This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on April 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

53--SPRING,HELICAL,COMP

Closed

SPE7LX26U5946Federal

Submission Closed04/23/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M2-26-T-6614

This contract is for the procurement of five reels of No. 19 AWG electrical magnet wire, with each reel containing a nominal weight of 75 pounds. The material must be provided in one continuous length per reel, adhering to NEMA MW1000 Revision D standards. The order is designated for delivery to the USS Theodore Roosevelt (CVN 71) with a delivery timeframe of 20 days after receipt of order. The agreement mandates strict compliance with DLA packaging requirements, MIL-STD-129 marking, and MIL-DTL-12000 for preservation and packaging of cables and wires. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. The contract is subject to full and open competition and requires adherence to specific technical and quality requirements outlined in the DLA master list.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M1-26-T-320Y

Solicitation SPE7M1-26-T-320Y, issued by DLA Land and Maritime, is a request for quotations for 125 feet of electrical power cable under NSN 6145014861360. The material is required in 500 ft per spool increments. Depending on the assigned advice code, the cable must be provided in continuous lengths, with specific restrictions on whether multiple unit packs are acceptable. The required delivery date is September 2, 2026, with a delivery window of 10 days after award. Shipping is FOB Origin, and both inspection and acceptance will occur at the destination, specifically the US Army Logistics Center at Fort Sill, Oklahoma. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Technical and quality standards are governed by the DLA Master List, which takes precedence over ASTM standards. The procurement incorporates several federal regulations, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Quotations are due by September 11, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M1-26-T-321A

Solicitation SPE7M1-26-T-321A, issued by DLA Land and Maritime, is for the procurement of 1,000 feet of electrical power cable, identified as a critical application item under NSN 6145-00-434-1681 and part number M27500-24RC2S06. The requirement specifies the material must be provided in continuous lengths, with a quantity variance of plus or minus 5 percent. Delivery is required by March 20, 2027, with a need ship date of January 19, 2027, shipping FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-DTL-12000 for preservation and packaging, MIL-STD-129 for marking, and RP001 for palletization. Prohibitions are in place against the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for specific authorized functional uses. Offerors must comply with the Buy American Act and Berry Amendment restrictions and utilize the Wide Area WorkFlow system for invoicing. The solicitation is categorized under NAICS 331318 and requires compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and the safeguarding of covered defense information.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-348T

Solicitation SPE7M1-26-T-348T is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 1,500 feet of electrical wire under NSN 6145015654641. The procurement is categorized under NAICS 331318 and is managed by the Maritime Supply Chain office in Columbus, Ohio. Quotes must be submitted electronically via the DIBBS system by September 21, 2026. The delivery is scheduled for 133 days after award, with a need ship date of February 2, 2027, and a final required delivery date of May 8, 2027. The items are to be delivered FOB Origin to the DLA Distribution Depot in Oklahoma. The contract requires strict adherence to technical and quality standards, including MIL-DTL-12000 for preservation and packaging, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging data. Inspection and acceptance will occur at the destination. Offerors must comply with the Buy American Act, the Berry Amendment, and various DFARS and FAR clauses regarding cybersecurity, including CMMC Level 2 self-assessment and safeguarding of covered defense information. Payment and receiving reports must be processed through Wide Area WorkFlow. All quotes are subject to the First Destination Transportation program to optimize shipping costs.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

COMMUNICATIONS HARDWARE AND CABLING

Solicitation # 231955

The City of Los Angeles, through the General Services agency, is seeking bids for a communications hardware and cabling solicitation, identified as solicitation number 231955. This opportunity is categorized under NAICS code 331318 and will be performed within Los Angeles, California. Interested vendors must submit their responses by the deadline of September 17, 2026, at 6:00 PM. Detailed information and the bidding process are available through the City of LA Vendor Self Service Website, and inquiries can be directed to the point of contact, Barron Nguyen.

POSTED

DEADLINE

AL EX-1MA160D03-10445

Solicitation # SPEFA1-26-Q-0119

Solicitation SPEFA1-26-Q-0119 is a firm fixed price request for the procurement of one aluminum extrusion, part number 9540-LN0035826, with a minimum required length of 8 feet. The material must be Aluminum 7075-T6511 and adhere to Boeing Design Standard 1MA160D03-10445 and specification AMS-QQ-A-200/11. The award will be based on best value, considering price, past performance, and the ability to meet the delivery schedule. Delivery is required within 7 days after receipt of order, with both inspection and acceptance occurring at the destination. The item must be shipped to the DLA Receiving Officer at Naval Base Coronado in San Diego, California. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Invoicing and receiving reports must be submitted electronically via Wide Area Workflow. The solicitation was issued by DLA Aviation at San Diego, with a response deadline of September 15, 2026.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-390A

This contract is a total small business set-aside solicitation issued by the Department of Defense Fluid Handling Division for the procurement of five sediment strainers. The items must be manufactured in accordance with EB drawing 2621-713-01 assembly 223A and are identified by NSN 4730-01-320-5431. This is designated as a critical application item, and the contractor must adhere to strict environmental restrictions, including the prohibition of intentionally added mercury or mercury-containing compounds and the exclusion of Class I ozone-depleting chemicals. The procurement is governed by several technical and quality requirements, including RA001 for master requirements, RQ011 for the removal of government identification from non-accepted supplies, RP001 for packaging, and RT001 for measuring and test equipment. Delivery is required within 168 days after the order, with a need ship date of March 9, 2027, and an original required delivery date of August 11, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, which is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-348P

Solicitation SPE7M1-26-T-348P is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 500 feet of electrical wire, identified as NSN 6145003074349. This is designated as a critical application item and must be manufactured in accordance with basic specification MIL-DTL-25038/1E(2) Revision E and reference specification MIL-DTL-25038J(4) Revision J. Because the item is listed on a Primary Qualified Products List or Qualified Manufacturers List, offerors must provide the manufacturer CAGE, source CAGE, item name, service identification, and test number. The requirement is an Foreign Military Sales order for Morocco, with delivery required within five days of award. Shipping is FOB Origin, with the freight forwarder identified as V Alexander and Company Inc in Sterling, Virginia, and the final destination in Casablanca, Morocco. Packaging and marking must comply with MIL-STD-2073-1E, MIL-DTL-12000, and MIL-STD-129. Quotations must be submitted via DIBBS by September 21, 2026. The procurement is subject to domestic sourcing restrictions, including the Buy American Act and the Berry Amendment.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SPRING, HELICAL, COMPRES

Solicitation # SPE7L1-26-T-09R5

Solicitation SPE7L1-26-T-09R5 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 11 helical compression springs, identified by NSN 5360-01-046-5137. The requirement is governed by NAICS code 331318, with a required delivery date of July 8, 2027, and a need ship date of March 9, 2027. Delivery is to be made to the Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while incorporating DLA master technical and quality requirements RP001 and RA001. The procurement includes stringent environmental and safety mandates, specifically prohibiting the intentional addition of mercury or mercury-containing compounds unless specified by NAVSEA. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.225-7001 is required for quotes exceeding the micro-purchase threshold. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Inspection and acceptance will occur at the destination per FAR 52.246-1. Quotations must be submitted via the DIBBS portal by September 21, 2026.

POSTED

DEADLINE

61--CABLE,POWER,ELECTRICAL

Solicitation # SPE7M226U0467

This procurement solicitation, issued by DLA Land and Maritime, is for the supply of electrical power cables under NSN 6145012035390. The requirement consists of an initial quantity of 572 feet, with a delivery window of 80 days after the order is received. This is a qualified products list item and is designated as a total small business set-aside under NAICS code 331318. The solicitation may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. While the estimated number of orders per year is two, the contract includes a guaranteed minimum quantity of 85 units. Shipments will be directed to various CONUS and OCONUS DLA depots. All quotes must be submitted electronically by the deadline of September 24, 2026.

DLA Land And Maritime

POSTED

DEADLINE

Supply of Specialized Springs (NSN 5360011357140)

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-412C

This solicitation, identified as SPE4A5-26-T-412C, is issued by the Department of Defense ASC Supplier Oper OEM Division for the procurement of 14 units of springs under NSN 5360-01-135-7140. The contract requires delivery within 171 days after the order is placed. Performance is designated for Phoenix, Arizona, and the procurement falls under NAICS code 331318. The agreement incorporates several technical and quality requirements, including DLA packaging standards, configuration change management, and specific physical identification and marking protocols. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, with a general requirement for zero non-conformances in sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA.

ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days

AI Contract Overview

This contract involves the procurement of 14 units of a helical compression spring identified by NSN 5360004181699. The solicitation is structured as a Request for Quote (RFQ) that may lead to an Automated Indefinite Delivery Contract (IDC) with a duration of one year, or until orders reach a total value of $350,000. The contract anticipates approximately four orders annually with a guaranteed minimum order quantity of two units. Deliveries are required within 45 days after order placement, with shipments directed to various Defense Logistics Agency (DLA) depots both within Continental United States (CONUS) and Outside Continental United States (OCONUS) via consolidation points. The approved supplier sources are denoted as 81982 and 82290. Quotes must be submitted electronically by April 23, 2026, and all responsible suppliers are eligible to participate. Hard copies of the solicitation are not available, nor are specifications, plans, or drawings provided. The contract is managed by the DLA Land and Maritime office based in Columbus, Ohio, under NAICS code 331318, which pertains to other fabricated metal product manufacturing. Questions regarding solicitation details should be directed via email to the designated buyer through the contact information provided on the solicitation link hosted on the DLA’s electronic Business system.

General Info

Procurement of 14 helical springs via RFQ, one-year IDC, $350,000 max, deliveries within 45 days.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 8

Combined Synopsis

Response DeadlineApr 23

Deadline has passed

Submission Closed

04/23/2026, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Proposed procurement for NSN 5360004181699 SPRING,HELICAL,COMP: Line 0001 Qty 14 UI EA Deliver To: By: 0045 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 4. The Guaranteed Minimum quantity will be 2. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 81982 82290. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.