Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

61--CONTROLLER,LOGIC, IN REPAIR/MODIFICATION OF

Active
N0010426QYAD8Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

N/A

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts
TAYLOR WEIDMAN

Full Description

Show more
NSN 7H-6110-005251190-GL, TDP VER 002, QTY 4 EA, DELIVER TO SW3117, DLA DISTRIBUTION NORFOLK VA, NORFOLK, VA 23511-0001, INDUCTION NIIN IS 7H, 6110, 005251190, GL, CONTROLLER,LOGIC, SYMZ70046-20. NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg intends to solicit on a sole source basis with GE AVIATION SYSTEMS LLC. (CAGE: 05624) for the repair of Items Below: NOMENCLATURE NIIN PART NUMBER WEAPON SYS CONTROLLER,LOGIC 005251190 SYMZ70046-20 SUB ATMOSPHERE CONTROL There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing repair support of the above repair part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 335312 PSC: 6110 Contract Duration will be 1 year. UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 6 AUGUST 2026 with an approximate response/closing date of 4 SEPTEMBER 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 21 SEPTEMBER 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Taylor Weidman taylor.m.weidman2.civ@us.navy.mil.

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 336390
New
Federal
ROD,TIEThis contract specifies the procurement of a tie rod designated as SPECIAL EMPHASIS material (Level I) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the ship itself. All materials must comply with NAVSEA drawing 566-6985426 and conform to ASTM-A193 Grade B7, with stringent requirements for quantitative chemical and mechanical analysis, non-destructive testing via liquid penetrant or magnetic particle inspection, and full traceability from raw material through final assembly. Certification data must be submitted via WAWF to Portsmouth Naval Shipyard (DODAAC N50286) for review and prior acceptance before any shipment, with electronic submissions required for all quality evidence including test reports, weld qualifications, and compliance certificates. Electronic signatures are accepted as legally binding, provided they are uniquely controlled and auditable, and certification statements must be unqualified and positive without disclaimers. The contractor must maintain a quality system per ISO-9001 with calibration controls in accordance with ISO-10012 or ANSI-Z540.3 and is subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All manufacturing, machining, welding, and subcontracting activities must adhere to specified Navy standards such as S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, with welding procedures and qualifications submitted for approval prior to implementation. Traceability is mandatory throughout the supply chain, requiring permanent marking of all components with heat-lot identifiers linked to certified test reports, and strict segregation of traceable materials to prevent commingling. Any changes or deviations require formal waiver requests approved by the Contracting Officer and documented in ECDS. Material must be mercury-free, properly packaged per MIL-STD-2073, and submitted with complete documentation including 100% verification of certification data, markings, and acceptance records; delivery is capped at 365 days after contract effective date, and the order is classified as a "DO" rated priority under the Defense Priorities and Allocations System for national defense use.
Other Motor Vehicle Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
70--DISPLAY CONSOLE, IN REPAIR/MODIFICATION OFThis contract under solicitation N0010424QNB55 is a Firm Fixed Price (FFP) procurement issued by NAVSUP Weapon Systems Support Mechanicstown, aimed at securing qualified contractors to repair, evaluate, and modify DISPLAY CONSOLE units for U.S. Navy use. The scope strictly excludes remanufactured, surplus, or newly procured items; only repairs to existing assets in F-condition are eligible, with offers required to include detailed repair pricing structured as either Firm Fixed or Estimated. Estimated pricing proposals must be followed by a Firm Fixed Price submission within 30 days. The repair turnaround time (RTAT) is contractually defined as 76 days, measured from the physical receipt of the asset at the contractor’s facility, as logged in the Commercial Asset Visibility (CAV) system, to final Government acceptance. Contractors must quote not-to-exceed prices for Test and Evaluation if a unit is beyond repair and provide new item cost comparisons for pricing transparency. The work must adhere to the manufacturer’s technical orders, drawings, and approved repair standards, with all repairs performed to meet the operational and functional specifications tied to CAGE 04JN4 and Reference Number FHC0063729. All repaired items must be marked per MIL-STD-130, Rev N, and packaging must comply with MIL-STD-2073-1, with separate requirements for domestic (ASTM D3951) versus overseas shipments, including precise Level A or B packaging standards based on transportation method. Unique Item Identification (UII) in Data Matrix format per ISO/IEC 16022 is mandatory, along with DLR labeling for depot-repairable items. The contract imposes stringent quality assurance obligations, requiring the contractor to perform all inspections and testing as specified by the original manufacturer and integrate these into their internal quality system. The Government retains the right to inspect at any point and does not accept defective items under sampling allowances. Records must be maintained for 365 days after final delivery. Compliance with cybersecurity requirements is enforced under NIST SP 800-171 and 252.204-7021, mandating full implementation to protect Controlled Unclassified Information (CUI) and reporting cyber incidents to DoD within 72 hours. Subcontractors must inherit these obligations, particularly for operational support roles. Pricing and performance are evaluated through a trade-off process prioritizing past performance over cost
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332919
New
Federal
48--VALVE,CHECKThe Government is seeking to procure a single unit of a check valve, NSN 3H-4820-011081854-L1, under a sole-source contract authority as outlined in FAR 6.302-1, due to the inability to acquire the necessary technical data or rights for repair from alternative sources. It has been determined that obtaining the data or rights is uneconomical and that reverse engineering the part is also not feasible, leaving only the current source capable of fulfilling the requirement. The delivery terms are FOB origin, and the contract action is not a competitive solicitation, though responsible parties are invited to submit capability statements within 45 days of the notice, or 30 days if awarded under an existing Basic Ordering Agreement. Any submissions will be considered solely to evaluate the potential for competition, but the Government retains full discretion to proceed as a sole-source award. The requirement is managed by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, under solicitation number N0010426QZA58, with responses due by August 24, 2026. The contracting officer, Madison Gray, can be contacted for inquiries. Although the acquisition does not utilize FAR Part 12 commercial item procedures, interested parties may still indicate within 15 days whether they can satisfy the requirement using a commercial item, which may influence future procurement strategy. The Government is not committing to any course of action at this stage and is gathering information only to assess potential alternatives.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
ACTUATOR,HYDRAULIC-This contract pertains to the refurbishment of the ACTUATOR, HYDRAULIC- under solicitation N0010426QZB55, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The work requires complete restoration of the actuator to meet Drawing 15095-41525 and Military Specification 5640-081-351 Revision CHG-10, with all refurbished components adhering to MIL-STD-130 marking standards and strict configuration control. Offerors must submit a Firm-Fixed Price quote within 90 days of receiving the carcass, including teardown and evaluation costs, repair turnaround time, throughput constraints, and induction expiration dates. All pricing must account for full repair effort including handling of damaged, incomplete, or worn units and Commercial Asset Visibility reporting. The contract mandates a 300-day repair turnaround time, with penalties applied for noncompliance, and requires final Government inspection and acceptance before payment. The contract incorporates numerous governing clauses including mandatory use of Wide Area Workflow for payment and receiving reports, Buy American Act compliance, and a one-year warranty from delivery date. Contractors not the original equipment manufacturer must provide written authorization from the OEM and disclose packaging facilities if different from their address. All waivers or deviations must be submitted through the Electronic Contractor Data Submission system and classified as Critical, Major, or Minor, with full documentation provided. Configuration changes require a formal Engineering Change Proposal detailing impacts on logistics, operations, and lifecycle costs. The material must be mercury-free, packaged per MIL-STD-2073, and delivered with full traceability. The solicitation is issued under Emergency Acquisition Flexibilities, is DO-certified under DPAS, and will utilize Commercial Asset Visibility. Responses are due by July 20, 2026, and the resulting contract will require bilateral acceptance prior to execution, with all documents deemed issued upon electronic transmission.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335311
New
Federal
CABLE ASSEMBLY,SPECThis contract pertains to the procurement of a specialized cable assembly designated as Special Emphasis Material (Level I) for use in critical shipboard systems where failure could lead to catastrophic outcomes, including loss of life or vessel. The cable must be manufactured strictly in accordance with NAVSEA drawing S-5343934-2 and associated specifications, with mandatory compliance to MIL-DTL-24231 and Navy-specific standards such as SS800-AG-MAN-010/P-9290 for toxicity and flammability. All components must be traceable from raw material to final assembly using permanent markings and documented Objective Quality Evidence, with 100% inspection of certification records and acceptance based on zero defect criteria. The contract enforces stringent quality assurance protocols, requiring ISO-9001 compliance with supplementary calibration standards, and permits only approved vendors for critical processes like connector plating and cable molding. First Article Testing is mandated for one complete assembly, covering dielectric, hydrostatic, and insulation tests under precise tolerances, with all test data required to be unqualified and verifiable. Delivery is governed by a strict timeline, with certification documentation due 20 days prior to shipment and final delivery scheduled 400 days from award. All documentation must be submitted through the Wide Area WorkFlow system to Portsmouth Naval Shipyard, with inspection and acceptance authority vested in N39040. The contract prohibits mercury contamination, mandates complete configuration control, and requires formal Engineering Change Proposals for any modifications affecting form, fit, or function. Waivers and deviations must be classified and approved by the Contracting Officer, with detailed justification and remediation plans. The solicitation is a total small business set-aside, requiring compliance with Buy American and subcontracting plan obligations, and all contractors must utilize the ECDS system for submissions, audits, and communication. Failure to meet traceability, certification, or testing standards results in immediate rejection, and records must be retained for a minimum of seven years. Government Quality Assurance personnel will conduct source inspections, and all subcontractors are subject to the same inspection requirements as the prime contractor.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
48--VALVE, HULL/BACKUPThis contract pertains to the procurement of a 2-inch combination hull and backup ball valve designated as SPECIAL EMPHASIS material (Level I, Scope of Certification) due to its critical role in shipboard systems, where failure could result in serious injury, loss of life, or vessel loss. The valve must strictly comply with Naval Sea Systems Command drawings 6408529, 4385050, and 4384678, with detailed specifications governing material composition, manufacturing processes, and inspection protocols. Key materials include ASTM-B369, QQ-N-286, SAE-AMS-6931, and specialized urethane seats produced exclusively by Mearthane Products Inc., all subject to exacting chemical and mechanical certification requirements. The valve requires oxygen cleaning per MIL-STD-1330, radiography for critical components, and comprehensive nondestructive testing including liquid penetrant, ultrasonic, and dye penetrant inspections with certified procedures and acceptance criteria tied to specific military and industry standards. The contractor must maintain traceability from raw material to final assembly, with permanent identification marks on all components and full documentation linking each part to its material certifications, heat lot numbers, and test results. Quality systems must comply with ISO-9001 or MIL-I-45208, with calibration standards aligned to ISO-10012 or ANSI-Z540.3. All welds and brazing require prior approval, documented procedures, and submission of qualification data, with restrictions on repair and material alternatives. The valve must be mercury-free, use approved lubricants only, and bear the CID 887306381Y identification. A qualified security clearance of Confidential or higher is mandatory due to classified attachments, and the contract imposes strict limitations on deviations, waivers, and subcontractor oversight. Delivery must adhere to FOB destination terms, and payment follows standardized receiving reports. The solicitation, issued under Emergency Acquisition Flexibilities, is a total small business set-aside with a response deadline of August 15, 2026, and is administered by NAVSUP WSS Mechanicsburg, with Heather R. Jones as the primary point of contact.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 22 days
View Details