Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

53--SCREW,CAP,SOCKET HE

Awarded

SPE4A726RX642Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 53 screw, cap, socket head fasteners under solicitation number SPE4A726RX642, awarded by the Defense Logistics Agency Aviation, a division of the Department of Defense. The notice was posted on April 27, 2026, and is classified as an award notice indicating the selection of a vendor for this specific item. The North American Industry Classification System code 332722 identifies the relevant manufacturing category for these hardware components. The contract is managed by an office located in Richmond, Virginia, with a postal code of 23237. The place of performance has not been specified beyond the agency's administrative location. Primary point of contact for inquiries is Lamar Olivier, reachable via email at Lamar.Olivier@dla.mil or by phone at 445-737-5283. No set-aside designation applies to this procurement, indicating it is open to all eligible contractors without restrictions based on small business, veteran-owned, or other categorizations.

General Info

Awarded contract for 53 socket head fasteners to DLA Aviation, Richmond, Virginia, open to all contractors.

Agency

Department Of Defense → DLA AviationView Agency

Contract Value

$0

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Awardee

ATF AEROSPACE, LLCView Profile

Award Issued Date

04/27/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 27

Award Notice

AwardedApr 27

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

Lamar Olivier

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=ec29ff85ec344a229484d9203139282f

Similar Contracts

Same NAICS industry code

Critical Application Machine Screw Supply

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Supply of Plain Hexagon Nuts (NSN 5310-00-282-5658)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-00-914-6130)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Supply of Critical Safety Machine Bolts

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Socket Head Cap Screw Manufacturer/Supplier

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M0-27-Q-0016

This contract is a firm fixed price solicitation for the procurement of four machine bolts, identified by NSN 5306-01-286-0864. The items must be manufactured according to the current revision of the applicable part standard, specifically ASME B18.2.1 Revision D. Delivery is required within 30 days after order, with the destination and acceptance point located at the Pearl Harbor Naval Shipyard in Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging, RQ011 for the removal of government identification from non-accepted supplies, and RQ017 for physical item marking. Identification marking must comply with MIL-STD-130N, and packaging must follow ASTM D3951 and MIL-STD-129. Quality assurance and sampling will be conducted per MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

NUT, SELF-LOCKING, HEXAGON

Solicitation # SPE4A6-26-R-XD63

This contract is for the procurement of 9,000 self-locking hexagon nuts, identified as National Stock Number 5310-99-702-3861. The item is classified as a Commercial Off The Shelf product and is designated as an Air Force Critical Safety Item, meaning all waivers or deviations require approval from the DSC contracting officer. The procurement is associated with GE Aviation Systems and requires adherence to SAE AS9100 quality standards and MIL-STD-129 marking requirements. Delivery is set for 560 days after the order date, with the inspection and acceptance point located at the origin. Shipping is directed to DLA Distribution Warner Robins in Georgia, following DLA packaging requirements and MIL-STD-2073-1E standards. The contract is managed under solicitation number SPE4A6-26-R-XD63 and includes specific documentation requirements for source approval and the handling of covered defense information.

ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A7-26-R-XB13

Solicitation SPE4A7-26-R-XB13 is an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency (DLA) Aviation for the procurement of machine screws, specifically General Electric Company part number R1473P007 (NSN 5305-01-150-6354). This is designated as a critical application item. The contract features a five-year base period with a total value not to exceed 350,000.00 USD. The estimated annual demand is 920 units, with a guaranteed minimum and minimum delivery order quantity of 230 units. Delivery is FOB Destination, and the award will be based on a comparative assessment of price, quoted delivery, and past performance, with SPRS assessments weighted most heavily. The procurement is subject to strict technical and quality requirements, including source approval request documentation and specific packaging and marking standards such as ASTM D3951 and MIL-STD-129. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification. Additionally, eligible contractors must maintain CMMC Level 2 compliance and upload a self-assessment to the SPRS by November 10, 2025. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE4A7-26-R-XB12

