Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

56--CLOTH, SALMON

Active
N0010426QEB02Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 64 rolls of salmon-colored cloth identified by NSN 1H-5640-016639974-X3 with TDP Version 004, to be delivered to two locations: W25G1U in New Cumberland, Pennsylvania, and W62G2T in Tracy, California, both under DLA Distribution. The Government does not own the data or intellectual property rights necessary to source this item from alternative suppliers, and it has been determined that acquiring those rights or reverse engineering the part would be uneconomical. As a result, the Government intends to proceed with a sole-source procurement under FAR 6.302-1, limiting competition to a single vendor. Although this is not a formal request for proposals, any responsible sources may submit interest, capability statements, or quotations within 45 days of the notice publication, or within 30 days if awarded under an existing Basic Ordering Agreement, and these submissions will be reviewed solely to evaluate whether a competitive procurement is warranted. The final decision to proceed without competition rests entirely at the Government’s discretion. The solicitation number is N0010426QEB02, posted on July 18, 2026, with a response deadline of September 2, 2026. The item is classified under the title “56--CLOTH, SALMON” and the contracting office is the Navsup Weapon Systems Support Mech, part of the Department of Defense, located in Mechanicsburg, Pennsylvania. The primary point of contact for inquiries is Amber C. Long, reachable via email at AMBER.C.LONG3.CIV@US.NAVY.MIL or by phone at (771) 229-0053. No set-aside type or NAICS code is specified, and the place of performance is not further detailed beyond the delivery addresses. All submissions must be received by the deadline to be considered, and no assurance is given that competition will be opened regardless of responses received.

General Info

Sole-source procurement for 64 salmon cloth rolls to Pennsylvania and California, no competition expected.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

423490 - Other Professional Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 1H-5640-016639974-X3, TDP VER 004, QTY 64 RO, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, DELIVER TO W62G2T, W1A8 DLA DIST SAN JOAQUIN, TRACY, CA 95304-5000. The Government does not own the data or the rights to the data needed to purchase / contract repair of this part from additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. All responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

Similar Contracts

Same NAICS industry code

NAICS: 423490
New
DIBBS
Commercial-Off-The-Shelf (COTS) Component Sourcing and SupplyThe contract pertains to the supply of commercial-off-the-shelf electronic components such as capacitors, resistors, and integrated circuits, all of which must comply with CAGE code 5YWX2 and adhere to strict traceability and counterfeit part prevention standards. The work is being procured under a subcontract arrangement by the Defense Logistics Agency, a component of the Department of Defense, to ensure the integrity and authenticity of components used in critical defense applications. All delivered items must be sourced from validated suppliers with documented provenance to eliminate the risk of counterfeit or substandard parts entering the supply chain. The North American Industry Classification System code 423490 indicates the contract falls under miscellaneous electronic parts and equipment merchant wholesalers, underscoring the commercial nature of the components while emphasizing their specialized military-grade requirements. The solicitation was posted on July 17, 2026, and the performance location and point of contact are not specified in the data provided, suggesting the work may be distributed across multiple vendors or fulfillment centers. The contract is accessible via the DIBBS system, confirming its alignment with Department of Defense procurement protocols and highlighting the necessity of full compliance with defense supply chain security directives.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423490
New
SLED
Supply of Spare Parts for Teledyne API InstrumentsThe contract is for the supply of genuine spare parts including pumps, valves, sensors, and other components required for Teledyne API T750U, T751H, and related environmental monitoring systems used by the Florida Department of Environmental Protection. These parts are essential for maintaining the operational integrity and accuracy of monitoring equipment deployed across the state’s environmental surveillance network. The contract is classified as a subcontract under NAICS code 423490, which pertains to other miscellaneous nondurable goods merchant wholesalers, indicating the procurement is for distribution of specialized industrial components rather than direct manufacturing or system integration. The solicitation was posted on July 16, 2026, with a response deadline of August 6, 2026, allowing potential vendors sufficient time to prepare and submit proposals. Although no specific set-aside status or organizational type is designated, the procurement is managed by the Florida state agency, and the place of performance is tied to its operational needs across the state. All parts must be authentic, factory-original components to ensure compatibility, reliability, and compliance with regulatory standards for environmental data collection. Vendors are expected to demonstrate capability in sourcing, inventory management, and timely delivery of critical spare parts for sensitive monitoring instrumentation.
Department of Environmental Protection

