Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

61--CONTROL,REMOTE SWIT

Active

SPE7M126T243PFederal

Response Deadline08/10/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation seeks 32 units of NSN 6110015205359 CONTROL, REMOTE SWIT under a Small Business Set Aside, with the NAICS code 334513, through a Request for Quotation issued by the DLA Land and Maritime office in Columbus, Ohio. All quotations must be submitted electronically by the deadline of August 10, 2026, with deliveries required to W1A8 DLA DISTRIBUTION within 159 days after award. Only approved sources, identified as 1A004 ABHCC-000 and 34914 985-6951, are qualified to respond, though any responsible source may submit a quote if timely received. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided; all information must be obtained through the official SAM.gov link. The primary point of contact for inquiries is via email, directing all questions to the buyer listed in the solicitation’s block 5, accessible through the provided online portal.

General Info

32 remote switch units requested by DLA, Small Business Set Aside, quotes due August 10, 2026, to W1A8.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process VariablesView NAICS

Place of Performance

OH

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJul 30

Combined Synopsis

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 12:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 6110015205359 CONTROL,REMOTE SWIT: Line 0001 Qty 32 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0159 DAYS ADO Approved sources are 1A004 ABHCC-000; 34914 985-6951. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

Wavetronix SmartSensor Matrix, Advance Detection Systems and Accessories

Solicitation # 601330000046719

The Texas Department of Transportation is soliciting proposals for the provision of Wavetronix SmartSensor Matrix, Advanced Detection Systems, and associated accessories for use within its Houston District. The solicitation, identified by number 601330000046719, was posted on July 30, 2026, with a strict deadline for responses on August 13, 2026, at 9:00 PM Central Time. All submissions must be received by this time, and no late responses will be accepted. Information updates, including addendums, questions, answers, or revisions, will be posted exclusively on the solicitation’s official website, and respondents are responsible for monitoring the site regularly for any changes. The contract is intended for state and local government use, with the Texas Department of Transportation as the procuring agency, and performance is expected to occur within the state of Texas. Primary point of contact for inquiries is Courtney Skains, reachable via email or phone as listed in the solicitation details.

Texas Department of Transportation

POSTED

about 10 hours ago

DEADLINE

66--BELLOWS UNIT ASSEMB

Solicitation # SPE4A526T315L

The U.S. Department of Defense through DLA Aviation is seeking quotes for 11 Bellows Unit Assemblies under NSN 6685011267205 through a Small Business Set Aside solicitation with the number SPE4A5526T315L. The requirement is for delivery to W1A8 DLA Distribution with a performance timeline of 177 days after award. Only approved sources—05991 D4R-256788 IT 111, 05991 S624-0176-Z, and 94756 D4R-14561 ITEM111—are eligible to respond. The solicitation is issued as an RFQ, accessible exclusively online via the provided SAM.gov link, with no hard copies available and no specifications, plans, or drawings provided to bidders. All responsible sources may submit electronic quotes, but submissions must be received by the deadline of August 7, 2026. The NAICS code is 334513, and the procurement office is located in Richmond, Virginia. Inquiries must be directed via email to DibbsBSM@dla.mil or through the additional information portal on DIBBS.

POSTED

about 19 hours ago

DEADLINE

INDICATOR, SIGHT, LIQ

Solicitation # SPE4A6-26-T-10HF

The contract pertains to the procurement of one unit of an Indicator, Sight, Liquid, identified by NSN 6680-01-552-1273, with a required delivery within 20 days FOB destination. The item is non-serialized and does not require Unique Item Identification under DFARS 252.211-7003(c)(1)(i), as specifically requested by the service customer. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-based inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, with marking in accordance with MIL-STD-129 and no special marking required. The item must be delivered to FPO AP 96678, USS SOMERSET LPD 25, via vessel shipment using the fastest traceable means, excluding parcel post. The physical identification must include the supplier name, part number, and Navy designation as specified for Ernst John C & Co Inc and Clark-Reliance LLC. The delivery is strictly fixed at one unit with no quantity variance permitted. The contract is issued under solicitation SPE4A6-26-T-10HF with a response deadline of August 6, 2026, and the requirement is categorized under NAICS code 334513, managed by the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Pressure Switch SupplyThe contract is for the supply of a pressure switch with NSN 6320-01-546-8858, intended for use in industrial pressure control systems. It is structured as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to bid, and the entire procurement is reserved for them. The North American Industry Classification System code 334513 identifies the relevant sector as instruments and related products manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, at 7:00 PM. The contracting activity is linked to the Naval Supply Systems Command Fleet Logistics Center Puget Sound, operating under the Department of Defense, though specific location details for the office or performance site are not provided. Interested parties must respond through the designated SAM.gov portal before the deadline to be considered for award.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Spotter Buoy Hardware Supply and MaintenanceThe contract covers the supply, refurbishment, and ongoing logistical support for Spotter buoys and their associated components, including sensors, power systems, and satellite communication modules, with full replacement liability guaranteed for all hardware. This effort ensures continuous operational readiness by maintaining high-performance maritime monitoring systems through proactive maintenance and timely replacements. The work is structured under a Small Business Set Aside, targeting qualified small businesses to fulfill the requirements, and falls under the NAICS code 334513 for communications equipment manufacturing. The U.S. Department of Defense, through the Naval Supply Systems Command Fleet Logistics Center Norfolk, is the contracting activity, with performance expected to align with military maritime operational needs, though specific geographic details are not provided. All deliverables must meet strict reliability and durability standards to function effectively in harsh oceanic environments.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

BRAND NAME OEM ALFA LAVAL INC GASKETS

Solicitation # N0040626Q0351

The solicitation N0040626Q0351, issued by Naval Supply Systems Command Fleet Logistics Center Puget Sound, seeks genuine OEM gaskets from Alfa Laval Inc for the AquaBlue E1 C125-HW-FS fresh water generator aboard USNS JOHN LEWIS (T-AO 205), a requirement restricted under COMSCINST 4490.1C due to the parts being designated ship-critical safety items, allowing procurement only from the original equipment manufacturer or its authorized sources. The contract is a firm-fixed-price acquisition under RFO Part 12, structured as a total small business set-aside with a NAICS code of 334513 and a size standard of 750 employees, requiring offerors to self-certify as small businesses and optionally disclose other socioeconomic statuses such as HUBZone, SDVOSB, WOSB, EDWOSB, or 8(a) participation. All submissions must include a signed SF30 Page 1 and be received electronically by 6:00 AM Pacific Time on August 3, 2026, directed to Vicktoria Wright and Joseph Ibrahim, with an anticipated award in August 2026. Delivery is FOB destination to San Diego, California, with all shipments required to be pre-notified 48 hours in advance to MSCPAC_BATS@us.navy.mil and delivered to Military Sealift Command BATS at 9284 Balboa Avenue, San Diego, CA 92123-5000. All items must be packaged and marked in strict compliance with MIL-STD-2073-1 or ASTM D3951 standards, with wood packaging conforming to ISPM-15 and bearing official treatment certification. Labels must clearly display the vessel’s name and hull number, requisition and purchase order numbers, and remove any prior conflicting markings. Every unit must be uniquely identified with a two-dimensional data matrix using ECC200 symbology per MIL-STD-130 and ISO/IEC 16022, encoded with Application, Data, or Text Element Identifiers in accordance with ISO/IEC 15434, and all shipments must be electronically processed via Wide Area WorkFlow (WAWF) using the Invoice and Receiving Report format. Acceptance occurs upon physical receipt at the destination by the Government

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Fluke 5560A/2G Multi-Product Calibrators

Solicitation # W8486-270947A

The Department of National Defence, under the Government of Canada, has issued a solicitation for the procurement of Fluke 5560A/2G Multi-Product Calibrators, with a response deadline of August 12th, 2026, and a requested delivery date of January 15th, 2027. Each calibrator must be accompanied by a Certificate of Calibration dated no more than 90 days prior to delivery, ensuring recent and verified accuracy. The solicitation, identified by number W8486-270947A, was published on Buyandsell on July 29th, 2026, and will remain active for 15 calendar days. The contract is open to federal procurement, with no specific set-aside designated, and performance is anticipated to occur in Canada. Viktoria Melnichuk serves as the primary point of contact for inquiries, reachable via email and phone, and all bids must be submitted through the official tender portal before the deadline.

