Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

59--SHIELDING GASKET,EL

Active
SPE7M126U5079Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation seeks a shielding gasket, NSN 5999012551857, with a requested quantity of 54 units under an RFQ that may lead to an indefinite delivery contract lasting one year or until aggregate orders reach $350,000, with a guaranteed minimum of eight units annually. Deliveries will be distributed to multiple CONUS and OCONUS DLA depots via consolidated and containerized shipments, and the item is source-controlled, requiring procurement exclusively from the approved source identified as 27565 DA9723. All products must strictly conform to the drawing specifications referenced in the solicitation, with digitized drawings and military standards accessible electronically. Quotes must be submitted electronically by the deadline of August 21, 2026, and are open to all responsible sources without set-aside restrictions. The solicitation is managed by the DLA Land and Maritime office in Columbus, Ohio, and inquiries should be directed to the designated point of contact via email. No hard copies are available, and all documentation must be accessed through the official SAM.gov portal using the provided solicitation number.

General Info

Procure 54 shielding gaskets from approved source, annual min 8 units, delivery to DLA depots, quote by August 21, 2026.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / Agency
Department Of Defense → DLA Land And Maritime
View Agency Profile
Office AddressCOLUMBUS, OH, 43218-3990, USA

Full Description

Show more
Proposed procurement for NSN 5999012551857 SHIELDING GASKET,EL: Line 0001 Qty 54 UI EA Deliver To: By: 0155 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 8. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. This is a source controlled drawing item. Approved source is 27565 DA9723. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
Federal
Puller and Pusher Lip Seal Tooling
Solicitation # N5523626Q0107
This solicitation, numbered N5523626Q0107, is a sole-source combined synopsis and solicitation issued under FAR Part 12 for commercial supplies, specifically targeting Boeing Distribution Inc. for the procurement of Puller and Pusher Lip Seal Tooling required for intermediate-level repairs on Rolls-Royce T56 Model 250 engines aboard U.S. Naval ships. The requirement is justified under FAR 6.103-1 and 12.102 due to the unique and specialized nature of the tooling, which is essential for maintaining gas turbine-configured engines at the Southwest Regional Maintenance Center in San Diego, California. The North American Industry Classification System code is 339991, and the delivery must be completed by November 19, 2026, to support critical maintenance schedules. Although the solicitation is open to expressions of interest from other vendors, the government has determined not to compete the requirement and will proceed with Boeing as the exclusive contractor. The solicitation incorporates all applicable clauses and provisions under Federal Acquisition Circular 2026-01, effective July 2, 2026, and DFARS Publication Notice 20260702. Responses must be submitted by August 14, 2026, and are to be directed to the primary point of contact, Silvana Miranda, with secondary support from Ricardo Barraza-Cobos. The place of performance is in San Diego, California, and no set-aside is applicable. Detailed product specifications and requirements are referenced in the attached Product Description and COMSIS document. All communications and submissions must adhere to the terms governed by the Federal Acquisition Regulation as currently amended, and the solicitation constitutes the complete and exclusive basis for any contract award.
Southwest Regional Maintenance Center

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
Federal
RETAINER SLEEVE,SEA
Solicitation # N0010426QND29
This contract pertains to the supply of a Seat Retainer for a size 4 inch Hull and Backup Valve, designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), requiring strict adherence to Navy drawing 256348 and applicable military and industry standards including QQ-N-281, MIL-STD-792, ISO-9001, and S9074 series welding and brazing specifications. The material must be traceable from raw stock through every manufacturing step to final delivery, with unique heat-lot marking, full chemical and mechanical certification, and 100% inspection of all test reports and physical markings. Electronic submission of certifications via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard is mandatory prior to shipment, with strict rejection criteria for any missing, inaccurate, or unqualified documentation. All welding and brazing procedures and personnel must be pre-approved, and contractor quality systems must comply with ISO-9001 and ISO-10012 or be alternatively certified under MIL-I-45208 and MIL-STD-45662. Government quality assurance is conducted at source, and subcontractor controls are explicitly required to maintain the same traceability, sampling, and certification standards as the prime contractor. Any deviation, waiver, or engineering change affecting form, fit, function, or safety requires formal approval from the Contracting Officer and must be documented with complete impact analysis. The contract mandates zero defect acceptance for all final inspections, with sample sizes governed by ANSI/ASQ Z1.4 or military standards, and prohibits any use of mercury or mercury-containing compounds. Certifications must be signed with validated electronic signatures that are unique, auditable, and non-repudiable, with no disclaimers permitted. All documentation, including test reports, weld qualifications, and configuration data, must be submitted electronically via the ECDS system and retained in compliance with naval requirements. The item is subject to defense priority rating under DPAS, is part of a total small business set-aside, and falls under emergency acquisition flexibilities, requiring bilateral acceptance before execution. Packaging and preservation must adhere to MIL-STD-2073, and all delivered items must include complete, legible, and accurate certification records matching traceability marks on the physical components. The contract further prohibits marking of material with designators except for fasteners, requires strict separation of traceable materials to prevent commingling, and obligates the contractor to audit
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency