This Solicitation opportunity from Department Of Defense was posted on September 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SWITCH ASSEMBLY

Closed

SPE7M8-26-T-6873Federal

Submission Closed10/05/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E4-27-T-0292

Solicitation SPE8E4-27-T-0292 is a total small business set-aside request for 86 sheets of aluminum alloy metal sheet, specifically H-32 strain hardened and stabilized to 1/4 hard, with dimensions of 0.125 inches thick, 48 inches wide, and 96 inches long. The procurement is managed by DLA Troop Support and requires the supplier to be listed on the Qualified Suppliers List for Distributors (QSLD). Delivery is set for a need ship date of December 30, 2026, with a final required delivery date of February 10, 2027, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Strict quality and marking standards apply, including the requirement for a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Sheets must conform to exact dimensions, and test coupons are prohibited. Each unit must feature continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, applied via stamping or stenciling. The contract incorporates various federal regulations, including the Buy American Act, destination inspection requirements, and specific packaging standards under MIL-STD-2073-1E and MIL-STD-129. Payment and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system.

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0297

Solicitation SPE8E4-27-T-0297 is a procurement for seven sheets of cold-rolled annealed nickel-copper alloy metal (Class A, Form 4), measuring 0.187 inches thick, 42 inches wide, and 120 inches long. The material must be supplied in whole feet lengths and conform to exact dimensions to avoid rejection. Technical compliance is governed by standards including QQ-N-281D(2), ASTM A700-14, and SAE AMS2807C. A Certificate of Quality Compliance (Mill-Material Certification) is required for every shipment, and the procurement is subject to Metal Certification Contract Data Requirements Lists (CDRLs). Award eligibility is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous marking and packaging standards, requiring continuous identification markings via stamping or stenciling in accordance with MIL-STD-129 and MIL-STD-2073-1E. Delivery is set for FOB Origin with destination inspection and acceptance. This is a total small business set-aside procurement, and all quotes must be submitted via the DIBBS system by November 20, 2026.

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0475

Solicitation SPE8E9-27-T-0475 is a request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of 33 aluminum alloy metal sheets (NSN 9535-00-242-8595). The required material is Alloy 1100, Temper O-ANLD, with dimensions of 0.016 inches thick, 36 inches wide, and 96 inches long. All sheets must conform to exact dimensions with no test coupons allowed and must be supplied in whole feet lengths. The procurement is a total small business set-aside under NAICS 332313, with a required delivery date of May 20, 2027, and a need ship date of April 26, 2027, delivered FOB Destination to DLA Distribution San Joaquin in Tracy, California. Compliance with strict quality and marking standards is mandatory, as failure to adhere to these requirements will result in the rejection of the product. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Required documentation includes a Certificate of Quality Compliance (Mill-Material Certification) and adherence to Metal Certification Contract Data Requirements Lists and DD Form 1423s. Packaging and preservation must follow ASTM B660 and MIL-STD-2073-1E, while marking must comply with MIL-STD-129. Each unit must feature continuous identification markings, including the contract delivery order number, NSN, specification number, alloy, temper, manufacturer's name, heat and lot number, and dimensions, applied via waterproof stamping or stenciling.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8EE-27-Q-0075

Solicitation SPE8EE-27-Q-0075 is a small business set-aside for the procurement of crane wear plates (NSN 3950-01-342-4089) for the Department of Defense, issued by DLA Troop Support, Construction and Equipment Manu and Con. The requirement consists of two line items totaling five units, with a delivery timeline of 125 days after order. The contract is a fixed-price supply agreement with FOB Origin terms, and the final destination is the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance are conducted by the Government at the source. This procurement is subject to strict export controls under ITAR and EAR, requiring contractors to hold an approved US/Canada Joint Certification Program certification and comply with DFARS 252.225-7048. Technical requirements include adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the contractor must meet CMMC Level 2 cybersecurity standards and utilize the Wide Area WorkFlow system for all invoicing and payment requests.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

SOLICITATION-U.S. Army United States Military Academy (USMA), Cadet Issued Breast and Waist Plates

Solicitation # W911SD-27-Q-A009

The U.S. Army Mission and Installation Contracting Command West Point is soliciting quotes for the procurement of Cadet Breast and Waist Plates for the United States Military Academy. This is a firm-fixed-price requirement set aside 100 percent for small businesses under NAICS code 332313. The contract structure consists of a base period from December 1, 2026, to November 14, 2027, with four subsequent option years, providing for 2,700 units of each item per period. All products must adhere to MIL-DTL-1563/12B specifications, utilizing Yellow Brass 65/35 with a mirror-like polish on the front and a matte finish on the back and edges. Award will be determined on a lowest price pass/fail basis. To be considered, offerors must submit one physical sample of each plate for technical evaluation; a single major defect or two minor defects will result in a failure. Required packaging includes individual wrapping with 50 plates per box, and items must be marked on the back of the buckle in accordance with MIL-STD-130. Quotations and courier tracking numbers for samples must be submitted electronically to the designated point of contact by November 18, 2026. Invoicing and payment will be processed through the Wide Area WorkFlow system.

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-2453

Solicitation SPE7M1-27-T-2453 is a small business set-aside request for the procurement of Plate, Spline (NSN 1240-01-043-8210) for the DLA Weapons Support Maritime Supply Chain. The requirement is split into two line items totaling 74 units, with 8 units destined for the New Cumberland facility and 66 units for the Barstow facility. Delivery is required within 165 days after award, with a required delivery date of April 2, 2027. The contract is established as FOB Origin and utilizes the First Destination Transportation program to manage shipping costs. Technical compliance requires adherence to specific TDP Rev A Gen 1 drawings and the DLA Master List of Technical and Quality Requirements. Strict environmental and safety prohibitions are in place, specifically banning Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS cybersecurity and Buy American Act regulations.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Bearing Retaining Plate SupplyThis subcontract involves the supply of 162 Bearing Retaining Plates, identified by NSN 3110012117544, to support prime contractors working with the DLA Weapons Support ASC Commodities Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing these plates in strict accordance with NSN specifications, with performance taking place at Tinker AFB. A critical requirement of this agreement is adherence to domestic sourcing guidelines, mandating that the items be produced in the United States, its outlying areas, or Canada. Furthermore, the contractor must ensure that the total component cost consists of more than 50 percent content from these approved regions.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Heavy-Duty Coil Spring SupplyThis subcontract opportunity is for the supply of over 100 heavy-duty coil springs to be integrated into shock absorber assemblies for the Department of Defense, specifically under the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will be responsible for the winding and heat-treating of high-strength alloy steel to meet the technical specifications for NSN 2510-01-528-1547. A critical requirement of this contract is strict compliance with the Berry Amendment, ensuring that all steel is sourced domestically. The project is designated as a Total Small Business Set-Aside under NAICS code 332313, with performance taking place in New Cumberland. Interested parties must submit their responses by November 16, 2026. This effort supports prime contractors in delivering essential components for military vehicle armament and support systems.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

ABS-Certified Structural Steel Plate SupplierThis subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, seeks a supplier to provide 13 hot rolled, sheared edge, and annealed structural steel plates. The plates must be manufactured to dimensions of 0.250 inches by 72 inches by 240 inches in accordance with MIL-S-22698 and American Bureau of Shipping rules. Each delivery must include Certificates of Quality Compliance. To be eligible, the supplier must maintain a QSLD listing for FSGs 95 and 96 and obtain an ABS Surveyor endorsement on all certificates. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332313, with performance taking place in New Cumberland.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Plate Insulators (NSN 5970-12-32-4429-4)This subcontract involves the supply of 14 plate insulators to prime contractors for the Defense Logistics Agency Weapons Support ASC Commodities Division. The required components must strictly match NSN 5970123244294 and Part Number 310.14.0001, with all deliverables adhering to the DLA Master Solicitation Technical and Quality Requirements. The contract specifies a delivery timeline of 171 days and utilizes FOB Origin shipping terms. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332313. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

FLOOR, BODY, VEHICULAR

Solicitation # SPE7L3-27-T-2260

Solicitation SPE7L3-27-T-2260 is a fixed-price, small business set-aside contract issued by the DLA Weapons Support Land Supplier Operations for the procurement of seven vehicular body floors (NSN 2510-01-598-1375). The delivery is required 168 days after award, with a need ship date of May 4, 2027, and a final delivery date of June 4, 2027. Performance is based on FOB Destination Other, and all invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls, requiring offerors to hold an approved US/Canada Joint Certification Program certification. Inspection and acceptance will occur at the origin, with the manufacturer's inspection system required to meet SAE standards and provide a Certificate of Quality Compliance with every shipment. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must be labeled according to the Hazard Communication Standard. Notably, the government will not evaluate or award contracts to offerors utilizing additive manufacturing processes.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

DUCT ASSEMBLY, BLEED AI

Solicitation # SPE4A5-27-T-2629

This procurement, solicitation SPE4A5-27-T-2629, is for the supply of one engine bleed air duct assembly, identified as a critical application item. The required part is manufactured by The Boeing Company (P/N 5-97829-20) with NSN 1560-01-384-6695. The contract specifies a delivery timeline of 171 days after order, with shipping terms set as FOB Origin and the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015 and SAE AS9003. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging must comply with DLA requirements and MIL-STD-129, with specific protocols for hazardous materials per FED-STD-313. Additionally, the contractor must comply with cybersecurity standards, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing are to be processed electronically via the Wide Area Workflow (WAWF) system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

4 days ago

DEADLINE

in 3 days

AI Contract Overview

Solicitation SPE7M8-26-T-6873 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime Electrical Devices Division, for the procurement of two switch assemblies under NSN 5930016561989. The procurement falls under NAICS code 332313. All quotes must be submitted electronically via the DIBBS system by October 5, 2026. The approved source for this item is 81579 799-7701. Delivery is required within 168 days after award, with a need ship date of March 23, 2027, and a final required delivery date of August 2, 2027. The destination for delivery, inspection, and acceptance is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to commercial packaging standards per ASTM D3951 and marking and labeling requirements per MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must comply with RP001. Contractors are required to use the Wide Area WorkFlow system for all invoicing and payment requests. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information and cyber incident reporting. Additionally, any hazardous materials must be labeled according to the Hazard Communication Standard.

General Info

DoD seeks two switch assemblies via DIBBS by October 5, 2026.

Agency

Department Of Defense → ELECTRICAL DEVICES DIV

NAICS

332313 - Plate Work Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 24

Combined Synopsis

Response DeadlineOct 5

Deadline has passed

Submission Closed

10/05/2026, 01:00:00 PM EDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

Office AddressUSA

Contacts

Dondiego Boler

contact@example.gov

+1 (555) 000-0000

Full Description

SWITCH ASSEMBLY
SWITCH ASSEMBLY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5930-01-656-1989 Quantity: 2 EA Purchase Request: 7018496448QTY: 2 Delivery: 168 days ADO

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS