Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

59--CABLE ASSY

Active
N0010426QYAHUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NAVSUP Weapon Systems Support Mechanicsburg is soliciting the procurement of 13 cable assemblies for sub antenna systems under NSN 1H-5995-016608480-SQ. The requirement is designated as an emergency acquisition with a one-year contract duration. Delivery is specified for two locations: DLA Distribution New Cumberland in Pennsylvania and DLA Distribution San Joaquin in California. The procurement follows FAR Part 15 procedures and includes Buy American clauses and Unique Identification requirements. Although the government intends to solicit full and open competition, the Original Equipment Manufacturer is currently identified as the only known source capable of providing these spares because the government does not own the necessary technical data. The solicitation is a small business set-aside with an anticipated RFP issue date of September 16, 2026, and an expected award date of November 2, 2026. Interested parties must submit capability statements or proposals via electronic procedures.

General Info

Emergency procurement of 13 cable assemblies for sub antenna systems via small business set-aside.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

N/A

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 1H-5995-016608480-SQ, TDP VER 007, QTY 13 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, DELIVER TO W62G2T, W1A8 DLA DIST SAN JOAQUIN, TRACY, CA 95304-5000. NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg intends to solicit full and open competition for the Spares of Items Below: NOMENCLATURE NIIN PART NUMBER WEAPON SYSTEM CABLE ASSY 016608480 8590842-1 SUB ANTENNA SYSTEMS There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing spares support of the above spares part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 335931 PSC: 5995 Contract Duration will be 1 year. UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This notice of intent is a request for competitive proposals. All proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally beconsidered solely for thepurpose of determining whether to conduct a competitive procurement. This NIIN is an emergency acquisition NIIN. This order will be issued pursuant to Emergency Acquisition Authority. Options will be included in the solicitation. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 16 SEP 2026 with an approximate response/closing date of 16 OCT 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 02 NOV 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Jessica Grzywna, jessica.t.grzywna.civ@us.navy.mil.

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332510
New
Federal
DUST PLUG
Solicitation # N0010426QAC01
Solicitation N00104-26-Q-AC01, issued by NAVSUP Weapon Systems Support Mechanization, seeks the manufacture and supply of Dust Plugs under CLIN 0001 (NIIN LWM021720). The requirements specify that the items must adhere to the material and physical specifications of NAVSEA P/N 3044652, which includes modifications to Danfoss/Hansen line P/N SDC3HK. The technical data package has been updated to version 003, and drawing 2330005 has been added to the bid set. Notably, the obsolete 17-1 crimping tool has been replaced by the approved P/N 31-B. Delivery is required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the contractor's plant. The contract is a total small business set-aside and will be awarded to the responsible offeror providing the lowest priced, technically acceptable proposal. Quality assurance is the primary responsibility of the contractor, though the government reserves the right to perform source inspections per FAR 52.246-2. Packaging must comply with MIL-STD 2073 and MIL-STD 129, with specific packing levels designated for domestic and overseas shipments. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and adherence to MIL-STD-973 for configuration management. The procurement is a DO rated order for national defense and emergency preparedness.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 23 days
View Details
NAICS: 332919
New
Federal
STEM
Solicitation # N0010426QFE55
Solicitation N00104-26-Q-FE55 is a firm-fixed-price request for the procurement of a stem used in a critical shipboard system. Due to the high risk associated with material failure, the item is designated as Special Emphasis material (Level I, Quality Assured), requiring strict adherence to quality control procedures, full traceability, and a zero-defect acceptance policy. The procurement is a 100 percent small business set-aside, with an offer receipt deadline of September 8, 2026. Award is based on a trade-off process where past performance, evaluated via the Supplier Performance Risk System, is considered more important than price. Technical requirements mandate that the stem be manufactured according to Naval Sea Systems Command Drawing 4558766 and material specification QQ-N-286. The contractor must maintain a quality system compliant with ISO 9001 and provide comprehensive objective quality evidence, including ultrasonic inspections and slow strain rate tensile tests performed by approved laboratories. All certification data must be submitted and accepted via Wide Area Workflow (WAWF) by the Portsmouth Naval Shipyard prior to shipment. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073, and the contractor is prohibited from intentionally adding mercury to the hardware. The contract is rated DO under the Defense Priorities and Allocations System for national defense use.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332119
New
Federal
RING,EXTERNALLY THR
Solicitation # N0010426QNC94
Solicitation N00104-26-Q-NC94 is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of Ring, Externally Thr (NSN 5365-01-324-5687). The material is designated as Special Emphasis material and a Critical Safety Item, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury or loss of the vessel. Due to this criticality, the contract mandates strict quality assurance, including a quality system compliant with ISO-9001 and specific calibration standards. The technical requirements are governed by TDP Version 007, and the item must be manufactured from UNS Alloy C90300 in accordance with ASTM-B505. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Evaluation will utilize the Supplier Performance Risk System to assess item, price, and supplier risk. Key contractual requirements include DX certification for national defense, FOB Destination shipping to Portsmouth Naval Shipyard, and a delivery window extended from 30 to 120 days. The contractor must provide comprehensive certification data, including non-destructive testing and material verification, submitted via the Wide Area Workflow system. All items must be preserved and marked according to MIL-STD-2073-1 and MIL-STD-129, with a requirement for unique item identification. The solicitation closing date has been extended to October 16, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332216
New
Federal
TOOL HOLDER
Solicitation # N0010425QAA97
This contract is for the manufacture of a TOOL HOLDER under solicitation number N0010425QAA97, with a response deadline of August 1, 2026. The requirement is tied to detailed engineering drawings, primarily Drawing 2314354P1 Revision 3, and must comply with multiple military standards including MIL-D-70327, OD 152922, MIL-STD-130 for marking, MIL-STD-202 for salt spray testing, and MIL-STD-973 for configuration control. The unit must incorporate a spring-loaded trigger mechanism that activates with a force between 25 and 45 pounds on the handle, delivering a hammer blow to a threaded tip, and must be compatible with specified contact tips without affecting compliance to OS 12614. Dimensions and critical features such as knurling, thread size, and chamfer angles are strictly defined. All items must be marked with the part number, revision, and manufacturer’s symbol per MIL-STD-130. The contract mandates government source inspection per FAR 52.246-2 and requires delivery within 90 days of award. Packaging must adhere to MIL-STD-2073, and records of all inspections must be maintained for 365 days after final delivery. The procurement is subject to a total small business set-aside and requires adherence to annual representations and certifications under FAR 52.212-3 with updated data as of January 2025. The contracting activity is NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania, with primary point of contact Amanda R. Hayward. Payment will be processed through Navy Wide Area WorkFlow using a combined invoice and receiving report system, with delivery FOB destination. The contract explicitly prohibits substitute items unless pre-approved through formal testing and documentation via the OD 36190 source list. Access to drawings is available via SAM.gov using the solicitation number. All contractual documents are considered issued upon electronic transmission, and deviation or waiver requests must be formally submitted to the Contracting Officer at NAVICP-MECH. The requirement carries a priority rating for national defense purposes, and any requests for NOFORN or controlled documents must be channeled through designated military points of contact.
Saw Blade and Handtool Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 29 days
View Details