Solicitation SPE4A7-26-R-XB12 is a request for quotations from the Defense Logistics Agency for an Indefinite Delivery Contract with a five year base period to procure Hexagon Head Cap Screws under NSN 5305-00-914-6130. The procurement is established as a Firm Fixed Price agreement with a total contract ceiling of 350,000 dollars, an estimated annual demand of 1,440 units, and a guaranteed minimum of 360 units. Award will be based on best value, evaluating price, quoted delivery, and past performance, with a heavy emphasis on SPRS assessments and historical quality and delivery compliance. The hardware must be manufactured according to the current revision of the applicable part standard, specifically ASME B18.2.1, and requires critical item source inspection. Quality assurance involves zero based sampling plans per MIL-STD-1916 or ASQ H1331, and all Class 3A and 3B threads must be inspected for dimensional conformance. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 for palletization. The contract mandates strict adherence to cybersecurity requirements, including CMMC Level 2 Self-Assessment uploads to SPRS for eligibility. Delivery is set as FOB Destination, and invoicing must be processed through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A7-26-R-XB06

Solicitation SPE4A7-26-R-XB06 is an Indefinite Delivery Contract (IDC) issued by the Defense Logistics Agency for the procurement of socket head cap screws (NSN 5305-00-472-3881). The contract features a five-year base period with a total value not to exceed 350,000.00 USD. It establishes a guaranteed minimum of 200 units with an estimated annual demand of 800 units, utilizing firm fixed price pricing. Delivery is required 92 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is subject to stringent quality and security requirements, including CMMC Level 2 certification for contractors accessing controlled unclassified information and compliance with ITAR and EAR export controls. Quality assurance is managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and a Certificate of Quality Compliance is required. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements under RP001. Award decisions will be based on a comparative assessment of price, past performance, and delivery, with a heavy emphasis on SPRS assessments.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A7-26-R-XB08

This solicitation is for the procurement of one plain hexagon nut, identified as NSN 5310-00-282-5658, with a delivery requirement of 77 days after receipt of order. The contract is issued by the Department of Defense ASC Supplier Oper AE and AF Div and is classified as a commercial item. It mandates strict adherence to DLA packaging requirements and technical quality standards, including specific protocols for the removal of government identification from non-accepted supplies and physical item marking. Quality assurance is governed by sampling methods according to MIL-STD-1916 or ASQ H1331, with specific AQL levels assigned for critical, major, and minor attributes. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases as defined by NAVSEA. Documentation requirements for source approval requests must also be met to ensure compliance with all technical and quality specifications.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

WASHER, SHAFT NUT

Solicitation # SPE4A7-26-R-XB40

This contract is a firm fixed price solicitation issued by the Department of Defense for the procurement of one shaft nut washer, identified by NSN 5310-00-394-4184. The delivery is required within 112 days after the order is placed, with both inspection and acceptance occurring at the destination. The procurement includes specific part numbers from Curtiss-Wright Electro-Mechanical and adheres to strict quality and technical requirements maintained in the DLA master list. Compliance mandates include adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with specific requirements for palletization and the removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331, and there is a strict prohibition against the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required by specific systems.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NSN 4810-01-187-9275, PART NUMBER 300310-101, DESCRIPTION: SLEEVE AND SLIDE, DI

Solicitation # SPE4A526R0304

The Defense Logistics Agency Richmond is conducting market research to identify capable sources for the manufacture and supply of 42 units of Sleeve and Slide, DI, part number 300310-101, NSN 4810-01-187-9275. This sources sought notice is for informational purposes only and does not constitute a formal solicitation or request for proposals. The procurement falls under NAICS code 332911, and the government is evaluating the market to determine if the requirement should be set aside for small businesses or pursued through full and open competition via a firm-fixed price contract. Interested parties must submit their organization's contact details and a tailored capability statement to Courtney Minor by 4:30 PM EST on September 16, 2026. Potential providers must demonstrate the capacity to handle all labor, materials, and equipment necessary for new manufacture, including component procurement, testing, packaging, and shipping. The government will assess the financial, technical, and human capital resources of respondents to ensure they can meet the scope and scale of the requirement.

Industrial Valve Manufacturing

POSTED

about 18 hours ago

DEADLINE

FY27-2A Foreign Bearings Waiver Package Sources Sought Notice

Solicitation # FY27-2AForeignBearingsWaiverPkgSourcesSoughtforDomesticBearings

The Department of Defense, through DLA Aviation, has issued a sources sought notice to identify viable domestic sourcing for several specific National Stock Numbers (NSNs) currently determined to be foreign manufactured. This effort is conducted in accordance with DFARS 225.7009 and DFARS 252.225-7016 to ensure compliance with domestic sourcing regulations for the listed bearing components. Interested parties should note that the government may not possess or have the authority to distribute all associated technical data, though current procurement item descriptions can be provided upon request. All standard requirements for source approval, configuration control, and part numbering apply. Responses are due by September 24, 2026, under NAICS code 332991.

Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

NSN 1420016869216, GYRO-OPTICS ASSEMBLY, WSDC: 64A HELLFIRE MISSILE

Solicitation # SPE4A626R0322

This solicitation by DLA Aviation is for a Firm Fixed Price contract to procure 48 units of a Gyro-Optics Assembly for the HELLFIRE Missile, identified by part number 13688208. The procurement is designated as a Critical Application Item, with shipping, inspection, and acceptance all occurring at the origin. Lockheed Martin is listed as an approved source for this requirement. The solicitation, numbered SPE4A626R0322, will be issued on September 16, 2026, and close on September 18, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. All solicitation documents are available electronically via the DIBBS system, and no paper copies will be provided.

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

6150-Cable Assembly, Power, Electrical, Virginia Class Submarine

Solicitation # SPE4A626R0323

DLA Aviation is conducting market research to identify qualified parties capable of manufacturing a Power Electrical Cable Assembly for Virginia Class Submarines. The requirement specifically concerns NSN 6150-01-713-3680 and part numbers 8692175-4 and 1151100-103. This sources sought notice is intended to determine the most effective procurement method and whether the eventual contract will be set aside for small businesses or opened for full and open competition. Interested manufacturers must submit their capabilities, including their Cage Code, manufacturing location, and point of contact information, to Joshua Tuggle via email. This is not a formal solicitation or request for proposals, and the government assumes no financial responsibility for costs incurred during this voluntary submission process. Responses are required by September 18, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 18 hours ago

DEADLINE

Sources Sought for a potential Supply Chain Management Contract for F108 Engine Support – Mission Analysis

Solicitation # SPE4AX25RF108-0005

This Sources Sought Notice is issued by DLA Aviation to conduct market research for a potential supply chain management contract supporting the F108 engine. The government is seeking to determine if companies other than CFM International possess the capability to perform critical tasks, including assessing engine usage assumptions and life limited part limitations, updating thermal and stress models, certifying self-locking borescope plugs, and providing comprehensive program management support. The effort is intended to be supported under an existing Performance Based Logistics contract and falls under NAICS code 336413. Interested parties must submit non-proprietary responses by September 17, 2026, to Keith Allgeier. Submissions must include company identification details and demonstrate the firm's experience with the F108 engine, access to necessary engineering data, and a plan for transition and implementation. This notice is for planning purposes only and does not constitute a formal solicitation or a commitment by the government to award a contract.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

NSN 1430-012281363, CARTRIDGE, COMBINATI, WSDC: 39A

Solicitation # SPE4A727R0009

DLA Aviation is issuing a sources sought notice under solicitation SPE4A727R0009 for the procurement of 322 combination cartridges, identified by NSN 1430-012281363. The agency is seeking information on capable manufacturers, including their locations and contact details. Current approved sources include Pioneer Industries, LLC, S I T Corporation, and Arben Enterprises, Inc. Interested parties must submit their responses by September 17, 2026. Source Approval Requests must be handled via a DoDSafe link, which can be requested by emailing dlaavnsmallbus@dla.mil with the company CAGE code and the relevant NSN. The primary point of contact for this requirement is Grayson Andrews.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

