Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

59--RELAY,ELECTROMAGNET

Awarded
SPE7M126U3244Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is an indefinite delivery contract for a 59-RELAY, ELECTROMAGNET with an estimated quantity of 119,000 units and a ceiling value not to exceed $350,000.00. It was awarded under solicitation number SPE7M126U3244, posted on July 1, 2026, and is classified under NAICS code 335314 for electromechanical relay manufacturing. The contracting office is the DLA Land and Maritime, a component of the Department of Defense, located in Columbus, Ohio, with Desmond Forshey listed as the primary point of contact with email and phone details provided for procurement inquiries. This contract does not specify a set-aside type, indicating it is open to all eligible suppliers. The place of performance has not been defined in the provided data, and all award details are accessible via the SAM.gov portal link.

General Info

Indefinite delivery contract for 119,000 electromechanical relays, max value $350,000, DLA Land and Maritime.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$0

NAICS

335314 - Relay and Industrial Control Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

GEMCAP COMPONENTS INC.

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → DLA Land And Maritime
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Desmond Forshey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Proposed procurement for NSN 5945013548786 RELAY,ELECTROMAGNET: Line 0001 Qty 119 UI EA Deliver To: By: 0147 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 8. The Guaranteed Minimum quantity will be 17. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 00779 12934604. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
Motor-Driven Relay Manufacturing
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-1016
Solicitation SPE7M5-27-T-1016, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for two electromagnetic relays identified as critical application items. The procurement specifies approved sources from Dare Electronics, Inc. (P/N AE101-013-99) and Leach International Corp (P/N VS232), with technical requirements governed by TDP Rev A Gen 1 and Basic Drawing NR 81205 204-15360 Revision E. Delivery is required by December 7, 2027, to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a need ship date of April 6, 2027. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the requirement is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation requires CMMC Level 2 certification and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and the prohibition of hexavalent chromium. All quotes must be submitted via the DIBBS system, and payment will be processed electronically through Wide Area WorkFlow.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-0954
Solicitation SPE7M5-27-T-0954 is a Request for Quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 54 electromagnetic relays, identified by NSN 5945-01-455-4498. This acquisition is a Total Small Business Set-Aside under NAICS code 335314. The required delivery date is December 27, 2028, with shipments destined for DLA Distribution San Diego. The contract specifies a delivery period of 735 days and requires the use of the Wide Area WorkFlow system for electronic payment requests and receiving reports. The contractor must adhere to strict quality and technical standards, including a CMMC Level 2 Self-Assessment and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-DTL 28786C, with specific requirements for ESD sensitive electronic device marking and component lead finish identification per IPC/JEDEC J-STD-609. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DLA Internet Bid Board System, and the award may be subject to the HUBZone price evaluation preference.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M1-27-U-0800
Solicitation SPE7M1-27-U-0800 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of electromagnetic relays, identified by NSN 5945-01-568-6682. The government seeks a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD and an estimated annual quantity of 14 units. The contract includes a guaranteed minimum quantity of 2 units once binding and a minimum delivery order quantity of 7 units. Delivery is required within 74 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and IPC/JEDEC J-STD-609 for component lead finish identification. All palletization must comply with DLA packaging requirements RP001. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, the awardee must comply with the Buy American Act, the Berry Amendment, and cybersecurity requirements including NIST SP 800-171 and DFARS 252.204-7012. Award will be based on the price quoted for the estimated annual demand.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-0955
Solicitation SPE7M5-27-T-0955, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for seven electromagnetic relays under NSN 5945011655260. The items are designated as critical application items and must comply with basic specification MS24143Y and reference specification MIL-PRF-6106R(1) SUP 1A. Delivery is required within 161 days after order, with a need ship date of April 6, 2027, and a final required delivery date of August 17, 2027. The shipping terms are FOB Origin, with the destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific unit package marking for component lead finish per IPC/JEDEC J-STD-609. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Offerors must comply with the Buy American Act and Berry Amendment, and items produced using additive manufacturing are ineligible for award. Administrative requirements include the use of the Wide Area Workflow system for invoicing and the submission of all quotes via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-1557
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-0847
Solicitation SPE7M5-27-T-0847 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 42 electromagnetic relays, identified by NSN 5945-01-410-8745. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of January 20, 2028, and a required delivery date of January 26, 2028. Delivery terms are FOB Origin, while both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for general marking, and RP001 for palletization. Specifically, individual unit packs must be marked to identify lead or lead-free attributes in accordance with IPC/JEDEC J-STD-609. Additionally, any hazardous materials must be labeled per the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. Quotations must be submitted via the DIBBS portal.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M5-27-T-1570
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-1625
Solicitation SPE7M5-27-T-1625 is a small business set-aside request for quotation issued by the DLA Weapons Support Active Devices Division for one electromagnetic relay, identified as a commercial off the shelf item with NSN 5945-01-669-6660 and part number KAD9F005. The requirement is designated as a critical application item, and the government has specified that surplus items are not acceptable. Delivery is required within 20 days after order, with a required delivery date of October 8, 2026, shipped FOB Origin to Altus Air Force Base, Oklahoma. The contract mandates strict quality and compliance standards, including FAA airworthiness approval and supply chain traceability documentation per DLA Directive Procurement Notes. Packaging and marking must adhere to MIL-STD-129, RP001, and RP003, with specific lead finish marking requirements per IPC/JEDEC J-STD-609. Inspection and acceptance will occur at the destination, utilizing a zero non-conformance sampling plan based on MIL-STD-105/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity reporting standards.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M1-27-T-0912
Solicitation SPE7M1-27-T-0912, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for 16,000 electromagnetic relays, identified by NSN 5945013162946 and part number M39016/32-001. The items are classified as critical application items and must comply with technical specification MIL-PRF-39016J(1) SUP 1, Revision J. Delivery is required by July 26, 2027, with a delivery period of 272 days. The shipping terms are FOB Origin, and the final destination for inspection and acceptance is the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for general marking. Additionally, contractors must apply lead finish markings to individual unit packs per IPC/JEDEC J-STD-609. Environmental and safety restrictions prohibit the use of Class I ozone-depleting substances and the intentional addition of mercury, except in specific approved functional cases. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Offerors are further cautioned that parts produced via additive manufacturing are ineligible for award and must comply with the Buy American Act and Berry Amendment.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M1-27-U-0948
Solicitation SPE7M1-27-U-0948 is an indefinite-quantity, small business set-aside contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 31 electrical solenids, identified by NSN 5945-01-623-4534. The contract requires delivery within 105 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Technical specifications are governed by basic drawing 53711 7246204 Revision D, and the contractor must adhere to strict quality and technical requirements from the DLA Master List, including configuration change management and the removal of government identification from non-accepted supplies. The contract mandates specific packaging and marking standards, requiring compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for general marking, and IPC/JEDEC J-STD-609 for component lead finish identification. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required and compliant with NAVSEA 5100-003D. Additionally, parts produced via additive manufacturing are ineligible for award. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment. Award evaluation is based on the price quoted for the estimated annual demand, with a price evaluation preference granted to certified HUBZone small business concerns.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335314
New
DIBBS
FLASHER, THERMAL
Solicitation # SPE7M5-27-T-1005
Solicitation SPE7M5-27-T-1005 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 21 thermal flashers, identified by NSN 5945-01-397-2110. The requirement falls under NAICS code 335314. Delivery is specified as FOB Destination Other, with a need ship date of March 15, 2027, and an original required delivery date of October 31, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific requirements include the removal of government identification from non-accepted supplies and precise bare item marking. Offerors proposing alternate parts must provide a complete data package for both the approved and alternate components for technical evaluation. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow system. Compliance is required across several federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, hazardous materials must be labeled according to the Hazard Communication Standard. The solicitation may be a candidate for automated award, and all submissions must be made through the DIBBS system.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 335999
New
Federal
INSULATING COMPOUND,ELECTRICAL
Solicitation # CM26161009
This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334310
New
Federal
HEADSET-MICROPHONE : NSN 5965-01-204-8505
Solicitation # SPE7MX26RX089
This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.
Audio and Video Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
Hatch, Marine
Solicitation # SPE7MX26RX102
DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.
Hardware Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332999
New
Federal
Supplier for Component NSN 015715718This subcontract through DLA Land and Maritime requires the manufacture or distribution of 603 units of hardware component NSN 015715718. The supplier must ensure all components meet strict government specifications, including the application of MIL-STD-129 markings and the use of standard commercial packaging. Additionally, the provider is required to submit proof of commerciality in accordance with FAR Part 12. The completed materials are to be delivered to prime contractors located in Columbus, Ohio. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 29, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 332999
New
Federal
Supplier for Component NSN 016603400This subcontract with DLA Land and Maritime requires the manufacture or distribution of 1,169 units of hardware component NSN 016603400. The supplier must ensure all components comply with government specifications and are delivered to Columbus, Ohio. The contractor is responsible for applying MIL-STD-129 markings and utilizing standard commercial packaging. Additionally, the supplier must provide proof of commerciality in accordance with FAR Part 12. This requirement falls under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 332999
New
Federal
Oshkosh Wholistic Sole Source Project
Solicitation # 75Q65
DLA Land and Maritime, specifically the Strategic Acquisitions office, is conducting market research for a potential Indefinite Delivery Indefinite Quantity (IDIQ) long term contract under solicitation 75Q65. The project focuses on the procurement of components and support for the Oshkosh MRAP-All Terrain Vehicle (M-ATV), including SOCOM variants and Mine Resistant Vehicles. Required items encompass a wide range of vehicular components, such as structural body parts, mechanical and electrical systems like wiring harnesses and fluid filters, and various specialized hardware and mounting brackets. While Oshkosh Defense is currently the only approved source, the agency is seeking additional manufacturers capable of producing these items. The procurement will be evaluated and awarded on a per NSN/CLIN basis, with specific requirements for standard commercial packaging and MIL-STD-129 markings. Interested parties must submit a Market Research Questionnaire by October 28, 2026, providing details on their business size, manufacturer status, and distribution networks. The performance location is listed as Columbus, Ohio, and the effort falls under NAICS code 332999. Estimated buy quantities have been identified for various components, though a total contract value has not yet been established.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 17 hours
View Details
NAICS: 332212
Federal
Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.
Hand and Edge Tool Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 339999
Federal
Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.
All Other Miscellaneous Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 333618
Federal
Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.
Other Engine Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 332710
Federal
Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.
Machine Shops

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 333618
Federal
MULTI NSN DIESEL ENGINE
Solicitation # CM26259595
DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.
Other Engine Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 332912
Federal
VALVE, REGULATING, FL
Solicitation # CM26163006
DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

9 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 335314
Awarded
Federal
59--RELAY,MOTOR DRIVEN
Solicitation # SPE7M526T047V
DLA Land And Maritime

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Closed
Federal
59--RELAY,ELECTROMAGNETIC
Solicitation # SPE7M526T294G
DLA Land And Maritime

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 335314
Awarded
DIBBS
61--CONTACTOR-3PST-NO
Solicitation # SPE7M1-26-P-8127
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Supply of Electrical Switch Element (NSN 5930-12-346-7916)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Manufacture of Switch Guards (Electromechanical Components)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Relay Assembly Supply (NSN: 5945016611221)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Flow Switch Supply and Delivery
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Supply of Flow Switches (NSN: 5930014591240)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Relay Module Manufacturing and Supply
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Supply of Electrical Control Units (NSN 6110-00-803-7310)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Electromagnetic Relay Supply (Commercial Off-The-Shelf)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Electrical Solenoid Supply and Testing
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS