Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONNECTOR BRUSH

Active
SPE4A5-26-T-322RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 27 units of NSN 5977012318738 CONNECTOR BRUSH, with delivery required to the DLA Distribution Depot Hill within 262 days after contract award. The procurement is conducted via a requested quotation (RFQ) under solicitation number SPE4A526T322R, with no hard copies available—only the electronic version accessible through the provided online link. The approved source for this item is supplier 73030 572866, and only electronic submissions will be accepted. All responsible suppliers may submit a quote provided it is received by the deadline of August 12, 2026. No technical specifications, plans, or drawings are provided, and the solicitation is open to all qualified sources without set-aside restrictions. The North American Industry Classification System code is 335999, and inquiries must be directed by email to the designated point of contact, with further details available through the SAM.gov portal using the solicitation number. The contracting office is located in Richmond, Virginia, under the agency name Department of Defense.

General Info

27 connector brushes ordered by DOD, delivery to DLA Hill within 262 days, electronic quotes only, deadline August 12, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-322R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Anthony Nickens
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR BRUSH
CONNECTOR BRUSH
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
UTAS Sampling Plan (SP1236) C=0, dated 01 Feb 2013, is an acceptable Alternate Sampling Plan in lieu of using ANSI/ASQ Z1.4-2003 (R2013). SP1236 is a proprietary document and is not available from DLA. ADEQUATE DATA FOR THE NSN/Part Number: 5977-01-231-8738 Quantity: 27 EA Purchase Request: 7017739672QTY: 27 Delivery: 262 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
INSULATION SLEEVING SE
Solicitation # SPE4A6-26-T-11ZR
The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
HEATING ELEMENT, ELE
Solicitation # SPE8E8-26-Q-0447
The contract pertains to the procurement of 86 electrical heating elements, nonimmersion type, identified by NSN 4520-01-391-8325, under solicitation SPE8E8-26-Q-0447, with a required delivery within 90 days of award. The procurement is managed by DLA Dist San Joaquin under the Department of Defense, with performance to occur in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates DLA packaging requirements and affirms that covered defense information may apply. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The point of contact for inquiries is Jennifer Luczkowski, with email and phone provided, and responses are due by August 11, 2026.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
TAILLIGHT, VEHICULAR
Solicitation # SPE8E7-26-T-3457
The contract pertains to the supply of one vehicular taillight with NSN 6220-20-011-6730 and part number 106583, sourced from LIFTKING MANUFACTURING CORP, under solicitation SPE8E7-26-T-3457. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation, wrapping, and unit packaging codes, while marking adheres strictly to MIL-STD-129 without special identification. The shipment is to be delivered to USS WASP LHD 1 at FPO AE 09556 via the fastest traceable method, explicitly prohibiting parcel post. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements apply, and the contract incorporates provisions for government identification removal, covered defense information, and source approval documentation. The delivery deadline is July 30, 2026, and the contract is managed under the Defense Logistics Agency with primary point of contact Kelly Mitchell. Pricing is set at $1.00 per unit for a total of $1.00, and all logistics and administrative codes are designated for government use only.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-12BM
This contract specifies the supply of electrical insulation sleeving under NSN 5970-01-365-9143 and part number HS40-400-4, with a quantity of two units to be delivered within 171 days to the DLA Distribution San Joaquin facility in Tracy, California. The item is designated as a critical application product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including sampling protocols per MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with units provided on reels, spools, or coils and palletized according to DLA packaging guidelines. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the product, except for specific exempted applications such as functional batteries, fluorescent lamps, sensors, or chemical reagents as approved by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier. Transportation instructions and freight shipping details are governed by DLA Procurement Notes C19 and C20, with delivery terms FOB origin and no variance allowed in quantity. Documentation for source approval and hazardous material handling must meet specific contractual conditions, and all deliveries must be received at the designated facility by the required delivery date of March 4, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-Q-0718
This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.
NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
ELECTRODE
Solicitation # SPE4A6-26-T-11WH
The contract pertains to the procurement of three electrodes identified by NSN 5977-01-264-3739 and part number 40369LM, supplied by Brantner and Associates, Inc. under solicitation SPE4A6-26-T-11WH. The items must be delivered FOB origin within 171 days, with zero variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special markings required. Palletization aligns with DLA packaging requirements, and preservation methods must exclude mercury or mercury compounds in any form, including packaging materials. Mercury-containing components such as batteries or instruments are permitted only under specific exceptions defined by NAVSEA, and all such items must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331, with zero non-conformances permitted unless otherwise stated, and critical attributes are assigned verification levels or AQLs as prescribed. The item has no shelf life requirement. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. Documentation for source approval, engineering change proposals, and deviation requests must be formally submitted and approved. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are aligned with DLAD procedural notes. The contract specifies a unit price of $3.00 per each, with a total contract value of $9.00. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, and the original required delivery date is March 22, 2027. The primary point of contact is Victoria Burcham of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
JUNCTION BOX
Solicitation # SPE4A7-26-T-610G
This contract is for the procurement of 28 units of a junction box identified by NSN 5975-01-174-3646 and part number A-8064CHAL from Hoffman Engineering Co, a division of Federal Cartridge Corp, with CAGE code 63098. The item is classified as a commercial off-the-shelf (COTS) product and designated as a critical application item. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds in the hardware, its packaging, preservation, or marking, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents; portable mercury-containing devices must be shockproof and include a secondary containment boundary in compliance with NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Delivery is required within 58 days of contract award, with an original required delivery date of October 25, 2026, and a need ship date of October 10, 2026. The unit price is $28.00 per unit, totaling $784.00, and the contract is issued under solicitation SPE4A7-26-T-610G. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation details are governed by DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-12KH
