Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

59--ASSY,PLATE AND CAPA, IN REPAIR/MODIFICATION OF

Active
N0010426QYAEDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the repair of a specific assembly, Plate and Capa, with NIIN 016779934 and part number NV823192-3, used in the Sub Atmosphere Control system, under NSN 7H-5910-016779934. The Government intends to award this contract on a sole source basis to Hamilton Sunstrand Corp. (CAGE: 73030), the Original Equipment Manufacturer and the only known source capable of providing repair support for this part due to proprietary data and lack of government ownership of design or technical data. This procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, and no other suppliers can satisfy the requirement. While all responsible sources may submit capability statements, no competitive procurement is anticipated, and the award is expected to be made to the designated OEM. The contract duration is one year, with delivery to DLA Distribution Norfolk, VA, and UID marking and Buy American provisions will apply. The procurement follows FAR Part 15 procedures, excluding commercial item acquisition policies. Solicitation will be issued electronically via NECO on or about 7 August 2026, with proposals due by 7 September 2026 and an anticipated award date of 22 September 2026. All submissions must be sent via email to Taylor Weidman, and no hard copies or telephone requests will be accepted. The NAICS code is 334419, and the PSC is 5910. Although the initial notice indicated a Total Small Business Set-Aside, the solicitation will not be restricted to small businesses, and the referenced set-aside classification appears to be in error.

General Info

Sole source repair contract for Plate and Capa assembly awarded to Hamilton Sunstrand Corp under federal procurement rules.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts
TAYLOR WEIDMAN

Full Description

Show more
NSN 7H-5910-016779934, TDP VER 001, QTY 1 AY, DELIVER TO SW3117, DLA DISTRIBUTION NORFOLK VA, NORFOLK, VA 23511-0001, INDUCTION NIIN IS 7H, 5910, 016779934, ASSY,PLATE AND CAPA, NV823192-3. NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg intends to solicit on a sole source basis with HAMILTON SUNSTRAND CORP. (CAGE: 73030) for the REPAIR of Items Below: NOMENCLATURE NIIN PART NUMBER WEAPON SYS ASSY,PLATE AND CAPA 016779934 NV823192-3 SUB ATMOSPHERE CONTROL There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing REPAIR support of the above REPAIR part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 334419 PSC: 5910 Contract Duration will be 1 year. UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 7 AUGUST 2026 with an approximate response/closing date of 7 SEPTEMBER 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 22 SEPTEMBER 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Taylor Weidman taylor.m.weidman2.civ@us.navy.mil.

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
Federal
EIC/ESR Quad Test Stand Power Supply
Solicitation # Stek-26-I07222026
The Thomas Jefferson National Accelerator Facility, operating under SURATech, LLC for the U.S. Department of Energy, is seeking qualified vendors to fabricate one DC Power Magnet Supply for use on the Electron Ion Collider project at Brookhaven National Laboratory in Upton, New York. This request for information is intended to gather budgetary estimates and lead time projections to support planning efforts ahead of an official Request for Proposal expected to be issued in 2026. The supply is designated as the EIC/ESR Quad Test Stand Power Supply and will be installed at Brookhaven, with Jefferson Lab managing the procurement process from its location in Newport News, Virginia. Vendors are encouraged to respond by the deadline of August 7, 2026, to provide the necessary technical and cost data to inform the upcoming procurement. The procurement will be conducted under a Low Price/Technically Acceptable selection method, emphasizing cost efficiency as long as minimum technical qualifications are met. The NAICS code 334419 applies to other electronic component manufacturing, indicating the specialized nature of the required equipment. The point of contact for inquiries is David Carbullido, reachable via email at carbulli@jlab.org. All responses must be submitted through the SAM.gov portal, and no set-aside provisions are currently specified, meaning the opportunity is open to all eligible contractors. This RFI serves as a preliminary step to assess market capability and inform formal solicitation timelines, with no contractual obligation incurred by participation.
Jefferson Labor - DOE Contractor