DUCT ASSEMBLY, EXHAUST, LEFT HAND / NSN 1560-01-065-1906 / H1 HELICOPTER

Solicitation # SPE4A726R0807

DLA Aviation is seeking a 100% Small Business Set-Aside Indefinite Quantity Contract for the procurement of left hand exhaust duct assemblies, identified by NSN 1560-01-065-1906. The contract features a five year base period with an estimated annual quantity of 40 units. While the item is considered critical, it is not classified as a Critical Safety Item. The procurement requires contractor first article testing and adherence to export controls, with production units delivered FOB Destination and inspection occurring at the origin. The government intends to solicit and negotiate with a limited number of sources under FAR 6.302, though interested parties may submit capabilities or proposals within forty five days of the notice. Technical data is available via DIBBS, and the solicitation is expected to be issued on September 28, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Prospective contractors must be registered in the System for Award Management and should be prepared for a potential reverse auction process.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 2 months

Wire Rope Assembly; PR: 7013064751 NSN: 4010-016863942

Solicitation # SPE4A626R0140

This solicitation from DLA Aviation is for the procurement of 371 units of a Wire Rope Assembly, identified by NSN 4010-016863942. The contract is a HUBZone Small Business Set-Aside, meaning only offers from HUBZone manufacturers or dealers providing a small business manufacturer's product will be considered. The delivery schedule is set for 262 days after receipt of order, with inspection occurring at the origin and shipping terms as FOB Destination. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Offerors must provide specific design and material data according to Basic Drawing NR 19207 12649348, Revision C. Additionally, because the item requires restricted data, contractors must be certified by the DoD to access unclassified data via a submitted DD Form 2345. The solicitation is managed by Melinda Clayton and is expected to close by June 12, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Impeller Assembly [WSDC: 06F] End Item: Aircraft, Hercules C-130, PR: 7007799416 NSN: 6620-004637489

Solicitation # SPE4A626R0129

This solicitation is for the procurement of 70 Impeller Assemblies (NSN 6620-004637489) for the Hercules C-130 aircraft. The contract includes a Government First Article Test of one unit due 180 days after receipt of order, with a total production delivery schedule of 418 days. Terms are FOB Origin for both shipping and inspection. This is a total small business set-aside, and the award decision will be based on price, past performance, and other evaluation factors. Offerors must provide design drawings and data in accordance with Basic Drawing NR 13873 and must be DoD certified to access unclassified data via DD Form 2345. Higher-level contract quality requirements apply under clause 52.246-11. The solicitation is issued by DLA Aviation and is available through the DIBBS portal, with an anticipated closing date of April 10, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 1 month

INSULATION BLANKET, CABIN, AIRCRAFT / NSN 16680-01-559-2036 / CH-47 HELICOPTER

Solicitation # SPE4A727R0008

DLA Aviation is conducting market research to identify capable sources for the manufacture and supply of aircraft cabin insulation blankets, specifically NSN 1680-01-559-2036. This sources sought synopsis is intended to determine the procurement method and whether the requirement will be set aside for small businesses or opened for full competition. The scope of work includes providing all labor, materials, and equipment for new manufacture, as well as managing supply chain logistics, testing, and packaging for a five year base period. Interested parties must submit their organizational details and tailored capability statements to Christopher Rose by September 15, 2026. Because DLA Aviation does not possess complete technical data for this part, any contractor other than the currently approved source, AAR Component Services, must submit a Source Approval Request package. The government will evaluate respondents based on their technical resources, financial capacity, and ability to implement a project management plan that meets tight schedules and cost containment goals.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Makino U86 CNC Wire EDM with Turnkey Services

Solicitation # 27-15-1002

DLA Weapons Support Richmond is conducting market research to identify capable sources for a Makino U86 CNC Wire EDM for Tinker Air Force Base. The requirement is for a turn-key solution that includes the machine, technical data, shipping, unloading, rigging, installation, foundation work, IUID tagging, and training. While the government currently intends to solicit and negotiate with only one source under FAR 6.302, this sources sought notice serves to determine if a competitive procurement is warranted. Interested parties must submit their capabilities via email to the AVN IPE Market Research office by September 19, 2026. Submissions must include the tracking number 27-15-1002 in the subject line and are limited to ten single-sided pages with a minimum 10-point font. This announcement is for informational purposes only and does not constitute a formal solicitation, a request for a quote, or a commitment to award a contract.

Machine Tool Manufacturing

POSTED

DEADLINE

Supply of Specialized O-Rings for F135 Propulsion System

Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS