Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

53--LOCK ASSEMBLY,FLUSH

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of flush lock assemblies for DLA Aviation. The current contract, SPE4A126P0151, is held by Hartwell Corporation with a total value of 43,123.68 dollars. The existing agreement is priced as a firm fixed price contract and is estimated to end on April 9, 2026. The opportunity is classified as likely for recompete with a medium confidence level. It falls under NAICS code 332994 and is managed by the DLA Aviation office located in Richmond, Virginia. Keanna Banks serves as the primary point of contact for this pre-forecast requirement.

General Info

DLA Aviation predicted recompete for flush lock assemblies with Hartwell Corporation.

Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories Manufacturing

Place of Performance

VA, 928706732, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 9

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / AgencyDLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

Keanna Banks

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE4A126P0151 Incumbent: HARTWELL CORPORATION Contract Value: $43,123.68 Potential End Date: 2026-04-09T00:00:00.000Z Competition: NOT COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=0c307c3857164e46b4add0f5d25445a1

Similar Contracts

Same NAICS industry code

Park Ranger Safety Equipment & Uniforms

Solicitation # PKS-IFB-27-0471

The City of Phoenix Parks and Recreation Department is soliciting offers under solicitation PKS-IFB-27-0471 for park ranger safety equipment and uniforms. The primary scope involves the procurement of Concealable Level IIIA body armor, outer vest carriers, retractable friction loc steel batons, and OC spray. Ballistic vests must be constructed from a hybrid of Twaron, Goldflex, Kevlar XP, and XLT with moisture-wicking liners and include custom embroidery for badges, name tapes, and identifiers. The contractor is required to provide two fittings per ranger, with final delivery within four to six weeks of initial measurement. All products must carry a minimum five-year warranty and meet specific safety standards, including being non-flammable and EID compatible. The contract term is for five years starting on or after December 1, 2026, with no options to extend. Awards will be made to the lowest responsive and responsible offerors, with evaluation factors including technical capability, resource availability, safety records, and the bidder's place of business. Pricing must remain firm and fixed for the first year, with subsequent annual increases requiring 60 days' written notice. Deliveries are FOB destination to various park ranger stations between 8:00 a.m. and 2:00 p.m. on weekdays. The contractor must maintain significant insurance coverage, including a $4,000,000 general aggregate limit, and comply with Arizona state laws and Phoenix City Code regarding equal employment and legal worker requirements. Responses are due electronically via the OpenGov Procurement Portal by November 6, 2026.

Parks and Recreation

POSTED

about 11 hours ago

DEADLINE

Manufacture and Supply of Bronze Pipe Flanges (NSN 4730-00-022-2802)This subcontract involves the manufacture and supply of 12 bronze pipe flanges for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The project requires the fabrication of 5-inch iron pipe size, 200 PSI, socket-type flanges featuring precision machined grooves for brazing rings. All production must strictly adhere to MIL-V-24624 and B46.1 standards. Technical requirements include the use of precision CNC machining and mandatory JCP certification to comply with ITAR and EAR export controls. The work is associated with NAICS code 332994 and will be performed in Tracy, California. Responses for this requirement are due by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

Supply of FN Herstal Gun Mount PedestalThis subcontract involves the procurement and delivery of one FN Herstal S.A. gun mount pedestal, specifically part number 3634200650 and NSN 1010131231283, to support prime contractors fulfilling DLA supply contracts. The scope of work requires the contractor to perform marking and labeling according to MIL-STD-129 and provide comprehensive quality assurance documentation to meet Critical Application Item standards. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 332994. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

Supply of Shock Absorbers for Safe Arming Devices

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Manufacture of Warning Streamer / Ground Safety PinsThis subcontract involves the manufacture of 56 Warning Streamer Pins, identified by NSN 1730-00-784-9258, for prime contractors supporting Department of Defense DLA supply contracts. The fabrication process must strictly adhere to Reference Drawing 76823 10Y203 Revision D, with identification markings applied according to MIL-STD-130N. Quality assurance is managed through zero-based sampling plans as specified in MIL-STD-1916 or ASQ H1331. The performing entity must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The work is categorized under NAICS code 332994 and will be performed in New Cumberland. Interested parties must respond by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

Supplier of Automatic Gun Barrels (NSN 1005-00-787-9802)This subcontract involves the supply of 225 automatic gun barrels, identified by part number 1005-00-787-9802, for prime contractors working on Department of Defense procurement projects. Managed by the DLA Weapons Support Land Supply Chain, the contract requires the manufacturer to utilize precision machining to ensure all units strictly adhere to Form, Fit, and Function technical data requirements and government military hardware packaging standards. Eligible suppliers must possess a valid CAGE code and maintain full compliance with FAR 52.222-20. The procurement falls under NAICS code 332994, with a response deadline set for November 9, 2026. Performance of the contract will be centered in the 17070-5002 zip code area.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Small Arms Cartridge FollowerThis subcontract involves the manufacturing of small arms cartridge followers for prime contractors supporting the Defense Logistics Agency. The contractor is responsible for fabricating components that strictly adhere to NSN 1005013589718 specifications and DLA Master List technical requirements. Production must be carried out using precision machining, as the use of additive manufacturing is explicitly prohibited for this project. Compliance requirements are stringent, necessitating a CMMC Level 2 self-assessment and adherence to the Buy American Act, the Berry Amendment, and Category I Demilitarization standards. The performance of the contract will take place in Austin, Texas, with a response deadline set for November 9, 2026. The final deliverable is the completed cartridge follower meeting all specified defense standards.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Supply of XM40 Riot Control Agent Simulator DispersersThis subcontract with the DLA Weapons Support Land Supply Chain involves the manufacture or procurement of 229 XM40 Riot Control Agent Simulator Dispersers for Department of Defense prime contractors. The provider must ensure all hardware meets NSN 1040-01-501-4423 specifications, conduct origin inspections, and coordinate testing witnessed by government representatives. Performance will take place in New Cumberland, Pennsylvania. Strict regulatory and security standards apply to this engagement, including mandatory CMMC Level 2 certification and full compliance with ITAR, EAR, and the Buy American Act. Additionally, the contractor is responsible for the specialized handling of UN1950 hazardous materials. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

Supply of Fiberlock (NSN 5342-01-052-1023)This subcontract involves the manufacture or procurement of 313 Fiberlock hardware units under NSN 5342-01-052-1023 for prime contractors supporting the DLA Weapons Support ASC. The selected provider must ensure all items are inspected according to MIL-STD-1916 or ASQ H1331 and adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packing and marking. Final delivery of the inspected units is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania. To qualify for this contract, the supplier must maintain SAE AS9003 or ISO 9001 certification and demonstrate full compliance with ITAR and EAR regulations. The project falls under NAICS code 332994 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

Supply of Specification-Grade Tool SteelThis subcontract involves the supply of specification-grade raw tool steel to prime contractors supporting the Department of Defense, specifically for DLA Weapons Support Land Supplier Operations. The scope of work requires the sourcing and delivery of high-strength, wear-resistant steel that strictly adheres to QPL-3150-34 and QPL-16173-84 specifications. To ensure quality and authenticity, the provider must furnish Material Test Reports certifying the grade and origin of all delivered stock. Compliance is a critical component of this agreement, as the provider must adhere to Berry Amendment domestic sourcing requirements and maintain full ITAR and EAR compliance. The performance of the contract is centered in Albany, Georgia, under NAICS code 332994. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

Supply of Charging Handle Insert Catch (NSN 1005-01-715-1774)This subcontract involves the manufacture or procurement of a Charging Handle Insert Catch, identified by NSN 1005-01-715-1774, for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for delivering one unit that meets all technical specifications, ensuring the item is packaged according to MIL-STD-2073-1E standards and shipped via the fastest traceable method to Fort Campbell, Kentucky. The opportunity is categorized under NAICS code 332994 and was posted on October 28, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense to ensure the supply of critical components to military installations.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Small Arms Storage Rack ManufacturingThis subcontract involves the manufacture and supply of a single small arms storage rack for prime contractors supporting DLA Weapons Support. The fabrication must strictly adhere to the technical and quality requirements specified under NSN 1095-01-561-5431 and RA001. To ensure regulatory compliance, the provider must follow the Buy American Act and the Berry Amendment, and the use of additive manufacturing is prohibited without explicit authorization. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 9, 2026, for this requirement categorized under NAICS code 332994.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

More opportunities from DLA Aviation

Same awarding agency

Aviation Controller Inspection and Functional TestingThe Aviation Controller Inspection and Functional Testing subcontract involves providing independent inspection and functional testing services for prime contractors supporting DLA Aviation projects. The scope of work includes conducting environmental stress screening, functional input/output testing, and final quality inspections. These tasks require the use of specialized equipment such as signal generators, oscilloscopes, and environmental chambers to ensure all units meet strict performance standards. Compliance is mandatory with AS9100 and MIL-STD testing protocols to maintain aviation quality and safety. The selected provider is responsible for delivering comprehensive certified test reports and detailed inspection logs for every unit processed. This opportunity falls under NAICS code 541380 and is managed through the Department of Defense.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Aerospace Component Supply (Switches, Joysticks, Sensors)This subcontract under DLA Aviation involves the supply of high-reliability aerospace components, specifically switches, sensors, and interactive input devices, to prime contractors. The scope of work focuses on the procurement of individual component parts, including tactile sensors and aerospace-grade potentiometers, with a particular emphasis on managing long-lead time items and addressing diminishing manufacturing sources to maintain a steady supply chain. To ensure compliance with Department of Defense standards, the provider must maintain full traceability documentation and provide Certificates of Conformance for all delivered parts. The contract falls under NAICS code 423850 and is dedicated to supporting critical aviation infrastructure through the delivery of specialized hardware.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Hand Controller Housing and Mechanical Chassis FabricationThis subcontract for DLA Aviation involves the fabrication of hand controller housings and mechanical chassis, specifically focusing on external casings, ergonomic grips, and internal chassis for prime contractors. The scope of work requires CNC machining, including milling, turning, and finishing of high-strength polymers or aerospace-grade metals, adhering strictly to specifications provided by Mason Electric or Rockwell Collins. Qualified providers must possess the necessary CNC mills and lathes and maintain AS9100 or ISO 9001 certification to ensure aerospace quality standards. The final deliverables consist of finished mechanical housings and chassis, with the solicitation posted on October 28, 2026, and a response deadline of October 30, 2026.

POSTED

about 22 hours ago

DEADLINE

Interactive Hand Controller PCB and Electronics AssemblyThe Interactive Hand Controller PCB and Electronics Assembly subcontract involves the manufacture and assembly of internal printed circuit boards and electronic circuitry for prime contractors supporting DLA Aviation projects. The scope of work encompasses PCB layout, fabrication, surface mount technology assembly, and the soldering of internal circuitry in strict accordance with aviation standards. The final deliverable consists of completed and fully tested electronic circuit assemblies. To qualify for this engagement, providers must possess specialized PCB fabrication equipment and SMT machines. Mandatory certifications include AS9100 and IPC-A-610 to ensure compliance with aerospace quality and reliability requirements. This opportunity falls under NAICS code 334418 and is managed under the Department of Defense.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 22 hours ago

DEADLINE

CONTROLLER,HAND,INTERACTIVE

Solicitation # SPE4A727R0099

The Defense Logistics Agency Aviation is conducting market research through a sources sought notice for the new manufacture of the Interactive Hand Controller, identified by NSN 5895-015052115. The requirement is for a minimum of 17 and a maximum of 67 units, with approved part numbers including 218-1239-010 from Rockwell Collins, 6100-1001-01 from ATI Engineering Services, and 730-4413 from Mason Electric Co. The scope of work encompasses the entire production lifecycle, including the procurement of component parts, inspection, testing, preservation, packaging, and shipping. Additionally, the selected provider may be responsible for supply chain management, logistics planning, and addressing diminishing manufacturing sources and material shortages. This effort is categorized under NAICS code 336411. While there is no formal solicitation at this time, the government is evaluating potential market capacity to determine if the requirement will be set aside for small businesses or pursued through full and open competition. Interested parties must submit their organization details and tailored capability statements to Montana Kipp by October 30, 2026. Evaluation will focus on the provider's ability to secure necessary financial and technical resources and implement a project management plan that ensures cost containment, schedule compliance, and risk mitigation.

Aircraft Manufacturing

POSTED

about 22 hours ago

DEADLINE

CASE,OPTICAL INSTRUMENT

Solicitation # SPE4A727R0097

DLA Aviation is soliciting quotes for an unrestricted Indefinite Quantity Contract (IQC) with a five year base period for the manufacture of Optical Instrument Cases, NSN 5855-01-609-6252, Part Number OFM-2054-A1. The requirement includes the procurement of component parts, inspection, testing, packaging, and shipping. The estimated annual demand is 305 units, with a minimum delivery order quantity of 76 units and a maximum of 305 units. Delivery is required within 120 days after receipt of order, with inspection and acceptance occurring at the destination and shipping terms set as FOB Origin. The solicitation is scheduled to be issued on November 13, 2026, and will close on December 12, 14, 2026, with offers submitted in writing via the DLA Internet Bid Board System. Award decisions will be based on an equal weighting of price, past performance, and delivery, and the Supplier Performance Risk System will be applied. Prospective suppliers must be registered in the System for Award Management. While EEO clearance is not required and progress payments are not authorized, certified cost and pricing data may be requested.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

NSN 6220-01-434-1886 - LIGHT ASSEMBLY, INDICATOR

Solicitation # SPE4A6-27-R-0077

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 54 indicator light assemblies for use in F-16 aircraft. The requirement specifies Luminescent Systems, Inc. part number 89-00173-001 as an approved source. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 54 units. Delivery is set as FOB Origin to various facilities within the Continental United States, with a required delivery schedule of 191 days after receipt of order. The solicitation is unrestricted and will be available via DIBBS around November 13, 2026, with a response deadline of December 14, 2026. Prospective offerors must submit a completed physical solicitation package, as electronic offers are not acceptable. While the total value is not expected to exceed the TINA threshold, contractors should be prepared to provide certified cost and pricing data if requested.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

AIRCRAFT, STRATOLIFTER, C/KC-135; IGNITER, SPARK, A/C HEATER

Solicitation # SPE4A727R0074

Aircraft Manufacturing

POSTED

about 22 hours ago

DEADLINE

WASHER,FLAT - 40A /HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V

Solicitation # SPE4A627R0086

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

NSN 6150-21-920-2797 - CABLE ASSEMBLY, SPECIAL ELECTRI

Solicitation # SPE4A6-27-R-0079

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 28 special purpose electrical cable assemblies used in Aircraft Launch and Recovery Equipment. The requirement specifies Idal Technologies Inc. as an approved source for part number 6537C026-2. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 28 units. Delivery is set as FOB Origin with a required delivery schedule of 422 days after receipt of order to various facilities within the Continental United States. While the total value is not expected to exceed the TINA threshold, offerors should be prepared to provide certified cost and pricing data. Electronic offers are not acceptable, and completed solicitation packages must be submitted. The solicitation is expected to be issued around November 13, 2026, with a response deadline of December 14, 2026.

Other Electronic Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

Annual Synopsis Boeing

Solicitation # Annual_Review_SPE4A1_25G0004_25G0007

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

AIRCRAFT, STRATOFORTRESS, B-52; SUPPORT, ENGINE MOUNT

Solicitation # SPE4A727R0073

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

Earlier notices in this NAICS code

Posted before this notice, open and closed

10--TEST KIT,PRESSURE-V

DLA Land And Maritime

POSTED

about 2 years ago

DEADLINE

10--MAGAZINE,CARTRIDGE

Solicitation # SPE7LX25U0370

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--SLING,SMALL ARMS

Solicitation # SPE7LX25U0358

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

Solicitation # SPE7LX25U0359

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--CHUTE,EJECTION

Solicitation # SPE7LX25U0356

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--END FITTING,EXIT

Solicitation # SPE7LX25U0238

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--CONVEYOR,AMMUNITION

Solicitation # SPE7LX25U0319

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--MOUNT,MACHINE GUN

Solicitation # SPE7LX25U0385

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

Solicitation # SPE7L424U0118

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--HOUSING ASSEMBLY,TR

Solicitation # SPE7L124Q0668

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--KIT,HARDWARE,BARREL

Solicitation # SPE7L425Q0008

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

10--KNIFE,SURVIVAL

Solicitation # SPE7LX25U0351

DLA Land And Maritime

POSTED

about 2 years ago

CLOSED

about 2 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS