Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

59--JUNCTION BOX

Awarded

SPE4A726T451JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled "59--JUNCTION BOX" was awarded under solicitation number SPE4A726T451J and was posted on June 30, 2026. It falls under NAICS Code 327110, which corresponds to the manufacturing of glass and glass products, indicating the procurement involves specialized components likely used in electrical or defense systems. The awarding agency is the Defense Logistics Agency Aviation under the Department of Defense, with the office located in Richmond, Virginia, at a ZIP code of 23237. The point of contact for this contract is Dustin Smith, reachable via email at Dustin.1.Smith@dla.mil, and no specific place of performance has been designated beyond the agency’s location. There is no set-aside designation specified for this award, meaning it is open to all eligible contractors without restriction based on small business, veteran-owned, or other preferences. The contract details are accessible through the SAM.gov platform using the provided UI link.

General Info

59 junction boxes awarded under DLA Aviation solicitation SPE4A726T451J, open competition, contact Dustin Smith.

Agency

Department Of Defense → DLA AviationView Agency

Contract Value

$73,055.6

NAICS

327110 - Pottery, Ceramics, and Plumbing Fixture ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Awardee

HEILIND MIL-AERO, LLCView Profile

Award Issued Date

06/30/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedJun 30

Award Notice

AwardedJun 30

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

Dustin Smith

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=08e0a05730244dceb075e674c984540e

Similar Contracts

CHASSIS, ELECTRICAL-ELEThis contract pertains to the procurement of a chassis for electrical-electronic equipment, identified by NSN 5975-01-690-7483 and part number CAS000555, with a quantity of nine units. All items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The item is designated as a critical application item, and the manufacturer is Elma Electronic Incorporated. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging standards. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in specific exempted cases such as batteries, fluorescent lamps, sensors, or instruments as defined by NAVSEA, and any portable devices containing mercury must be shockproof with a secondary containment. Preservation and packing methods must exclude mercury entirely. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the required delivery window is 171 days from contract award, with a need ship date of January 10, 2027, and an original required delivery date of March 14, 2027. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California. The contract is under solicitation SPE4A7-26-T-570W, with a response deadline of July 22, 2026, and the North American Industry Classification System code is 327110.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

PLATE, WALL, ELECTRICThe contract specifies the procurement of two units of a wall electric plate with NSN 5975-01-721-6814 and part number 3351356-1 under solicitation SPE4A5-26-T-283U, with a delivery requirement of 183 days FOB origin and zero tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items must follow commercial packaging standards. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal engineering change proposals and variance requests, and all documentation must align with sourcing approval and identification protocols including bare item marking and removal of government identifiers from non-accepted supplies. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 17, 2027, and inspection and acceptance occur at destination. The contract incorporates defense information handling protocols and references specific DLA procedural notes for transportation logistics.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

De-centralized Manufacturing of Low-Cost, Sustainable Cementitious BindersThe agreement aims to advance a decentralized manufacturing system for sustainable, low-carbon cementitious binders that can replace up to 90 percent of traditional Portland cement in ready-mix concrete production. This initiative leverages industrial waste and natural pozzolans combined with C-Crete’s proprietary binder to drastically reduce the carbon footprint of concrete manufacturing while maintaining structural performance. The pilot facility will be located in San Leandro, California, serving as a proof-of-concept for widespread adoption by cement and concrete suppliers across the state, with the goal of enabling a scalable, economically viable alternative to conventional cement. The project operates under the State of California Energy Commission, with primary oversight managed by Neeva Benipal as Commission Agreement Manager and Rouzbeh Savary from C-Crete serving as Project Manager. The initiative aligns with California’s environmental objectives and is exempt from CEQA review based on staff recommendations. The pilot will test the technical and operational feasibility of decentralized production, empowering local ready-mix operations to produce binder materials on-site or regionally, reducing transportation emissions and supply chain dependencies. The timeline is set for the project to be pursued starting July 7, 2026, and the effort is intended to catalyze broader industry transition toward low-emission construction materials.

Energy Commission

POSTED

DEADLINE

Ceramic Nest Module Supply and InstallationThe contract entails the supply and installation of 75 new ceramic nest modules and the retrofitting of 45 existing seabird nests with elevated sunshields to enhance durability and climate resilience on Año Nuevo Island. These nesting structures are specifically designed to protect seabird populations from rising temperatures and environmental stressors by providing stable, long-lasting nesting habitats. The ceramic materials ensure resistance to erosion, salt exposure, and extreme weather conditions typical of the coastal environment. All work must be completed in accordance with ecological guidelines to minimize disruption to nesting species and their natural behaviors. The project is classified under NAICS code 327110, indicating it involves the manufacturing of ceramic products, and is structured as a subcontract under the California Department of Parks and Recreation. The performance location is designated with zip code 94060, corresponding to Año Nuevo Island, where all installations must occur. The solicitation was posted on July 6, 2026, and the effort is part of a broader initiative to conserve and restore critical seabird breeding habitats under the state’s conservation and climate adaptation mandates. All materials and installation methods must meet specified environmental and durability standards to ensure the long-term success of the nesting program.

California Parks and Recreation, Department of

POSTED

DEADLINE

Supply of Elongated Toilet Bowls (White, RH)The contract requires the supply of elongated, right-hand flush toilet bowls in white, specifically matching models such as the Cadet PRO 3517A101.020 or an approved equal, for installation in resident bathrooms. The items must meet specified quality and functional standards to ensure compatibility and durability in institutional or residential healthcare settings. The solicitation is classified as a subcontract under NAICS code 327110, which pertains to ceramic plumbing fixture manufacturing, indicating that suppliers must have the capability to produce or source compliant fixtures that align with industry benchmarks. The contract was posted on June 29, 2026, with a response deadline of July 16, 2026, at 4:30 PM, giving potential vendors approximately three weeks to submit proposals. The contracting entity is the Health and Human Services Commission in Texas, though specific location or office details are not provided. The procurement is accessible through the TX SmartBuy portal, and while no set-aside provisions or point of contact information is listed, interested parties must ensure strict adherence to the technical requirements and submission timelines to qualify for award consideration.

Health and Human Services Commission

POSTED

DEADLINE