This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

64-inch Printer/Cutter

Awarded

W50S83-26-Q-0007Federal

Submission Closed06/08/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333248

New

DIBBS

Supply of Hub and Pin Assemblies (NSN 6930-01-131-7216)This subcontract involves the manufacture or sourcing of 10 Hub and Pin Assemblies under NSN 6930-01-131-7216 for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider must ensure all assemblies meet strict technical specifications and DLA quality and inspection standards. Additionally, the contractor is responsible for packaging and labeling items in accordance with DFARS 252.223-7001 and coordinating delivery through the First Destination Transportation program. The opportunity is categorized under NAICS code 333248 and requires the contractor to have a CMMC Level 2 Self-Assessment. Interested parties must submit their responses by November 9, 2026, to support the Department of Defense requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Hand-Operated Drum WinchesThis subcontract involves the procurement of 16 hand-operated drum winches to support prime contractors fulfilling Department of Defense supply contracts. The required equipment must strictly adhere to NSN 3950-01-595-4485 and part number DL1602A specifications. Additionally, the supplier is responsible for ensuring full compliance with the DLA Master List of Technical and Quality Requirements and providing all necessary EPA-approved Consumer Information Sheets. The final delivery of the 16 units is designated for DLA Distribution DDSP located in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 333248 and is managed through the Department of Defense. Interested parties must meet the specified technical standards to ensure the equipment is suitable for its intended military supply application.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Borosilicate Microscope Cover Glass SupplyThis subcontract involves the supply of borosilicate microscope slide cover glass to prime contractors supporting the Department of Defense Medical Supply Chain FSH. The required glass must be optically clear, colorless, and non-fogging, measuring 22mm by 22mm with a thickness of number one in accordance with DLA RA001 requirements. The order consists of four packages, each containing ten 1oz containers, which must be packaged and labeled according to MIL-STD-2073-1E and Medical Marking Standard No. 1. Delivery is specified as FOB Destination to Fort Bragg, North Carolina. The procurement falls under NAICS code 333248.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

TEST KIT, LEAD DETERMIN

Solicitation # SPE2DH-27-T-0302

Solicitation SPE2DH-27-T-0302, issued by the DLA Troop Support Medical Supply Chain FSH, is for the procurement of one package of lead determination test kits (NSN 6640-01-455-9311). Each package must contain 100 ion-specific test strips capable of 100 determinations within a range of 20 to 500 PPM. The items must have a shelf life of 24 months, with a strict requirement that no more than three months have elapsed from the date of manufacture to the date of delivery to the government. Delivery is required within 20 days after receipt of order (ADO) to Eglin AFB, Florida, under FOB Destination terms. The contractor must adhere to rigorous labeling and packaging standards, including Medical Marking Standard No. 1 and MIL-STD-2073-1E. Labels must clearly display the NSN, manufacturer, CAGE code, contract or lot number, and relevant manufacture or expiration dates. Because the items may be classified as hazardous materials, packaging must comply with 49 CFR, ICAO, and IMDG regulations, with certifications provided on the DD Form 250. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity requirements, and destination inspection per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

CUVETTE, BLOOD SAMPLE

Solicitation # SPE2DH-27-T-0314

This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of two boxes of HB 201 microcuvettes (NSN 6640-01-671-4541) for use with the HemoCue HB 201 Plus Analyzer for hemoglobin point-of-care testing. Each box contains 200 units. The items must have a shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Storage requirements are strictly set between 15 to 30 degrees Celsius (59 to 86 degrees Fahrenheit). Delivery is required within 85 days after receipt of order, with the destination point located in Germany and the United States. The contract requires adherence to Medical Marking Standard No. 1, and labels must include the NSN, manufacturer CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. Packaging must be commercial and compliant with MIL-STD-2073-1E. Bidders must specify the source and part number being supplied, and any alternate offers require a complete data package for evaluation. The procurement is subject to various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. Invoicing and payment must be processed through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

WINCH, DRUM, HAND OPERAT

Solicitation # SPE8EE-27-T-0335

Solicitation SPE8EE-27-T-0335, issued by the DLA Troop Support Construction and Equipment Manufacturing and Contracting office, is for the procurement of 16 hand-operated drum winches (NSN 3950-01-595-4485). The contract specifies a delivery period of 167 days after order, with an original required delivery date of March 21, 2027, and a need ship date of April 26, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical and quality requirements take precedence. Each shipment must include an EPA-approved Consumer Information Sheet. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. The assigned NAICS code for this effort is 333248.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0317

Solicitation SPE8EE-27-T-0317 is a request for quotations from the Defense Logistics Agency for the procurement of 122 units of Brake Stop hardware, identified by NSN 3950015491037. The requirement is governed by NAICS code 333248 and specifies a delivery lead time of 167 days after order, with an original required delivery date of February 2, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA Master List requirements and RP001 for palletization. Special technical constraints include the prohibition of intentionally added mercury and the requirement to remove government identification from non-accepted supplies. Administratively, the contract utilizes the Wide Area WorkFlow system for electronic invoicing and incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and safeguarding of covered defense information. Quotations are due by November 9, 2026, and may be submitted via the DIBBS portal.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0334

Solicitation SPE8EE-27-T-0334 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manu and Con, for the procurement of six units of hook hoists under NSN 3950-01-609-4265. The requirement specifies that only new, unused, and non-refurbished material will be accepted. The delivery is required within 167 days after order, with a need ship date of April 26, 2027, and a final required delivery date of April 30, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, where both inspection and acceptance will take place. The contract incorporates strict technical and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must follow RP001 standards, specifically requiring the use of government or wing tip pallets, as non-government cannery pallets are prohibited. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This procurement is not a small business set-aside and requires compliance with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, the prohibition of covered defense telecommunications equipment, and the safeguarding of covered defense information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

CAPTURE FRAME, BRACKET

Solicitation # SPE8EE-27-T-0326

Solicitation SPE8EE-27-T-0326 is a Request for Quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of six capture frame brackets under NSN 3950-01-573-7388. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery schedule of 167 days after order. The procurement is conducted under the First Destination Transportation program with FOB Origin terms. The contract is governed by NAICS code 333248 and includes stringent technical and quality requirements as defined in the DLA Master List, with specific packaging and marking standards including ASTM D3951 and MIL-STD-129. Compliance with the Buy American Act and Berry Amendment is required. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0208

Solicitation SPE8ES-27-T-0208 is a request for quotations from the Defense Logistics Agency for the procurement of one 5-gallon can of mold release agent, identified by NSN 8030-01-233-1265. The requirement specifies a non-extendable shelf life of 12 months and requires storage temperatures between 60 and 80 degrees Fahrenheit. Delivery is required within five days after order, with a required delivery date of October 29, 2026, shipped FOB Destination to locations in Illinois and the US APO AE. The contractor must adhere to strict hazardous materials protocols, including the submission of Safety Data Sheets and labels compliant with 29 CFR 1910.1200 for review prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements under RP001. Inspection and acceptance will occur at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow system. This procurement is subject to various federal regulations, including the Buy American Act, Berry Amendment, and safeguarding requirements for covered defense information. Quotations must be submitted via the DIBBS portal by November 3, 2026.