Department of National Defence

POSTED

DEADLINE

Bio-capacitance probe system

Solicitation # 26-58103

The National Research Council of Canada is soliciting a four-probe bio-capacitance measurement system designed for real-time monitoring of cell cultures in up to four bioreactors simultaneously. The system must enable continuous, multi-frequency scanning to capture the capacitance distribution spectrum of living cells, allowing for the real-time derivation of critical bioprocess parameters including viable cell concentration, cell size, internal conductivity, and critical frequency through analysis of β-dispersion using the Cole–Cole α model. The probes must be compatible with the variety of bioreactor types currently in use, ensuring seamless integration across existing infrastructure. The system must support dual communication protocols: OPC-UA for data exchange with control and data acquisition systems and 4–20 mA analog output to allow direct integration into closed-loop process control. This ensures that real-time bio-capacitance data can immediately inform and adjust bioreactor operations without reliance on external software or manual intervention. The procurement is open under solicitation number 26-58103 with responses due by August 24, 2026, and is managed by Daniel Rusthoven, Contracting Authority at the Government of Canada.

National Research Council of Canada

POSTED

DEADLINE

Wireless Sensor and Data Logger SupplyThe contract seeks the supply of wireless temperature and humidity sensors designed for deployment in refrigeration units, with requirements for long battery life and NIST-traceable calibration to ensure high accuracy and reliability in critical environmental monitoring. These sensors must provide consistent, real-time data to support compliance and operational integrity within Texas Department of Criminal Justice facilities. The solicitation, categorized as a subcontract under NAICS code 334513, is open for responses until August 11, 2026, and is issued through the Texas SmartBuy procurement platform. Performance is expected to support state-operated refrigeration systems, though specific delivery locations are not detailed. Vendors must meet strict technical and calibration standards to qualify, and the procurement is not subject to any set-aside classifications.

Texas Department of Criminal Justice

POSTED

DEADLINE

Ashcroft Pressure Gauges

Solicitation # SS-26-00359

Hillsborough County is seeking to procure four specific Ashcroft pressure and vacuum gauges, all assembled with the 50310SS02TXCK diaphragm seal, as these are the only models meeting the exact technical and operational needs for municipal water and wastewater systems. The gauges—models 251009SWL02LXGV100, 251009SWL02LXGV160, 251009SWL02LXGV30IMV&60#, and 251009SWL02LXGV60—feature 2.5-inch stainless steel dials, liquid-filled cases with glycerine as standard and optional silicone dampening, and lower 1/4 NPT or 1/2 NPT process connections depending on model. All units are engineered with full stainless steel construction, including the diaphragm seals and housing, designed to handle pressures up to 15,000 psi and operate reliably in harsh outdoor and underground environments. The diaphragm seals provide complete isolation of the gauge from corrosive, abrasive, or chemically treated media found in wastewater and treatment systems, with zero-leak paths to prevent contamination and blockage, and are freeze resistant to withstand extreme temperature variations. Each gauge must deliver accurate, stable readings under vibration and pressure pulsations from pumps, air release valves, and lift stations, with movement designed to resist drift or damage from continuous mechanical stress. The systems are calibrated as matched assemblies to ensure precision, and each unit must be accompanied by a calibration certificate issued by a qualified assembler. The instrumentation is intended for continuous monitoring across lift stations, treatment plants, and ARVs, supporting both horizontal and vertical piping, with the critical function of preventing sanitary sewer overflows and catastrophic failures. The county requires full compatibility with existing water and wastewater infrastructure, including standard fittings and fill fluids, and compatibility with indoor, outdoor, above-grade, and below-grade installations. This procurement is not open to competitive bids unless a valid challenge is submitted by the deadline, with the county reviewing submissions solely to determine if competition exists before proceeding with a direct award.

Hillsborough County

POSTED

DEADLINE

Temperature Control Unit Manufacturing & SupplyA subcontract has been issued for the manufacture and delivery of a single temperature control unit meeting stringent military specifications, including compliance with DLA standards for packaging, marking, and hazardous material labeling. The unit must be produced and prepared for deployment under exacting defense requirements, ensuring suitability for operational environments and regulatory adherence. The solicitation, posted on July 28, 2026, requires proposals to be submitted by August 5, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Performance is designated for FPO with a zip code of 96667, indicating a military postal address. The North American Industry Classification System code 334513 identifies the scope as manufacturing semiconductor and related electronic components, reflecting the precision and technical nature of the unit required. Subcontractors must be prepared to meet all defense logistics standards without exception.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Digital Display Indicator ManufacturingThe contract calls for the manufacture and assembly of digital display indicators in accordance with military specifications, encompassing full integration of electronic circuits, fabrication of protective housings, and comprehensive final testing to ensure operational reliability under demanding conditions. All work must adhere to stringent defense standards, with quality control measures embedded throughout each phase of production to guarantee compliance and performance in mission-critical environments. This is a small business set-aside subcontract under the SBA’s Total Small Business Set-Aside program, reserved exclusively for certified small businesses as defined by FAR 19.5, with the NAICS code 334513 representing the electromechanical manufacturing sector. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, and is issued by the Department of Defense through the Maritime Supply Chain organization. The place of performance and point of contact details are not specified, but all work must be executed by a qualified small business entity capable of meeting the technical and regulatory demands of military-grade display systems.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

10--DIFFUSER ASSEMBLY

Solicitation # SPE7L126T896P

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for eight diffuser assemblies identified by NSN 1005010299255 under solicitation number SPE7L126T896P. The requirement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, with the NAICS code 332994 indicating the appropriate industry classification. All responses must be submitted electronically via the SAM.gov portal, and hard copies of the solicitation are not available. The solicitation will be accessible online through the provided UI link, and digital drawings along with applicable military specifications and standards can be retrieved or ordered electronically. Deliveries are to be made to DLA Dist San Joaquin with a performance schedule of 359 days after delivery order award. The deadline for submitting quotes is August 10, 2026, and the solicitation was posted on July 30, 2026. Point of contact for questions is listed as DibbsBSM@dla.mil, with additional guidance directing interested parties to check Block 5 of the solicitation document via the Additional Information link or the DIBBS website using the solicitation number. The contracting office is located in Columbus, Ohio, and there is no specified place of performance beyond the delivery destination. Responsibility and timely electronic submission are mandatory for consideration, and all qualified SDVOSBs are encouraged to respond.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

53--SPRING,FLAT

Solicitation # SPE7M226T5909

The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 73 individual units of NSN 5360009198383, a flat spring, to be delivered to Industries of the Blind Inc. under a delivery schedule of 168 days after award. This procurement is conducted via a Request for Quote (RFQ) with a closing date of August 10, 2026, and only electronic submissions are accepted; hard copies are not available. The solicitation is open to all responsible sources, with approved suppliers limited to those with codes 35795 and 38036, and the variation 35795 N38036. No specifications, plans, or drawings are provided, and the NAICS code 332613 applies. The solicitation number is SPE7M26T5909, posted on July 30, 2026, and all responses must be submitted through the designated SAM.gov portal. Primary inquiries should be directed via email to the point of contact listed in the solicitation document, with further details accessible using the global search function on the DIBBS website.

Spring Manufacturing

POSTED

about 19 hours ago

DEADLINE

47--HOSE ASSEMBLY,METAL

Solicitation # SPE7M426T296L

The contract is for the procurement of 14 units of NSN 4720011313115 HOSE ASSEMBLY, METAL, with delivery required to W1A8 DLA DISTRIBUTION within 117 days after award. The solicitation, identified as SPE7M426T296L, was posted on July 30, 2026, and responses must be submitted electronically by August 10, 2026. This is a combined solicitation open to all responsible sources, with no set-aside conditions, and quotes are only accepted through electronic submission. Digitized drawings and applicable military specifications are available electronically and must be referenced during quote preparation. The action is managed by the DLA Land and Maritime office in Columbus, Ohio, under NAICS code 332999, and all inquiries should be directed via email to the designated point of contact. The full solicitation document and supporting materials can be accessed through the provided SAM.gov link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

