Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

61--METER,MOISTURE

Awarded

SPE7M126U3162Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is an indefinite delivery vehicle with an estimated quantity of 20,000 units and a ceiling value of $350,000.00, allowing for flexibility in ordering over the contract period. The item in question is a 61-meter moisture-related product, categorized under NAICS code 333912 which corresponds to other industrial machinery manufacturing. The contract was awarded under solicitation number SPE7M126U3162, posted on June 23, 2026, and is managed by the DLA Land and Maritime office within the Department of Defense. The performing office is located in Columbus, Ohio, with the primary point of contact being Desmond Forshey, reachable via email at Desmond.Forshey@dla.mil or by phone at 614-692-6154. No specific place of performance has been designated, and there is no set-aside classification applied to this award. The full details and application can be accessed through the SAM.gov portal using the provided UI link.

General Info

Indefinite delivery contract for 20,000 moisture-related units up to $350,000, awarded by DLA Land and Maritime.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

Contract Value

$350,000

NAICS

333912 - Air and Gas Compressor ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Awardee

TX TECHNOLOGY LLCView Profile

Award Issued Date

06/23/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 14

Combined Synopsis

AwardedJun 23

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Desmond Forshey

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Indefinite Delivery Contract: Estimated quantity 20.000 ; Not to Exceed 350,000.00

Similar Contracts

Same NAICS industry code

43--AIR CLEANER,INTAKE

Solicitation # SPE7M1-26-T-348A

Solicitation SPE7M1-26-T-348A is a request for quotations issued by DLA Land and Maritime for the procurement of four intake air cleaners (NSN 4310011520937) for use in mobile electric power plants. This is a total small business set-aside under NAICS 333912, with quotes due by September 21, 2026. The contract is a fixed-price agreement with delivery required within 153 days, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Technical specifications require adherence to drawing 328A5212 D2 CL R REV, noting the material color is now black and that manufacturer specified application directions should be used in place of the cancelled MIL-C-22751 standard. Eligible offerors must have an approved JCP certification to access export-controlled data and must not use additive manufacturing processes unless specifically authorized. Packaging must comply with ASTM D3951 and MIL-STD-129, while item identification must follow MIL-STD-130. The government will perform inspection and acceptance at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. All quotes must be submitted electronically through the DIBBS system.

MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Piston Ring Set Supply

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Cylinder Sleeves (NSN 4310013677604)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Liner (NSN 4310-01-061-2858)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of NSN 4310-01-560-8839

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Intake Air Cleaner Filter Elements (NSN 4310-01-269-7299)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Rotary Vacuum Pump Unit Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CRANKSHAFT, COMPRESSOR

Solicitation # SPE7M4-26-T-387P

This contract, identified as solicitation SPE7M4-26-T-387P, is issued by the Department of Defense Fluid Handling Division for the procurement of one compressor crankshaft, NSN 4310015608839. The item is designated as a critical application item and may require specific casting or forging processes and tooling. The procurement is a total small business set-aside under NAICS code 333912, with a required delivery date of January 31, 2028, and a delivery window of 168 days. The contract mandates strict adherence to DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking. It includes specific environmental and security constraints, such as the prohibition of intentionally added mercury and the requirement for a CMMC Level 2 self-assessment. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Puget Sound in Bremerton, Washington. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates covered defense information protections.

FLUID HANDLING DIVISION

POSTED

DEADLINE

FITTING, DUCT, AIRCRA

Solicitation # SPE7M1-26-T-333Z

This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-333Z, is for the procurement of seven aircraft duct fittings, identified by NSN 4310-01-526-3966. The contract requires delivery within 166 days after receipt of the order, with performance located in Jacksonville, Florida. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Third-Party Assessment Organization and adherence to DLA packaging and quality standards. The contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, the provider must maintain an approved US/Canada Joint Certification Program certification and complete specific DOD export-controlled technical data training.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-337V

Solicitation SPE7M1-26-T-337V is a request for quotations issued by the DLA Land and Maritime Maritime Supply Chain for the procurement of 47 piston rings, identified by NSN 4310-00-967-4820, for use on Worthington Corp. air compressors. The procurement is categorized under NAICS code 333912 and requires delivery within 168 days, with an original required delivery date of November 15, 2026, and a need ship date of March 9, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E for preservation, and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity standards under DFARS 252.204-7012. All quotes must be submitted via the DIBBS portal by September 21, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CONNECTING ROD, PISTON

Solicitation # SPE7M1-26-T-340H

Solicitation SPE7M1-26-T-340H is a Total Small Business Set-Aside issued by DLA Land and Maritime for the procurement of 22 piston connecting rods, identified by NSN 4310-01-367-7607 and Rix Industries part number A7-C2040. This is a critical application item that may require specific casting or forging tooling. The required delivery date is January 28, 2027, with a need ship date of October 10, 2026. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Key regulatory compliance includes the Buy American and Balance of Payments Program, DFARS 252.204-7012 for cybersecurity, and a prohibition on the intentional addition of mercury. Quotes must be submitted via the DIBBS system, and payment will be processed through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-338C