Defense Logistics Agency

POSTED

DEADLINE

COVER GLASS, MICROSCOPE

Solicitation # SPE2DH-27-T-0307

Solicitation SPE2DH-27-T-0307 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of microscope slide cover glass, identified by NSN 6640-01-718-7221. The requirement is for four packages, with each package containing ten 1oz containers of high-quality, non-fogging, and non-corrosive borosilicate glass. The cover glass must be optically clear, colorless, and exhibit low auto-fluorescence, with dimensions of 22mm x 22mm and a thickness of #1 (0.13mm to 0.17mm). Delivery is required within 20 days after the order is placed, with a destination of Fort Bragg, North Carolina, under FOB Destination terms. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and Medical Marking Standard No. 1 for labeling. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements (RA001). Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and DFARS domestic material restrictions. Inspection and acceptance will occur at the destination per FAR 52.246-2. Quotations must be submitted by November 4, 2026, to the issuing office in Philadelphia, Pennsylvania.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Goo Grinder Overhead Reservoir Metering SystemThis subcontract opportunity is for the provision of Goo Grinder Overhead Reservoir Metering Systems to support prime contractors on W6QM Micc-Ft Drum industrial equipment projects for the Department of Defense. The required systems must be manufactured using gear pumps and chain drives capable of metering non-abrasive materials with viscosities ranging from 300 to 50,000 cps. Technical specifications require an output of up to 1.5 quarts per minute and adjustable ratios between 1:1 and 6:1 via drive sprockets, ensuring full compliance with Michael Engineering Part GG-OH specifications. The contract is designated as a total Small Business Set Aside under NAICS code 333248. The selected provider is responsible for delivering fully assembled and tested metering systems to the place of performance in zip code 74501. Interested parties should note the response deadline of October 30, 2026.

W6QM Micc-Ft Drum

POSTED

about 20 hours ago

DEADLINE

in 1 day

AI Contract Overview

This solicitation, numbered W50S83-26-Q-0007, is a combined synopsis and request for quotation issued under the Revised FAR Part 12 for the procurement of a single 64-inch wide-format color Printer/Cutter for the 101st Air Refueling Wing in Bangor, Maine. The acquisition is a total small business set-aside under FAR 19.5 and falls under NAICS code 333248. The equipment must utilize Piezo ink-jet technology with Eco-Solvent ink, achieve a minimum print resolution of 1,800 dpi, support at least a CMYK color configuration, and handle media from 13.2 inches to 64 inches in width with a maximum thickness of 39.3 mil and weight of 99 lbs. It must accommodate both 2-inch and 3-inch media cores, feature a combined printing and cutting width of at least 62.9 inches, and include adjustable cutting speed (10–300 mm/s) and blade force (30–500 gf). The system must have Ethernet connectivity, operate on a standard 100–120V power supply, and be suitable for standard office or production environments. Required deliverables include the printer/cutter unit, Windows-based RIP/print management software, a two-year warranty covering parts, labor, and on-site service, and an initial ink kit consisting of CMYK, Light Cyan, Light Magenta, Yellow, Black, Orange, and Green Eco-Solvent ink pouches (each a minimum of 500ml), plus one cleaning cartridge. Delivery is required F.O.B. Destination to the 101st Maintenance Group MXG at 104 Glenn Ave., Suite 499, Bangor, Maine, 04401-8015, with no lift gate needed due to the facility’s loading dock. The delivery timeline has been amended to allow 90 days from contract award, with all quotes required to specify their exact lead time in calendar days; proposals exceeding this window may be excluded. Offers must be submitted electronically by June 8, 2026, to the designated email address and must include administrative information such as the solicitation number, offeror’s name, address, UEI, CAGE Code, and certification of active SAM registration. The technical submission must clearly identify the

General Info

Purchase of 64-inch color printer/cutter for 101st Air Refueling Wing, small business set-aside, delivery 60 days.

Agency

Department Of Defense → W7NC Uspfo Activity Meang 101

Contract Value

$15,794.91

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

ME, 04401, USA

Set-Aside

SBA

Awardee

OFFTECH OF MAINE INC

Award Issued Date

08/17/2026, 12:00:00 AM UTC

Documents

Clauses Incorporated by Reference and Full Text for Printer Cutter Procurement

clauses

High

RFI #1 for 64-INCH Printer/Cutter

rfi

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseAwarded

PostedMay 28

Combined Synopsis

Notice updatedJun 5

The notice description changed.

AwardedAug 17

Contract was awarded

Submission Closed

06/08/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W7NC Uspfo Activity Meang 101

Contacts2 people available

OfficeBANGOR, ME, 04401-8005, USA

Organization / AgencyDepartment Of Defense → W7NC Uspfo Activity Meang 101

Office AddressBANGOR, ME, 04401-8005, USA

Contacts

Timothy Rexrode

contact@example.gov

+1 (555) 000-0000

st Contracting Office

contact@example.gov

+1 (555) 000-0000

Full Description

**** AMENDMENT 01 (Date: [5 June 2026]) *****
The purpose of this amendment is to:
1. Provide answers to vendor Requests for Information (RFIs). (See attached Q&A Document).
2. Extend the required Delivery Time Frame from 60 days to 90 days after contract award.
All other terms and conditions, including the quote due date, remain unchanged.

This is a combined synopsis/solicitation for commercial products prepared in accordance with the Revolutionary FAR Overhaul Part 12. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. The applicable provisions and clauses are attached (Provisions_ClausesPrinterCutter).

1. Solicitation Number: W50S83-26-Q-0007
Solicitation W50S83-26-Q-0007 is issued as a request for quotation (RFQ) for 1 Unit - 64-inch large-format Printer/Cutter.
This acquisition is set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov/far-overhaul.

RFO FAR 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.
RFO FAR 52.212-2 Evaluation—Commercial Products and Commercial Services.

2. Item Description: 64-inch wide color Printer/Cutter.
The 101st Air refueling Wing in Bangor, Maine, has a requirement for a 64-inch wide color Printer/Cutter. Delivery will be F.O.B. Destination to the 101st Air Refueling Wing loading dock.

3. Salient Characteristics: This printer/cutter must include operating software, initial ink and cleaning consumables, a two-year warranty, and professional services as specified herein.

The Printer/Cutter must meet the following technical specifications:

1 Unit - 64-inch Wide-Format Print/Cut Color Printer
Technology & Ink Method: Must utilize a Piezo ink-jet printing method and Eco-Solvent ink.
Resolution: Must achieve a maximum print resolution of at least 1,800 dpi.
Color Configuration: Must support, at a minimum, a four-color CMYK configuration.
Media Capacity & Handling:
- Accommodate media widths from 13.2 inches up to 64 inches.
- Support a maximum media thickness of 39.3 mil (with liner).
- Handle large media rolls with a maximum outer diameter of 9.8 inches and a maximum weight of 99 lbs.
- Support both 2-inch and 3-inch media core sizes.
Operating Width: Must provide a total combined printing and cutting width of at least 62.9 inches.
Cutting Performance & Control:
- Adjustable cutting speed ranging from 10 to 300 mm/s.
- Adjustable blade force between 30 and 500 gf.
Connectivity: Equipped with an Ethernet port (100BASE-TX/1000BASE-T) for network integration.
Power Requirements: Must operate reliably on a standard 100-120V electrical system.
Environmental Tolerances: Designed to operate reliably within standard office/production environments

RIP / Print Management Software designed for Windows-based systems

Two-Year Warranty covering parts, labor, and on-site servicing.

6 Pouches

Eco-Solvent Ink Pouches/Cartridges Configured as: CMYK, Light Cyan (Lc), and Light Magenta (Lm), Yellow, Key (Black) - minimum 500ml per pouch/cartridge.

1 Pouch Eco-Solvent Ink Orange - minimum 500ml pouch/cartridge.

1 Pouch Eco-Solvent Ink Green - minimum 500ml pouch/cartridge.

1 Pouch Cleaning Cartridge/Pouch - minimum 500ml pouch/cartridge.

4. Delivery Location: (F.O.B. Destination)
F7Q4MA
101st Maintenance Group MXG
104 Glenn Ave., Suite 499
Bangor, Maine 04401-8015

Delivery Logistics: Our facility is equipped with a loading dock; therefore, a lift gate is not required. The 101st ARW will be responsible for moving the equipment from the loading dock to its final designated installation location.

5. Quote Due Date: 08 June 2026

6. Instructions: RFO FAR 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.

To be considered for award, Offerors must submit a complete quotation package to contact@example.gov no later than June 8th, 2026.

The submission must contain the following distinct components:

1. Administrative Information

The solicitation number (W50S83-26-Q-0007).
Offeror’s name, address, telephone number, and email.
The Offeror’s Unique Entity Identifier (UEI) and CAGE Code.
Note: Offerors must have an active registration in the System for Award Management (SAM) at the time of quote submission.
A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation.
A statement that the quoted price is firm for at least 60 calendar days from the quote due date.

2. Technical Submission (Factor 1: Technical Acceptability)

Product Literature: Detailed manufacturer specification sheets, brochures, or technical data sheets for the proposed 64-inch Printer/Cutter.
The submittal must clearly state the Make and Model, of the proposed equipment.
The submittal must explicitly demonstrate compliance with all specifications listed in Salient Characteristics section (including the exact ink configurations, software, and the two-year parts and labor warranty).

3. Delivery Schedule (Factor 2: Delivery Time Frame)

A written statement confirming the ability to deliver all equipment and consumables F.O.B. Destination to Bangor, ME, within 90 days of contract award.
Offerors must state their exact anticipated lead time (in calendar days) from award to delivery.

4. Past Performance (Factor 3: Past Performance)

No separate past performance volume is required.
In accordance with RFO DFARS 204.7603, the Government will pull the vendor's quality and delivery records directly from the Supplier Performance Risk System (SPRS) database using the provided CAGE code.

5. Price Quote (Factor 4: Price)

A firm-fixed-price quote broken down by line item (CLIN) for:
- The 64-inch wide color Printer/Cutter (including RIP software and warranty).
- The initial ink kit and cleaning pouches (as listed in Section 3).
- Any shipping/freight costs to F.O.B. Destination

RFO FAR 52.212-2 Evaluation—Commercial Products and Commercial Services.
Evaluation Criteria (Basis for Award)

Evaluation will be based on Best Value to the Government, which will be determined by evaluating Price, Technical Acceptability, Delivery Time Frame, and Past Performance.

The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

Price:
The Government will evaluate the total quoted firm-fixed price (including the equipment, software, consumables, and shipping) for fairness and reasonableness.

Technical Acceptability:
The Government will evaluate the quote to determine if the proposed equipment meets or exceeds all the Salient Characteristics outlined in Section 3. To be evaluated, the Offeror must provide sufficient product literature/specifications clearly identifying the make and model being offered, and demonstrating compliance with all hardware, ink, software, and warranty requirements.

Delivery Time Frame:
The Government will evaluate the Offeror's proposed lead time for delivery to the F.O.B. Destination (Bangor, Maine). Offerors must clearly state their delivery schedule in their quote. All equipment must be delivered within 90 days of contract award. Quotes proposing delivery beyond 90 days may be excluded from consideration.

Past Performance:
The Government will evaluate the Offeror's past performance in accordance with DFARS 204.7603 and the provision at DFARS 252.204-7024, Notice on the Use of the Supplier Performance Risk System.

The Government will retrieve and consider the supplier risk evaluation scores in the Supplier Performance Risk System (SPRS) for the Offeror's CAGE code.
An Offeror with an unfavorable SPRS performance classification or risk rating may be excluded from consideration.
In the case of an Offeror without a record of relevant past performance or for whom information on past performance is not available in SPRS, the Offeror will not be evaluated favorably or unfavorably on past performance and will receive a rating of "Neutral."
(Relative Importance Statement): Technical Acceptability, Delivery Time Frame, and Past Performance, when combined, are approximately equal to Price.