20--DIAPHRAGM ASSEMBLY,

Solicitation # SPE7M426T294G

The contract solicitation is for the procurement of 2 DIAPHRAGM ASSEMBLY units under NSN 2040014542762, with delivery required to W1A8 DLA DISTRIBUTION within 315 days after award. The approved source for this item is 0EYA6 H73380-01-2, and the solicitation is exclusively available electronically through the provided SAM.gov link, with no hard copies offered and no specifications, plans, or drawings provided. Only responsible sources may submit quotes, and all timely electronic submissions will be considered. The solicitation is a Small Business Set Aside under NAICS code 332510, with the full set-aside designation indicating total reservation for small businesses. The response deadline is August 10, 2026, and the solicitation was posted on July 30, 2026. All inquiries must be directed via email to DibbsBSM@dla.mil, referencing the details in Block 5 of the solicitation document accessible through the Additional Information link on SAM.gov or via the DIBBS portal using solicitation number SPE7M426T294G. The contracting office is located in Columbus, Ohio, and operates under the Department of Defense’s DLA Land and Maritime agency.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

48--VALVE,SOLENOID

Solicitation # SPE7MC26T160G

The contract solicitation is for the procurement of two solenoid valves with NSN 4810010219065, to be delivered to the DLA Distribution Depot in Oklahoma within 373 days of award. Only approved sources—identified by the part numbers 04577 1809001-64, 1DRT7 582R740H02, and 1DRT7 8159-2-000—are eligible to respond. The solicitation, designated SPE7MC26T160G, is issued as a simplified request for quotation with no hard copies available; all submissions must be made electronically through the SAM.gov portal. No technical specifications, plans, or drawings are provided by the government, and any responsible supplier may submit a quote provided it is received before the deadline. The quotation window opens on July 30, 2026, and closes on August 10, 2026. The contracting activity falls under the Department of Defense, specifically DLA Land and Maritime, with the office located in Columbus, Ohio. All inquiries must be directed via email to the designated point of contact, with further details accessible through the solicitation’s official link on DIBBS.

Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

25--CONTROL BOX,ELECTRICAL

Solicitation # SPE7L426T5899

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for six Electrical Control Boxes with NSN 2540013947958 under solicitation number SPE7L426T5899, classified as a Small Business Set Aside with a total set-aside designation. The procurement is conducted via a Request for Quote that must be submitted electronically; no hard copies are available, and no specifications, plans, or drawings are provided. The contract requires delivery to DLA Distribution Red River within 248 calendar days after award, with an approved source identified as 12361 2-195-6-00661. Only responsible sources are eligible to respond, and all timely electronic submissions will be considered. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code is 336390, and the contracting office is located in Columbus, Ohio. All questions must be directed via email to the designated point of contact, with additional information accessible through the provided SAM.gov link or DIBBS portal using the solicitation number.

Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

30--HOUSING,MECHANICAL

Solicitation # SPE7L126T901M

The contract is for the procurement of 3 mechanical housings with NSN 3040016976823, to be delivered to W1A8 DLA DIST SAN JOAQUIN within 262 days after award. The only approved source for this item is 1KQ62 with part number 251-5750199-113. The solicitation, identified as SPE7L126T901M, is issued as a Request for Quote and is accessible only electronically through the provided link; no hard copies are available and no specifications, plans, or drawings are provided. All responsible sources may submit quotes electronically, and timely submissions will be considered without regard to set-aside status. The NAICS code is 333613 and the contracting activity is under the DLA Land and Maritime office based in Columbus, Ohio. The response deadline is August 10, 2026, and all inquiries must be directed via email to the point of contact listed, with additional information accessible through the SAM. gov portal using the solicitation number.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

