Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

53--RIVET,SOLID

Active
N0038325QT596Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 1,500 solid rivets under solicitation N0038325QT596, issued by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania, with the NAICS code 332722. The closing date has been amended to February 20, 2026, following a prior revision that set it to May 18, 2026, and the original quantity of 1,643 units was reduced to 1,500. The buyer code has been updated to N791.13, and all other terms remain unchanged. The point of contact is Carolyn A. Clark, reachable via email at carolyn.a.clark30.civ@us.navy.mil and telephone at 771-229-0402. The contract incorporates numerous federal clauses including Buy American Act requirements, Equal Opportunity for Workers with Disabilities, Annual Representations and Certifications, and Navy-specific protocols for AbilityOne contractors and payment instructions. Delivery is expected to be early and incremental, and contractual documents are deemed issued upon electronic transmission or mail deposit. The primary item is a solid rivet with no specified place of performance beyond the general agency location.

General Info

Procurement of 1,500 solid rivets for Navy, FOB origin, single-source preferred, timely delivery required.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

2 updates
PhaseSolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Type Changed

Solicitation → Presolicitation

Amendment 1

Contract was updated

Amendment 2

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTACT INFORMATION|4|N791.15|LRJ|771-229-0402|carolyn.a.clark30.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report combo||TBD|N00383|TBD|TBD|See schedule|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1|| ROYALTY INFORMATION (APR 1984)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND 2025-O0004))|12|332722|600||||||||||| FACSIMILE PROPOSALS (OCT 1997)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| The purpose of this amendment is to increase the quantity from 1,500 units to1,650 units and extend the closing date to 06 AUG 2026. All other terms and conditions remain unchanged. \ The purpose of this modification is as follows: 1. To update the closing date to 18 MAY 2026. 2. To decrease the quantity from 1,643 units to 1,500 units. All other terms and conditions remain unchanged. \ The purpose of this amendment is as follows: 1. To update the buyer code to N791.13. 2. To update the closing date to 20 FEB 2026. All other terms and conditions remain uncahnged. \ All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. Early and incremental deliveries accepted and preferred. \

