Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

HINGE, ACCESS DOOR

Active
SPE7M4-27-T-1367Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M4-27-T-1367 is a total small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of 17 access door hinges, identified by NSN 5340-00-602-4581. The contract requires adherence to specific technical drawings, including 81205 BAC5710, 81205 BAC5040, and 81205 BSPS13-Q02. Delivery is required within 70 days, with terms set as FOB Origin and the place of performance located at Tinker AFB, Oklahoma. Inspection and acceptance will occur at the destination. The contract incorporates stringent regulatory requirements, including ITAR and EAR export controls for technical data, and mandates CMMC Level 2 certification for third-party assessment. Compliance with the Buy American Act and Berry Amendment is required, with specific prohibitions against the use of Class I ozone-depleting chemicals and hexavalent chromium. Packaging must follow RP001 and MIL-STD-129 standards, and all invoicing must be processed electronically through the Wide Area WorkFlow system. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized.

General Info

Small business contract for 17 access door hinges delivered to Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

SBA

Documents

1

RFQ SPE7M4-27-T-1367

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION
Office AddressUSA
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HINGE,ACCESS DOOR
HINGE,ACCESS DOOR
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5340-00-602-4581 Quantity: 17 EA Purchase Request: 7017440003QTY: 17 Delivery: 70 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
Federal
SPE4A727R0022 - 5342 - COUPLING, CLAMP, GROOVED / WSIC F
Solicitation # SPE4A727R0022
The Defense Logistics Agency Weapons Support is conducting market research via a Sources Sought Notice to identify capable providers for grooved clamp couplings, identified by NSN 5342-010461421. This effort will result in an Indefinite Quantity Contract under NAICS code 332510. Current approved sources include Eaton Aeroquip LLC, Voss Industries LLC, and Grimes Aerospace Company. The government is using this process to determine whether the procurement will be set aside for small businesses or opened for full and open competition, with the possibility of multiple awards. Interested parties must submit their organization's contact details and tailored capability statements to Thuy Ho by October 6, 2026. The government will evaluate submissions based on the provider's capacity to scale services, financial and technical resources, and project management capabilities. Companies seeking to become an approved source must submit an application through the Source Approval Request Program via the DLA Aviation Small Business Office. This notice is for market research only and does not constitute a formal request for proposals.
DLA Aviation

POSTED

about 4 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332510
New
DIBBS
53--LOCK SET,RIM
Solicitation # SPE7L1-27-U-0089
Solicitation SPE7L1-27-U-0089 is a request for a unilateral Simplified Indefinite-Delivery Contract (SIDC) for the procurement of 20 rim lock sets, identified by NSN 5340016786303. The requirement is managed by the DLA Weapons Support Land Supply Chain and falls under NAICS code 332510. The items must comply with basic specification FF-L-2890C Revision C and reference specification QPL-FF-L-2890-5 Revision 5. Because this is a Qualified Products List (QPL) item, the manufacturer must be approved by the Performance Review Institute at the time of the contract award. Delivery is required within 14 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must adhere to RP001 and MIL-STD-129, with non-hazardous materials following ASTM D3951. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. The government will award the contract to a responsible offeror whose quote conforms to the terms and conditions, with a submission deadline of October 30, 2026, via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
Manufacturer of Inner Bearing Rings (NSN 3110-01-065-9772)This subcontract involves the manufacture and supply of 156 precision-machined inner bearing rings, identified by Part Number MS51962-7 and NSN 3110-01-065-9772, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Performance will take place in Cherry Point, and all products must be manufactured in accordance with the DLA Master List of Technical and Quality Requirements. The selected provider must utilize precision machining equipment and strictly adhere to DFARS 252.225-7016 domestic sourcing regulations. Additionally, the contractor is required to maintain CMMC Level 2 certification and hold a quality management system certification in either SAE AS9003 or ISO 9001.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacture of Headed Straight Pins (NSN 5315-12-324-2779)This subcontract involves the manufacture of 41 certified headed straight pins, identified by NSN 5315-12-324-2779, for prime contractors delivering to DLA distribution centers. The production process requires the use of precision heading and cutting machinery within a mercury-free environment, ensuring strict adherence to DIN 1436 and drawing 56161 10503412. The project mandates rigorous quality control and compliance standards, including SAE AS9003, ISO 9001, and MIL-STD-1916. Additionally, all items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129. The work is associated with the Department of Defense under the DLA Weapons Support ASC Commodities Division and is to be performed in New Cumberland.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Annular Ball Bearing Supplier (NSN 3110008522646)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the procurement of 53 annular ball bearings under NSN 3110008522646. The supplier is responsible for manufacturing or sourcing bearings that match Part Number 890666-6, ensuring all units undergo bare item marking per RQ017 and adhere to preservation and packaging standards defined by MIL-DTL-197M and MIL-STD-129. Delivery is specified as FOB Origin, with the place of performance located in San Diego. To qualify, the contractor must maintain ITAR compliance and utilize inspection systems certified under ISO 9001 or SAE AS9003. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332510. Interested parties must submit their responses by October 23, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Turnlock Fastener Stud Assembly SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 203 Turnlock Fastener Stud Assemblies. The supplier must provide part number 2600-8KA in accordance with NSN 5325-01-212-3514 and RA001 technical requirements. Performance will take place in New Cumberland, Pennsylvania. Strict production constraints are in place, specifically prohibiting the use of additive manufacturing and hexavalent chromium. Additionally, the supplier must ensure full compliance with the Buy American Act. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supply of Plain Rod End Bearing (NSN 3120012544454)This subcontract involves the manufacture or procurement of Plain Rod End Bearings for prime contractors supporting DLA Weapons Support ASC projects. The bearings must adhere to NSN 3120012544454 and the DLA Master List RA001. Technical requirements include thread gagging for Class 3A/3B threads according to SAE AS8879 or MIL-S-7742, with sampling conducted per MIL-STD-1916. All items must be packaged and marked in compliance with MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129. Final delivery of the completed and marked bearings is to be made to the DLA Fleet Readiness Center East located in Cherry Point. The project falls under NAICS code 332510 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacturer of Plain Tapered Pins (NSN 5315-01-171-2305)This subcontract involves the manufacture of 44 plain tapered pins under NSN 5315-01-171-2305 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires precision machining and forming using CNC turning or grinding equipment to deliver finished pins. Performance must align with zero-based sampling plans and the DLA Master List of Technical and Quality Requirements. Qualified providers must hold SAE AS9003 or ISO 9001 certification and maintain approval through the US/Canada Joint Certification Program for ITAR and EAR compliance. The project is associated with NAICS code 332510, with the place of performance located at Tinker AFB. Responses are due by October 23, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET (NSN 5320011377094) SupplierThis subcontract involves the manufacture or procurement of 45 units of PIN-RIVETs, identified by NSN 5320011377094, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All supplied units must adhere to critical application standards and the DLA Master List of Technical and Quality Requirements. Additionally, the supplier is responsible for ensuring that packaging and marking comply with MIL-STD-129 and ASTM D3951 standards. The contract mandates strict adherence to the Buy American Act and the Berry Amendment regarding material sourcing. Final delivery of the 45 units is required at DLA Distribution Warner Robins. This opportunity falls under NAICS code 332510 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacturer of Quick Release Pins (NSN 5315007023112)This subcontract involves the manufacture of 65 Quick Release Pins (NSN 5315007023112) for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The pins must be fabricated using precision machining equipment in strict accordance with NASM17985 and NAS1332 specifications. All finished products must be packaged according to ASTM D3951 and MIL-STD-129 standards. The selected manufacturer is required to hold SAE AS9003 or ISO 9001 certification to ensure quality. Inspection systems must align with SAE AS9003 or ISO 9001, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 23, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-189-8722)This subcontract involves the supply of 20 blind rivets, part number NAS1738B5-8, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rivets must be manufactured or sourced in strict accordance with NAS1738 Revision 6 and NAS1740 Revision 10 standards. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is required to ensure all delivery specifications are met. The contractor must maintain a quality system that complies with either SAE AS9003 or ISO 9001 standards. Additionally, all materials must be sourced domestically to satisfy the requirements of the Buy American Act and the Berry Amendment. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332510.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacturer of Thrust Washer Bearings (NSN 3120000738298)This subcontract opportunity is for the manufacture and supply of 50 Thrust Washer Bearings, identified by NSN 3120000738298, to support prime contractors working on DLA Weapons Support ASC projects. The selected provider must utilize precision machining and critical application quality controls to ensure all units meet exact NSN specifications. Performance will take place in Corpus Christi, Texas, under the oversight of the Department of Defense. The contract is designated as a Total Small Business Set-Aside under NAICS code 332510. Strict regulatory compliance is required, including adherence to the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Additionally, the manufacturer must hold either SAE AS9003 or ISO 9001 certification to qualify for the award.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

NAICS: 488510
New
DIBBS
Specialized Military Packaging and MarkingThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves providing specialized military-grade packaging, preservation, and marking services for prime contractors. The work must be performed in Tracy, California, and requires strict adherence to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. Technical requirements include the implementation of preservation method 10 and cleaning and drying method 1, with a strict prohibition on the use of mercury or ozone-depleting chemicals. The selected provider is responsible for delivering finished shipments that are fully packaged, marked, and ready for FOB Origin transport. This opportunity was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Precision Tube Tee ManufacturingThis subcontract involves the manufacture and supply of 317 packages of precision Tube Tees, identified by NSN 4730-00-287-1707, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. Production must strictly adhere to TDP Rev A Gen 2, SAE J512 Revision 11/01/2025, and Reference Drawing 18876 9026856. The use of additive manufacturing is explicitly prohibited, and all deliverables must comply with the Buy American Act and the Berry Amendment. The project falls under NAICS code 332999 and is managed by the Department of Defense. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of October 26, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
Air Duct Hose (NSN 4720-01-306-6828)This subcontract involves the manufacture or procurement of a specialized air duct hose, identified by NSN 4720-01-306-6828, for the DLA Weapons Support Fluid Handling Division. The designated item is intended for delivery to the USS Gridley DDG 101 and must strictly adhere to the DLA Master List of Technical and Quality Requirements. All products must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. To be eligible for this contract, the provider must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications. The project falls under NAICS code 332912 and is managed by the Department of Defense. Interested parties must respond by October 30, 2026, for performance located at FPO 96666.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Aerospace Packaging and MarkingThis subcontract for MIL-SPEC Aerospace Packaging and Marking supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing specialized packaging and marking services for critical aviation components and tube assemblies intended for prime contractors. All work must strictly adhere to ASTM D3951 and RP001 packaging standards, with marking and labeling performed according to MIL-STD-129 to ensure all items are shipment-ready for the DLA Distribution Depot Oklahoma. A primary technical requirement of the contract is the preservation of the oxygen-clean status of all assemblies during the packaging process. Performance will take place at Tinker AFB, Oklahoma. Interested parties must respond by October 26, 2026, regarding this requirement categorized under NAICS code 488410.
Motor Vehicle Towing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332813
New
DIBBS
Oxygen System Cleaning and Inspection ServicesThis subcontract for Oxygen System Cleaning and Inspection Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized cleaning and inspection of metal tube assemblies for prime contractors, ensuring that both interiors and exteriors are free of oils and particulates. All work must be performed in accordance with AF Drawing 8148650 for oxygen service, utilizing certified chemical degreasing systems or ultrasonic cleaners. The scope of work requires the delivery of certified oxygen-clean assemblies accompanied by detailed inspection reports. Performance will take place at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332813.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of precision metal tube assemblies for oxygen life support equipment under the DLA Weapons Support Fluid Handling Division. The selected contractor will be responsible for the cutting, bending, and fitting of tubing in strict accordance with AF Drawing 8148650 to deliver assemblies identified by NSN 4710-00-344-3939. Performance of the work is located at Tinker AFB. To be eligible for this project, contractors must obtain Engineering Source Approval from the government design control activity and maintain CMMC Level 2 compliance. The opportunity is categorized under NAICS code 336413, with a response deadline set for October 26, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Nonmetallic Hose/Tubing Material SupplyThis subcontract opportunity is for the supply of raw nonmetallic tubing and hose materials to support prime contractors working with the DLA Weapons Support Fluid Handling Division. The selected provider must deliver high-grade polymers and elastomers that strictly adhere to the chemical and physical properties specified in drawing NR 78286 SS43. Because these materials are classified as Critical Safety Items, the contractor is required to provide comprehensive material certifications and full supply chain traceability. The project is designated as a Total Small Business Set-Aside under NAICS code 326220 and is managed by the Department of Defense. Performance for this contract will take place in San Diego, California. Interested parties must submit their responses by October 22, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Military-Spec Packaging and Marking for Fluid Handling ComponentsThis subcontract involves providing packaging materials and performing final packing and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the execution of packaging according to MIL-STD-2073-IE and marking per MIL-STD-129 to ensure a shelf life of 120 months. The project entails the delivery of 112,000 units to be distributed across DLA facilities in Jacksonville and San Diego. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Performance will take place in San Diego, California. Interested parties must adhere to the response deadline of October 22, 2026, to be considered for this military-spec requirement.
Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Hose Assembly Fabrication (NSN 4720-01-289-6752)This subcontract involves the fabrication and assembly of 112,000 traceable nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The work must be performed in accordance with drawing NR 78286 SS43 Revision 14, as these components are designated as Navy Critical Safety Items. Performance of the contract will take place in San Diego, California. To be eligible, contractors must hold SAE AS9100 certification, CMMC Level 2 compliance, and approval from the US/Canada Joint Certification Program. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326299. Interested parties must respond by October 22, 2026.
All Other Rubber Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423840
New
DIBBS
Authorized Distributor for NSN 4720-01-649-1469This subcontract involves the supply of four genuine OEM nonmetallic hose assembly sets for the DLA Weapons Support Fluid Handling Division, specifically for NSN 4720-01-649-1469. The contractor is required to source authentic parts from Eaton Aeroquip or Sikorsky, ensuring a verified shelf-life of 120 months. All deliveries must include CSI certification and full traceability paperwork to maintain quality and authenticity standards. Compliance requirements are stringent, necessitating JCP certification for the handling of ITAR and EAR controlled items. The contractor must also adhere to MIL-STD-129 and MIL-STD-130N standards. Performance for this contract will take place in San Diego, with a response deadline set for October 26, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
Nonmetallic Hose Assembly Manufacturing (CSI)This subcontract involves the manufacture of four certified nonmetallic hose assembly sets for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating components according to NSN 4720-01-649-1469 and Critical Safety Item standards, with performance taking place in San Diego. Strict compliance is required across several regulatory and quality frameworks, including JCP certification for ITAR and EAR adherence, as well as RQ001 quality standards. Additionally, the contractor must maintain configuration management per RQ002 and ensure full supply chain traceability in accordance with DLAD Procurement Note C03.
All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332813
New
DIBBS
Hardware Finishing and CoatingThis subcontract opportunity, titled Hardware Finishing and Coating, is issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division. The selected contractor will perform surface treatment and plating for prime contractors, specifically applying protective coatings to access door hinges in accordance with provided technical drawings. All work must be performed at Tinker AFB and must strictly adhere to environmental regulations, ensuring the process is free of Class I ozone-depleting chemicals and hexavalent chromium. The project is designated as a Total Small Business Set-Aside under NAICS code 332813. Interested parties must submit their responses by October 26, 2026. The primary objective is the delivery of finished, coated hardware that meets all specified technical and environmental requirements.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS