Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COVER, ACCESS

Active
SPE7LX-26-U-9445Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7LX-26-U-9445 is an Indefinite Delivery Contract issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 25 access covers (NSN 5340-01-610-0210). This is a total small business set-aside under NAICS code 332722, with a contract ceiling of 350,000 dollars. The delivery requirement is specified as 116 days after delivery order, with FOB Origin terms. Inspection and acceptance are conducted by the government at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 for labeling and bar-coding, and ASTM D3951 for non-hazardous materials. Hazardous materials must comply with FED-STD-313 and OSHA Hazard Communication Standard 29 CFR 1910.1200. Invoicing must be processed electronically through Wide Area WorkFlow. Key compliance requirements include DFARS regulations regarding the prohibition of hexavalent chromium, safeguarding covered defense information per NIST SP 800-171, and restrictions on covered defense telecommunications equipment. Proposals must be submitted via the DLA-BSM Internet Bid Board System by August 25, 2026.

General Info

25 access covers for small businesses, indefinite delivery, $350K cap, two annual orders, CONUS/OCONUS shipping, electronic quotes only

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

SBA

Documents

(1)

RFQ SPE7LX-26-U-9445 for Indefinite Delivery Contract

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
COVER,ACCESS
COVER,ACCESS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 5340-01-610-0210 Quantity: 25 EA Purchase Request: 1000239517QTY: 25 Delivery: 116 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-15KX
This contract is for the procurement of 26 machine screws, identified by NSN 5305009399256 and part number MS35275-251. The items must be manufactured in accordance with the current revision of the NASM35275 standard and are classified as critical application items. Delivery is required within 171 days, with a final required delivery date of March 24, 2027, shipped FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to quality and technical requirements, including MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging processes.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-15CW
This contract is for the procurement of 209 shoulder screws, identified by NSN 5305-01-179-7460 and Avibank Mfg. Inc. part number 18-53301. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The delivery timeline is set for 171 days after order, with an original required delivery date of December 6, 2026, and a need ship date of February 7, 2027. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Inspection and acceptance will occur at the point of origin, and the contract specifies a zero percent quantity variance for the order.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, RECESSED
Solicitation # SPE4A5-26-T-343J
This contract is for the procurement of 30 recessed washers, identified by NSN 5310014476251 and Bell Textron part number 140-007-41S34-2. The order is managed under solicitation SPE4A5-26-T-343J with a required delivery date of April 21, 2027, and a delivery window of 171 days. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Notably, item unique identification is not required for this order, and the material has no shelf life requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-171U
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 81 gaskets under National Stock Number 5330-01-547-5509. The contract requires delivery within 98 days after the order is placed, with performance located in New Cumberland, Pennsylvania. The procurement is categorized under NAICS code 332722 and is managed by primary point of contact Michael O'Connor. The items must strictly adhere to DLA packaging and quality requirements, including MIL-STD-130N for identification marking of U.S. military property. A critical material restriction is in place prohibiting the use of asbestos as defined in FED-STD-313. The solicitation period runs from August 11, 2026, to August 24, 2026, under solicitation number SPE7L3-26-T-171U.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-15JX
This solicitation is for the procurement of 23 shear bolts under contract number SPE4A6-26-T-15JX for the Department of Defense. The items must be manufactured according to current military or consensus non-government part standards, with a delivery requirement of 164 days after receipt of order. The procurement is fully competitive and requires adherence to specific DLA technical and quality requirements, including packaging standards and the removal of government identification from non-accepted supplies. Key compliance mandates include physical identification and bare item marking per MIL-STD-130N and the submission of a Certificate of Quality Compliance. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, because the manufacturing of these items may involve casting or forging, contractors are advised that the government may not provide the necessary special tooling and should seek assistance through the appropriate DLA channels if required.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-T-15AH
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-15AH, is for the procurement of 2,499 close tolerance screws, identified by NSN 5305-01-581-5555. The contract requires delivery within 171 days after the order is placed and falls under NAICS code 332722. Performance is designated for Jacksonville, Florida. The agreement is subject to strict technical and quality requirements as defined in the DLA Master List. Furthermore, the item contains technical data governed by ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-26-T-15GL
This contract is for the procurement of eight setscrews under NSN 5305000617627, identified by part numbers 25704-281200-22-0 from Krauss-Maffei Wegmann GmbH Co. and M70FS518-5C from Nylok LLC. The delivery is required within 20 days of order, with a required delivery date of August 14, 2026. Shipping is FOB Origin and destined for the Ordnance Readiness Development Center in Nantou County, Taiwan. The agreement specifies that no approved technical data package is currently available as the data is proprietary or insufficient for competitive procurement. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129. The contract incorporates DLA master list requirements, specifically referencing packaging standards RP001 and the removal of government identification from non-accepted supplies under RQ011.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE4A6-26-T-15BE
This contract is for the procurement of 24 lock washers under solicitation number SPE4A6-26-T-15BE for the Department of Defense. The items are identified by NSN 5310-99-969-5461 and are associated with part numbers from Ametek Airtechnology Group Limited and Iveco Defence Vehicles S.P.A. Delivery is required within 171 days, with a need ship date of February 7, 2027, and a final required delivery date of February 22, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Inspection and acceptance will occur at the destination. Additionally, the contract incorporates requirements for the removal of government identification from non-accepted supplies and the physical marking of bare items.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, PANEL FASTENER
Solicitation # SPE4A6-26-T-15FF
This contract is for the procurement of 341 panel fastener screws, identified as commercial off the shelf items under NSN 5305016172761. The items are associated with part number 4020513002K and are sourced from suppliers including Schneider Electric USA, Dominion Electric Supply Company, and W.W. Grainger. The delivery is required within 171 days, with a need ship date of February 7, 2027, and a required delivery date of February 5, 2027. The shipment is designated as FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements RP001. The contract is subject to specific technical and quality requirements, including RA001 and RQ011, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-15KC
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 749 shear bolts under NSN 5306-01-298-0146. The contract is fully competitive and adheres to specific military and federal specifications. Delivery is required within 164 days after the order is placed, with the place of performance located in Tracy, California. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Additionally, the contract notes that covered defense information potentially applies. Interested parties must respond by August 19, 2026, in accordance with the guidelines set forth in the DLA Master List of Technical and Quality Requirements.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW ASSEMBLY, PANE
Solicitation # SPE4A6-26-T-15DT
This contract, identified as solicitation SPE4A6-26-T-15DT, is for the procurement of 117 units of a panel screw assembly, part number CA28075-12HS, manufactured by Howmet Global Fastening Systems Inc. The item is associated with NSN 5305-01-354-8061 and is being acquired by the Department of Defense through the ASC Commodities Division. Delivery is required within 171 days, with a final required delivery date of August 30, 2027, and shipping is set as FOB Origin. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. A critical quality requirement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging, except where functionally required by specific NAVSEA standards. The goods are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT
Solicitation # SPE4A6-26-T-14XG
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of 755 bolts under NSN 5306-01-078-4969. The contract requires adherence to DLA packaging requirements and technical standards found in the DLA Master List. Delivery is expected within 171 days after receipt of order, with the place of performance located in Tracy, California. Quality assurance is governed by specific sampling methods, including MIL-STD-1916 or ASQ H1331, with strict requirements for zero non-conformances in sample lots. The contract mandates the removal of government identification from non-accepted supplies and prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Physical identification and bare item marking are also required for the supplied hardware.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 336390
New
DIBBS
BELT, RIBBED
Solicitation # SPE7LX-26-U-9539
Solicitation SPE7LX-26-U-9539 is an Indefinite Delivery Contract issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of ribbed belts, specifically NSN 3030015756383 and Daimler Truck North America part number 01-32069-000. The requirement is for an estimated quantity of 42 units with a maximum contract value of 350,000.00 dollars. This is a total small business set-aside under NAICS code 336390. Delivery is required within 59 days after the date of order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and labeling. Special requirements include the submission of Safety Data Sheets and hazard warning labels per 29 CFR 1910.1200 for any hazardous materials, as well as mandatory notifications for radioactive materials. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Proposals are due by August 25, 2026, and must be submitted via the DLA Internet Bid Board System.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326220
New
DIBBS
BELT, POSITIVE DRIVE
Solicitation # SPE7LX-26-U-9538
Solicitation SPE7LX-26-U-9538 is a Total Small Business Set-Aside issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of positive drive belts, identified by NSN 3030-01-563-8491. This is a Unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000 dollars. The estimated annual quantity is 393 units, with a guaranteed minimum of 58 units upon activation. Delivery is required within 59 days after receipt of order, with FOB Origin terms and inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment and storage marking. Special requirements include the removal of government identification from non-accepted supplies and compliance with hazardous material labeling under 29 CFR 1910.1200. All payment requests and receiving reports must be processed electronically through Wide Area Workflow. Proposals must be submitted via the DLA Internet Bid Board System by August 25, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED WAS
