Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

58--PROCESSOR,SIGNAL DA

Awarded

SPRPA125REL30Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a processor, signal, designated as 58--PROCESSOR,SIGNAL DA under solicitation number SPRPA125REL30, issued by the Department of Defense through the Pa DLA Aviation office in Philadelphia, Pennsylvania. The opportunity was posted on July 17, 2026, and is classified as an award notice, indicating that a contract has been awarded rather than being open for competition. The North American Industry Classification System code 334419 identifies the category as other electronic component manufacturing, suggesting the item involves specialized electronic hardware. No specific set aside designation is listed, meaning the award was not restricted to particular small business categories. The place of performance is unspecified in the provided data, and the primary point of contact for inquiries is Keli Barish of the DLA Aviation office, reachable via email at KELI.BARISH@DLA.MIL or by phone at (215) 737-3861. The contract is administered from the DLA office located at 19111-5098 in Philadelphia, PA, with no further details on delivery timelines, quantities, or financial value provided.

General Info

DLA Aviation seeks fixed-price signal processor, AS/EN/JISQ 9100 compliance, warranty, electronic proposals, federal regulations.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

Contract Value

$12,012,815

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Awardee

Sierra Nevada Company, LLCView Profile

Award Issued Date

07/16/2026, 12:00:00 AM UTC

Documents

(1)

SPRPA126CUA14_Redacted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseAwarded

PostedMay 15

Presolicitation

Type ChangedJun 3

Presolicitation → Solicitation

Amendment 1Jul 3

Contract was updated

Justification (J&A)Jul 20

Justification & Approval published

AwardedJul 16

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

View Agency Profile

Office AddressPHILADELPHIA, PA, 19111-5098, USA

Contacts

KELI BARISH

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=44e3518791b842a49f7a677c020a8ac8

Similar Contracts

Same NAICS industry code

Push Switch (NSN: 5930013749341) Manufacturing and SupplyThe contract entails the manufacturing and delivery of a military-spec push switch with the National Stock Number 5930013749341, requiring strict adherence to technical specifications, environmental standards, and packaging requirements defined for defense applications. The product must meet all military-grade performance criteria to ensure reliability under extreme conditions, including durability, shock resistance, and operability in challenging climates. Compliance with relevant defense regulations and quality control protocols is mandatory throughout production and final inspection. The solicitation is issued as a subcontract under the NAICS code 334419, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is to be carried out at an FPO location with ZIP code 09573, indicating delivery to a military postal facility, likely supporting overseas operations. The contracting activity is managed by the Electrical Devices Division within the Department of Defense, emphasizing the critical nature of this component in defense systems. No set-aside provisions are specified, and the offeror must be prepared to fulfill all contractual obligations without regard to small business preferences.

ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-13NF

This contract is for a special-purpose electrical cable assembly designated as P/N 11449241-17 with NSN 6150-01-271-1297, with a quantity of 29 units to be delivered within 204 days after contract award. The item contains technical data subject to strict export controls under either ITAR or EAR, making any disclosure to foreign persons—regardless of location—subject to prior authorization from the U.S. Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on proper handling of export-controlled technical data, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-13NF, posted on August 5, 2026, with responses due by August 13, 2026, under NAICS code 334419. The contract is managed by the Department of Defense’s ASC Commodities Division, with performance occurring in New Cumberland, Pennsylvania, and primary points of contact handled by Daniel Bailey at the provided email and phone number.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M8-26-T-5719

The item requested is a PUSH SWITCH with NSN 5930-01-031-4714, quantity of 51 units, under purchase request 7017495506, with a delivery requirement of 20 days after order date. This procurement is governed by Department of Defense contracting mechanisms and is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with the item cannot be disclosed or transferred to foreign persons, regardless of location, without prior authorization from the Department of State or Department of Commerce. The Defense Logistics Agency restricts access to such technical data exclusively to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory training on handling DOD export-controlled technical data and approved through official DLA channels. The solicitation number is SPE7M8-26-T-5719, posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 334419. The contracting office is the Electrical Devices Division within the Department of Defense, with Kathleen Moore listed as the primary point of contact. The place of performance and delivery location are not specified beyond the United States, and the acquisition is not set aside for any specific small business category.

ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE7M8-26-T-5716

This contract pertains to the procurement of a PUSH SWITCH with NSN 5930-01-536-3060, under solicitation SPE7M8-26-T-5716, requiring five units to be delivered FOB origin within 360 days. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with hazardous materials subject to FED-STD-313 and TQ requirement IP025. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. Mercury and mercury-containing compounds are prohibited unless functioning in batteries, fluorescent lamps, sensors, weapon systems, or approved chemical reagents, with portable mercury devices required to have shockproof construction and secondary containment per NAVSEA 5100-003D. The contract includes a First Article Test line item requiring one unit for government testing, with no separate charge assumed unless specified. Inspection and acceptance occur at origin, with strict quantity variance limits of plus or minus zero percent. All labeling, packaging, and unit of issue must follow DoD standards, with delivery directed to the DLA Distribution facility in New Cumberland, PA. The solicitation response deadline is August 17, 2026, and the contract is governed by FAR clauses referencing first article testing requirements.

ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

WIRING HARNESS, BRAN

Solicitation # SPE4A6-26-T-12UF

The contract pertains to the procurement of a single unit of a branched wiring harness identified by NSN 6150-00-394-4934 under solicitation SPE4A6-26-T-12UF, with a delivery requirement of 58 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes classified as critical, major, or minor corresponding to specific verification levels or AQLs. All technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the Department of State or Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization may access such data. The contract is issued by the Department of Defense’s ASC Commodities Division with performance at New Cumberland, Pennsylvania, and all inquiries should be directed to the primary point of contact, Alliyah Richmond.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-12SP

The contract is for the procurement of four wiring harnesses identified by NSN 6150-01-494-3534, with a delivery requirement of 170 days after order issuance. The solicitation number is SPE4A6-26-T-12SP, posted on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 334419 and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is specified as Barstow, California, with Alliyah Richmond listed as the primary point of contact. The contract mandates compliance with CMMC Level 2 requirements as certified by a Third-Party Assessment Organization and permits the use of Certificate of Conformance procedures unless explicitly withheld by a Quality Assurance Letter of Instruction. The technical data associated with this wiring harness is subject to U.S. export control regulations under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign national employees and subsidiaries. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access controlled data. All handling, storage, and transmission of technical documentation must adhere strictly to these restrictions to prevent unauthorized export or disclosure.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

WIRING HARNESS, BRANCHE

Solicitation # SPE7L1-26-T-917E

The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

ADAPTER SET, AIRCRAF

Solicitation # SPE4A0-26-T-4174

The contract is for one adapter set for aircraft with NSN/Part Number 4920-01-727-5259, issued under solicitation SPE4A0-26-T-4174 with a response deadline of August 13, 2026, and a required delivery within five days of award. The item is subject to multiple technical, quality, and export control requirements as defined by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers including RP001 for packaging, RT001 for measuring and test equipment, RD002 for covered defense information, and RQ001, RQ009, RQ011, RQ017, and RQ032 governing inspection, acceptance, removal of government identification, item marking, and export control of technical data. Technical data associated with this item is controlled under ITAR or EAR, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA authorization. The contracting entity is the Department of Defense via the Aviation Supply Chain ESOC Buys office, with Danita Davis listed as the primary point of contact, and the purchase request number is 7017709664.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-13NZ

This contract pertains to a special-purpose electrical cable assembly identified by NSN 6150-01-493-2645, with a quantity of 27 units required under purchase request 7017739714. Delivery is due within 230 days after contract award. The solicitation, numbered SPE4A6-26-T-13NZ, was posted on August 5, 2026, with responses due by August 13, 2026, and is managed by the ASC Commodities Division of the Department of Defense. Performance will occur in New Cumberland, Pennsylvania, 17070-5002, with Berkeley Vaughan designated as the primary point of contact. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including provisions for cybersecurity compliance at CMMC Level 2, physical item marking, and inspection and acceptance at origin. Export control regulations under ITAR or EAR apply to technical data associated with this item, restricting disclosure to unauthorized foreign persons regardless of location and mandating compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire and received explicit authorization. Packaging must adhere to DLA specifications, and non-accepted items must have all government identification removed. The NAICS code 334419 indicates classification under Other Electrical Equipment and Component Manufacturing.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A0-26-T-4070

The contract solicitation SPE4A0-26-T-4070 issued by the Defense Logistics Agency under the Department of Defense’s Aviation Supply Chain ESOC Buys seeks a single unit of a BUS, CONDUCTOR with NSN 6150014928036 to be delivered to Naval Station Newport, Rhode Island, within five days of order issuance, with a required delivery date of January 17, 2025. Delivery is FOB origin, inspection and acceptance occur at destination, and the item must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and labeling per government standards. No special marking is required, and palletization must meet DLA Packaging Requirements for Procurement (RP001). Mercury or mercury compounds are strictly prohibited in the item, its preservation, packaging, and labeling, except for specific functional uses as defined by NAVSEA 5100-003D. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted in the sample lot unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates numerous technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R-numbers, including physical identification, documentation for source approval, configuration change management, and requirement for a Cybersecurity Maturity Model Certification Level 2 Self-Assessment. Compliance with FAR and DFARS clauses applies, including safeguarding covered defense information, combating trafficking, employment eligibility verification, sustainable products, hazard communication, and prohibitions on hexavalent chromium and covered defense telecommunications equipment. Invoicing must be processed through WAWF, and the contractor must represent socioeconomic status, maintain a UEI, and disclose any covered defense telecommunications items provided under the contract. The contract type is not specified, pricing is blank with no unit or total price stated, and no evaluation factors, Section M, or detailed scope of work in Section C are provided in the solicitation. The only point of contact listed is Danita Davis at DLA, and all proposals must be submitted electronically via the DIBBS portal by August 4, 2026.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

FILTER SUBASSEMBLY

Solicitation # SPE7M1-26-T-207A

The contract is for the procurement of a FILTER SUBASSEMBLY under solicitation SPE7M1-26-T-207A, with a quantity of 29 units to be delivered FOB origin within 58 days, targeting a need ship date of June 9, 2026. The item is identified by NSN 5915-01-604-0111 and part number 5002930, with a unit price of $29.00 and no variance allowed in quantity. Delivery must adhere to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied. Packaging and palletization must follow DLA’s procurement requirements, and hazardous material handling complies with IP025. Inspection and acceptance occur at the destination, specifically at the DLA Distribution San Joaquin warehouse in Tracy, CA. Sampling and quality verification must align with MIL-STD-1916 or ASQ H1331 Table 1, applying zero-defect acceptance unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The use of any Class I ozone-depleting substances is strictly prohibited in manufacturing or processing without written approval from the contracting officer, and this restriction overrides any conflicting specification unless the item qualifies as a commercial item under FAR 11.001 or is a part-numbered-only item. Technical data provided is for reference only and not complete; the delivered item must meet all referenced requirements as well as the part number specifications. The contract is issued under DLA’s authorized unit of issue and falls under NAICS code 334419, managed by the Department of Defense’s Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-T-12SF

The contract is for a special-purpose electrical cable assembly, identified by NSN 5995015922049 and part number NF24Q100, with a total quantity of 8,881 feet to be delivered within 170 days FOB origin. The unit of issue has been changed to feet effective May 1, 2015, with a 1:12 conversion ratio, and delivery must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, materials, and marking per MIL-STD-129 without special markings. The contract allows for a 10% variance in quantity and requires inspection and acceptance at the destination. Packaging must also adhere to DLA’s procurement requirements, including palletization guidelines, and all supplies must be physically identified per RQ017. Sampling for quality verification must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; acceptance requires zero non-conformances unless otherwise specified. The cable assembly is designated a critical application item, and cybersecurity compliance is mandated through CMMC Level 2 self-assessment. The solicitation is a total small business set-aside under NAICS code 334419, issued by the Department of Defense’s ASC Commodities Division, with performance at Tinker AFB and point of contact Berkeley Vaughan. Technical and quality requirements are governed by the DLA Master List, and the contract is subject to covered defense information provisions as well as restrictions on removal of government identification from non-accepted supplies.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

COUPLING,SHAFT,RIGI

Solicitation # SPRPA126QRC42

This solicitation for a rigid shaft coupling under SPRPA126QRC42 is issued under Emergency Acquisition Flexibilities and requires government-approved sources only; proposals from unauthorized distributors or non-approved suppliers will be rejected outright. All submitted items must be newly manufactured with no refurbished, remanufactured, or repaired materials permitted. The acquisition involves FMS customer-owned spares that are never owned by the U.S. Government or entered into the DoD supply chain, exempting them from Item Unique Identification and Valuation requirements per NAVSUP WSS N2 guidance, though Critical Safety Items are subject to identification under DFARS 252.209-7010. Delivery is governed by FMS-specific shipping instructions and transportation by sea, with warranty provisions requiring 12 months of coverage and 45 days after discovery for claims. Buy American and related certification requirements apply, and contractors must comply with security prohibitions, equal opportunity mandates for veterans and workers with disabilities, and mandatory use of Workflow Pro Assist Module. Invoicing follows a combined invoice and receiving report format, and all offers must include proof of authorized distributive status from the approved manufacturer on official letterhead. Government source approval is mandatory, and technical data or drawings are not provided. Compliance with integrity of unit prices, value engineering, and contractor business systems is incorporated by reference, with inspections conducted at the source under Product Verification Testing provisions.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 22 hours ago

DEADLINE

REMOVABLE STORAGE (

Solicitation # SPRPA126QZB40

This solicitation, issued under Emergency Acquisition Flexibilities Authority, seeks removable storage solutions under NAICS code 333998 with a size standard of 1,250 employees, and is designated as a critical application item. The contract requires full compliance with numerous federal acquisition regulations including mandatory use of Workflow Pro’s Assist Module, strict adherence to Buy American provisions under the Free Trade Agreements and Balance of Payments Program, and certification of recovered material content for EPA-designated products. The contractor must also ensure equal opportunity for veterans and workers with disabilities, implement item unique identification and valuation procedures, and follow WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS linked to the invoice and receiving report combo referenced under SPRPA1. Transportation of supplies by sea is permitted, and royalty information must be provided as required. No drawings are available, and the acquisition is being conducted under urgent conditions with a response deadline of August 17, 2026. The contract is administered by the Department of Defense’s Defense Logistics Agency Aviation office in Philadelphia, with Jonathan M. Rivera as the primary point of contact.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVB77

This contract specifies requirements for the manufacture and delivery of shipping and storage containers under solicitation SPRPA126RVB77, with primary emphasis on rigorous quality control, material standards, and manufacturing procedures. The container must be fabricated from aluminum in strict accordance with Container Research Corporation drawing number 05259-612E001, latest revision, and all referenced specifications, including MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID must be procured from NAVICP, and compliance with MIL-STD-2073 for packaging is required. Welding processes must adhere to MIL-W-22248 Class 4 for aluminum, with specific filler materials (4043 for 6061 alloy, 5356 or 5556 for 5000 series), and welders must be qualified under MIL-STD-1595A. Surface preparation demands chemical deoxidization with approved acid solutions no more than 10 days prior to welding (reduced to 3 days under outdoor exposure), followed by mechanical cleaning using approved methods only. All welds must be inspected visually with 5X magnification where necessary, and critical welds may require dye penetrant testing. Desiccant must be included per cubic foot of interior volume per MIL-D-3464 Type II, and cadmium plating is prohibited—replaced by zinc-nickel alloy finish per ASTM B841. The contract mandates a First Article Test (FAT), requiring the contractor to submit one unit within 120 calendar days to a designated government facility for dimensional, functional, leak, and drop testing. The FAT includes a 18-inch free fall test, pneumatic pressure leakage verification, form and fit evaluation, and compliance verification with drawing 612E001. The contractor bears all costs related to FAT submission, testing, repairs, and shipping, with government testing estimated at $12,000. Approved FAT units may be counted as production items only if undamaged and approved by the QAR. Suppliers must certify that production occurs in the same facility as the FAT unit. Waivers to FAT are available only to vendors with identical prior deliveries within three years, using the same processes and facilities, and must be accompanied by dual pricing. 100% production leak testing is required for every unit using Federal Test Method

Other Metal Container Manufacturing

POSTED

about 22 hours ago

DEADLINE

28--VALVE,BLEED START

Solicitation # SPRPA126QYC95

The contract solicitation pertains to the procurement of 57 newly manufactured bleed start valves, identified by NSN 0R-2840-016666867-B8 and reference number 5146T31P01, with delivery terms set at FOB origin. This procurement is classified as an emergency acquisition under FAR 5.202(a)(2), which waives the synopsis requirement due to urgency, and is structured as a sole-source action under FAR 6.302-1. Only government-approved sources of supply are eligible for award; refurbished, remanufactured, or repaired items are unacceptable. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is flight-critical and requires government source approval prior to award, as the technical data necessary for full and open competition is either inadequate or exclusively held by the approved source, and the qualification of a new supplier would delay delivery beyond operational needs. Offerors must comply with DFARS clauses 252.209-7010 for Critical Safety Item identification and 252.242-7005 for Contractor Business Systems, along with DLAD clause 46.292 for product verification testing at the source. To be considered, all offerors must submit complete documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, either detailing their experience producing identical or similar items or demonstrating capability if the item is new to their production line. Those with pending source approval requests at NAVSUP WSS must include a copy of their submission cover letter. Failure to provide all required information renders a proposal technically unacceptable and ineligible for award. The solicitation was posted on August 5, 2026, with a response deadline of September 21, 2026, and is managed by the Department of Defense, DLA Aviation office in Philadelphia. Proposals received within 45 days of posting may be evaluated, and the Government retains full discretion to determine whether competition is warranted. The point of contact for all submissions and inquiries is Brett N. Duffey, with email and phone details provided for direct communication.

Industrial Valve Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

58--TRANSMITTER, RADAR,

Solicitation # SPRPA126RXA69

The contract involves the procurement of a single unit of a radar transmitter, identified by NSN 7R-5841-015873027-P8, under solicitation number SPRPA126RXA69, with delivery specified FOB origin. Issued by the Department of Defense through Pa DLA Aviation at Philadelphia, this acquisition is conducted under Emergency Acquisition Flexibilities, emphasizing the urgency and critical nature of the item. The contract strictly requires newly manufactured spare parts only, explicitly prohibiting refurbished, remanufactured, or repaired materials. This is a critical application item, necessitating that the source of the parts be approved by the design control activity to ensure quality, given the specialized engineering skills and manufacturing knowledge required. The approved source holds essential data rights and proprietary technical information, which are not economically transferable to the Government, maintaining the integrity and performance standards of the part. Any alternative suppliers must undergo a rigorous qualification process aligned with the design control activity’s procedures and must be approved by the cognizant Government engineering authority responsible for the part’s specific application. The response deadline for offers is March 30, 2026. The contract is managed from Philadelphia, PA, with Mary S. Lindsay as the primary point of contact for this solicitation. The emphasis on maintaining strict source approval and quality compliance highlights the critical role of this radar transmitter within defense operations and the necessity of adherence to established acquisition protocols under emergency provisions.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

28--BLADE,TURBINE ROTOR

Solicitation # SPRPA126QYC96

The contract solicitation is for 648 newly manufactured turbine rotor blades, NSN 0R-2840-016995266-B8, under emergency acquisition authorities with a waived synopsis due to urgency. All items must be newly manufactured with no acceptance of refurbished, remanufactured, or repaired components. Only government-approved sources are eligible for award, and any distributor must submit an authorized distributor letter on the approved source’s letterhead at time of proposal submission. The part is classified as flight critical and has an unstable design, with known performance issues and anticipated configurational changes that will render the current version obsolete. Due to these technical uncertainties and critical safety implications, Government source approval is mandatory prior to contract award, and only previously approved sources have been solicited. New sources must submit comprehensive documentation per NAVSUP WSS Source Approval Brochures for spares or repair, and failure to provide complete data will render an offer ineligible. The requirement is being handled under FAR 6.302-1 as a sole-source action due to limited competition eligibility. Proposals are due by September 21, 2026, and must be submitted to the designated point of contact; failure to meet source approval requirements may still allow award based on Fleet support needs if timely approval cannot be secured.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

28--BLADE,COMPRESSOR,AI

Solicitation # SPRPA126QYC98

This solicitation is for 16 newly manufactured compressor blades designated as NSN 0R-2840-017141020-B8 under emergency acquisition authority, with delivery terms FOB origin. The procurement is strictly limited to approved government sources due to the critical safety nature of the item, which is flight critical and requires engineering source approval to ensure continued performance and quality. Refurbished, remanufactured, or repaired components are expressly prohibited, and only suppliers previously vetted and approved by the Government may submit bids. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is subject to DFARS Clause 252.209-7010 for Critical Safety Items and DLAD Clause 46.292 for product verification testing at the source. The Government retains exclusive access to proprietary technical data, manufacturing knowledge, and design control capabilities essential to the part’s integrity, which are not commercially available and cannot be replicated without the approved source’s expertise. Non-approved sources must submit comprehensive documentation per the NAVSUP Weapon Systems Support Source Approval Brochures—either for spares or repair—detailing experience with identical or similar items, and failure to provide this information will render proposals ineligible. Proposals must be received by September 21, 2026, and submission does not guarantee competition, as this procurement operates under FAR 6.302-1 as a sole-source action due to urgency and technical limitations. The contracting office is the Department of Defense’s DLA Aviation at Philadelphia, with Brett Duffey as the primary point of contact.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

DEOL ASSY ATH SHORT

Solicitation # SPRPA126QZB41

This contract pertains to the procurement of a critical shipboard assembly, specifically the DEOL ASSY ATH SHORT, designated for use in aircraft launch and recovery systems where failure could result in loss of life, aircraft, or vital shipboard functions. The item is classified as critical material, mandating strict adherence to MIL-STD-130 for marking and compliance with drawing 3975AS1400, Revision A, along with all referenced specifications. Manufacturing and inspection must follow rigorous quality assurance protocols, including 100% inspection of critical characteristics under the direct surveillance of a DCMA Quality Assurance Representative. NDT methods such as magnetic particle and penetrant inspection are required, and all testing must be conducted by NADCAP-accredited or ISO 17025-certified laboratories. The contractor is solely responsible for providing all tooling, fixtures, and test equipment, and no government-furnished items are authorized. Compliance with Buy American and Fair Trade Agreements is required, and the contractor must submit associated certifications. The solicitation was issued under Emergency Acquisition Flexibilities and is subject to additional federal requirements including mandatory use of Workflow Pro, veteran and disability equal opportunity provisions, and security exclusions. Packaging must conform to MIL-STD-2073, and all deliverables are to be submitted by August 17, 2026, with performance located in Philadelphia, PA. The NAICS code is 336413 with a size standard of 1,250 employees.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

VIDEO CARD,AIRCRAFT

Solicitation # SPRPA126QZB39

This solicitation seeks a video card for aircraft applications under Emergency Acquisition Flexibilities, with a NAICS code of 334412 and a size standard of 750 employees, designated as a critical application item. The contract requires strict adherence to federal compliance provisions including Buy American Act certifications, equal opportunity policies for veterans and workers with disabilities, security prohibitions, and mandatory use of Workflow Pro’s Assist Module. Payment instructions follow the Wide Area Workflow system using an invoice and receiving report combo, and item identification and valuation procedures outlined in the January 2023 guidance apply. No drawings are available, and the item must be delivered to the specified performance location, though details are unlisted. Compliance with EPA-reported recoverable material content requirements and royalty information obligations are also mandated. The solicitation, issued by the Department of Defense through the DLA Aviation office in Philadelphia, is open for responses through August 17, 2026, with Jonathan M. Rivera as the primary point of contact.

Bare Printed Circuit Board Manufacturing

POSTED

about 22 hours ago

DEADLINE

28--BLADE,TURBINE ROTOR

Solicitation # SPRPA126QYC97

The contract solicitation pertains to the procurement of 586 newly manufactured turbine rotor blades, identified by NSN 0R-2840-017141155-B8 and reference number 5144T23P02, to be delivered FOB origin. This is a single-source acquisition under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition, with only previously government-approved sources being solicited. Refurbished, remanufactured, or repaired parts are strictly prohibited, and all offers must be for brand-new components. Offerors not currently approved sources must submit complete documentation per NAVSUP WSS Source Approval Brochures to demonstrate manufacturing capability, including technical data on similar items or proof of prior approval under review. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at time of proposal submission. The acquisition is being conducted under emergency flexibility authority, waiving the standard synopsis requirement due to urgency. Government inspection and acceptance will occur at the manufacturer’s facility under DLAD clause 46.292, and the contract incorporates DFARS clauses 252.209-7010 for Critical Safety Item identification and potentially 252.242-7005 regarding contractor business systems. The point of contact for all submissions is Brett N. Duffey of the Defense Logistics Agency Aviation in Philadelphia, with proposals due by September 21, 2026. Any proposals lacking the required source approval documentation or failing to confirm prior submission of such data will be deemed technically unacceptable and ineligible for award. While the solicitation allows any responsible source to respond within 45 days, the government reserves full discretion to proceed without competition based on fleet support needs and timelines, and responses will be evaluated solely to determine if competitive procurement is feasible. No award will be delayed if source approval cannot be finalized in time to meet operational demands.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC31

The contract involves the procurement of 30 units of NSN 6K-8145-012622982-YX, with delivery terms specified as FOB origin, meaning the buyer assumes responsibility for the item once it leaves the supplier’s location. Engineering source approval is mandatory to ensure part quality, as only qualified sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge essential to maintaining performance standards. These approved sources hold exclusive data rights and technical information that are not economically accessible to the Government, making source restriction necessary. Any alternative supplier must undergo formal qualification through procedures approved by the cognizant Government engineering activity responsible for the part’s intended application, ensuring compliance with designated quality and technical requirements. This is a presolicitation notice issued under solicitation number SPRPA126RVC31, with a response deadline of September 2, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, Pennsylvania, with the primary point of contact being Makayla Hauser of APAC.41. The part’s technical specifications and sourcing restrictions indicate a reliance on niche suppliers with established expertise, and the Government retains strict oversight over qualification processes to safeguard mission-critical performance and supply chain integrity.

Other Metal Container Manufacturing

POSTED

DEADLINE

81--CONTAINER,SHIPPING

Solicitation # SPRPA126RVC30

The contract pertains to the acquisition of three units of a shipping container identified by NSN 6K-8145-015897584-B8, with delivery terms set at FOB origin. Engineering source approval is mandatory to ensure part quality, as only approved sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge necessary for proper production or maintenance. The technical data and manufacturing expertise retained by these approved sources are not economically accessible to the Government and are critical to sustaining the part’s performance and integrity. Any alternate supplier seeking to qualify must successfully navigate a stringent approval process governed by the design control activity and sanctioned by the cognizant Government engineering authority with jurisdiction over the component’s intended use. The procurement is issued under a total small business set-aside, indicating exclusive eligibility for small businesses, and is managed by the Department of Defense through the Defense Logistics Agency Aviation in Philadelphia. The solicitation was posted on July 18, 2026, with proposals due by September 2, 2026, and primary contact for inquiries is Makayla Hauser at the provided email and phone number.

Other Metal Container Manufacturing

POSTED

DEADLINE