43--HEAD,HYDRAULIC MOTO

Solicitation # SPE7M426T293G

The procurement is for 10 units of HEAD,HYDRAULIC MOTO with NSN 4320009802915, to be delivered to the DLA Distribution Depot Hill by 356 days after award. The solicitation, identified as SPE7M426T293G, is an RFQ issued by the DLA Land and Maritime office in Columbus, Ohio, under NAICS code 333914. Only approved sources, specifically identified as 62983 921943 and 62983 DS-921943, are eligible to respond. All responsible sources may submit quotes electronically; hard copies are not available, and no specifications, plans, or drawings are provided. Quotes must be received by the response deadline of August 10, 2026, and inquiries should be directed to the specified point of contact via email, as no additional documentation is accessible beyond the solicitation link on SAM.gov.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

59--CONNECTOR BODY,RECE

Solicitation # SPE7M126U4859

The contract solicitation seeks quotes for 4 units of NSN 5935015785782 CONNECTOR BODY, RECE, with an estimated annual order volume of one and a guaranteed minimum quantity of one. The solicitation may lead to an Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, whichever comes first. Deliveries will be made to various DLA depots across CONUS and OCONUS via consolidation and containerization points. Only the approved source 64678 A06-69739-000 is eligible, and the solicitation is a Small Business Set Aside under NAICS code 334417. All responsible sources may submit electronic quotes, with no hard copies available and no specifications, plans, or drawings provided. Quotes must be submitted electronically by the deadline of August 14, 2026, and the solicitation document can only be accessed online through the SAM.gov link provided. Questions should be directed to the designated point of contact via email.

Electronic Connector Manufacturing

POSTED

about 19 hours ago

DEADLINE

25--HUB,WHEEL,VEHICULAR

Solicitation # SPE7M126U4860

The solicitation seeks quotes for 30 wheel hubs, NSN 2530012645683, under an RFQ that may lead to an indefinite delivery contract with a one-year term or until $350,000 in orders is reached, whichever comes first. The guaranteed minimum quantity is four units, with an estimated one order per year, and deliveries will be made to various DLA depots across CONUS and OCONUS via consolidated and containerized shipping points. Only the approved source, 56529 99278-414, is authorized, and no specifications, plans, or drawings are available. All responsible sources may submit electronically generated quotes by the deadline, with hard copies not permitted. The solicitation, identified as SPE7M126U4860, was posted on July 30, 2026, with responses due by August 14, 2026, and is administered by the DLA Land and Maritime office in Columbus, Ohio, under NAICS code 336330. Questions must be directed via email to the designated point of contact listed in the solicitation document.

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L526T4695

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 157 units of NSN 5307015471870, a plain stud, with delivery required to W1A8 DLA DISTRIBUTION within 166 days after award. The solicitation is issued as an RFQ under number SPE7L526T4695, with a response deadline of August 7, 2026, and is exclusively available electronically via the provided SAM.gov link; no hard copies or technical documentation such as specifications, plans, or drawings are provided. The approved source for this item is 7PZX0 26001002674, and all responsible suppliers may respond, but quotes must be submitted electronically and received before the deadline to be considered. The North American Industry Classification System code is 332322, and no set-aside designation applies. The contracting office is located in Columbus, Ohio, and all inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the DIBBS solicitation portal using the assigned solicitation number.

Sheet Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE

29--HTD,DRIVE ASSEMBLY

Solicitation # SPE7M426U0417

The solicitation seeks quotations for 118 Drive Assembly units with NSN 2990016029022 under a potential Automated IDC that will last one year or until aggregate orders reach $350,000, with an estimated two orders annually and a guaranteed minimum of 17 units. All items must be shipped to DLA depots across CONUS and OCONUS locations via consolidated and containerized points, and the only approved source is 6G9R7 PTH KIT7. This is an RFQ issued by the DLA Land and Maritime office in Columbus, Ohio, with no hard copies available; all submissions must be made electronically through the SAM.gov portal by the deadline of August 14, 2026. No specifications, plans, or drawings are provided, and any responsible source may submit a quote if received on time. The point of contact for inquiries is listed via email, and further details can be accessed using the solicitation number SPE7M426U0417 on the DIBBS website.

Other Engine Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE