ACTUATOR,4"

Solicitation # N0010426RED94

This firm fixed price contract is for the procurement of a 4 inch valve with actuator under NAICS code 332919. The agreement specifies that the contractor must adhere to strict quality assurance standards, including the mandatory review of Individual Repair Part Ordering Data and the submission of first article testing and inspection reports. All reports of test and inspection must be submitted electronically via the Wide Area Workflow platform, and the contractor is prohibited from intentionally adding mercury or mercury containing compounds to the hardware. The contract establishes a clear order of precedence for technical documentation, prioritizing contract amendments and schedules over technical drawings and specifications. It requires the submission of pre manufacturing procedure packages within 45 days of award and mandates that all deliverables comply with specific distribution statements to protect sensitive information. Packaging must follow MIL-PRF-23199 and MIL-STD 2073 standards, and the government maintains the right to perform inspections at the source or destination.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # N0010426QNC90

This contract pertains to the procurement of a 1/2 inch socket weld in-line stop valve with backseat, per NAVSHIPS drawing 803-2177525, for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the vessel. The material is designated as SPECIAL EMPHASIS (Level I) and is subject to stringent traceability, quality assurance, and inspection controls. All components must meet exacting material specifications including ASTM-A105, ASTM-A182, ASTM-A193, ASTM-A194, and MIL-S-24093, with mandatory certification of chemical composition, mechanical properties, and heat treatment for each heat lot. The valve must undergo comprehensive non-destructive and pressure testing, including liquid penetrant or magnetic particle inspection on studs and nuts, dye penetrant inspection of hardfacing, and full assembly pressure testing with strict tolerances. First Article Testing is required on one unit, and contractor certification must include traceable, unqualified statements of compliance verified by electronic signatures meeting strict authentication protocols. Every part requires permanent, legible traceability marking conforming to MIL-STD-792, with unique lot identification preserved throughout all manufacturing and subcontracted operations. The contract mandates strict adherence to a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or an approved alternative under MIL-I-45208 and MIL-STD-45662, with full government inspection authority at source. All welding and brazing must be performed per S9074-AQ-GIB-010/248 or 0900-LP-001-7000, with procedures and qualification data submitted for prior approval. Subcontractors are bound by the same requirements and must be pre-qualified by the prime contractor. All certifications, including those for hydrogen embrittlement relief, filler metal, and hardfacing, must be complete, signed, and traceable to individual components. Material must be 100% inspected for traceability, conformity, and documentation accuracy, with zero defect acceptance criteria for lot acceptance. The valve must be marked with the prescribed CID number, and no mercury or mercury-containing compounds may be present. The contract is issued under Emergency Acquisition Flexibilities, is DO certified under DPAS for national defense use, and

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

CONE AND ROLLERS,TA

Solicitation # N0010425QBL43

Solicitation N00104-25-Q-BL43 is a small business set-aside procurement issued by the Navsup Weapon Systems Support Mech office for the manufacture and design of Cone and Rollers, TA (NIIN 012448327). The item is designated as a commercial COTS item, and the requirements are fully described by part number 42376-20024. The contract includes a delivery date extended to July 2, 2026, and requires the submission of a Certificate of Compliance per DI-MISC-81356 at the time of material delivery. The procurement incorporates various federal and defense regulations, including the Buy American-Free Trade Agreements and strict cybersecurity requirements under DFARS 252.204-7012. Quality assurance is managed through a Government-acceptable inspection system, with specific inspection and acceptance protocols defined by DD Form 250 codes. Packaging must adhere to MIL-STD-2073-1, with additional cleanliness controls following MIL-PRF-23199 and MIL-DTL-24466 for heat-sealed envelopes. Evaluation of offers includes a 10 percent price evaluation preference for HUBZone small business concerns.

Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

66--LIQUFIER MODULE, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RTB77

The contract pertains to the acquisition of two Liquidifier Modules, specifically for repair or modification purposes, identified by NSN 7H-6680-016695055-CP with Technical Data Package Version 001. Delivery is FOB origin, and the Government does not hold the data rights necessary to source this part from alternate suppliers. It has been determined that acquiring the underlying data or rights is uneconomical, as is the process of reverse engineering the component. This procurement is being conducted under a sole-source authority per FAR Overhaul 6.103-1, with no requirement for competitive bidding. Although the notice invites interested parties to express capability or submit proposals, this is strictly a presolicitation notice and not a request for competitive offers. The Government retains full discretion to proceed without competition based on responses received. Market research has confirmed that commercial acquisition policies under FAR Part 12 will not be applied. All technical documentation such as military specifications and qualified product lists can be obtained through the DODSSP portal or ASSIST-Quick Search, though proprietary drawings, patterns, and deviation lists are not available through these channels. The contracting activity is managed by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with Tyler Curfman as the primary point of contact. Responses must be submitted by August 31, 2026, and no set-aside provisions apply.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # N0010426QEF40

This solicitation, issued by the Navsup Weapon Systems Support Mech for the procurement of fuse boxes, is a fixed-price contract focused on the delivery of hardware and associated technical data. The agreement mandates strict adherence to technical documentation, including Individual Repair Part Ordering Data (IRPOD) and specific military standards for packaging and cleanliness. It establishes a clear order of precedence for document conflict resolution, prioritizing contract amendments and schedules over general technical specifications. Key requirements include a mandatory vendor review of the IRPOD and a prohibition on the use of mercury in any supplied hardware. The contract specifies detailed quality assurance protocols, requiring a Certificate of Compliance upon delivery. Pricing for quotations remains valid for 60 days after the closing date. Additionally, the contract incorporates various federal mandates, including small business set-asides, cybersecurity maturity model certification, and equal opportunity regulations.

Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

COMMS BAR BASE ASSY

Solicitation # N0010426QYAFP

This solicitation from the Navsup Weapon Systems Support Mech is for the repair of the COMMS BAR BASE ASSY. The contract requires the vendor to provide an estimated repair price and then submit a firm-fixed price quote within 90 days of receiving the carcass after a teardown and evaluation. The requested repair turn around time is 180 days, and failure to meet this timeline will result in a per-unit price reduction. The award will be DO certified for national defense under the Defense Priorities and Allocations System. Key requirements include strict adherence to mercury-free standards for use on submarines and surface ships, with contamination being grounds for rejection. The contractor must follow MIL-STD-130 for marking and MIL-STD-2073 for packaging. If the offeror is not the original equipment manufacturer, they must provide a signed letter of authorization. The government reserves the right to exercise an option for increased quantity within 365 days of the award.

Bare Printed Circuit Board Manufacturing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QFF45

This contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.

POSTED

about 15 hours ago

DEADLINE

58--COVER,SHIPS GONG

Solicitation # N0010426QUC21

This solicitation is for the procurement of 17 units of Ships Gong Covers, part number 7538385, for the Department of Defense. The contract requires the awardee to be an authorized source, specifically noting that Cage Code OHM39 is currently the only approved source of supply. The material specifications for this item are classified as Secret, necessitating that the contractor maintain a Government Security Clearance and adhere to the security requirements outlined in DD Form 254. Key technical requirements include serialization in accordance with specific Navy instructions, adherence to MIL-STD packaging and marking standards, and the maintenance of an inspection system compliant with ISO 9001. The contractor must perform 100% production electrical and workmanship testing, providing reports to the program manager while ensuring classified data is removed to prevent accidental disclosure. All freight is FOB Origin, and the procurement is subject to IUID requirements and Buy American certifications.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

61--CAPSTAN VAR SP CTRL

Solicitation # N0010426QYAGT

This solicitation is for the manufacture and procurement of Capstan Variable Speed Controls for the Department of Defense, specifically through the Navsup Weapon Systems Support Mech. The contract is a total small business set-aside and requires the awardee to be either the Original Equipment Manufacturer or an authorized distributor with a signed letter of authorization. Key requirements include adherence to ISO 9001 quality systems, strict mercury-free material standards for use on submarines and surface ships, and compliance with MIL-STD-129 for marking and MIL-STD-973 for configuration management. The government requires source inspection and has designated the order as DO certified under the Defense Priorities and Allocations System. A one-year warranty is required from the date of delivery. Additionally, the government retains a bilateral option to increase the order quantity by up to 100% at the same price for 365 days after the award. All proposals must include unit pricing, total price, and procurement turnaround time.

Motor and Generator Manufacturing

POSTED

about 15 hours ago

DEADLINE

CORD STRAIN RELIEF

Solicitation # N0010426QAC86

This solicitation is for the manufacture of Cord Strain Relief parts, specifically NAVSEA P/N 5677521-101, adhering to the specifications in drawing 5677521 Rev B. The contract requires the items to be manufactured according to the standards of Remke Industries, Inc. and mandates compliance with various military standards for marking, configuration control, and packaging, including MIL-STD-130 and MIL-STD-2073. Government source inspection per FAR 52.246-2 is required, and the delivery timeframe is set at 90 days. The procurement is managed by the Navsup Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania, with a quote due date of September 9, 2026. This is a total small business set-aside under NAICS code 333998. Key administrative requirements include the use of the Wide Area Workflow for payments and adherence to cybersecurity maturity model certification level requirements. All contractual documents are considered issued upon electronic transmission or mail delivery.

POSTED

about 15 hours ago

DEADLINE

CABLE ASSY LAUNCHER

Solicitation # N0010426QNE33

This solicitation is for the manufacture of Cable Assembly Launchers for submarine outboard use, governed by the Department of Defense and Navsup Weapon Systems Support Mechanicsburg. The contract requires strict adherence to technical drawings and the NAVSEA S9320-AM-PRO-020/MLDG molding manual, necessitating that the vendor be PRO-020 certified. Key technical requirements include hydrostatic testing, mercury-free material compliance, and specific cable jacket adhesion testing for arctic neoprene materials. The procurement process involves rigorous quality assurance, including the submission of a Quality Conformance Test Plan and mandatory First Article Testing (FAT) witnessed by the government for non-qualified sources. All delivered units must include a Test Inspection Report and a Certificate of Conformance. The contract is designated as a DO-rated order for national defense under the Defense Priorities and Allocations System and requires the use of Wide Area Workflow (WAWF) for payments and reporting.

Other Communication and Energy Wire Manufacturing

POSTED

about 15 hours ago

DEADLINE