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
Federal
59--FISH DETECTOR TAGS (PIT TAGS)
Solicitation # 140G0326Q0182
The U.S. Geological Survey intends to award a sole-source firm-fixed-price purchase order to Biomark, Inc. for approximately 37,000 preloaded 12mm Passive Integrated Transponder (PIT) tags to support fish population monitoring in the Colorado River and Little Colorado River. The delivery schedule mandates a base delivery date of August 31, 2026, with optional deliveries scheduled for September 10 and September 20, 2026, driven by manufacturer lead times and operational needs. The tags must comply with ISO 11784/11785 FDX-B standards, operate at 134.2 kHz, and be fully compatible with existing Biomark scanning systems and autonomous antenna setups. All tags must be preloaded into injectable needles and proven to deliver reliable read range and detectability in riverine environments. Vendor responses must include a capability statement limited to three pages, product documentation detailing manufacturer specifications, lot traceability, warranty terms, handling and storage instructions, test data, field-use history, customer references, manufacturing lead time confirmation, and evidence of active SAM.gov registration with a valid CAGE code and Unique Entity ID. The solicitation number is 140G0326Q0182, posted on August 7, 2026, with responses due by August 10, 2026, and must be submitted electronically to Joel Berberena at the U.S. Department of the Interior’s Office of Acquisition Grants in Sacramento, California. No formal contract clauses, evaluation factors, pricing details, or inspection protocols are included, as this is a sources sought notice under FAR Part 10 for market research, not a binding solicitation or award. The NAICS code is 334419 with a small business size standard of 750 employees, and no set-aside status is designated. The government retains final authority for inspection and acceptance, with delivery expected to the contracting office in Sacramento, though deployment will occur at riverine monitoring sites.
Office Of Acquisiton Grants

POSTED

about 9 hours ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

New
Federal
44--BUNDLE ASSY
Solicitation # N0010426RTB95
The contract involves the procurement of 21 units of a bundle assembly identified by NSN 3H-4420-016673937-PP, with technical data package version 005 and reference number D-17503-11PC2, delivered FOB origin. The government does not own or have rights to the technical data necessary to source this part from alternative suppliers, and obtaining such rights or reverse engineering the component is deemed uneconomical. Limited competition is anticipated under FAR Overhaul 6.103-1, with solicitation and negotiation restricted to a narrow pool of qualified sources capable of meeting the specified requirements. While other potential suppliers may submit capability statements to demonstrate their ability to fulfill the requirement, these submissions will not delay award proceedings or automatically qualify them for consideration. The part is not covered under commercial acquisition policies in FAR Overhaul Part 12, indicating it is treated as a unique or non-commercial item. Technical documentation such as military specifications, qualified product lists, and handbooks can be accessed via ASSIST-Quick Search or ordered through DODSSP, though proprietary materials like drawings, patterns, and deviation lists are not available through these channels. All inquiries and document requests should be directed to the DODSSP ASSIST Service Desk. The solicitation was posted on August 7, 2026, with responses due by September 21, 2026, and is managed by the Naval Supply Systems Command Weapon Systems Support Mechanical in Mechanicsburg, Pennsylvania, with Tyler Curfman listed as the primary point of contact.

