Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

59--CONNECTOR,RECEPTACL

Active
N0038326QQB34Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to The Boeing Company for two units of a connector, receptacle part identified by NSN 0Q-5935-017222756-SX and part number D0090557-201, with delivery term FOB origin. This part is exclusively manufactured by the original equipment manufacturer, and the government holds no data or intellectual property rights that would allow procurement from alternative sources, making The Boeing Company the only viable supplier under 10 U.S.C. 2304(c)(1) and FAR 6.302. The acquisition is categorized under NAICS 335931 and PSC 500, with a contract duration of one year, subject to UID requirements and Buy American provisions. The procurement will follow FAR Part 15 procedures and will not utilize commercial item acquisition policies under FAR Part 12. All interested parties may submit capability statements within 45 days of the notice, but no competition is anticipated, and the government will not delay the process to consider new source approvals. The request for proposal is scheduled for release on July 24, 2026, with proposals due by August 24, 2026, and an anticipated award on September 24, 2026. The solicitation will be posted electronically via NECO, with no hard copies or phone inquiries accepted. All submissions must be directed via email to Deja Thompson-Mitchell.

General Info

U.S. Navy awards Boeing sole-source contract for exclusive connector part, FOB origin, one-year term, no competition anticipated.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NSN 0Q-5935-017222756-SX, REF NR D0090557-201, QTY 2 EA, DELIVERY FOB ORIGIN. NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis with The Boeing Company (CAGE: 0PXV4) for the SPARE of Items Below: NOMENCLATURE NIIN PART NUMBER AIRCRAFT Connector, Receptacle 017222756 D0090557-201 S-X There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing SPARE support of the above SPARE part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 335931 PSC: 500 Contract Duration will be 1 year. UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 24 July 2026 with an approximate response/closing date of 24 August 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 24 September 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Deja Thompson-Mitchell, deja.s.thompson-mitchell.civ@us.navy.mil.

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
Federal
59--CONNECTOR,ELECTRICThis contract governs the procurement of a specialized electrical connector assembly for critical shipboard use, designated as SPECIAL EMPHASIS material due to the high risk of failure that could result in loss of life, ship systems, or the vessel itself. The contractor must manufacture the assembly in strict compliance with Naval Sea Systems Command Drawing 7349938, MIL-DTL-24231, and other referenced specifications, with stringent requirements for material traceability, chemical and mechanical certification, and non-destructive testing. All components must be traceable from raw material through final assembly via unique heat-lot markings, and certifications must be 100% verified, positive, and unqualified, with no disclaimers permitted. Certain parts, including hull penetrators and receptacle bodies made from QQ-N-286 alloy, require specific heat treatments, chemical analysis, and destructive testing to validate compliance, with testing restricted to approved laboratories for slow strain rate tensile tests. The contract mandates comprehensive First Article Testing, both contractor-performed and government-performed, with the contractor required to submit one cable specimen for destructive testing and one complete assembly to Portsmouth Naval Shipyard for government evaluation. Quality assurance is rigorously enforced under ISO-9001, with full Government inspection at source and mandatory submission of documented quality procedures, welding qualifications, and test reports via the ECDS system. All welds, brazing, and material modifications require prior approval, and repairs on QQ-N-286 material are strictly prohibited. The contractor must maintain full configuration control, submit Engineering Change Proposals for any modifications, and comply with Buy American and Defense Priorities and Allocations System (DPAS) requirements, as this is a DO-rated order for national defense use. Delivery of all material must be completed within 365 days of contract award, with certification data submitted 20 days prior to each delivery, and the entire product line is subject to zero-defect acceptance criteria during final inspection.
