61-- Security Port Locks & Seal

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PANWRN-19-P-0000012351_01 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-03. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-07-17 17:00:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Fort Belvoir, VA 22060 The INSCOM - Warren requires the following items, Brand Name or Equal, to the following: LI 001: Padjack SVE(100 Unit Pack) Part number SVE100GV or equivalent • Network Security Blockout Device/Jack Copper Category Type Network Security • Color: Black • Compatible with Copper Connectivity • Depth .85 in • Height .71 in • Width .54 In • Material Polycarbonate, 4, EA; LI 002: Wire Loop Seals(10 Pack) Part number WLS10GV or equivalent • Mechanical seal consists of one wire twisted around multiple wires in order to pass through the container or door to be secured. • A metal, plastic head crimp, traps or irreversibly captures the ends of the wire bundle., 20, EA; LI 003: USB 1 Use Port Lock(5 pack) Part number 1GV-USE or equivalent • Physically blocks access to a USB port, 20, EA; LI 004: USB Port Lock & Wire Seal(5 Pack Set) Part number USB5GV or equivalent • USB Port Lock physically blocks access to unused USB ports. • 2 piece & re-usable • Wire Loop Seal • Orange, 8, EA; LI 005: USB Cable Lock & Wire Set (5 Pack Set) Part number USBCL5GV or equivalent "• Two part lock physically secures the USB cable to the port • One-piece lock is inserted and positioned into the USB port. • Second-piece is a USB cable inserted in the port (over the lock), physically securing the USB port. • Wire loop seal secures the cable to the lock and port., 8, EA; LI 006: DB9 D-SUB Port Lock & Wire Seal(5 Pack Set) Part number D-SUB DB9GV or equivalent • Complies with the IEC 61000-6-2 EMC generic standard immunity for industrial environments.- IEC 60068-2-27 (shock) and 600068-2-6 (vibration) tested.- NEMA TS-2 rated for use in transportation applications. • Offers direct IP, virtual COM port, or paired modes of operation. • Features four DB9 serial ports for the RS-232/422/485 device connections. • Has two RJ-45 ports (one LAN/WAN port; one Ethernet pass through port). • Dual-power option via a terminal strip and locking barrel connector. • IP30 enclosure for DIN rail or panel mounting (adapters included). • Includes easy-to-use configuration and management software. • Built-in Web server for browser-based management. • Boasts high throughput with low latency. Communicate easily with four serial devices via LAN or WAN with the rugged 4-Port Hardened Serial Server from Black Box. • 4-Port Hardened Serial Server with four standard DB9 serial ports for the device connections. • Each serial port is software selectable for RS-232, RS-422, or RS-485 (2- or 4-wire) operation. • Network interface, the serial server has an auto detecting 10BASE-T/100BASE-TX port for a CAT5 connection to your Ethernet network, as well as an Ethernet pass-through port. • Pass-through enables the serial server to also work as an Ethernet switch, (connect a local workstation, a second serial server, or other device to network). • Included panel-mount or DIN rail-mount adapters. • Color: Orange • Laser etched serial number • 2 Pieces • Screws included, 8, EA; LI 007: DB25 S-SUB Port Lock & Wire Seal(5 Pack Set) Part number D-SUB DB25GV or equivalent • 2-piece lock (base and cap) with wire loop seal is designed to protect exposed VGA ports (MS-DB9 for 9 pin) and parallel ports (MS-DB25 for 25 pin). • (1) 2-piece lock (re-usable) with matching unique serial numbers • (2) metal screws (re-usable) • (1) Wire loop seal (one-time use) with a unique serial number; wire length is 5 inches. • Color: Orange, 8, EA; LI 008: DB26 D-SUB Port Lock & Wire Seal(5 Pack Set) Part number D-SUB DB26GV or equivalent • Pin Male Solder Type Straight Adapter Connector • 3 Rows DB26M Or - DB26 • Male Parallel D-Sub connector • Two Piece Plastic Back shells Hoods • Color: - Black or Orange • Laser etched serial number • 2 Pieces • Screws included • Wire Loop Fastener, 8, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, INSCOM - Warren intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. INSCOM - Warren is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at +1 (555) 000-0000 or via email at contact@example.gov. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at +1 (555) 000-0000 or contact@example.gov of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.201-1 Definitions, FAR 52.212-4, Contract Terms and Conditions – Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Representation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-- System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001,Buy American Act and Balance Of Payments Program; 252.223-7004, Drug Free Work Force; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: Price. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling +1 (555) 000-0000, or +1 (555) 000-0000 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (Coontinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. No multiple awards will be made. Quotes received through FedBid will be evaluated and awarded on an “all-or-nothing” basis. IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement is __________ with a small business size standard of ___ employees. AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: +1 (555) 000-0000 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: +1 (555) 000-0000 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. 52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. Combating Trafficking in Persons Warranty Tracking of Serialized Items Notice of Warranty Tracking of Serialized Items This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).).