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEB
The contract pertains to the sole-source repair of a circuit card assembly identified by NSN 7H-5998-015421688-VN and part number S9515-AL-MMA-010, used in the Sub Atmosphere Control system under weapon system NV823323-1. This repair work is authorized solely for Hamilton Sunstrand Corp. (CAGE 73030), the original equipment manufacturer and the only source capable of providing the repair due to proprietary data and design rights held exclusively by the manufacturer, with no government ownership of the associated technical data. The procurement is conducted under FAR 6.302 and 10 U.S.C. 2304(c)(1), allowing noncompetitive negotiation based on the absence of alternative sources, and requires all non-approved vendors to submit a Source Approval Request prior to consideration, though the timeline will not be extended for such requests. The National Industrial Security Program and Buy American provisions apply, and UID marking is mandatory for delivered items. The contract is set for a one-year duration with an anticipated award date of 8 October 2026 following a solicitation posting on NECO on 21 August 2026, with responses due by 22 September 2026. Electronic submission is required, with no hard copy or telephone inquiries accepted. Despite appearing as a Small Business Set-Aside in metadata, the procurement is explicitly non-competitive and not designated for total small business set-aside in actual execution. Interested parties may submit capability statements by email to the point of contact, Taylor Weidman, within 45 days of the notice publication for consideration, though no competitive selection is anticipated.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 325920
New
Federal
1356-01-533-5206; TH04; IGNITER, TORPEDO, ASSEMBLY
Solicitation # N0010426RK077
The solicitation N0010426RK077 seeks a firm fixed-price contract for the procurement of the IGNITER, TORPEDO, ASSEMBLY, identified by NSN 4T-1356-01-533-5206 and DODIC TH04, under NAICS code 325920 for explosives manufacturing. This is a competitive, unrestricted acquisition with no set-aside, requiring full compliance with stringent safety, quality, and cybersecurity standards due to the item’s classification as a Critical Safety Item and explosive material with a hazard classification of 1.4 and UN number 0325. The contractor must adhere to all applicable military standards including MIL-STD-129, MIL-STD-130, MIL-STD-1168, and 49 CFR for packaging, marking, transportation, and hazardous materials handling. A Safety Survey is mandatory, and compliance with DoD Manual 4145.26 is required, along with government access to facilities and safety documentation. The contract includes specific first article testing for 33 units, production lot testing for 80 units, and delivery of 20 production units per line item, with additional quantities under an option for 300 more units. Delivery timelines vary by line item, ranging from 60 days after award to 202 days after first article approval, with multiple destinations including key U.S. naval facilities and an Australian government cargo office. The item requires UID compliance, serial number registration, and full adherence to drawings and specifications verified by DCMA. Proposals must be submitted electronically in Word, Excel, or PDF format, with each volume—Introductory, Past Performance, Small Business Participation, and Price—filed separately and not exceeding 10MB per attachment. Proposals must address all evaluation factors, with past performance being significantly more important than small business participation, and both collectively deemed significantly more important than price. Offerors must achieve at least a “limited confidence” rating in past performance to be eligible for award, and the contract will be awarded based on best value using a trade-off analysis. Compliance with CMMC cybersecurity requirements is mandatory, and contractors must maintain current CMMC status and affirm continuous compliance in SPRS. All offerors must be active in SAM, submit accurate small business size status representations, and include required certifications and representations per FAR clauses, including deviations such as a 10 percent
Explosives Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332510
New
Federal
53--BRACKET,MOUNTING, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEA
The U.S. Navy, through NAVSUP Weapon Systems Support Mechanicsburg, intends to award a sole-source repair contract for a mounting bracket identified by NSN 7H-5340-015421659-VN and part number NV823320-2, used in the sub-atmosphere control system of a weapon system. Hamilton Sundstrand Corp., the original equipment manufacturer and the only known source capable of repairing this item, has been identified as the sole responsible source due to proprietary data restrictions and lack of available technical documentation. The Government does not hold the necessary intellectual property rights to enable competition or sourcing from alternative vendors, and the procurement will be conducted under authority of 10 U.S.C. 2304(c)(1) and FAR 6.302. The repair service is required in a one-year contract with UID marking and Buy American Act compliance required, though no drawings or technical data are provided to support alternative repairs. The solicitation will be issued electronically via NECO on or around 21 August 2026 with proposals due by 18 September 2026, and an anticipated award date of 5 October 2026. The procurement is not a total small business set-aside, but the NAICS code 332510 applies to aerospace product and parts manufacturing. Interested parties may submit capability statements by email to Taylor Weidman at the designated Navy address within 15 days of the notice publication, though any such submissions will only be considered to evaluate whether a competitive procurement is warranted. No hard copies will be mailed, no telephone inquiries accepted, and no extension will be granted for SAR approvals or alternative source development. All proposals received within 45 days of the synopsis date will be reviewed as part of the Government's determination process, with the expectation that award will proceed with Hamilton Sundstrand Corp. unless compelling evidence of another capable source emerges.
Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
59--TRANSFORMER,POWER, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEC
The contract involves the sole-source repair of a power transformer, designated NSN 7H-5950-015991682 and part number NV822158-3, for use in an atmosphere control system aboard naval assets. The repair work is exclusively authorized for Hamilton Sundstrand Corp., the original equipment manufacturer, as it is the only source with the proprietary knowledge and data necessary to perform the repair—no drawings or technical data are available to the Government, and no alternative sources can meet the requirement. The procurement is justified under 10 U.S.C. 2304(c)(1) and FAR 6.302, with full source approval already granted to the manufacturer. The work will be performed under a one-year contract, with delivery to DLA Distribution Norfolk, Virginia, and UID labeling and Buy American Act requirements will apply. The acquisition is being conducted using FAR Part 15 procedures, not commercial item policies, and no small business set-aside is in effect despite the listing. Interested parties may submit capability statements within 45 days of the notice, but the Government anticipates awarding directly to Hamilton Sundstrand Corp. without competition. The solicitation will be issued electronically via NECO on August 7, 2026, with responses due by September 8, 2026, and an anticipated award date of September 22, 2026. All inquiries must be submitted via email to the designated point of contact; no phone calls or hard copies will be accepted.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAE9
The Government intends to procure the repair of one circuit card assembly, NSN 7H-5998-015421656-VN, part number S9515-AL-MMA-010, under a sole source arrangement with Hamilton Sundstrand Corp. (CAGE 73030), the original equipment manufacturer and the only source capable of providing repair support due to the absence of technical data, drawings, or intellectual property rights available to the Government. The item, identified under NIIN 7H-5998-015421656 and associated with weapon system sub-atmosphere control, is critical for operational readiness and cannot be substituted by any other supply or service. The procurement is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, and all responsible parties may submit capability statements, though award is expected to be made solely to the approved OEM. A Source Approval Request must be submitted by any non-approved firm, but the acquisition will proceed without delay for such requests. The contract is valued for 11 units, with delivery directed to DLA Distribution Norfolk, VA, and is subject to UID marking and Buy American requirements. The procurement will follow FAR Part 15 procedures and is not classified as a commercial item acquisition, despite a 15-day window for interested parties to propose commercial alternatives. The solicitation, anticipated for release on 21 August 2026 through NECO, will close for responses on 18 September 2026 with an award anticipated by 5 October 2026. While the notice indicates a Small Business Set Aside, the initial description conflicts with a sole source intent, and the official document lists the set-aside type as Total SBA. Responses and capability statements must be submitted electronically to Taylor Weidman at the provided Navy email address; no hard copies or phone inquiries will be accepted.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
ADAPTER ASSEMBLY CM
Solicitation # N0010426QBC08
The contract pertains to the procurement of an ADAPTER ASSEMBLY CM under solicitation N0010426QBC06, with a closing date extended to June 18, 2026, and pricing valid for 60 days after submission unless otherwise specified. All technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which dictates the order of precedence for conflicting documents, with contract amendments and schedules taking priority over drawings, specifications, and standards. Contractors must comply strictly with the revision levels cited in the IRPOD and may not mix revisions without written approval from the contracting officer. The IRPOD is mandatory and accessible via the BPMI e-Commerce portal, requiring pre-registration and password authentication; vendor review of the IRPOD is compulsory. Technical documentation is marked NOFORN and subject to export controls, with distribution restricted to U.S. entities unless prior approval is obtained from Naval Sea Systems Command. Packaging must adhere to MIL-PRF-23199 and MIL-STD-2073 where applicable, with green poly bags permitted only when cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar standards are invoked, and fire-retardant materials are no longer required. Mercury or mercury-containing compounds are prohibited from direct contact with supplied hardware. Quality assurance responsibilities are defined entirely within the IRPOD, requiring contractors to maintain complete inspection records available to the government throughout performance and beyond. Pre-manufacturing submissions, including procedures and drawings, must be submitted within 45 days after contract award and certified according to DI-QCIC-8871, while post-production test and inspection reports must be submitted at contract end per DI-QCIC-8872, both in separate packages keyed to each unique contract line item. All contractual documents are deemed issued upon electronic transmission or mail delivery, and submissions must follow WAWF or alternative electronic means. Pricing must be clearly stated with validity period, and deviations or delays require formal justification including technical evaluation of impact on form, fit, function, and quality, reviewed by the Government Quality Assurance Representative before forwarding to the post-award contracting officer. Compliance with cybersecurity maturity certification, small business set-aside, priority rating for national defense, and security prohibitions under recent deviations is mandatory.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QZB70
This contract pertains to the procurement of a Compartment Salvage Ball Valve for critical shipboard use, designated as SPECIAL EMPHASIS Level I material due to its direct impact on vessel safety, where failure could result in catastrophic loss of life or ship. The valve and its components must strictly conform to specific Navy drawings including 4558705, 4558706, and others, with precise material requirements for parts such as the body, tube, ball, stems, studs, nuts, and seats, each governed by military and industry standards like QQ-N-281, MIL-T-16420, ASTM-B150, SAE AMS 6931, and MD71-GG Mearthane. All materials require traceable certification, with chemical and mechanical tests verified through Objective Quality Evidence, and mandatory certifications including Liquid Penetrant, Ultrasonic, and Dye Penetrant Inspections as specified. Material traceability is enforced from raw stock to finished component via permanent, legible markings meeting MIL-STD-792, with strict controls to prevent commingling and ensure documentation integrity. Non-metallic components such as elastomeric seats must meet exact hardness, tensile, and absorption properties per ASTM standards and be sourced exclusively from approved suppliers. All manufacturing and assembly processes must adhere to detailed specifications including welding and brazing requirements under S9074-AQ-GIB-010/248 and 0900-LP-001-7000, with procedure and welder qualification data subject to prior government approval. Thread forming is restricted to cutting, and lubricants containing molybdenum disulfide are prohibited due to seawater degradation risks; instead, Anti-galling compound A-A-59004 is mandated. The Contractor must maintain an ISO-9001-compliant quality system with calibration procedures aligning to ISO-10012 or ANSI-Z540.3, and is subject to Government Quality Assurance at source. Final acceptance requires 100% inspection of certification documents, traceability markings, and non-destructive test results, with zero defect tolerance for lot acceptance. All fasteners must be uniquely marked with material symbol, manufacturer ID, and traceability number, while Teflon coatings and seat dimensions must comply with specific drawing notes and CSD references. The contract mandates full compliance with Buy American provisions, Small Business set-asides
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QDB44
This contract pertains to the repair and modification of a circuit card assembly under a firm-fixed-price arrangement, requiring strict adherence to technical specifications and quality standards mandated by the U.S. Navy. The solicitation mandates a Repair Turnaround Time of 53 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with final government inspection and acceptance essential before completion. All repairs must comply with MIL-STD-130 Rev N for marking and follow the original manufacturer’s technical directives, drawings, and approved repair procedures. The contractor is responsible for all inspections and testing, maintaining complete records for at least 365 days post-delivery, and must not substitute components without prior written approval from the contracting officer, with specific code classifications governing any design or part number changes. The contract enforces mandatory compliance with Federal Acquisition Regulation clauses including Buy American, cybersecurity maturity certification, small business subcontracting, and security prohibitions, while also requiring the use of Workflow Pro for payment and invoice processing. Freight is FOB Origin and handled by the Navy under CAV guidelines, with all quotes required to specify unit price, total price, and RTAT, or explain capacity limitations if unable to meet the 53-day requirement. The solicitation applies only to authorized distributors of the original manufacturer, and proof of authorization must be submitted with the offer. All documents and data are subject to distribution restrictions as defined by OPNAVINST 5510.1, and any requests for controlled documents must follow formal government channels. The award will be bilateral, contingent upon the contractor’s written acceptance, and pre-populated subcontract clauses define maximum RTAT, throughput capacity, and induction expiration dates not exceeding 365 days.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
Federal
LOWER BEARING ASSY
Solicitation # N0010426QYA7K
This contract is for the manufacture and delivery of the Lower Bearing Assembly #1, a specialized component for use on U.S. Navy submarines, under a 100% small business set-aside solicitation identified as N0010426QYA7K. The requirement demands strict adherence to specific engineering drawings and a comprehensive set of technical standards including MIL-STD-973, MIL-STD-130N, MIL-STD-2035A, ISO 9001, ISO/IEC 17025, and multiple NAVSEA technical publications. The contractor must implement a robust quality inspection system, submit and obtain prior government approval for detailed test plans, welding procedures, nondestructive testing protocols, and first article inspection reports. All production units require 100% dimensional and nondestructive inspection, including visual and liquid penetrant testing of welds, thread inspections to ASME B1.3 systems, and certification of material composition through mill reports. Each component is subject to permanent marking per MIL-STD-130 with traceability by heat, lot, batch, and serial number. The contract requires full documentation of objective quality evidence for all materials and processes, including certified mill data, weld rod certifications, heat treatment records, material compliance certificates, and welder and inspector qualification records. Mercury contamination is strictly prohibited, and any use of mercury or mercury-bearing materials requires explicit written approval from the Procurement Contracting Officer with detailed protective measures and warning labeling. All deliveries must be accompanied by a Mercury Exclusion Certification. The contract uses FOB destination terms, requires electronic submission of invoices and receiving reports through WAWF/IRAPT, and sets a 1-year warranty after delivery with a 45-day defect discovery window. The Naval Surface Warfare Center, Philadelphia Division (NSWCPD), serves as the accepting activity with DODACC N64498 and is responsible for reviewing and approving all contractual data items, technical submissions, and final inspections. The government reserves the right to inspect at any point during manufacturing, and contract compliance is mandatory throughout the supply chain, including subcontractors. The solicitation closes on July 30, 2026, with evaluation based on balanced consideration of price and non-price factors such as delivery lead time and verified past performance.
Ball and Roller Bearing Manufacturing

POSTED

1 day ago

DEADLINE

in 24 days
View Details
NAICS: 335931
New
Federal
ADAPTER
Solicitation # N0010426QEC52
The contract pertains to the procurement of an ADAPTER under solicitation N0010426QEC52, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, with a NAICS code of 335931. The solicitation mandates strict compliance with technical and quality requirements outlined in the Individual Repair Part Ordering Data (IRPOD), which contractors must review prior to submission, as access is mandatory and requires pre-registration via the BPMI e-Commerce website. Delivery and performance are subject to stringent document control, where the IRPOD, drawings, technical data, and referenced military specifications form the basis of contractual obligations, with a defined order of precedence that prioritizes contract amendments, schedules, and terms in descending order. All technical documentation is marked with distribution restrictions, including NOFORN designations, requiring explicit government approval for any transmission to foreign nationals. Contractors must adhere to specified revision levels of referenced documents and may not mix revisions without written approval, and any deviations or waivers, particularly for critical repair parts, require detailed justification including technical data, impact assessments, and coordination with the Government Quality Assurance Representative. Pricing is valid for 60 days after the closing date, with clear instructions to specify alternative validity periods if applicable. Packaging must conform to MIL-PRF-23199 and other invoked standards, especially where cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar documents apply, allowing only heat-sealed envelopes for components under such controls; the use of fire-retardant packaging is expressly prohibited. The contract includes mandatory compliance with cybersecurity maturity certification, small business set-aside requirements, priority ratings for national defense, and prohibitions against the intentional use of mercury. All contractual documents are deemed issued upon electronic transmission, and acceptance of the proposal constitutes bilateral agreement. Technical data delivery is governed by DD Form 1423 requirements, with specific codes dictating inspection and acceptance authority, submission frequency, deadlines, and data classification, including mandatory submission of a Certificate of Compliance per DI-MISC-81356 with each delivery. Data pricing categories are defined, with most items expected under Group I or II, requiring cost calculations based on direct labor, overhead, G&A, and profit, and no charge may be indicated only where data is commercial in nature and trivial in cost. All submissions must be made through the designated electronic portal, and failure to meet procedural and technical requirements will result in rejection without review
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details