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
IEM/MMM TACTICL EHFThis contract pertains to the procurement of specialized hull-penetrating assemblies for critical naval shipboard systems, where failure could result in catastrophic loss of life, vessel, or mission-critical capabilities. All materials, particularly those made from QQ-N-286 and SAE AMS 5666, must meet exacting chemical and mechanical specifications, with mandatory traceability from raw material through final assembly via unique heat-lot markings. Every component requires comprehensive certification including tensile, hardness, hydrostatic pressure, electrical, and ultrasonic testing, with results documented in Objective Quality Evidence (OQE) reports that must be electronically signed and traceable to individual items. The delivery schedule mandates submission of certification data at least 20 days prior to shipment, with final delivery due within 365 days of contract initiation. All materials are designated as SPECIAL EMPHASIS Level I, requiring 100% inspection of traceability, certifications, and test records, with zero-defect acceptance criteria for lot inspection. The contractor must maintain ISO-9001 or MIL-I-45208 quality systems, with documented procedures for welding, brazing, and material handling, and must submit all weld procedures and qualifications for Navy approval prior to production. Repair welding is prohibited on QQ-N-286, and thread lubricants containing molybdenum disulfide are strictly forbidden, with A-A-59004 anti-galling compound required instead. All certification documentation must be submitted via the Wide Area Work Flow (WAWF) system to Portsmouth Naval Shipyard using DODAAC N50286, with notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, and no shipment is permitted without formal acceptance. The contract is issued under Emergency Acquisition Flexibilities and is rated DO under the Defense Priorities and Allocations System, requiring strict adherence to Buy American and small business subcontracting requirements. Configuration control is tightly enforced, with any deviation or waiver requiring formal review and approval by the Contracting Officer, and all engineering changes must be submitted as Class I or II ECPs with full-life cycle impact analysis. Government source inspection is required at all production sites, including subcontractors, and all subcontracted work must carry forward the full quality and traceability requirements. Electronic signatures are accepted in place of handwritten ones, provided they are secured, auditable, and controlled per strict standards, and all foreign certifications must include US unit conversions signed by an authorized representative.
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
LA IEM TACTICAL EHFThis contract pertains to the procurement of a Hull Penetrating Assembly designated as SPECIAL EMPHASIS material (Level I, Quality Assured) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel itself. The material must strictly comply with LaBarge Inc. drawing 7-21740 and associated specifications, with detailed requirements for chemical and mechanical properties, particularly for components made from QQ-N-286 material and SAE AMS 5666 bar stock. Certification of all critical materials, welds, and tests is mandatory, including tensile, hardness, hydrostatic, electrical, and ultrasonic inspections, with results traceable to unique heat lot numbers and permanently marked on each component. All test and certification data must be submitted electronically via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with inspection and acceptance authority vested in N39040 and shipping directed to N50286. The contract mandates 100% inspection of traceability, certification documents, and nondestructive test results, and enforces zero defect tolerance during final lot acceptance. A comprehensive quality assurance regime is established, requiring the contractor to maintain an ISO-9001 or MIL-I-45208 compliant quality system, with calibration standards aligned to ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025. Government Quality Assurance representatives retain full rights to inspect at source, including subcontractor facilities, and all sub-tier suppliers must adhere to the same traceability, certification, and documentation standards. Welding and brazing procedures require formal approval prior to execution, and repair welding on QQ-N-286 is prohibited; all weld filler metals must be certified and traceable. Electronic signatures are accepted on certifications provided they are uniquely tied to authorized individuals and documents cannot be altered post-signature. The contractor must ensure material traceability from raw stock through all manufacturing and subcontracting steps, with strict segregation, marking, and documentation controls. Mercury and molybdenum disulfide are prohibited, and anti-galling compound A-A-59004 must be used for threads. The contract is issued under Emergency Acquisition Flexibilities, holds a “DO” priority rating under the Defense Priorities and Allocations System, and is subject toBuy American and Small Business Subcontracting Plan requirements, with all deviations or waivers requiring
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
POWER SUPPLYThis contract pertains to the repair of a POWER SUPPLY under a fixed-price arrangement, with all work required to meet strict technical and quality standards defined by military specifications. The contractor must perform teardown and evaluation of received carcasses within 90 days and submit a firm-fixed price quote that includes all associated costs such as handling damaged or incomplete units, missing hardware, repair labor, and CAV reporting. The repair must adhere to approved contractor procedures, drawings, and technical orders tied to the specified CAGE code 0KPC5 and reference number CCHA41186-1. Items must be marked in accordance with MIL-STD-130 Rev N and packaged per MIL-STD-2073. Any design, material, or part number changes require prior written approval from the contracting officer and must be classified under one of six defined code categories. The award is subject to Defense Priorities and Allocations System (DPAS) certification and is issued under Emergency Acquisition Flexibilities. The contract mandates full compliance with Buy American provisions, cybersecurity maturity model requirements, and small business set-aside conditions, with the offeror required to provide a small business subcontracting plan. Electronic submission and acceptance of proposals are binding upon receipt, and non-original equipment manufacturers must submit authorization letters from the OEM. All inspection records must be maintained for 365 days post-delivery. The point of contact for inquiries is James E. Lewis, reachable via email and phone, with responses due by August 10, 2026. The requirement is administered by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, under solicitation number N0010426QND66, and all contractual documents are deemed officially issued upon electronic transmission. The repair price must reflect estimated costs for the entire repair effort, including new part cost for evaluation, and any deviations from solicitation requirements must be explicitly stated; otherwise, the award will strictly follow the stated terms.
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in 17 days
View Details
NAICS: 335931
New
SLED
Cabling MaterialsThe Chickasaw Nation is soliciting quotes for cabling materials under solicitation number 27490, with a deadline for responses set for July 27, 2026, at 7:00 PM. This request is open to vendors interested in supplying materials needed for cabling infrastructure, though specific item details are outlined in the accompanying attachment. The solicitation is posted on the Chickasaw Nation’s business network portal and is designated as a tribal government procurement, with no set-aside classification specified. All inquiries and communications should be directed to Chloe Miller at chloe.miller3@chickasaw.net. The place of performance and organizational address details are not provided, indicating the work may be conducted across multiple tribal facilities or locations under the Chickasaw Nation’s jurisdiction. Submitting a responsive quote before the deadline is required to be considered.
Chickasaw Nation

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 335931
New
DIBBS
Electric Space Heater SupplyThe contract requires the supply of three electric space heaters under CLIN 0001, with all units mandated to meet federal specifications and adhere to hazardous materials handling requirements. The procurement is classified as a subcontract under NAICS code 335931, which pertains to other heating equipment manufacturing, and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The place of performance is designated as New Cumberland with ZIP code 17070-5002, indicating the location where the equipment will be delivered and utilized. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, providing a window of approximately eleven days for potential vendors to submit proposals. All deliveries must comply with applicable federal standards to ensure safety, functionality, and alignment with defense logistics protocols.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThe contract specifies a single cable assembly identified by NSN 5995-01-680-4126, with a delivery requirement of 155 days after order. It incorporates stringent technical and quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements as administered by a certified third-party assessment organization, and the contract includes provisions for physical identification and bare item marking. Covered defense information applies, and all packaging must comply with DLA packaging standards. The technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and only DLA contractors with approved JCP certification, completed export control training, and formal approval may access it. The requirement is governed by DFARS 252.225-7048, and non-accepted supplies must have government identification removed. The solicitation, issued under SPE4A0-26-T-4020 with a response deadline of July 31, 2026, is classified under NAICS 335931 and managed by the Department of Defense’s Aviation Supply Chain Esoc Buys office, with Danita Davis as the primary point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to a single cable assembly with NSN 5995-01-725-0155, requiring delivery within five days of award, and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Compliance with cybersecurity requirements mandates CMMC Level 2 certification by a third-party assessment organization, and adherence to DLA packaging specifications is enforced. All items must be marked in accordance with physical identification standards, and any non-accepted supplies must have government identification removed prior to return. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with verification levels or AQLs assigned based on attribute criticality—VII for critical, IV for major, II for minor—and unspecified attributes default to major. Zero non-conformances are required in sample lots unless otherwise stated. The technical data associated with this item is subject to export control under ITAR or EAR, requiring authorization for any disclosure to foreign persons, including foreign nationals within the U.S., and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The solicitation, issued under SPE4A6-26-T-09MQ, has a response deadline of July 31, 2026, and is managed by the Department of Defense’s ASC Commodities Division with performance at Camp Pendleton.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSUREThis contract pertains to the procurement of a single pressure switch, identified by NSN 5930014622771 and part number 15824 from HYDRA-ELECTRIC COMPANY, with a delivery requirement of one unit. The item is designated as a critical application component and must be delivered FOB origin within 274 days, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and strict packaging standards are mandated under MIL-STD-2073-1E and MIL-DTL-28786C, with marking conforming to MIL-STD-129P and including the special code 05 for delicate instrument. Packaging must also adhere to DLA’s overarching packaging requirements and hazardous materials protocols under IP025. The delivery address is specified as DLA Distribution San Diego, with the original required delivery date set for November 12, 2026, and a need ship date of May 5, 2027. All technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is governed by tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and government identification must be removed from any non-accepted supplies. The solicitation number is SPE7M8-26-T-5570, issued on July 23, 2026, with responses due by August 3, 2026.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
HARNESS ASSEMBLY, SIThis contract specifies the procurement of a harness assembly designated as SI with NSN 5999-01-577-3815 and part numbers 5151041-005 for Raytheon Company and ABC56537-005 for Glenair Inc. Two units are required at a unit price of $2.00, with a total contract value of $4.00, and delivery must be made FOB origin within 94 days of the required delivery date of July 1, 2026, with an actual ship date no later than March 24, 2026. The item is classified as a critical application item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking, and palletization must adhere to DLA packaging requirements. The harness assembly must be delivered to the specified DLA distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and all supplies must be marked in accordance with physical identification standards. Removal of government identification from non-accepted supplies is required, and hazardous materials handling, if applicable, must meet IP025 standards. The DLA unit of issue is in each, and all transportation logistics are governed by DLAD procedural notes C19 and C20.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThis contract specifies the procurement of a cable assembly with part number C174.00 and NSN 5995-01-551-8016, requiring one unit to be delivered within 20 days to the USS GRIDLEY DDG 101 at FPO AP 96666, with delivery terms FOB destination and no variance allowed in quantity. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, unit containers, and marking requirements; mercury and mercury compounds are strictly prohibited in packaging and preservation. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with corresponding verification levels or AQLs. The contractor must adhere to DLA’s packaging and identification standards, including the removal of government identification from non-accepted items and physical marking of bare items. Cybersecurity compliance at CMMC Level 2 is required, and covered defense information protections apply. The item must be shipped via traceable means using the RDD 777 code, and parcel post is explicitly prohibited. The contract references the DLA Master List of Technical and Quality Requirements for incorporated specifications and uses the DoD authorized unit of issue, with final acceptance occurring at the delivery point. The solicitation was issued under SPE4A6-26-T-09NM with a response deadline of July 31, 2026, and the original required delivery date is June 23, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESSThe contract pertains to the procurement of 107 wiring harnesses with NSN 6150-01-676-4143 under solicitation SPE4A6-26-Q-1203, with a response deadline of July 27, 2026, and a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with predefined verification levels or AQLs assigned to critical, major, and minor attributes, and zero non-conformances required unless otherwise stated. Physical identification of items must meet specified marking standards. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorizations from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and DLA authorization are permitted access to such data. The contracting activity is the ASC Commodities Division under the Department of Defense, with Mary Munar designated as the point of contact.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 333998
New
Federal
16--TUBE, DRAINThis contract solicitation, numbered N0038326QQB01, seeks procurement of a 16-inch drain tube under the North American Industry Classification System code 333998, with a small business size standard of 1,250 employees. The solicitation was posted on July 24, 2026, and responses are due by August 24, 2026, following a 30-day extension. Performance is to be conducted by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania, with primary point of contact provided via email and phone. Mandatory compliance with several federal clauses applies, including the Warranty of Supplies of a Noncomplex Nature, which requires a one-year warranty post-delivery and allows 45 days after defect discovery for remedies. The Buy American Act, Free Trade Agreements, and Balance of Payments Program certifications are required, along with strict limitations on pass-through charges and security prohibitions. Contracting officers must use Workflow Pro's Assist Module, and payment must follow Wide Area Workflow instructions via combined invoice and receiving reports. The contract enforces Equal Opportunity for Workers with Disabilities, mandatory use of AbilityOne support contractors, and compliance with priority rating DO-A1A for national defense purposes. All parties must submit Annual Representations and Certifications under deviation guidelines, and royalty obligations are retained as stipulated. The contract prohibits unauthorized disclosure of offeror information and adheres to all applicable defense procurement regulations.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333415
New
Federal
41--FLEXIBLE DUCTThe solicitation is for 100 units of flexible duct with NIIN 016645640 and part number CS9018-01-360-2, issued by the Navsup Weapon Systems Support under the Department of Defense. Responses must be submitted via email to christopher.campellone.civ@us.navy.mil by the deadline of August 24, 2026, at 8:30 PM Eastern Time, and early or incremental deliveries are preferred. Only approved sources may be awarded; non-approved vendors must submit full documentation as outlined in the NAVSUP WSS Source Approval Brochure available online, or their proposals will be rejected. Government source approval is mandatory prior to award, and failure to meet this requirement may result in the requirement being delayed or reassigned based on fleet support needs. The contract is classified under NAICS code 333415 and includes mandatory compliance with federal regulations, including Buy American provisions, security prohibitions, equal opportunity for workers with disabilities, warranty coverage of 12 months with a 60-day defect discovery window, and the mandatory use of Workflow Pro’s Assist Module. Payment instructions and invoice processing follow the Wide Area Workflow system, and royalty obligations, national defense priority ratings, and annual certifications are all applicable. The place of performance and delivery details are unspecified, but the contracting office is located in Philadelphia, Pennsylvania.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
99--FAIRING INBOARD,LOWThe U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole-source contract to The Boeing Company for 28 units of the Lower Fairing Drive part, identified by NSN 1R-0000-LLF02N981-GF and part number 74A192793-1004, exclusively for use on G-F aircraft. This part is critical for aircraft maintenance and has no interchangeable alternatives, as The Boeing Company is the original equipment manufacturer and the sole known source with the proprietary data and rights necessary for production. The government does not possess the technical data rights required to source this part from any other vendor, and this procurement is justified under 10 U.S.C. 2304(c)(1) and FAR 6.302, allowing noncompetitive acquisition due to the absence of viable alternatives. The contract will last one year, with delivery occurring FOB origin, and will include UID marking and Buy American requirements. The solicitation will be conducted electronically via NECO under FAR Part 15 procedures, with no use of commercial item acquisition policies. The RFP is anticipated to be issued on July 24, 2026, with proposals due by August 24, 2026, and an award expected by September 24, 2026. While the notice is not a request for competitive bids, any firm capable of supplying the item as a commercial item may respond within 15 days of the notice, and all submissions received within 45 days of publication will be reviewed for potential competitive alternatives. No small business set-aside is planned, and all sources must comply with source approval requirements; new manufacturers must submit a Source Approval Request, though the procurement will proceed without waiting for approval. Interested parties must submit capability statements via email to the designated point of contact, and no phone calls or hard copies will be accepted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