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED
Solicitation # SPE4A6-26-T-09HS
The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-Q-1419
The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
STUD, WELDING
Solicitation # SPE4A1-26-T-0556
The contract pertains to the procurement of 80 units of STUD, WELDING with NSN/Part Number 5307-01-529-7683, under solicitation SPE4A1-26-T-0556, issued by the Department of Defense through the Aviation Supply Chain office. The response deadline is August 5, 2026, with delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue or award date depending on acquisition size. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization may access the associated technical data. Additionally, the item must comply with DLA packaging requirements, quality conformance inspections, and physical identification and marking standards. Drawings are accessible via the DIBBS portal during open solicitation, and the place of performance is specified as New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Jade Stringfield, reachable via email and phone provided.
AVIATION SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-04MJ
The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-09HR
The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-08RR
The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EX
Solicitation # SPE4A6-26-T-57S2
The contract is for 268 self-locking nuts with an extended washer and hexagonal configuration, identified by NSN 5310-01-342-2011, under solicitation SPE4A6-26-T-57S2. The product must meet the latest revision of the original equipment manufacturer’s drawing and comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Identification marking of the nuts must follow MIL-STD-130N dated 16 Nov 2012, including manufacturer’s logo, lot number, and material identification, excluding any government-specific identifiers on non-accepted supplies. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The supplier must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and handle covered defense information appropriately. The delivery deadline is 169 days from award, and the place of performance is Tracy, CA, 95304-5000. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, and the contracting office is the ASC Commodities Division of the Department of Defense, with Alexander Sotos as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT
Solicitation # SPEFA5-26-Q-0066
This contract specifies the procurement of a single NAS1958C28R bolt under part number 5306-LN0034747 with a firm fixed price and no variance in quantity allowed. The item must be delivered within 30 days after the award date to the destination specified, with inspection and acceptance occurring upon delivery. The product must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per ASTM D3951 and labeling requirements per MIL-STD-129, with precedence given to the DLA Master List when conflicts arise. Packaging must align with DLA-specific procurement guidelines, including palletization per RP001, and sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each, and physical identification of the bare item must adhere to RQ017 requirements. The delivery is directed to the Fleet Readiness Center at Cherry Point, North Carolina, with the solicitation number SPEFA5-26-Q-0066 and a response deadline of August 7, 2026, with a required ship date of July 8, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-Q-0942
The contract involves the procurement of 55 units of a clamp and coupling nut identified by NSN 0001S00000053 under solicitation SPE4A7-26-Q-0942, with a delivery requirement of 142 days after award. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Items must be physically marked in accordance with RQ017, and sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and inspection and acceptance occur at the manufacturer’s facility. All data and communications are subject to covered defense information policies. The contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense, with Dedrick Benson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
STUD, WELDING
Solicitation # SPE4A1-26-T-1482
This contract solicits the procurement of 169 units of a welding stud identified by NSN/Part Number 5307-01-529-7683, with delivery expected within 166 days after the award date. The solicitation number is SPE4A1-26-T-1482, posted on February 24, 2026, with a response deadline of March 4, 2026. The acquisition is managed by the Department of Defense’s Aviation Supply Chain office, with performance located in New Cumberland, PA, under NAICS code 332722. The primary contact for this solicitation is Jade Stringfield. The contract incorporates Defense Logistics Agency (DLA) packaging, technical, and quality requirements as detailed in the DLA Master List, enforcing key provisions such as quality conformance inspections, physical identification and marking of bare items, and strict handling of export-controlled technical data under ITAR and EAR regulations. Only contractors approved through DLA’s US/Canada Joint Certification Program and trained in proper export controls may access sensitive technical data involved in this procurement. Additionally, government identification must be removed from non-accepted supplies, and drawings relevant to this solicitation are available through DLA’s specified online portals during the open solicitation period.
AVIATION SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT SET, ENGINE SHA
Solicitation # SPE4A6-26-T-09LA
The contract pertains to the procurement of one set of bolt assemblies designated as BOLT SET, ENGINE SHA with NSN 5306015786524, issued under solicitation SPE4A6-26-T-09LA by the ASC Commodities Division of the Department of Defense. Delivery is mandated within five days after order placement, with title and risk of loss transferring to the Government at origin under FOB ORIGIN terms, while inspection and acceptance occur at the designated destination: Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville, NC. Packaging must adhere to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and all packaging must be labeled per MIL-STD-129 with correct unit of issue (SE) and quantity per unit pack as specified. Palletization must comply with DLA Packaging Requirements RP001, and shipment must be made by the fastest traceable means, prohibiting parcel post; the RDD code 777 and supplier address SIG: A indicate specific logistics directives. Quality assurance requires sampling based on MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with zero non-conformances mandated in the sample unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively. The item is classified as a Critical Application Item and subject to cybersecurity compliance under CMMC Level 2 Self-Assessment, with Covered Defense Information governed by RD002. Unit identification is not required as per DFARS 252.211-7003(c)(1)(i), though supplier representations must include UEI and CAGE Code if providing covered defense telecommunications equipment. All hazardous materials must bear labels complying with 29 CFR 1910.1200 and DFARS 252.223-7001, with mandatory submission of MSDS and labeling plans prior to award. Contract clauses include mandatory representations for small business status, trafficking in persons compliance, employment eligibility, sustainable product use, and accelerated payments to small business subcontractors, along with safeguarding requirements for contractor information systems. The solicitation requires electronic submission via DIBBS by July 31, 20
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
CASTER, SWIVEL
Solicitation # SPE7L1-26-T-849S
The contract solicitation SPE7L1-26-T-849S is for the procurement of two swivel casters with NSN 5340-01-574-2077 under the Department of Defense’s Defense Logistics Agency, requiring delivery to Blount Island Command in Jacksonville, Florida, within five days of order placement, with a required delivery date of July 16, 2026. All items must be shipped FOB origin, with title and risk transferring upon loading onto the carrier, and inspection and acceptance occurring at the destination. Packaging must strictly comply with DLA’s RP001 packaging requirements, with hazardous materials as defined by FED-STD-313 requiring adherence to Technical Requirement IP025 and non-hazardous materials conforming to ASTM D3951, subject to precedence by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must follow MIL-STD-129, including proper unit of issue and quantity per unit pack, with palletization executed in accordance with RP001. The use of parcel post is prohibited; shipments must be sent via the fastest traceable means to the designated freight shipping address. The contract incorporates numerous FAR and DFARS clauses governing compliance with sustainable products, hazardous material identification, cybersecurity protections under NIST SP 800-171, trafficking in persons, employment eligibility verification, and restrictions on covered defense telecommunications equipment. Offerors must hold a valid Unique Entity Identifier and CAGE Code, submit representations regarding small business status and socioeconomic classifications via SAM.gov, and disclose any involvement with covered defense telecommunications equipment or services. All proposals must be submitted electronically through the DLA Internet Bid Board System by the August 5, 2026 deadline, with invoicing post-award required through the Wide Area WorkFlow system. Although the contract includes standard pricing and CLIN structure, no unit or total prices are provided, rendering the financial value undetermined at this stage. The contracting officer will specify the contract type and other administrative details upon award, including payment office and contracting officer representative information.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 334511
New
Federal
58--PROCESSOR,COUNTERME, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA79
The contract opportunity pertains to the repair or modification of a processor classified under NSN 7R-5865-015492378-QF with Technical Data Package version 001, requiring seven units to be delivered FOB origin. It is issued under solicitation number N0038326QMA79 by the Naval Supply Systems Command Weapon Systems Support, a branch of the Department of Defense, with the office located in Philadelphia, Pennsylvania. The solicitation was posted on July 16, 2026, and responses are due by August 31, 2026, at 4:00 a.m. Eastern Time. This is a presolicitation notice indicating the government is seeking industry input prior to formal release, and no set-aside type has been determined. The primary point of contact is Autumn M. Rau, reachable via email at Autumn.M.Rau2.civ@us.navy.mil or by phone at (717) 697-4313, with additional fax and email details provided for correspondence. The place of performance is undefined, and no NAICS code has been assigned.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
66--DISPLAY UNIT,FLIGHT
Solicitation # N0038326RMA89
The contract solicitation is for a display unit, flight, identified by NSN 7R-6610-016935532-E7 and reference number 8940663-0004, with a quantity of two units to be delivered FOB origin. The solicitation is issued under N0038326RMA89 by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense agency, and was posted on July 31, 2026, with responses due by September 4, 2026. This is a presolicitation notice, indicating that the formal solicitation has not yet been issued, and no set-aside classification or NAICS code has been assigned. Delivery will originate from the contractor’s location with no specified place of performance beyond the FOB origin term. The primary point of contact is Peter A. Kobryn, reachable at the provided email and phone number, based at the office located in Philadelphia, Pennsylvania, ZIP code 19111-5098. Interested parties should monitor the SAM.gov link for updates or the official solicitation release.

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
66 - FMS Repair - Control Display Unit
Solicitation # N0038326QF165
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, is seeking a sole source repair for one Control Display Unit with National Stock Number 6605-016040696 and part number 292A860-3, designated as a Critical Application Item under FMS Case SR-P-MAL. Due to the lack of sufficient, accurate, or legible technical data in government possession, the requirement cannot be competitively sourced and must be awarded under an existing Blanket Ordering Agreement to the current approved provider. The item is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, requiring Government Source Approval prior to award, and delays in securing a new approved source would impede timely fulfillment. Proposers not already approved must submit all requested documentation as outlined in the NAVSUP WSS Source Approval Brochure, or their proposal will be disqualified. The contract includes a 365-day induction period for the initial unit, with the government retaining the right to extend this period by an additional 365 days, and any unused capacity from the first year may be carried forward. Contractors must provide pricing for up to ten total units over the full contract term, including the initial unit, with separate pricing if costs change after the first year. The total contract value for evaluation purposes will be based on the highest proposed unit price multiplied by the maximum quantity. Offers must be submitted by August 5, 2026, and inquiries should be directed to Dana Scott at the provided email address.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
Federal
CAP SET,PROTECTIVE,
Solicitation # N0038326QSB23
The solicitation seeks protective capacity sets under NAICS code 332510, issued by the Navy’s Naval Supply Systems Command Weapon Systems Support from Philadelphia, Pennsylvania, with a response deadline of August 31, 2026. Contracts are awarded on a fixed-price basis, and all items must meet strict inspection and acceptance standards, including a twelve-month warranty with a sixty-day discovery period for defects. Source approval from NAVSUP WSS is mandatory, and proposals lacking required documentation from the official source approval brochure will be disqualified. Delivery must comply with FMS instructions, and early or incremental shipments are preferred. Contractual documents are deemed issued upon electronic transmission or mailing, and acceptance of the proposal constitutes binding agreement. The contract enforces stringent compliance with Buy American provisions, security restrictions, equal opportunity policies, and mandatory use of Workflow Pro for payment processing. All deliveries must adhere to national defense priority ratings, and the contractor must be prepared to meet requirements under AbilityOne and other federal mandates. Contact is handled by Juliana Fiandra, and payment details, delivery locations, and other administrative data remain pending until award.
Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER,COUNTER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA75
The contract solicitation pertains to the repair or modification of a counter transmitter, identified by NSN 7R-5865-014980544-QF and TDP VER 001, with a quantity of six units required. The work is to be performed under a presolicitation notice issued by the Naval Supply Systems Command Weapon Systems Support, operating under the Department of Defense. Delivery is specified as FOB origin, meaning the supplier is responsible for the goods until they are loaded at their facility, after which responsibility transfers to the government. The solicitation was posted on July 16, 2026, with a response deadline of August 31, 2026, at 4:00 AM. The primary point of contact is Autumn M. Rau of N761.07, reachable via email at AUTUMN.M.RAU2.CIV@US.NAVY.MIL or by phone at (717) 697-4313, with a fax number provided for additional communication. The office is located in Philadelphia, Pennsylvania, with no specific place of performance detailed beyond the issuing agency. There is no set-aside designation or NAICS code listed for this solicitation, indicating it is open to all eligible offerors.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16 - FMS Repair of ESM RECEIVER PROCESSOR
Solicitation # N0038326RF061
NAVSUP WSS is soliciting a sole source contract for four ESM RECEIVER PROCESSORS with NSN 1680 017158596 and part number AU263A995-0299, citing insufficient, inaccurate, or illegible data in government possession that prevents competition from other sources. The items are classified as FMS Unique and are subject to both the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, requiring compliance with FAR 52.225-3 and FAR 52.225-5. Government Source Approval is mandatory prior to award, and proposers who are not already approved sources must submit all required documentation as outlined in the NAVSUP WSS Source Approval Brochure; proposals lacking complete information will be rejected. The solicitation, numbered N0038326RF061, was posted on July 31, 2026, with proposals due by August 17, 2026, and falls under NAICS code 336413 with no set-aside provisions. All inquiries should be directed to Dana Scott at the provided Navy email address.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 16 days
View Details
NAICS: 336413
New
Federal
1680 - This is a FMS repair requirement for the repair and upgrade of NSN 7RH 1680 015830119
Solicitation # N0038326QH085
This contract addresses the repair and upgrade of two units of NSN 7RH 1680 015830119, Part Number 2030584-001, under a Foreign Military Sales agreement with Switzerland. The procurement is being conducted as a sole source action with DRS TRAINING AND CONTROL SYSTEMS, LLC, due to the lack of available technical data from the government and the requirement for prior government source approval. The items are government property, governed by FAR clauses 52.245-1 or its alternate, and repairs must align strictly with authorized design controls. While the government anticipates only one acceptable offer, responsible sources not previously approved may submit capability statements, proposals, or quotations provided they meet the stringent source approval requirements outlined by NAVSUP WSS. All submissions must include specific details such as company name, CAGE code, part number eligibility, OEM status, technical capability justification, small business designation, and point of contact, and must be sent to the designated email address by the deadline. Failure to submit complete documentation as mandated by the NAVSUP WSS Source Approval Information Brochure will result in rejection, and no award will be delayed to await source approval processing, as timelines for new source qualification typically preclude schedule accommodation. Offers must be received by August 16, 2026, and although this is a presolicitation notice and not a competitive request, all submissions received within five days of publication will be evaluated. The government retains full discretion to determine whether to proceed without competition, and only offerors who meet all qualification criteria at the time of award will be considered. Commercial item proposals are accepted if submitted within 15 days of notice, but the acquisition will not follow FAR Part 12 procedures. Additional information and qualification requirements are available through the primary point of contact, Alexis Hoepfl, and the procurement is managed by the Department of Defense under NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334290
