Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

63--CONTROL UNIT,ALARM

Active
N0010426REB68Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation calls for the manufacture and delivery of twenty control units, alarm, identified by NSN 7H-6350-015258994-X5 and part number 5190-0100-09, to be produced in strict accordance with the IRPOD and technical data package. Delivery is required 360 days after contract award, with shipments directed to two DLA distribution centers: one in New Cumberland, Pennsylvania, and the other in Tracy, California. The solicitation number is N00104-26-R-EB68, and all proposals must be submitted prior to the closing date of September 21, 2026, fully completed and signed. Government source inspection is mandatory, and all technical documentation including drawings and IRPOD must be obtained via the secure logistics website, requiring pre-registration and password access—hard copies will not be mailed. Military and federal specifications, QPLs, and other standards can be sourced from DODSSP or assist-online, with support available via phone for those without internet access. The acquisition is subject to international trade agreements and must be quoted in U.S. dollars and English. This is a sole source procurement under FAR 6.302, but offers will be accepted for 45 days following the synopsis publication date to evaluate potential competition. Market research has determined that commercial item acquisition policies under FAR Part 12 will not apply. All interested parties are encouraged to respond, but the government retains full discretion to proceed without competition.

General Info

Twenty control units delivered in 360 days to two DLA centers under sole source procurement.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 7H-6350-015258994-X5, TDP VER 011, QTY 20 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, DELIVER TO W62G2T, W1A8 DLA DIST SAN JOAQUIN, TRACY, CA 95304-5000. 1.THIS REQUIREMENT IS FOR THE MANUFACTURE OF 20 EA CONTROL UNIT, ALARM, NSN 7H 6350-01-525-8994 X5, P/N 5190-0100-09 IAW THE IRPOD/TDP. THE REQUIRED DELIVERY IS 360 DAYS AFTER THE DATE OF CONTRACT. 2.THE SOLICITATION NUMBER IS N00104-26-R-EB68. TO OBTAIN A COPY OF THE SOLICITATION, CONTACT THE CONTRACT SPECIALIST LISTED BELOW AND PROVIDE YOUR CAGE CODE. SARAH RICE EMAIL: SARAH.E.RICE14.CIV@US.NAVY.MIL PHONE:717-229-3872 3.ALL RESPONSIBLE SOURCES MAY SUBMIT A PROPOSAL WHICH SHALL BE CONSIDERED IF ITIS SUBMITTED WITH THE REQUIREMENTS OF THE SOLICITATION. 4.IN ORDER FOR YOUR OFFER TO BE CONSIDERED, YOU MUST SUBMIT THE ENTIRE RFP COMPLETED AND SIGNED, PRIOR TO THE CLOSING DATE/TIME LISTED ON THE RFP. 6.GOVERNMENT SOURCE INSPECTION IS REQUIRED. 7.TECHNICAL DOCUMENTS ASSOCIATED WITH THIS SOLICITATION, SUCH AS DRAWINGS, INDIVIDUAL REPAIR PART ORDERING DATA (IRPOD), STRS, AND OTHER PROCUREMENT RELATED DOCUMENTS MAY BE OBTAINED AT: HTTPS://LOGISTICS.UNNPP.GOV THIS WEBSITE REQUIRES A PASSWORD AND PRE-REGISTRATION. PLEASE CONTACT THE E-COMMERCE HELP DESK AT 518-395-4357 TO REGISTER OR FOR HELP LOGGING INTO THE WEBSITE. A HARD COPY OF THE IRPOD AND/OR DRAWINGS WILL NOT BE MAILED TOYOU. 8.INTERESTED PARTIES MAY OBTAIN COPIES OF MILITARY AND FEDERAL SPECIFICATIONS AND STANDARDS, QUALIFIED PRODUCTS LISTS (QPLs), QUALIFIED PRODUCT DATABASES (QPDs), MILITARY HANDBOOKS, AND OTHER STANDARDIZED DOCUMENTS FROM THE DOD SINGLE STOCK POINT (DODSSP) AT DOCUMENT AUTOMATION AND PRODUCTION SERVICE (DAPS) IN PHILADELPHIA, PA. NOTE: PATTERN, DRAWINGS, DEVIATION LISTS, PURCHASE DESCRIPTIONS, ETC. ARE NOT STOCKED AT DODSSP. MOST DOCUMENTS ARE AVAILABLE IN ADOBE PDF FORMAT FROM ASSIST-ONLINE AT: HTTP://ASSIST.DLA.MIL/ONLINE/START/ DOCUMENTS NOT AVAILABLE FOR DOWNLOADING FROM ASSIST CAN BE ORDERED FROM DODSSP USING THE ASSIST SHOPPING WIZARD, AFTER ESTABLISHING A DODSSP CUSTOMER ACCOUNT BY FOLLOWING THE REGISTRATION PROCEDURES OR BY PHONING THE DODSSP SPECIAL ASSISTANCE DESK AT 215-737-8000. USERS NOT HAVING ACCESS TO THE INTERNET MAY CONTACT THE DODSSP SPECIAL ASSISTANCE DESK AT215-737-8000. 9.ONE OR MORE OF THE ITEMS UNDER THIS ACQUISITION IS SUBJECT TO THE WORLD TRADE ORGANIZATION GOVERNMENT PROCUREMENT AGREEMENT AND/OR FREE TRADE AGREEMENTS. ALL OFFERS SHALL BE IN THE ENGLISH LANGUAGE AND IN U.S. DOLLARS. ALL INTERESTED SUPPLIERS MAY SUBMIT AN OFFER. 10.THE PROPOSED CONTRACT ACTION IS FOR SUPPLIES OR SERVICES FOR WHICH THE GOVERNMENT INTENDS TO SOLICIT AND NEGOTIATE WITH ONLY ONE SOURCE UNDER THE AUTHORITY OF FAR 6.302. INTERESTED PERSONS MAY IDENTIFY THEIR INTEREST AND CAPABILITY TO RESPOND TO THE REQUIREMENT OR SUBMIT PROPOSALS. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. HOWEVER, ALL PROPOSALS RECEIVED WITHIN FORTY-FIVE DAYS (THIRTY DAYS IF AWARD IS ISSUED UNDER AN EXISTING BASIC ORDERING AGREEMENT) AFTER DATE OF PUBLICATION OF THIS SYNOPSIS WILL BE CONSIDERED BY THE GOVERNMENT. A DETERMINATION BY THE GOVERNMENT NOT TO COMPETE WITH THIS PROPOSED CONTRACT BASED UPON RESPONSES TO THIS NOTICE IS SOLELY WITHIN THE DISCRETION OF THE GOVERNMENT. INFORMATION RECEIVED WILL NORMALLY BE CONSIDERED SOLELY FOR THE PURPOSE OF DETERMINING WHETHER TO CONDUCT A COMPETITIVE PROCUREMENT. 11.BASED UPON MARKET RESEARCH, THE GOVERNMENT IS NOT USING THE POLICIES CONTAINED IN FAR PART 12, ACQUISITION OF COMMERCIAL ITEMS, IN ITS SOLICITATION FOR THE DESCRIBED SUPPLIES OR SERVICES.

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
Federal
59--SWITCH,FLOW
Solicitation # SPE7M826T5887
The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 10 units of NSN 5930016129024 SWITCH,FLOW under solicitation number SPE7M886T5887, with a total small business set aside. Quotes must be submitted electronically by the deadline of August 17, 2026, and only approved sources identified as 04034 151505 and 04034 FS-200-UE-LW-0.50-V-05.50-A-S are eligible for award. The delivery location is DLA Dist San Joaquin, with an anticipated delivery window of 168 days after order award. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided, limiting bidders to the information outlined in the public posting. All responsible sources may respond if quotes are received on time, and submissions must be made through the online portal accessible via the SAM.gov link provided. The procurement is classified under NAICS code 335314 for electric lighting equipment manufacturing, and the contracting office is located in Columbus, Ohio. The primary point of contact for inquiries is the buyer listed in Block 5 of the solicitation document, accessible via the SAM.gov workspace link, with additional guidance directing users to DIBBS for solicitation retrieval if the link fails. The solicitation was posted on August 6, 2026, and is categorized as a combined action under the Small Business Administration’s total set-aside program, prioritizing small business participation. Bidders must ensure electronic compliance and timing precision, as no alternative submission methods or supporting documentation are offered.
DLA Land And Maritime

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
ADAPTER ASSEMBLY CM
Solicitation # N0010426QBC08
The contract pertains to the procurement of an ADAPTER ASSEMBLY CM under solicitation N0010426QBC06, with a closing date extended to June 18, 2026, and pricing valid for 60 days after submission unless otherwise specified. All technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD), which dictates the order of precedence for conflicting documents, with contract amendments and schedules taking priority over drawings, specifications, and standards. Contractors must comply strictly with the revision levels cited in the IRPOD and may not mix revisions without written approval from the contracting officer. The IRPOD is mandatory and accessible via the BPMI e-Commerce portal, requiring pre-registration and password authentication; vendor review of the IRPOD is compulsory. Technical documentation is marked NOFORN and subject to export controls, with distribution restricted to U.S. entities unless prior approval is obtained from Naval Sea Systems Command. Packaging must adhere to MIL-PRF-23199 and MIL-STD-2073 where applicable, with green poly bags permitted only when cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar standards are invoked, and fire-retardant materials are no longer required. Mercury or mercury-containing compounds are prohibited from direct contact with supplied hardware. Quality assurance responsibilities are defined entirely within the IRPOD, requiring contractors to maintain complete inspection records available to the government throughout performance and beyond. Pre-manufacturing submissions, including procedures and drawings, must be submitted within 45 days after contract award and certified according to DI-QCIC-8871, while post-production test and inspection reports must be submitted at contract end per DI-QCIC-8872, both in separate packages keyed to each unique contract line item. All contractual documents are deemed issued upon electronic transmission or mail delivery, and submissions must follow WAWF or alternative electronic means. Pricing must be clearly stated with validity period, and deviations or delays require formal justification including technical evaluation of impact on form, fit, function, and quality, reviewed by the Government Quality Assurance Representative before forwarding to the post-award contracting officer. Compliance with cybersecurity maturity certification, small business set-aside, priority rating for national defense, and security prohibitions under recent deviations is mandatory.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QZB70
This contract pertains to the procurement of a Compartment Salvage Ball Valve for critical shipboard use, designated as SPECIAL EMPHASIS Level I material due to its direct impact on vessel safety, where failure could result in catastrophic loss of life or ship. The valve and its components must strictly conform to specific Navy drawings including 4558705, 4558706, and others, with precise material requirements for parts such as the body, tube, ball, stems, studs, nuts, and seats, each governed by military and industry standards like QQ-N-281, MIL-T-16420, ASTM-B150, SAE AMS 6931, and MD71-GG Mearthane. All materials require traceable certification, with chemical and mechanical tests verified through Objective Quality Evidence, and mandatory certifications including Liquid Penetrant, Ultrasonic, and Dye Penetrant Inspections as specified. Material traceability is enforced from raw stock to finished component via permanent, legible markings meeting MIL-STD-792, with strict controls to prevent commingling and ensure documentation integrity. Non-metallic components such as elastomeric seats must meet exact hardness, tensile, and absorption properties per ASTM standards and be sourced exclusively from approved suppliers. All manufacturing and assembly processes must adhere to detailed specifications including welding and brazing requirements under S9074-AQ-GIB-010/248 and 0900-LP-001-7000, with procedure and welder qualification data subject to prior government approval. Thread forming is restricted to cutting, and lubricants containing molybdenum disulfide are prohibited due to seawater degradation risks; instead, Anti-galling compound A-A-59004 is mandated. The Contractor must maintain an ISO-9001-compliant quality system with calibration procedures aligning to ISO-10012 or ANSI-Z540.3, and is subject to Government Quality Assurance at source. Final acceptance requires 100% inspection of certification documents, traceability markings, and non-destructive test results, with zero defect tolerance for lot acceptance. All fasteners must be uniquely marked with material symbol, manufacturer ID, and traceability number, while Teflon coatings and seat dimensions must comply with specific drawing notes and CSD references. The contract mandates full compliance with Buy American provisions, Small Business set-asides
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QDB44
This contract pertains to the repair and modification of a circuit card assembly under a firm-fixed-price arrangement, requiring strict adherence to technical specifications and quality standards mandated by the U.S. Navy. The solicitation mandates a Repair Turnaround Time of 53 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with final government inspection and acceptance essential before completion. All repairs must comply with MIL-STD-130 Rev N for marking and follow the original manufacturer’s technical directives, drawings, and approved repair procedures. The contractor is responsible for all inspections and testing, maintaining complete records for at least 365 days post-delivery, and must not substitute components without prior written approval from the contracting officer, with specific code classifications governing any design or part number changes. The contract enforces mandatory compliance with Federal Acquisition Regulation clauses including Buy American, cybersecurity maturity certification, small business subcontracting, and security prohibitions, while also requiring the use of Workflow Pro for payment and invoice processing. Freight is FOB Origin and handled by the Navy under CAV guidelines, with all quotes required to specify unit price, total price, and RTAT, or explain capacity limitations if unable to meet the 53-day requirement. The solicitation applies only to authorized distributors of the original manufacturer, and proof of authorization must be submitted with the offer. All documents and data are subject to distribution restrictions as defined by OPNAVINST 5510.1, and any requests for controlled documents must follow formal government channels. The award will be bilateral, contingent upon the contractor’s written acceptance, and pre-populated subcontract clauses define maximum RTAT, throughput capacity, and induction expiration dates not exceeding 365 days.
Bare Printed Circuit Board Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
Federal
LOWER BEARING ASSY
Solicitation # N0010426QYA7K
This contract is for the manufacture and delivery of the Lower Bearing Assembly #1, a specialized component for use on U.S. Navy submarines, under a 100% small business set-aside solicitation identified as N0010426QYA7K. The requirement demands strict adherence to specific engineering drawings and a comprehensive set of technical standards including MIL-STD-973, MIL-STD-130N, MIL-STD-2035A, ISO 9001, ISO/IEC 17025, and multiple NAVSEA technical publications. The contractor must implement a robust quality inspection system, submit and obtain prior government approval for detailed test plans, welding procedures, nondestructive testing protocols, and first article inspection reports. All production units require 100% dimensional and nondestructive inspection, including visual and liquid penetrant testing of welds, thread inspections to ASME B1.3 systems, and certification of material composition through mill reports. Each component is subject to permanent marking per MIL-STD-130 with traceability by heat, lot, batch, and serial number. The contract requires full documentation of objective quality evidence for all materials and processes, including certified mill data, weld rod certifications, heat treatment records, material compliance certificates, and welder and inspector qualification records. Mercury contamination is strictly prohibited, and any use of mercury or mercury-bearing materials requires explicit written approval from the Procurement Contracting Officer with detailed protective measures and warning labeling. All deliveries must be accompanied by a Mercury Exclusion Certification. The contract uses FOB destination terms, requires electronic submission of invoices and receiving reports through WAWF/IRAPT, and sets a 1-year warranty after delivery with a 45-day defect discovery window. The Naval Surface Warfare Center, Philadelphia Division (NSWCPD), serves as the accepting activity with DODACC N64498 and is responsible for reviewing and approving all contractual data items, technical submissions, and final inspections. The government reserves the right to inspect at any point during manufacturing, and contract compliance is mandatory throughout the supply chain, including subcontractors. The solicitation closes on July 30, 2026, with evaluation based on balanced consideration of price and non-price factors such as delivery lead time and verified past performance.
Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 25 days
View Details
NAICS: 335931
New
Federal
ADAPTER
Solicitation # N0010426QEC52
The contract pertains to the procurement of an ADAPTER under solicitation N0010426QEC52, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, with a NAICS code of 335931. The solicitation mandates strict compliance with technical and quality requirements outlined in the Individual Repair Part Ordering Data (IRPOD), which contractors must review prior to submission, as access is mandatory and requires pre-registration via the BPMI e-Commerce website. Delivery and performance are subject to stringent document control, where the IRPOD, drawings, technical data, and referenced military specifications form the basis of contractual obligations, with a defined order of precedence that prioritizes contract amendments, schedules, and terms in descending order. All technical documentation is marked with distribution restrictions, including NOFORN designations, requiring explicit government approval for any transmission to foreign nationals. Contractors must adhere to specified revision levels of referenced documents and may not mix revisions without written approval, and any deviations or waivers, particularly for critical repair parts, require detailed justification including technical data, impact assessments, and coordination with the Government Quality Assurance Representative. Pricing is valid for 60 days after the closing date, with clear instructions to specify alternative validity periods if applicable. Packaging must conform to MIL-PRF-23199 and other invoked standards, especially where cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar documents apply, allowing only heat-sealed envelopes for components under such controls; the use of fire-retardant packaging is expressly prohibited. The contract includes mandatory compliance with cybersecurity maturity certification, small business set-aside requirements, priority ratings for national defense, and prohibitions against the intentional use of mercury. All contractual documents are deemed issued upon electronic transmission, and acceptance of the proposal constitutes bilateral agreement. Technical data delivery is governed by DD Form 1423 requirements, with specific codes dictating inspection and acceptance authority, submission frequency, deadlines, and data classification, including mandatory submission of a Certificate of Compliance per DI-MISC-81356 with each delivery. Data pricing categories are defined, with most items expected under Group I or II, requiring cost calculations based on direct labor, overhead, G&A, and profit, and no charge may be indicated only where data is commercial in nature and trivial in cost. All submissions must be made through the designated electronic portal, and failure to meet procedural and technical requirements will result in rejection without review
Current-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
59--GPI-MBS CCA
Solicitation # N0010426QEA78
The contract pertains to the procurement of five units of NSN 7H-5998-017261855, identified as 59--GPI-MBS CCA, to be delivered to DLA Distribution Norfolk, Virginia. The Government intends to award this contract on a sole-source basis under FAR 6.302-1 due to the exclusive nature of the part, as the rights to the data required for its purchase or repair are not owned by the Government and cannot be acquired, developed, or obtained through any other means, and reverse engineering is deemed uneconomical. While the notice is not a solicitation for competitive bids, responsible sources may submit statements of capability or proposals within 45 days of the notice, or 30 days if award is made under an existing Basic Ordering Agreement, and all submissions will be evaluated to determine whether competition is feasible. The Government retains full discretion to decide whether to proceed without competition based on responses received. Award depends on the offeror, product, or manufacturer meeting all qualification requirements at time of award, as stipulated by FAR clause 52.209-1, and the solicitation will specify where to obtain further qualification details. Market research has determined that FAR Part 12 commercial item acquisition policies will not apply, but interested parties may still indicate if they can provide a commercial item equivalent within 15 days of the notice. The solicitation is managed by the Naval Supply Systems Command Weapon Systems Support, with primary point of contact Rebecca Aglow in Mechanicsburg, Pennsylvania.
Bare Printed Circuit Board Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
CABLE ASSEMBLY,MAIN
Solicitation # N0010426QQB84
This contract solicits repairs for the CABLE ASSEMBLY,MAIN and POWER SUPPLY under solicitation N0010426QQB84, with a response deadline of July 27, 2026. The Navy requires a Repair Turnaround Time of 90 days, measured from physical receipt of the defective asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with delivery to be FOB Origin. All repairs must conform to manufacturer specifications, MIL-STD-130 marking standards, and approved technical documentation, with no substitutions permitted without prior written approval from the NAVICP-MECH Contracting Officer. The contractor is responsible for all inspection, testing, and quality control activities and must maintain complete records for 365 days after delivery. Government Source Inspection is mandatory, and the Navy handles all freight under the CAV Statement of Work. The contract is a firm-fixed-price arrangement, and failure to meet the 90-day RTAT will result in monthly price reductions per unit, up to a specified maximum, without limiting the Government's right to terminate for default. The solicitation is restricted to authorized distributors of the original manufacturer, requiring proof of authorization to be submitted with the offer. Pricing must be justified, especially if exceeding historical rates or if the item is new to NAVSUP WSS, with supporting documentation such as prior invoices or commercial pricing data required. An option exists to increase the quantity to 28 units within 365 days of order receipt, at the same unit price. Both items are subject to Buy American and cybersecurity maturity certification requirements, and all documents provided by the Government carry distribution restrictions under OPNAVINST 5510.1, including potential NOFORN status. The award will be issued bilaterally upon the contractor’s signed acceptance, and all quotes must include unit price, total price, and RTAT, with separate T&E fees specified if an item is deemed beyond repair. The point of contact is Jacob Davis at N7M2.9 with email JACOB.T.DAVIS18.CIV@US.NAVY.MIL.
Current-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 335312
New
Federal
28--MOTOR ASSY
Solicitation # N0010426QEC86
This contract is for the manufacture of eight motor assemblies, identified by NSN 1H-2895-016280105-PP and part number N0010426X7547, to be produced in full compliance with the IRPOD and technical data package, version 003. The deliveries are due 180 days after contract award and must be shipped to two designated DLA distribution locations: New Cumberland, Pennsylvania, and Tracy, California. The solicitation number is N00104-26-Q-EC86, and all proposals must be submitted fully completed and signed before the response deadline of September 21, 2026. Government source inspection and Reports of Test Inspection are mandatory requirements for acceptance. This acquisition is entirely set aside for small business concerns under FAR clause 52.219-6, and only responsible small business entities are eligible to respond. Technical documents including drawings, IRPOD, and STRS are accessible only through a secured online portal at logistics.unnpp.gov, requiring prior registration and password access, and hard copies will not be mailed. Military and federal specifications and qualified product lists can be obtained via the DOD Single Stock Point or assist-online.gov. The offer must be submitted in English and in U.S. dollars, and the procurement is not conducted under commercial item acquisition policies. The contract is managed by the Naval Supply Systems Command Weapon Systems Support, with Blake V. Barrick as the primary point of contact, and interest is open to all qualified small business suppliers meeting the stated criteria.
Motor and Generator Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 335311
New
Federal
CBL ACTR/LOCK PWR
Solicitation # N0010426QNE12
This contract pertains to the manufacture and quality assurance of the CBL ACTR/LOCK PWR component, governed by specific engineering drawings and technical standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and NAVSEA S9320-AM-PRO-020/MLDG for manufacturing certification. The item is intended for use on submarines or surface ships, mandating strict mercury-free requirements to prevent contamination of sensitive systems, with any proposed use of mercury requiring prior written approval and detailed safety protocols. Suppliers must maintain an ISO 9001 quality system and are responsible for all inspections, records, and compliance, with government oversight reserved at any stage. Configuration changes, deviations, or waivers must be formally approved and documented through specified channels to NAVICP-MECH in Mechanicsburg, PA. The solicitation, issued under N0010426QNE12 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, is subject to emergency acquisition flexibilities and will be awarded as a rated order under the Defense Priorities and Allocations System. It is a total small business set-aside with mandatory compliance with Buy American Act provisions, Small Business Subcontracting Plans, and cybersecurity maturity certification requirements. All contractual documents are deemed officially issued upon electronic transmission, and award requires bilateral acceptance. Vendors must adhere to stringent packaging standards under MIL-STD-2073, provide certified test reports for each assembly, and ensure subcontractors meet all terms. Proposals are due by September 8, 2026, and technical inquiries must be directed to the designated point of contact, James E. Lewis, via official email.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
NUT,HEX,SELF-LOCKIN
Solicitation # N0010426QFE05
This contract mandates the supply of self-locking heavy hex nuts designated as Special Emphasis Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to MIL-DTL-32258 with specific chemical and mechanical requirements tied to QQ-N-281 Class A or B, and the self-locking element must comply with ASTM-D6456 or ASTM-D4066 depending on temperature rating. Traceability is strictly enforced through unique heat-lot markings on each component and mandatory certification documentation that must directly link to the physical item, with no transcription permitted. All certifications must include full compliance statements signed by authorized personnel, with disclaimers strictly prohibited. Quality assurance systems must comply with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative including MIL-I-45208 and MIL-STD-45662, subject to government audit at source. First Article Testing requirements are satisfied through prior qualification data or letters from qualified sources, and all material must undergo 100% inspection for traceability marking, certification completeness, and nondestructive testing results. Delivery is governed by a strict schedule requiring certification data submission 20 days prior to shipment and formal acceptance by Portsmouth Naval Shipyard via the WAWF system before any material may be shipped. Final delivery must occur no later than 365 days after contract award, with the order rated DO for national defense priorities. Materials must be mercury-free, marked in accordance with MIL-STD-792, and all internal threads must be cut, not cold-formed. Subcontractor oversight, material handling procedures, and re-certification after processing are tightly controlled, and any deviation or waiver requires prior written approval from the Contracting Officer. All documentation must be submitted electronically through ECDS and WAWF, with notifications sent to designated Navy email addresses, and compliance is monitored under emergency acquisition flexibilities.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
Federal
CLOTH,FIBERGLASS
Solicitation # N0010426QED21
The contract pertains to the procurement of fiberglass cloth under solicitation N0010426QED21, issued by the Naval Supply Systems Command Weapon Systems Support, Mechanical, located in Mechanicsburg, Pennsylvania. Pricing is valid for 60 days after the closing date, with submission required via email or NECO specifying the validity period if different. All contractual documents are deemed issued upon electronic transmission, and acceptance of the proposal constitutes bilateral agreement. The scope prioritizes Section C over Section D in case of conflict, and compliance is mandatory with all referenced technical documents obtained via the BPMI e-Commerce site, which requires pre-registration and password access. The Individual Repair Part Ordering Data (IRPOD) is central to defining requirements and must be thoroughly reviewed by the vendor. Applicable documents include MIL-I-45208 for quality requirements, MIL-PRF-23199 for packaging with specific clarifications on cleanliness controls and poly bag usage, and MIL-STD-2073 for general packaging, with fire-retardant materials no longer required. Technical data packages must be submitted per DD Form 1423 instructions, with clear delineation of deliverables and inspection codes. All technical documentation is marked NOFORN, requiring strict control and prior approval for any foreign dissemination. Quality assurance is governed by the IRPOD, requiring the contractor to establish and maintain an inspection system acceptable to the government, with all inspection records retained throughout contract performance and beyond. The contractor must comply with specified revisions of drawings and specifications cited in the IRPOD and may not mix revisions unless approved in writing by the contracting officer. Deviations or waiver requests must include detailed justification, technical data supporting functional equivalence, and must be submitted through the Government Quality Assurance Representative within five working days. Mercury and mercury-containing compounds are strictly prohibited. All deliveries must meet the delivery schedule, with authorization to ship requiring prior PCO approval. Test reports under MIL-DTL-24244 must be submitted in two formats: a comprehensive package to the PCO within 45 days after award, and one copy attached to each delivered item. The contract mandates full compliance with small business program representations, veteran and disability equal opportunity policies, cybersecurity maturity model certification, priority rating for national defense, and security prohibitions as outlined in applicable federal deviations. The place of performance and delivery location is undefined, with payment governed by Wide Area Workflow instructions and invoicing via combined invoice and receiving reports.
All Other Miscellaneous Textile Product Mills

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details