55 -- CONSTRUCT & INSTALL CABINETS AND MILLWORK, Thomas S. Foley U.S. Federal Courthourt Building, Spokane Washington 99201

This project is located at the Thomas S. Foley Federal Courthouse Building, 920 W. Riverside Ave, 7th Floor, Spokane, WA 99201. The General Services Administration (GSA) shall issue the solicitation for this project in an electronic format (E-mail) or U.S. mail. Access to the complete solicitation, scope of work, specifications, drawing, pictures and (any) amendments to the solicitation will be made available within the solicitation package. The request should be submitted to the Point of Contact (POC) indicated in this synopsis. The request should include the name of the contractor?s company, address, phone number, DUNS Number, the name and title of the requester, and email address. To be eligible for award, contractors must be registered and active within the Central Contractor Registration (CCR) at http://www.ccr.gov. Contractors must be able to meet all Security Requirements and Security Clearances (as identified in the solicitation package) in order to work at a Federal Building. The North American Industry Classification system (NAICS) codes: Millwork #337212 & Millwork Installation #238350. Contractor shall furnish all labor, equipment and materials required to construct and install cabinets and millwork (in strict accordance with the specifications), at the Foley U.S. Courthouse, Spokane, Washington. All work shall be performed after the normal working hours of the building unless approved otherwise by GSA. Normal working hours for building occupants are 6 am to 6 pm Monday through Friday. All work shall be coordinated with the Project Manager, Richard Harshberger. Requirements: Furnish and install millwork and cabinets in locations as shown on the drawings. Contractor is responsible to measure exact sizes prior to construction. Quality of construction and finish of millwork, bookcases, and cabinets shall be constructed equal to existing in US Magistrate Office on the 7th floor. Interior of workroom cabinets and bathroom cabinet shall be plastic laminate with wood exterior framework, doors and 1 bank of drawers. Wall between workroom upper and lower cabinets shall be covered with plastic laminate. Conference room and chambers bookcases and cabinets shall be all wood constructed of plain sliced oak or veneer as applicable. Fan-coil millwork covers along all exterior walls shall be all wood constructed of plain sliced oak or veneer as applicable. Fan-coil millwork covers shall be constructed similar to those in the US Magistrates Office on the 7th floor. (See pictures). Provide design options for selection by GSA. GSA to select finish color. Contractor shall provide submittal of cabinet and millwork elevations and material samples for approval prior to construction. All work shall be performed in accordance with the best practices of the trade. Contractor is required to control all dust and clean and vacuum as required to maintain clean appearance. Base bid shall include workroom upper and lower cabinets, bathroom cabinet, judge?s office cabinets and fan-coil millwork in judges? office and closet. Work shall include all plastic laminate countertops and plastic laminate in area between upper and lower workroom cabinets. Additive item #1 shall include conference room cabinets/bookcases and fan-coil millwork. Additive item #2 shall include fan-coil millwork in Administrative Secretaries office. Additive item #3 shall include fan-coil millwork in the two clerk?s office. Work associated with this requirement is subject to the Walsh-Healey Public Contracts Act (PCA). Attendance at the site visit is highly recommended. The project manager, Mr. Richard Harshberger (office phone: #+1 (555) 000-0000, ext. 213; after 30 November 2007, call #+1 (555) 000-0000), located in Spokane, Washington. Anticipate a one time only site visit on Tuesday, 8 January 2008 at 10:00 a.m. (PST). Interested offers should have a photo ID and meet in the GSA office lobby, U.S.P.O. Federal Building, 904 W. Riverside Ave., Room 135, Spokane, Washington 99201. Order of Magnitude for this project is between $25,000?$100,000. Performance period: Kitchen & bathroom cabinets need to be ready to install by March 31, 2008. All other units by April 30, 2008. Selection will be made based on cost/price, best value and contractor responsibleness (see elements in the Federal Acquisition Regulation (FAR) Part 9.104-1 at http://www.arnet.gov/far). The solicitation package #GS-10P-08-XC-P-0009 will be issued on 19 December 2007. The proposal due date will be on 1 February 2008. No Bonds (i.e. bid, performance or payment) are required for this proposal. This procurement is being set-aside exclusively for Small Businesses. All responsible small business sources submitting an offer will be considered.