Solicitation # SPE7LX-26-U-8824
The contract encompasses the procurement of a NUT, PLAIN, EXTENDED WASHER, HEXAGON with NSN 5310016137050 under solicitation SPE7LX-26-U-8824, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is structured as an Indefinite Delivery Contract (IDC) with an estimated quantity of 347 units, though this quantity is non-binding and subject to order issuance by the IDC. Delivery is FOB origin within 58 days after order date, with inspection and acceptance occurring at the destination point. All items must be packaged in compliance with ASTM D3951, with precedence given to the DLA Master List of Technical and Quality Requirements where applicable. Packaging and marking must strictly conform to MIL-STD-129, including barcoding, unit of issue and quantity per unit pack labeling, and palletization as per RP001 DLA Packaging Requirements. Hazardous materials, if any, must be labeled in accordance with 29 CFR 1910.1200 and accompanied by compliant Safety Data Sheets, and contractors must disclose and submit hazard warning labels for any materials not exempted under specified federal statutes. The contract mandates electronic invoicing through WAWF and requires full compliance with applicable FAR clauses including employment equity, trafficking in persons, eligibility verification, and sustainable product requirements, all governed by a deviation applicable throughout the solicitation period. The solicitation, posted on July 14, 2026 and with responses due by July 29, 2026, is administered through the DIBBS portal and references the DLA Master Solicitation for Automated Simplified Acquisitions. Offerors must provide their Unique Entity Identifier and CAGE code and represent their size status and socioeconomic designations, including HUBZone, WOSB, SDVOSB, or SDB status if applicable, with joint ventures required to disclose partner UEIs and submit supporting agreements. While no unit price is specified in the CLIN, the contract imposes a maximum value of $350,000.00. The contract includes multiple FAR clauses related to compliance, labor, and safety, with deviations applied uniformly across key provisions including Equal Opportunity for Workers with Disabilities, Combating Trafficking in Persons, and Employment Eligibility Verification. The contractor must ensure all packaging and labeling comply with military standards, and must maintain ongoing adherence to hazard
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9546
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 3,396 gaskets under part number 5330-01-423-1506. The contract is designated as a total small business set-aside under NAICS code 339991. Delivery is required within 97 days after receipt of order. The items must strictly adhere to federal standards prohibiting the use of asbestos as defined in FED-STD-313. Compliance with DLA master lists for technical and quality requirements is mandatory, specifically regarding packaging requirements and the removal of government identification from non-accepted supplies. The solicitation was posted on August 11, 2026, with a response deadline of August 26, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9543
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 26 gaskets under National Stock Number 5330-01-551-7113. The contract requires delivery within 118 days after order and mandates that all supplied items be completely free of asbestos. Any alternative materials must be approved according to specific contractual clauses. The items must adhere to strict packaging and quality standards, including DLA packaging requirements and the removal of government identification from non-accepted supplies. Because the materials are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 specifications. These requirements apply to all shipment types, including direct vendor delivery and foreign military sales.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
FILTER, FLUID
Solicitation # SPE7LX-26-U-9022
The contract is for the procurement of 228 fluid filters with NSN 2940-01-559-1820 under an indefinite-delivery contract (IDC) issued by the Defense Logistics Agency through solicitation SPE7LX-26-U-9022, with responses due by August 10, 2026. The contract operates under a maximum value ceiling of $350,000, though no firm quantity or unit price is established, making all purchases contingent on future delivery orders. Performance is governed by FOB Origin terms, requiring delivery within 62 days after order placement, with acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-129 for labeling and barcoding, ASTM D3951 for packaging, and RP001: DLA Packaging Requirements, with all hazardous materials labeled in compliance with 29 CFR 1910.1200 and any applicable federal statutes. The contractor is obligated to submit hazard warning labels and material safety data sheets for approval prior to award. Multiple FAR and DFARS clauses are incorporated, including those addressing combating trafficking in persons, employment eligibility verification, cybersecurity safeguards per NIST SP 800-171 and FAR 52.204-7012, prohibition of hexavalent chromium, export-controlled items, and restrictions on use of covered defense telecommunications equipment. The contract mandates electronic invoicing through Wide Area WorkFlow and requires compliance with DoD payment systems. Offerors must certify their small business status, including any joint venture structure, and provide Unique Entity Identifiers and CAGE codes for all parties. Compliance with whistleblower protections, anti-arbitration provisions, and safeguarding of government information is required. No formal attachments are listed, and all referenced standards are incorporated by reference. Evaluation criteria and basis of award are not specified, and the contracting officer and contracting officer’s representative contact details will be finalized upon issuance of the award.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9547
This contract is for the procurement of 46 plain seals, identified by NSN 5330-01-513-4551 and part number MID 7 511X561X22 from Kingsbury Inc. The solicitation, numbered SPE7LX-26-U-9547, is a Women-Owned Small Business set-aside issued by the Department of Defense Strategic Acquisition Program Directorate. Delivery is required within 97 days from the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, specifically requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Additionally, the contract prohibits the use of asbestos and the intentional addition of mercury or mercury-containing compounds. All identification marking must comply with MIL-STD-130N and MIL-STD-129.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336390
New
DIBBS
WEIGHT, WHEEL BALANCING
Solicitation # SPE7LX-26-U-8669
This contract specifies the procurement of wheel balancing weights composed of 1.5 ounces of steel with a PFE150 coating, packaged in boxes of 25 units. The item is identified by NSN 2530-01-559-8956 and is supplied by Hennessy Industries, LLC under part number 5523200150. The contract requires full compliance with the DLA Master List of Technical and Quality Requirements, which govern all technical, quality, and packaging standards. Packaging must adhere to DLA-specific guidelines including MIL-STD-129 for marking and labeling, and RP001 for procurement packaging, with materials shipped FOB origin under a zero variance quantity tolerance. The unit of issue is a box, with a contracted quantity of 14 boxes, and delivery is required within 46 days. Inspection and acceptance both occur at the destination, and any hazardous material handling must comply with Fed-Std-313 and TQ requirement IP025, otherwise commercial packaging per ASTM D3951 applies—though DLA requirements supersede ASTM. Sampling and quality verification follow MIL-STD-1916 or ASQ Z1.4 with zero non-conformances required unless otherwise stated, and attributes are classified with strict AQL levels. The contract prohibits intentional use of mercury or mercury compounds in the product unless explicitly exempted for specific functional components such as batteries, sensors, or instruments, and any portable mercury-containing devices must include a secondary containment as mandated by NAVSEA 5100-003D. All packaging must be palletized in accordance with DLA standards, and government identification must be removed from non-accepted supplies. The contract is issued under solicitation SPE7LX-26-U-8669 with no set-aside designation and falls under NAICS code 336390 for other transportation equipment manufacturing.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
DIBBS
PACKING WITH RETAIN
Solicitation # SPE7LX-26-U-9545
This contract, identified as SPE7LX-26-U-9545, is a solicitation for the procurement of 139 units of NSN 5330012120126, designated as a critical application item. The requirement specifies a delivery timeframe of 120 days with FOB Origin shipping and destination-based inspection and acceptance. The procurement is a total small business set-aside under NAICS code 326220 and is managed by the Department of Defense Strategic Acquisition Program Directorate. The agreement mandates strict adherence to technical and quality requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Specific packaging instructions require the use of medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Additionally, the contract prohibits the use of asbestos and requires compliance with DLA packaging requirements for procurement and hazardous materials shipping standards.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
GASKET
Solicitation # SPE7LX-26-U-9544
This contract is for the procurement of 696 gaskets, identified by NSN 5330015017156 and part number 5000-30401 from HDT Expeditionary Systems Inc. The delivery is required within 97 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The items must adhere to strict material and packaging standards, specifically prohibiting the use of asbestos and the intentional addition of mercury. Due to the risk of ultraviolet ray deterioration, the gaskets must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. All packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7LX-26-U-9541
This contract is a solicitation for the procurement of seven cable assemblies, identified by NSN 6150-01-679-4652 and Daimler Truck North America part number A66-06600. Issued by the Department of Defense under the Strategic Acquisition Program Directorate, the requirement is a total small business set-aside with a delivery timeline of 34 days after receipt of order. The terms specify FOB Origin delivery with inspection and acceptance occurring at the destination. The procurement is governed by the DLA Master List of Technical and Quality Requirements, specifically referencing standards for physical identification, government identification removal, and packaging. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in sample lots unless otherwise specified.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
DOOR, VEHICULAR
Solicitation # SPE7LX-26-U-9542
This contract, identified as solicitation SPE7LX-26-U-9542, is for the procurement of 11 vehicular doors, specifically part number 49342 from TLD Wollard LLC. The requirement is listed under NSN 2510-01-656-5904 and is designated as a total small business set-aside. The delivery timeline is set for 89 days after the order, with shipping terms established as FOB Origin and both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with specific requirements for palletization and arrow-up marking. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that any government identification must be removed from supplies that are not accepted. The procurement is managed by the Strategic Acquisition Program Directorate within the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details