New
Federal
58--COMPUTER,DIGITAL DA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA72
The contract solicitation NSN 0R-5895-016740122-E7 under solicitation number N0038326QMA72 seeks five units of a digital computer system designated for repair or modification, with delivery terms specified as FOB origin. The request, posted on July 14, 2026, requires responses by August 31, 2026, and is categorized as a presolicitation, indicating it is an early-stage notice seeking industry input rather than a formal bid opportunity. The item is procured by the Navy Supply Systems Command Weapon Systems Support, operating under the Department of Defense, with the office located in Philadelphia, Pennsylvania. The place of performance is not specified, and no set-aside status or NAICS code is provided. Primary point of contact for inquiries is Ethan T. Stein, reachable via email or phone at the Philadelphia office, serving as the designated representative for this procurement.
Other Communications Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
SENSOR DEVICE
Solicitation # N0038326RMA90
The contract pertains to the repair, overhaul, and testing of a SENSOR DEVICE identified by part number 1011850-101 and NSN 1680-01-671-2764, under solicitation N0038326RMA90, issued by the Navsup Weapon Systems Support office. All repairs must strictly adhere to the latest approved technical publications and repair manuals, with any deviation requiring formal review and written approval from the Basic Design Engineer and the Procuring Contracting Officer. The contractor is responsible for providing all facilities, labor, tools, materials, and parts necessary to return units to a Ready for Issue condition, unless specifically designated as Government Furnished Material. Items deemed Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair must be documented and approved by DCMA and the PCO before any work proceeds, with no entitlement to price adjustments if such requests are denied. The contractor must maintain a certified quality management system compliant with ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or equivalent standards. All purchased components must be new and conform to approved drawings and specifications, with receiving inspections documented and retained for government review. Cannibalization is prohibited unless explicitly approved by NAVSUP WSS and the Basic Design Engineer. The work must be performed at the designated location in Melbourne, FL, under the company DRS Network & Imaging Systems, with a CAGE code provided. Configuration management must follow NAVSUP WSS clause NAVICPIA18, and all changes to drawings, sources, or facilities require written government approval. Packaging must comply with MIL-STD 2073, and the contractor must ensure secure, enclosed storage for both incoming and repaired items. The contract includes mandatory compliance with federal acquisition regulations governing Buy American provisions, safeguarding of arms and explosives, equal opportunity, and electronic invoice submission via Wide Area Workflow. The government accepts early and incremental deliveries, and all contractual documents are deemed issued upon electronic transmission or mail deposit. Proposals are due by August 31, 2026, and the point of contact is Ethan T. Stein at the U.S. Navy.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER,COUNTER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA76
The contract solicitation pertains to the repair or modification of a transmitter, counter, identified by NSN 7R-5865-014980544-QF, with a quantity of six units required. The technical data package version is VER 001 and the reference number is 2680605G001. Delivery is specified as FOB origin, meaning the buyer assumes responsibility for transportation costs and risks once the items leave the seller’s location. The solicitation, numbered N0038326QMA76, was posted on July 16, 2026, with a response deadline of August 31, 2026. It is classified as a presolicitation, indicating it is for informational purposes prior to formal bidding. There is no set-aside designation, and no NAICS code is provided. The contracting activity is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. Primary point of contact is Autumn M. Rau, reachable via email and phone, and all correspondence should be directed through the provided contact details. The place of performance is unspecified.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--RECEIVER,COUNTERMEA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA78
The contract pertains to the repair or modification of a receiver for countermeasures, identified by NSN 7R-5865-015490474-QF and referenced under TDP VER 001 and REF NR 2680377G002, with a quantity of four units required. Delivery is specified as FOB origin, meaning the buyer assumes responsibility for the goods once they leave the supplier’s location. The solicitation, numbered N0038326QMA78, was posted on July 16, 2026, with a response deadline of August 31, 2026, at 4:00 a.m. Eastern Time. It is classified as a presolicitation, indicating that formal bidding has not yet commenced and further details may be forthcoming. The contracting office is the Naval Supply Systems Command Weapon Systems Support, part of the Department of Defense, located in Philadelphia, Pennsylvania. The primary point of contact for inquiries is Autumn M. Rau, reachable via email at AUTUMN.M.RAU2.CIV@US.NAVY.MIL, with phone and fax numbers provided. No set-aside type or NAICS code is specified, and the place of performance has not been defined beyond the overarching agency jurisdiction.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
59--RADOME,AIRCRAFT
Solicitation # N0038324QTP80

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details