60--SOURCES SOUGHT - HERO Sensors and RadSens Unit

There is no solicitation available at this time. Requests for a solicitation will not receive a response. This Sources Sought Synopsis is in support of a market survey being conducted by White Sands Missile Range (WSMR), NM to determine potential sources technically capable and qualified to provide the following: HERO Sensors and RadSens Unit HERO sensors must work with the RadSens Unit PSC-D, be able to be calibrated using the RadSens Unit Internal calibration source PSC-DR-I-800 and make temperature measurements from 0 C to 120 C. The HERO sensors must have a fiber optic fast response time temperature probe for electrically explosive device (EED) tests ( less than 10 mS); provide complete immunity to Radio Frequency from 10kHz to 60GHz; be 1.37 meter long with PVC sheathing; ST connector; 3mm long bare fiber tip. The sensing unit must be small scale for bridge wire assembly and temperature sensing for HERO/RADHAZ applications and must be equal or better than Opsens Part # OTG-R. The RadSens unit must provide individual 5V analog outputs. Have 8 or more modules for measuring and a display capable of showing measurements from each module simultaneously. Provide high speed 1000 Hz sampling rate. Have an Ethernet RJ-45 connector for real time data with no loss of accuracy due to conversion between digital to analog. Have an internal current source up to 800mA for calibration of sensors and ability to make high speed simultaneous temperature measurements. The unit must be equal or better than Opsens Part # PSC-D. Any information submitted by respondents to this RFI is strictly voluntary. The government will not pay for any information that is submitted by respondents to this Sources Sought RFI. The government requests interested vendors submit a statement of capability to perform the requirement. Please omit any pricing data. Again, participation in this effort is strictly voluntary with no cost or obligation to be incurred by the Government. The Government will in no way be bound to this information if a solicitation is issued. Should funding be made available for this potential requirement, a Request for Proposal (RFP) will be posted on this website. The North American Industry Classification System (NAICS) code for the potential acquisition is 335921 with a size standard of 1000 employees. All responses to this notice expressing interest in being considered for the proposed contract, should include the following: Company Name, Point of Contact, Address, Telephone and Fax numbers, E-mail address, Brief Description of the Company and Capabilities, List of previous experience in the relevant field, Business Size, DUNS number, Cage Code, and Tax ID Number. Notice to Potential Offerors: All offerors who provide goods or services to the Department of Defense (DOD) must be registered in the System for Award Management (SAM) found at www.sam.gov. The Government reserves the right to reject, in whole or part, any contractor input resulting from this sources sought. The information resulting from this sources sought may be included in one or more RFP's, which may be released via the FEDBIZOPS portal. This Sources Sought Synopsis is issued for maximizing competition. Should anything in the requirement be construed as limiting competition, please feel free to contact the MICC Special Competition Advocate (SCA) at contact@example.gov. There is a preference for HUBZone small businesses. They are highly encouraged to submit their statement of capability to perform the requirement via email with a subject line marked Hero Sensors and RadSens Unit no later than 1300 MST on 13 March 2015. Any questions should be submitted before 10 March 2015 to Bernadette Quevedo contact@example.gov. Responses received after 13 March 2015 will not be considered.