POSTED

2 days ago

DEADLINE

in 19 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 811210
New
Federal
58--COMMUNICATIONS BAR, IN REPAIR/MODIFICATION OFThe Government intends to award a sole-source contract for two units of NSN 7H-5895-017200407, a communications bar requiring repair or modification, under FAR 6.302-1 due to the unavailability of competitive sourcing options. The Government does not own the data or intellectual property rights necessary to procure repairs or replacements from other sources, and acquiring those rights or reverse engineering the part has been deemed uneconomical. While the solicitation is not a request for competitive proposals, responsible sources may submit capability statements or proposals within 45 days of the notice publication, or 30 days if under an existing Basic Ordering Agreement, to inform the Government’s decision on whether to proceed without competition. All submissions will be evaluated solely for the purpose of determining if a competitive procurement is warranted, and the Government retains full discretion in deciding not to open the procurement to competition. The contract is associated with title 58—COMMUNICATIONS BAR, IN REPAIR/MODIFICATION OF, solicitation number N0010426QYABF, and is administered by the Navsup Weapon Systems Support Mech office located in Mechanicsburg, Pennsylvania. The point of contact for inquiries is Amelia E. Harper, reachable via email at AMELIA.E.HARPER.CIV@US.NAVY.MIL or phone at (771)229-4504. The notice was posted on July 18, 2026, with a response deadline of August 3, 2026. Supplies will be delivered FOB origin, meaning the vendor is responsible for preparing the items for shipment but not for transportation costs or risks beyond the point of origin. No set-aside status is designated, and the contract is issued under a presolicitation notice that does not obligate the Government to award a contract unless a decision is made to proceed with sole-source procurement based on the received responses.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335311
New
Federal
61--CABLE ASSEMBLY,SPECThis contract solicitation, numbered N0010426QNA17, issued by NAVSUP Weapon Systems Support Mech in Mechanicsburg, PA, seeks qualified manufacturers to produce the CABLE ASSEMBLY,SPEC under emergency acquisition flexibilities, with award to be made bilaterally upon contractor acceptance. The requirement is set aside for small businesses with NAICS code 335311 and is subject to the Defense Priorities and Allocations System (DPAS) as a rated order, requiring compliance with the Notice of Priority Rating for National Defense. The contract mandates strict adherence to engineering drawings including 5893729, 5894148 Rev J, and others, with configuration control governed by MIL-STD-973 and all changes requiring formal government approval. Suppliers must possess a government security clearance and authorized access to classified documents under DD Form 254. The cable assemblies must be manufactured to exact specifications, including serialization per NAVWC Newport instructions, physical marking in accordance with MIL-STD-129 and MIL-STD-130, and strict prohibition of mercury contamination, with any intentional inclusion requiring prior written approval and warning labeling. Production requires preproduction testing of two units each of specified cable types per DWG 5894148 Rev J, followed by lot testing and quality conformance inspections, with all results documented using DD Form 1423. A one-year warranty from date of delivery applies, and compliance with ISO 9001 quality systems is mandatory. Contractors must submit Certificates of Compliance and Quality Compliance CDRLs to NUWC Newport, and a post-award conference is recommended. The solicitation includes an option for an additional 365 days of supply quantity post-award, with evaluation based on lowest aggregate total price including the option. Delivery is required to be fulfilled within five working days for CLINs 0001AA and 0001AB, with payment instructions tied to the WIDE AREA WORKFLOW system using Stand-Alone Receiving Reports for material. All submissions must be received by August 17, 2026, and offerors must acknowledge receipt of amendments, with the government retaining rights to inspect at any point during performance to verify conformity.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 339940
New
Federal
75--MARKER,TUBE TYPEThe contract pertains to the procurement of a 75–Marker, Tube Type under solicitation N0010426QBZ55, with a response deadline of August 17, 2026, and is managed by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The solicitation invokes a comprehensive set of clauses and technical requirements, including mandatory use of Workflow Pro, adherence to Safety Data Sheets and Globally Harmonized System labeling for hazardous materials, and strict compliance with the Individual Repair Part Ordering Data (IRPOD), which governs technical specifications, quality control, and packaging standards. The IRPOD is binding and must be reviewed by vendors prior to submission, with precedence given to contract amendments, the schedule of supplies, terms and conditions, and then the IRPOD in case of conflicts. Documentation must be obtained from the BPMI e-Commerce portal, and any deviation from specified revisions requires written approval from the Contracting Officer. The contract mandates full compliance with MIL-PRF-23199 packaging standards, particularly regarding heat-sealed envelopes for cleanliness-controlled parts, and prohibits the use of mercury or mercury-containing compounds. Quality assurance is governed entirely by the IRPOD, requiring contractors to maintain complete inspection records available to the Government throughout performance and beyond. Pricing for the quotation is valid for 60 days after the closing date unless otherwise specified, and all contractual documents are considered issued upon electronic transmission via email, fax, or other recognized methods. Technical Data Package (TDP) requirements, including submission of Test and Inspection Reports under DI-QCIC-8872 and Cure Date Certificates under DI-MISC-81318, must be submitted per the contract delivery schedule and only after receiving authorization from the Post Award Contracting Officer. Each submission must correspond to a unique combination of Contract Number, National Stock Number, and Item Nomenclature. The DD Form 1423 governs data delivery, specifying submission timelines, inspection and acceptance codes, distribution restrictions, and price group classifications. Distribution of technical documents is limited per DoDI 5230.24 codes, with certain materials restricted to U.S. Government use only. All commercial product representations and small business certifications are subject to the latest deviation templates effective February 2026, and cybersecurity maturity model certification levels are required under a November 2025 notice. The contract further enforces veteran and disability hiring equity mandates, priority ratings for
Office Supplies (except Paper) Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 811210
New
Federal
59--ELECTRONIC COMPONEN, IN REPAIR/MODIFICATION OFThe U.S. Navy’s Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, intends to award a sole-source contract to WARD LEONARD CT LLC for the repair of two electronic components identified by NSN 7H-5998-013160668-GL and part number 948E332G1, intended for the Sub Engineering Systems. This repair requirement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302 due to the exclusive status of the vendor as the Original Equipment Manufacturer, with no other sources capable of performing the repair without access to proprietary data or designs solely held by the contractor. The Government does not own the technical data rights necessary to obtain support from alternate suppliers, making this source the only viable option. Deliverables are to be shipped to W25G1U, W1A8 DLA Distribution in New Cumberland, Pennsylvania, with UID requirements and Buy American Act clauses applicable. The procurement will proceed under FAR Part 15 using negotiated procedures and will not follow commercial item acquisition policies under FAR Part 12. The solicitation, identified as N0010426QYABY, is anticipated to be released on July 31, 2026, with proposals due by August 31, 2026, and an award targeted for September 15, 2026. The contract duration will be one year, and all submissions must be made electronically via the Navy Electronic Commerce Online (NECO) portal; no hard copies or telephone inquiries will be accepted. While the notice initially indicated a Total Small Business Set-Aside, the contract data reflects that this classification is not accurate, and the procurement is not restricted to small businesses. All responsible parties may submit capability statements within 45 days of the synopsis publication for consideration, though no competitive solicitation is planned unless new evidence emerges that contradicts the sole-source justification. Interested vendors must contact Taylor Weidman at taylor.m.weidman2.civ@us.navy.mil to express capability, and all responses will be evaluated solely to determine whether competition is feasible.
Electronic and Precision Equipment Repair and Maintenance

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336390
New
Federal
ROD,TIEThis contract specifies the procurement of a tie rod designated as SPECIAL EMPHASIS material (Level I) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the ship itself. All materials must comply with NAVSEA drawing 566-6985426 and conform to ASTM-A193 Grade B7, with stringent requirements for quantitative chemical and mechanical analysis, non-destructive testing via liquid penetrant or magnetic particle inspection, and full traceability from raw material through final assembly. Certification data must be submitted via WAWF to Portsmouth Naval Shipyard (DODAAC N50286) for review and prior acceptance before any shipment, with electronic submissions required for all quality evidence including test reports, weld qualifications, and compliance certificates. Electronic signatures are accepted as legally binding, provided they are uniquely controlled and auditable, and certification statements must be unqualified and positive without disclaimers. The contractor must maintain a quality system per ISO-9001 with calibration controls in accordance with ISO-10012 or ANSI-Z540.3 and is subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All manufacturing, machining, welding, and subcontracting activities must adhere to specified Navy standards such as S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with welding procedures and qualifications submitted for approval prior to implementation. Traceability is mandatory throughout the supply chain, requiring permanent marking of all components with heat-lot identifiers linked to certified test reports, and strict segregation of traceable materials to prevent commingling. Any changes or deviations require formal waiver requests approved by the Contracting Officer and documented in ECDS. Material must be mercury-free, properly packaged per MIL-STD-2073, and submitted with complete documentation including 100% verification of certification data, markings, and acceptance records; delivery is capped at 365 days after contract effective date, and the order is classified as a "DO" rated priority under the Defense Priorities and Allocations System for national defense use.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332991
New
Federal
BEARINGThis contract pertains to the procurement of a specialized bearing designated as SPECIAL EMPHASIS material (Level I), critical to shipboard systems where failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The bearing must strictly conform to Kamatics part number KNR20-CNV-88 and satisfy stringent requirements regarding material composition, mercury-free content, configuration control, and traceability throughout manufacturing and subcontracting processes. All materials must be permanently marked for traceability to Objective Quality Evidence (OQE) in accordance with MIL-STD-792, and any loss of marking during production requires a documented control procedure to prevent commingling or loss of accountability. The contractor must maintain an ISO-9001 quality system with calibration compliance to ISO-10012 or ISO/IEC 17025, or an acceptable alternative per MIL-I-45208 and MIL-STD-45662, subject to Government evaluation and audit at any time during production. Government Quality Assurance representatives will conduct inspections at source, and all subcontractors must be notified of these requirements and include the same inspection clauses in their purchasing documents. Delivery is contingent upon a rigorous certification process: all certification data must be submitted via Wide Area WorkFlow (WAWF) 20 days prior to shipment and receive formal acceptance from Portsmouth Naval Shipyard before any material is shipped. The Certificate of Compliance must be comprehensive, showing traceability of each unit to its OQE, including NSN, manufacturer details, lubricants, cure dates, and explicit affirmation of compliance with all contract requirements—no disclaimers are permitted. Final inspection requires zero-defect acceptance per ANSI/ASQ Z1.4, with 100% verification of all certification documents. Any deviations or waivers—classified as Critical, Major, or Minor—must be submitted electronically to the NAVSUP WSS Contracting Specialist and approved before implementation, with full documentation forwarded with the material. The contract mandates strict adherence to Buy American and Free Trade Agreement provisions, prohibits foreign disclosure of controlled technical data, and requires compliance with all referenced military and industry standards including SS800-AG-MAN-010/P-9290 for non-metallic material toxicity and flammability. The warranty covers one year from the date of last delivery, and the entire procurement operates under DPAS priority rating for national defense.
Ball and Roller Bearing Manufacturing

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
Federal
48--VALVE,SAFETY RELIEF, IN REPAIR/MODIFICATION OFThe U.S. Government, through NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania, intends to procure the repair of a single safety relief valve, NIIN 014870393, part number SW144B02E0067, on a sole source basis from Emerson Automation Solutions, the original equipment manufacturer and only known source capable of performing the repair. No technical data or drawings are available, and the government does not own the rights to any proprietary information required for alternative sourcing. This procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, and award is anticipated to be made exclusively to Emerson Automation Solutions unless a compelling alternative is presented. The contract will be valid for one year, with UID requirements and Buy American provisions applicable. Although the notice initially indicates a Total Small Business Set-Aside, the underlying procurement context contradicts this, as the sole source restriction precludes competition. The solicitation will be issued electronically via NECO on or around July 31, 2026, with proposals due by August 21, 2026, and an anticipated award date of September 16, 2026. Interested parties may submit capability statements by email to Taylor Weidman within 15 days of the notice, but no competitive procurement is anticipated unless new commercial item proposals emerge. No hard copies or telephone inquiries will be accepted.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 333618
New
Federal
STARTER,ENGINE,AIRThis contract solicitation, identified as N0010426QXB78, seeks a firm-fixed-price repair service for the STARTER, ENGINE, AIR, issued under Emergency Acquisition Flexibilities by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement mandates strict adherence to MIL-STD packaging and Government Source Inspection, with all freight terms FOB Origin. The contractor must be an authorized distributor of the original equipment manufacturer and must provide written authorization from the OEM if not the manufacturer. Compliance with Item Unique Identification (IUID) requirements under DFARS 252.211-7003 and marking per MIL-STD-130 Rev N is mandatory, along with full traceability and documentation of all repair costs, including profit rates, delivery lead time, and a 90-day minimum quote expiration. The contract includes an optional increase of up to 100% of the original quantity, exercisable unilaterally by the government within 365 days of award under FAR 52.217-6, and requires acceptance of this option in the quote. The evaluation will prioritize price as the primary factor, followed by past performance and supplier performance risk under DFARS 252.204-7024. All quotations must be submitted electronically to russell.w.kreider.civ@us.navy.mil by the deadline of August 17, 2026. The contractor is responsible for full inspection and quality assurance throughout the repair process, maintaining records for one year after final delivery, and must not substitute any parts without prior written approval from the Contracting Officer, with any changes classified under specific code designations. The item must be repaired to meet the original design specifications and include coverage for all potential issues such as incomplete, damaged, or missing components. Only repairs are acceptable — test and evaluation quotes will be rejected. All documentation and proprietary information provided by the Navy must be safeguarded according to their designated distribution statements, and the awardee must ensure compliance with all security prohibitions, small business subcontracting obligations, and mandatory use of Workflow Pro and Wide Area Workflow payment instructions.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 331420
New
Federal
PIPE,METALLICThis contract, issued under solicitation number N0010426QFF36 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, mandates the supply of metallic pipe meeting stringent military specifications for critical shipboard applications. The material, designated as SPECIAL EMPHASIS Level I, must comply with MIL-P-24691/3 for corrosion-resistant stainless steel seamless pipe of 1-inch nominal size and Schedule 80, with strict requirements for ultrasonic and shear wave testing, chemical and mechanical certification per DI-MISC-81020, and full traceability from heat lot to final product. All items must be seamless, free from mercury contamination, and marked permanently and temporarily per MIL-STD-792 and SAE AMS standards, with traceability numbers directly linked to certified test data. Material must originate from single heats if fewer than five pieces are supplied, and any deviation from specifications requires formal approval via the ECDS system. The contract enforces rigorous quality assurance protocols, including mandatory ISO-9001 and ISO-17025-compliant quality systems, with documented procedures subject to government audit. All certification documentation, including test reports and certificates of compliance, must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with delivery scheduled for 365 days post-certification acceptance. Government inspection occurs at destination, and acceptance is contingent upon 100% verification of traceability markings, certification completeness, and zero-defect sampling per ANSI/ASQ Z1.4 for lot acceptance. The award process is CLIN-specific, allowing for multiple vendors, and prohibits quantity discounts across combined CLINs. The contract includes full Buy American, Small Business Set-Aside, and Warranty provisions, with a 365-day warranty period following acceptance. Contractors must submit engineering change proposals for any configuration changes and adhere to strict documentation, data submission, and security protocols as directed by NAVSEA and Navy directives, with all submissions routed through ECDS and WAWF systems.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 339113
New
Federal
42--FILTER ASSEMBLY,GASThe contract pertains to the procurement of a Gas Filter Assembly under solicitation N0010426QBZ54, issued by NAVSUP Weapon Systems Support Mech, with a response deadline of August 17, 2026. It mandates strict adherence to technical and quality requirements defined in the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and serves as the primary reference governing compliance. The contract enforces a defined order of precedence for resolving document conflicts, placing contract amendments and schedule specifications above referenced standards, drawings, and technical data. All referenced documents must be used in their entirety at specified revisions, and any deviation or waiver request must include detailed justification, technical data, and approval from the Government Quality Assurance Representative before submission to the Contracting Officer. The supplier is required to maintain a government-acceptable inspection system and retain all inspection records for the duration of performance and beyond. Packaging requirements are governed by MIL-PRF-23199 and related standards, with specific clarifications for the use of MIL-DTL-24466 green poly bags under cleanliness control conditions, while fire-retardant packaging is no longer required. Delivery must be accompanied by a Certificate of Compliance per DI-MISC-81356, issued separately for each unique contract, stock number, and nomenclature combination. The contract prohibits the intentional use of mercury in any component and mandates compliance with cybersecurity maturity model certification, equal opportunity protections for veterans and workers with disabilities, and priority rating for national defense use. Pricing is valid for 60 days after the closing date unless otherwise specified, and all contractual documents are deemed issued upon electronic transmission. Technical data packages and delivery formats are governed by DD Form 1423 requirements, including specific distribution statements and data submission frequencies, with final submissions due at the end of contract performance. The vendor must register with the BPMI e-Commerce portal to access critical technical documents and ensure full compliance with all naval specifications and security protocols.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 335313
New
Federal
59--MODULE,SWITCH, IN REPAIR/MODIFICATION OFThis contract pertains to the repair and modification of the MODULE, SWITCH with part number 5M00A69 under solicitation N0010426RYAA7, issued by NAVSUP Weapon Systems Support Mech. The work requires strict adherence to MIL-STD-129 for marking and MIL-STD-2073 for packaging, with all repairs performed in accordance with the contractor’s established technical procedures, drawings, and government-approved directives. The item must meet operational requirements tied to CAGE code 12522 and reference number 5M/0069, and no substitutions or design changes are permitted without prior written approval from the NAVICP-MECH Contracting Officer, with specific codes defining the nature of any allowed modifications. Mercury is strictly prohibited in any form unless explicitly approved, with detailed justification and protective measures required for any approved use, and contamination detection protocols mandate air sampling with a threshold of 0.01 mg/cu meter to ensure compliance. All inspection and testing must follow the original manufacturer’s specifications, and records must be maintained for 365 days after final delivery. The contract mandates compliance with a range of regulatory clauses including Buy American requirements, safeguarding of conventional arms and explosives, security prohibitions, and small business subcontracting obligations, though a set-aside was not deemed applicable. The repair work must be performed under a fixed-price or time and materials pricing structure, with final proposals due by August 17, 2026. Transportation by sea is applicable, and payment instructions follow Wide Area Workflow protocols. All contractual documents are deemed issued upon electronic or mailed delivery, and acceptance of the proposal constitutes a binding agreement. Technical documents referenced must be obtained through official DOD sources, with special handling required for NOFORN and classified materials. The point of contact for inquiries is listed with email and phone details, and performance is expected to meet the rigorous standards of naval submarine and surface ship environments, where contamination or noncompliance could pose serious operational and safety risks.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details