53--CLAMP,LOOPThis contract, issued under solicitation number N0038326QQA80 by the Navy’s Naval Supply Systems Command Weapon Systems Support, seeks a contractor to supply 53–CLAMP, LOOP, with strict requirements tied to military specifications and quality assurance standards. The work falls under NAICS code 332510 and is subject to a small business size standard of 750 employees. The contractor must comply with MIL-STD-130 for item marking and maintain a quality control system compliant with Mil-I-45208A, Mil-Q-9858, or ISO 9000/9001/9002 equivalents. All inspections, repairs, and testing procedures must be documented, approved by the Government, and supported by sequential diagrams and performance specifications. The contractor is responsible for inspecting all purchased materials against the Technical Data Package, maintaining detailed records for at least 12 months, and implementing controls for nonconforming material, including segregation and disposition protocols. The Internal Review Board has limited authority for minor rework but cannot approve “AS-IS” dispositions, which remain under Government control via the Material Review Board. Repair assessment testing by Government personnel may occur quarterly on randomly selected items, and complete historical records—including inspection data, repair cards, part replacements, and test results—must be maintained by serial number and made available upon request. The contract includes mandatory compliance with several federal and DoD regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and equal opportunity requirements for workers with disabilities. Warranty coverage extends one year after delivery, with defects to be reported within 45 days of discovery. All invoices and receiving reports must be submitted via the Wide Area Workflow system, and use of the Workflow Pro Assist Module is required. The contractor must submit royalty information, adhere to priority ratings for national defense use, and certify compliance with Federal Acquisition Regulation clauses, including annual representations and certifications. The point of contact for inquiries is Deja S. Thompson-Mitchell, reachable via email, with proposals due by August 24, 2026. Packaging must conform to MIL-STD-2073, and all work is to be performed in accordance with the Statement of Work, regardless of whether specific inspection clauses are explicitly listed. Failure to meet any requirement may result in rejection of deliverables, even under sampling protocols, as the Government reserves the right to reject known defective items.
Hardware Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339991
New
Federal
49--FILLER AND BLEEDER,The contract solicitation NSN 1R-4920-012695376-SX seeks three units of a filler and bleeder component under solicitation number N0038326QPC09, with delivery terms set at FOB origin. The requirement is managed by the Navy Supply Systems Command Weapon Systems Support, based in Philadelphia, Pennsylvania, and is posted as a presolicitation with responses due by September 8, 2026. Offerors must ensure that the product, manufacturer, or themselves meet all qualification requirements at the time of award, as governed by FAR clause 52.209-1, and must verify compliance through approved military and federal specifications available via ASSIST-Online or the DoD Single Stock Point. The Government is not applying commercial item acquisition policies under FAR Part 12, but interested parties may still propose commercial alternatives within 15 days of this notice if capable of meeting technical requirements. All documentation referencing patterns, drawings, or deviations is not available at DODSSP and must be obtained through alternate channels. For inquiries, potential bidders may contact the primary point of contact, Shamus F. Roache, via email or phone as listed.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details
New
Federal
99--DUCT,EXTRACTOR OUTLThe government is seeking to procure two units of a flight-critical extractor duct under NSN 1R-9999-LLJMPZ995-QE and REF NR 821312-2, with delivery terms FOB origin, due to the absence of sufficient, accurate, or legible technical data that would permit acquisition through full and open competition. Only sources previously approved by the Government for this item have been solicited, as the technical nature of the part and its critical role in flight systems necessitate source approval prior to contract award. The time required to evaluate and approve a new source would delay delivery beyond mission-critical timelines, so the procurement will proceed under the authority of FAR 6.302-1, allowing sole-source negotiation. All prospective offerors, regardless of prior approval status, must submit complete source approval documentation as detailed in the NAVSUP Weapon Systems Support brochures, either demonstrating existing experience with similar items or providing full technical data for new manufacturers. Offers lacking required documentation or proof of a pending approval request will be deemed nonresponsive. Approval evaluations underway must be substantiated with a copy of the cover letter forwarded to NAVSUP WSS. The solicitation number is N0038326QNA54, with a response deadline of July 30, 2026, and is published as a presolicitation notice allowing all responsible sources to express interest or submit proposals within 45 days, or 30 days if awarded under an existing Basic Ordering Agreement. While this notice is not a request for competitive bids, submissions received within the timeframe will be evaluated to determine whether competition is feasible; however, the Government retains full discretion to proceed without competition based on fleet support needs and technical constraints. Technical documents such as military specifications, qualified product lists, and standards can be obtained via ASSIST-Online or the DoD Single Stock Point, though drawings, patterns, and deviation lists are not available there. The primary point of contact for inquiries is Arianna G. Pilla of the Department of Defense, Navy Supply Systems Command, and all communications must reference the official SAM.gov listing for this requirement.

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
70--MEMORY UNIT,AIRCRAF, IN REPAIR/MODIFICATION OFThe contract solicitation NSN 7R-7010-015350456-QE seeks 58 memory units for aircraft in repair or modification, with delivery terms set at FOB origin. The item is associated with TDP version 002 and falls under a presolicitation by the Naval Supply Systems Command Weapon Systems Support, a division of the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by September 8, 2026. The office is located in Philadelphia, Pennsylvania, and the point of contact is Ethan T. Stein, reachable via email at ETHAN.T.STEIN.CIV@US.NAVY.MIL or by phone at (215) 697-2983. No set-aside classification or NAICS code is specified, and the place of performance details are not provided, indicating that delivery responsibility rests with the vendor at the point of origin.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
16--REEL,SHOULDER HARNEThis solicitation, identified as N0038326QFA99, is a total small business set-aside for the procurement of a reel shoulder harness under NAICS code 336413, issued by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania. The requirement is subject to mandatory source approval, meaning all offerors must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure to be eligible for award; failure to do so will disqualify the proposal. The Government has determined that no other source can currently meet its needs due to insufficient or inadmissible data, and award may proceed based on fleet support requirements if source approval cannot be finalized in time. The solicitation mandates compliance with numerous federal regulations including Buy American provisions, limitations on pass-through charges, security exclusions, and the mandatory use of Workflow Pro’s Assist Module, alongside specific payment and identification instructions. The contract is awarded based on best value, evaluating price, capacity/delivery capability, and past performance. Offers must be submitted electronically via email to kate.n.schalck.civ@us.navy.mil no later than August 24, 2026, at 8:30 p.m. Eastern Time. The Government accepts proposals via email as binding agreements upon acceptance, and all awardees must comply with the requirements for item unique identification, valuation, and royalty information as specified. The point of contact for inquiries is Kate N. Schalck, with a direct phone number provided, and all correspondence must reference the solicitation number and adhere strictly to the detailed compliance obligations outlined.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
99--RECEIVER TRANSMITTE, IN REPAIR/MODIFICATION OFThis contract solicitation, identified by NSN 0R-0098-LLZ98S445-CC and solicitation number N0038326RSB22, seeks a sole source procurement for 10 units of a receiver transmitter to be repaired or modified, with delivery terms set at FOB origin. The Government has determined it lacks sufficient, accurate, or legible data to procure from any other source, making this requirement exclusively available to the current provider. Items under this acquisition are subject to both the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, requiring compliance with relevant international procurement rules. Government Source Approval is mandatory prior to award, and offerors who are not pre-approved must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure; failure to include all required information will result in disqualification. The solicitation was posted on July 24, 2026, with proposals due by September 8, 2026, and is issued by the Naval Supply Systems Command Weapon Systems Support office located in Philadelphia, Pennsylvania. The contract becomes effective upon the Government’s acceptance of the contractor’s proposal through electronic transmission, mail, or fax, and all inquiries should be directed to the listed point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 334513
New
Federal
66--TRANSMITTER,PRESSURThe contract pertains to the procurement of a transmitter, pressur, under solicitation number N0038326QSB19, issued by the Naval Supply Systems Command Weapon Systems Support and falls under NAICS code 334513 for communications equipment manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of August 24, 2026, and requires offers to comply with mandatory government regulations including Buy American provisions, security prohibitions, and warranty terms for noncomplex supplies, which include a 12-month warranty with a 60-day window for defect discovery. All proposals must adhere to the mandatory use of Workflow Pro with the ASSIST module and include complete source approval documentation as defined in the NAVSUP WSS brochure, as the items require prior government source authorization—failure to provide all required data will result in disqualification. Payment instructions mandate the use of the Invoice and Receiving Report Combo Type through Wide Area Workflow, and transportation of supplies must comply with sea transport specifications. The contract also incorporates requirements for equal opportunity for veterans and workers with disabilities, value engineering considerations, and integrity of unit pricing, with no set-aside type specified. A notice of priority rating for national defense and emergency preparedness applies, emphasizing urgency. Point of contact information is listed as Charles F. Horan, reachable via email or telephone, and the place of performance and office address are in Philadelphia, Pennsylvania. Additional clauses cover royalty obligations, transportation by sea, and annual representations and certifications under a recent deviation, all of which must be satisfied. Offers must fully meet the source approval criteria, as incomplete submissions will not be considered for award, and the government may proceed based on fleet support needs if timely approval cannot be secured.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--VALVE,ECS, IN REPAIR/MODIFICATION OFThis solicitation is a sole-source procurement by the Navy’s NAVSUP Weapon Systems Support for the repair and modification of an ECS Valve, identified by part number 7RH 1660 016686579 P8 and drawing number 79318-423775-1. The work must be performed at Meggitt’s facility in North Hollywood, CA, and all repairs must conform to the latest approved revisions of technical manuals, drawings, and specifications. Items must be restored to a Ready for Issue (RFI) condition through overhaul or repair processes that include disassembly, inspection, component replacement, reassembly, and rigorous testing. The contractor is solely responsible for providing all tools, fixtures, test equipment, and materials unless explicitly designated as Government Furnished Property. All repairs require strict adherence to configuration control, prohibiting unauthorized changes to processes, sources, or facilities without prior written approval from the Procuring Contracting Officer. Any deviations, including beyond economical repair (BER), missing on induction (MOI), or over and above (OAR) repairs, require formal documentation and DCMA concurrence before proceeding. The contractor must maintain a certified quality management system compliant with ISO 9001/SAE AS9100 and a calibration program meeting ANSI/NCSL Z540.3 or equivalent standards. All purchased parts must be new, as defined by FAR 52.211-5, and subject to receiving inspection with detailed documentation of dimensional, material, and process data. Cannibalization of parts is strictly prohibited unless explicitly authorized by NAVSUP WSS and the BDE. Items must be marked per MIL-STD-130, stored in controlled environments, and packaged according to MIL-STD-2073. The Government retains full authority over the final disposition of rejected, BER, or OAR items, and the contractor assumes all risk and cost for any work performed using unapproved methods or sources. The contract mandates a one-year warranty from the delivery date, with defects must be reported within 45 days of discovery. Proposals must be submitted by August 6, 2026, and remain valid for 120 days, with all communication routed through Danielle Junod at the designated Navy email address.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
29--HEAD,FLUID FILTERThe U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, is pursuing a sole source acquisition for one unit of a fluid filter head identified by NSN 1R-2945-016665604-H5 and part number 06353-08801-106, with delivery to occur FOB origin. The requirement is intended for award to Sikorsky Aircraft Corp under an existing Blanket Purchase Agreement N00383-26-G-P401, as the Government lacks sufficient, accurate, or legible technical data to allow for competitive sourcing. The item is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, necessitating prior Government Source Approval, which cannot be obtained within the required timeline to permit competitive bidding. Interested parties not already approved sources must submit full documentation as outlined in the NAVSUP WSS Source Approval Brochure; proposals missing this required information will be disqualified. The solicitation, issued under number N0038326QFB01, has a response deadline of September 8, 2026, and is publicly posted as a presolicitation with no set-aside designation. The sole point of contact for questions is Taylor M. O'Connor, reachable via email or phone at the provided Naval facility in Philadelphia.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

in about 2 months
View Details