This contract specifies the procurement of electrical insulation tape identified by NSN 5970009445015, designated as a commercial item with critical application status and a non-extendable shelf life of 18 months under TYPE I (CODE K) requirements. The tape must conform to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based plans, requiring zero non-conformances unless otherwise stated. Acceptance is at destination under FOB destination terms with no tolerance for quantity variance, and packaging and marking must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 33 for shelf-life indication. The item must be palletized per DLA packaging requirements and shipped within five days of contract award. Approved suppliers include Saint-Gobain Performance Plastics Corp, Rogers Corporation, and Hawkeye International, LLC, each with specific part numbers. Documentation for source approval and shelf-life compliance is mandatory, and the unit of issue is RO with a total quantity of 136 RO. The solicitation, issued under SPE4A6-26-T-12KH by the Department of Defense’s ASC Commodities Division, has a response deadline of August 12, 2026, with performance required at Goldsboro, NC. The contract enforces full adherence to DLA’s packaging and identification protocols, including the removal of government identification from non-accepted supplies and documentation requirements tied to source approval. Inspection and acceptance occur at the destination, and all materials must be prepared with specific preservative methods, containment types, and labeling standards. The contract underscores strict compliance with quality assurance provisions, where unspecified attributes are treated as major, and zero-tolerance acceptance criteria apply to samples unless explicitly modified by contract wording. All requirements are binding under the DLA master document revisions in effect as of the solicitation issue date.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
HOLDER, ELECTRICAL C
Solicitation # SPE4A6-26-T-12KJ
The contract is for the procurement of 497 electrical contact brush holders identified by NSN 5977-00-091-6355 under solicitation SPE4A6-26-T-12KJ, with a delivery requirement of 31 days after order. The item is classified as a commercial item and must comply with DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be verified at predefined levels: VII for critical, IV for major, and II for minor. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including through foreign national employees or subsidiaries, with DFARS 252.225-7048 governing its handling. Access to controlled technical data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandated DOD export control training, and formal approval from DLA. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO, and physical identification and marking of the item must meet specified standards. All defense information covered under RD002 is subject to protection protocols. The point of contact is Marcita Robinson of the ASC Commodities Division, with performance located in New Cumberland, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
ELECTRODE
Solicitation # SPE4A6-26-T-11TG
The contract pertains to the procurement of five electrodes identified by NSN 5977-01-039-9640 under solicitation SPE4A6-26-T-11TG, with a delivery deadline of 171 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to either the solicitation issue date or award date depending on acquisition size, and any amendments take precedence if issued. The item involves controlled technical data subject to ITAR or EAR export regulations, requiring strict compliance with DFARS 252.225-7048; disclosure to foreign persons, including foreign nationals in the U.S., is prohibited without prior authorization. Contractors must hold JCP certification, complete mandatory DOD export control training and the DLA questionnaire, and receive explicit approval from the DLA controlling authority to access the technical data. Additional requirements include CMMC Level 2 certification for third-party assessors, adherence to DLA packaging standards, configuration change management procedures, inspection and acceptance at origin, removal of government identification from non-accepted items, documentation for source approval requests, and stringent physical marking of the bare item. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and the place of performance is in Tracy, California, under the oversight of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE7M0-26-T-028E
The contract specifies the procurement of a special purpose cable identified by NSN 6145-01-619-4942, with a quantity of 10 units required under purchase request 7017715761. Delivery must be completed within five days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible through the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment later updates the referenced revision. The alternate offeror is obligated to submit a complete data package, including specifications for both the approved and alternate part, despite no specific data being currently available. The solicitation number is SPE7M0-26-T-028E, issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 335999. The contracting activity is managed by the Maritime Supply Chain ESOc Buys within the Department of Defense, and all correspondence should be directed to Abaigael Masterson at the provided contact details.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
ARRESTER, ELECTRICAL SU
Solicitation # SPE7M0-26-T-029S
The contract pertains to the procurement of one electrical surge arrester with NSN 5920-01-437-5196, requiring delivery within five days FOB destination to a U.S. military address in Yokosuka, Japan, with inspection and acceptance also occurring at the destination. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special markings required. Strict prohibitions are in place against the intentional introduction of mercury or mercury-containing compounds into the product, except for specific functional uses such as in batteries, fluorescent lamps, sensors, or weapon systems, with additional containment requirements for portable devices. The supplier must adhere to DLA’s technical and quality requirements referenced in the DLA Master List, and the contract includes cybersecurity compliance under CMMC Level 2. The delivery is tied to a government project code 6CF TP 1, with all shipments routed via designated military logistics channels, and the contract enforces a zero variance in quantity. The prime contractor is identified as Fischer Custom Communications Inc with part number FCC-350-1100-HB, and the solicitation is issued under contract number SPE7M0-26-T-029S with a required delivery date of August 3, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The U.S. Department of Defense, through DLA Aviation, is soliciting quotes for six Air Battery Chargers with NSN 4920014982543 under solicitation number SPE4A526T326V, which is a Small Business Set Aside for total award. The requirement is for delivery to W1A8 DLA DISTRIBUTION within 171 days after award, and only approved sources identified as 3RCD2 4159-MIL and 3RCD2 CA 1550 MIL are eligible. This is an electronic request for quotation with no hard copies available, and specifications, plans, or drawings are not provided. All responsible sources may submit a quote electronically, provided it is received by the deadline of August 12, 2026. The solicitation is classified under NAICS code 334419, and inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov link or DIBBS portal using the solicitation number. The contracting office is located in Richmond, Virginia.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details