Solicitation SPE7M1-26-T-338C is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 142 piston rings, identified by NSN 4310-00-878-6167. This item is designated as a critical application item used on General Dynamics Model F-16 aircraft. The procurement is managed under NAICS code 333912, with a required ship date of March 26, 2026, and an original required delivery date of April 28, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specific packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking. Palletization must comply with RP001 requirements. Offerors must submit quotes through the DIBBS system and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

SEAL ASSEMBLY KIT

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supplier/Dealer of Steering Tie Rod Ends

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Manufacturer of Steering Tie Rod Ends

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

DEADLINE

Supply of Insulating Compound Electrical (NSN 5970-002957658)

Nitrogenous Fertilizer Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M126U6073

DLA Land and Maritime is soliciting quotes for the procurement of 3,398 seals under NSN 5330014964243. This requirement may result in an Automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 509 units, with an estimated two orders per year. Delivery is required within 97 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 5F573 233109509643891. This is an electronic RFQ under NAICS code 339991, and all quotes must be submitted electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available. Interested parties should coordinate through the DLA Land and Maritime office in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

53--PACKING WITH RETAINER

Solicitation # SPE7LX26U002A

This procurement request from DLA Land and Maritime is for NSN 5330001438722 Packing with Retainer under solicitation SPE7LX26U002A. The requirement consists of an initial quantity of 76 units with a delivery window of 97 days after receipt of order. This is a source controlled drawing item, and the items must strictly adhere to the cited drawings and military specifications. Approved sources are limited to CAGE codes 07060 and 99193. The solicitation may result in an Indefinite Delivery Contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. There is a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Shipping will be directed to various CONUS and OCONUS DLA Depots. This opportunity is a total set-aside for small businesses under NAICS code 339991, and all quotes must be submitted electronically by September 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

61--CABLE,POWER,ELECTRICAL

Solicitation # SPE7M226U0467

This procurement solicitation, issued by DLA Land and Maritime, is for the supply of electrical power cables under NSN 6145012035390. The requirement consists of an initial quantity of 572 feet, with a delivery window of 80 days after the order is received. This is a qualified products list item and is designated as a total small business set-aside under NAICS code 331318. The solicitation may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. While the estimated number of orders per year is two, the contract includes a guaranteed minimum quantity of 85 units. Shipments will be directed to various CONUS and OCONUS DLA depots. All quotes must be submitted electronically by the deadline of September 24, 2026.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

59--CUSHION,EAR

Solicitation # SPE7M126U6067

DLA Land and Maritime is soliciting quotes for the procurement of ear cushions under NSN 5965014857173. This is a total small business set-aside under NAICS code 334310, with an initial requirement of 279 units to be delivered within 83 days after the order is placed. The procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 41 units and an estimated two orders per year, with shipments destined for various CONUS and OCONUS DLA depots. Approved sources for this requirement are identified as 1PNR4 40243G-02 and 1PNR4 40243G-07. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation, specifications, or drawings are available, and all submissions must be handled through the electronic portal.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

53--TRACK,SLIDING DOOR

Solicitation # SPE7L126U0721

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of sliding door tracks under NSN 5340015973964. This requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The initial request is for 43 units with a delivery window of 133 days after the order is placed. Items are to be shipped to various CONUS and OCONUS DLA Depots. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until a total value of 350,000.00 is reached. The contract anticipates approximately two orders per year with a guaranteed minimum quantity of six units. All quotes must be submitted electronically by the deadline of September 24, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

53--SPRING,HELICAL,COMPRES

Solicitation # SPE7L126U0720

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of helical compression springs under NSN 5360013853389. This request for quotation may result in an Automated Indefinite Delivery Contract with a term of one year or until a total expenditure of 350,000.00 is reached. The contract specifies a guaranteed minimum quantity of one unit, with an estimated one order per year. Delivery is required within 104 days after the order date to various CONUS and OCONUS DLA Depots. Approved sources for this procurement include 07309 112129029 and 07309 112159005. All responsible sources are invited to submit electronic quotes by the deadline of September 24, 2026. Specifications and drawings are not provided as separate documents, and the solicitation is available exclusively through the electronic link provided in the notice.

Spring Manufacturing

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M126U6071

DLA Land and Maritime is soliciting quotes for the procurement of 75 circuit card assemblies under NSN 5998014971477. This requirement may result in an automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Delivery is required within 160 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 0KPC5 C98327-1. This is an RFQ process where all responsible sources may submit electronic quotes by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically through the specified government channels.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX26U002B

DLA Land and Maritime is soliciting quotes for the procurement of butt hinges under NSN 5340016609476. This request for quote may result in an automated indefinite delivery contract with a one year term or until a total of 350,000.00 is reached. The initial requirement specifies a quantity of 48 units to be delivered within 116 days after the order is placed, with a guaranteed minimum quantity of 7 items. Shipments will be directed to various CONUS and OCONUS DLA depots. This opportunity is designated as a total small business set aside under NAICS code 332510. The approved source is identified as 94222 E6-10-420-50. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the specified electronic channels.

Hardware Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS