Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

66--PITOT-STATIC TUBE

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of Pitot-Static tubes for DLA Aviation under the Department of Defense. The current award, held by Statz Corp with a value of 26,119.80 dollars, is a firm fixed price agreement that was competed under SAP. The current period of performance is estimated to end on October 9, 2026. Based on federal award data, this opportunity is classified as a likely recompete with a medium confidence level. The procurement falls under NAICS code 334511 and is managed by the office in Richmond, Virginia. Stuart Dowdy serves as the primary point of contact for this requirement.

General Info

Statz Corp provides Pitot-Static tubes for DLA Aviation via a 26,119.80 dollar contract.

Agency

Department Of Defense → DLA Aviation

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

VA, 329494909, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedApr 9

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

Stuart Dowdy

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE4A625PM118 Incumbent: STATZ CORP Contract Value: $26,119.8 Potential End Date: 2026-10-09T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)

Similar Contracts

Same NAICS industry code

Automated Traffic Enforcement Trailer

Solicitation # W911S226U4411

Solicitation W911S226U4411 is a Total Small Business Set-Aside for the procurement of a complete, towable, autonomous mobile traffic enforcement trailer and laser-based measuring system for the Department of Defense at Fort McCoy, Wisconsin. The primary requirement is for one Automated Traffic Monitoring System Trailer, specifically the POLISCAN Speed FM1 or an approved equal, capable of tracking multiple vehicles across at least four adjacent traffic lanes to enforce speed limits and red-light violations. The contract includes a requirement for eight hours of on-site operator training at Fort McCoy and a minimum 12-month comprehensive manufacturer's warranty. All equipment must be new, and the system must be calibrated to federal and state standards to ensure data is legally admissible in court. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required F.O.B. Destination to Fort McCoy, with a preferred delivery window of 30 days. Offerors must submit their proposals via the PIEE Solicitation module, including technical, price, and past performance documentation. A critical requirement for responsiveness is the completion of Attachment 1 regarding certifications and the identification of the country of origin. The contract incorporates various regulatory clauses, including Buy American preferences, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on certain telecommunications equipment.

W6QM Micc-Ft Drum

POSTED

about 3 hours ago

DEADLINE

66--INDICATOR,ATTITUDE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB18

This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a Request for Quotations for the repair, overhaul, upgrade, and inspection of 33 Attitude Indicators (NSN 6610-01-101-1927 LC, P/N 622-3374-002). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in operational environments. The contract includes an initial induction period of 365 calendar days, which the government may extend by an additional year. Offerors must provide option pricing for a maximum of 135 units over the total contract period. Award will be granted to the offeror with the lowest price technically acceptable quote, with past performance evaluated via the DoD Supplier Performance Risk System. The contractor is responsible for providing all labor, facilities, materials, and tooling, as government-furnished manufacturing aids are not provided. Key technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems and calibration standards such as ANSI/NCSL Z540.3 or ISO-10012-1. Specific prohibitions are in place regarding the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are FOB Destination with a 90-day delivery window, and all packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

58--THERMAL IMAGING SYS

Solicitation # N0010426RQA81

Solicitation N00104-26-R-QA81, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a firm fixed price negotiated procurement for the manufacture of Thermal Imaging Systems under NSN 5855-01-499-1240. The government is seeking a single award based on the most advantageous offer, with past performance weighted as more important than price. The evaluation process utilizes the DoD Supplier Performance Risk System for quality ratings, and the government reserves the right to award to other than the lowest priced offer. Proposals must be submitted via NECO or email, and the current requested delivery date is 180 days after award. The contract mandates strict adherence to quality and technical standards, including physical identification per MIL-STD-130 and preservation and packaging according to MIL-STD-2073. Inspection and acceptance are conducted at the origin, with the contractor remaining responsible for all inspection requirements and maintaining records for 365 days post-delivery. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, compliance with Buy American and Balance of Payments program certificates, and adherence to cybersecurity standards for covered defense information. Offerors must be authorized distributors of the original manufacturer to be considered for award.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

66--PROCESSOR,FLIGHT IN, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB19

Solicitation N0038326QBB19, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of Flight Processors (NSN 6610-01-622-1414). The contract covers a maximum of 30 units over a potential two-year period, with a delivery requirement of 90 days and FOB Destination terms. Award will be based on Lowest Price Technically Acceptable criteria, though past performance is noted as more important than price. Because the item is flight critical, government source approval is mandatory prior to award. The contractor is responsible for providing all labor, materials, and tooling necessary to return units to Ready For Issue condition, as the government will not provide manufacturing aids. Strict quality standards are mandated, including compliance with ISO 9001 or SAE AS9100 and calibration standards such as ANSI/NCSL Z540.3. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contractor must maintain comprehensive quality control documentation and historical record files for each serial number, with formal Material Review Board authority for as-is dispositions retained by the government.

Navsup Weapon Systems Support

POSTED

about 3 hours ago

DEADLINE

58--THERMAL IMAGING SYS, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RQA79

Solicitation N0010426RQA79, issued by NAVSUP Weapon Systems Support Mechanicsburg, is an unrestricted negotiated request for proposal for the teardown, evaluation, repair, and modification of 41 Thermal Imaging Systems (NSN 5855-01-499-1240). The government contemplates the award of a firm-fixed-price contract with a requested delivery date of 180 days after award. All repair work must adhere to contractor standard practices and approved technical directives, with physical identification required per MIL-STD-130 and packaging conducted according to MIL-STD-2073. The contractor is responsible for all inspection and testing at the point of origin, maintaining records for 365 days post-delivery. Any critical or major design or material variances must be submitted via DCMA or SUSHPIP and approved through a formal contract modification. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. Offerors must be authorized distributors of the original manufacturer and comply with various federal and defense acquisition regulations, including cybersecurity requirements for covered defense information and Buy American certifications.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

NERC Compliant Battery Monitoring SystemThis subcontract involves the supply and configuration of battery monitoring systems for prime contractors working on Dalton Utilities energy facility projects in Georgia. The scope of work includes providing monitoring sensors, data acquisition hardware, and specialized software designed to track battery health and performance. A critical requirement of the delivery is that the functional system must maintain full compliance with NERC PRC-005-06 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 334511, the contract focuses on the delivery of a fully operational Battery Monitoring System to ensure the reliability and safety of the utility's energy infrastructure.

Dalton Utilities

POSTED

about 18 hours ago

DEADLINE

Searchlight Unit Supplier (NSN 6230123124633)This subcontract involves the supply of three specialized searchlight units for prime contractors delivering to the Defense Logistics Agency. The hardware must strictly adhere to NSN 6230123124633 and the DLA Master List of Technical and Quality Requirements RA001. A critical manufacturing constraint is that the parts must not be produced using additive manufacturing processes. Eligible suppliers are required to maintain a valid UEI and CAGE code. The project falls under NAICS code 334511 and is associated with the Department of Defense. The response deadline for this requirement is November 9, 2026, with the place of performance located at FPO 09573.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

Supply of Display Units (NSN 7025-01-686-3479)This HUBZone set-aside subcontract involves the procurement of 21 new, unused, and non-refurbished display units under NSN 7025-01-686-3479 for prime contractors supporting DLA Troop Support. The Department of Defense requires genuine OEM materials sourced through authorized distributors, with a strict prohibition against the use of additive manufacturing for production. Deliverables must be shipped FOB Origin to Tracy, California, and must adhere to specific packaging and marking standards, including ASTM D3951, RP001, and MIL-STD-129. The opportunity is categorized under NAICS code 334511, with a response deadline of November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

Electrical Sub-Assembly and IntegrationThis subcontract for Electrical Sub-Assembly and Integration involves the supply and integration of electrical components for prime contractors supporting DLA aviation lighting projects. The scope of work includes soldering, wiring harness assembly, and the installation of light sources and lenses into housings in strict accordance with Reference Drawing 78286 SS3995. The final deliverables are fully wired and assembled light units that must comply with MIL-STD-129 standards for marking and labeling. Managed by the Department of Defense through the Jacksonville Building, the project falls under NAICS code 334511 and will be performed in Jacksonville, Florida. Interested parties must note the response deadline of November 9, 2026, for this specific procurement effort.

JACKSONVILLE BLDG

POSTED

about 22 hours ago

DEADLINE

Supply of Navigational Lights (NSN 6220-01-568-5419)This subcontract involves the manufacture or sourcing of three navigational light assemblies, identified by NSN 6220-01-568-5419, to support prime contractors fulfilling DLA supply contracts. The project falls under NAICS code 334511 and is managed by the Department of Defense through DLA DIST San Joaquin, with the place of performance located in Tracy, California. The contractor is responsible for ensuring all units are packaged and labeled according to strict military and industry standards, including ASTM D3951 for non-hazardous materials, TQ Requirement IP025 and FED-STD-313 for hazardous materials, and MIL-STD-129 for shipment labeling. Additionally, the provider must maintain full compliance with the Buy American Act to successfully deliver the three required units.

DLA DIST SAN JOAQUIN

POSTED

about 22 hours ago

DEADLINE

Aircraft Landing Light Supplier (NSN 6220016458829)This subcontract through Depot Hill for the Department of Defense requires the manufacture or sourcing of four aircraft landing light assemblies under NSN 6220016458829. The supplier is responsible for ensuring all units meet strict aviation lighting quality control standards and adhere to packaging requirements specified by MIL-STD-129 and the DLA Master List. Performance will take place at Hill AFB. To be eligible, contractors must provide a CMMC Level 2 Self-Assessment and maintain full compliance with the Buy American Act and the Berry Amendment. The response deadline for this opportunity is November 9, 2026.

POSTED

about 22 hours ago

DEADLINE

Supply of Display Units (NSN 7025016587076)This subcontract involves the manufacture or procurement of two Display Units meeting the specifications of NSN 7025016587076 for prime contractors supporting the Defense Logistics Agency. The selected provider is responsible for the production, packaging, and coordination of shipment via the First Destination Transportation program, with final delivery to DLA Dist San Joaquin in Tracy, California. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334511 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, to fulfill the requirements for this specific hardware supply contract.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

TURBO SUPERCHARGER / NSN 2950-01-714-4392 / JOINT LIGHT TACTICAL VEHICLE

Solicitation # SPE4A727R0102

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

VALVE ASSY,RELIEF, NSN 1560-014720353, Part-Number 4951062 and 101158-1, Weapon System Designator Code CXN

Solicitation # SPE4A727R0090

DLA Aviation is seeking a firm fixed price contract for the procurement of 106 relief valve assemblies, identified by NSN 1560-014720353 and part numbers 4951062 and 101158-1. This requirement falls under NAICS code 336413 and is designated for weapon system designator code CXN. The competition is categorized as other than full and open, and the final award decision will be based on a combination of price, past performance, and other evaluation factors. The delivery schedule is set for 524 days after receipt of order, with FOB, inspection, and acceptance all occurring at the origin. Prospective bidders must possess enhanced JCP certification to be eligible. The solicitation is expected to be issued around November 13, 2026, and will be available exclusively through the DLA Internet Bid Board System. Performance for this contract is associated with Cherry Point, North Carolina.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

HELICOPTER, BLACKHAWK, UH-60A; FOLD SET, ROTARY WIN

Solicitation # SPE4A72750051

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 2 months

Aviation Controller Inspection and Functional TestingThe Aviation Controller Inspection and Functional Testing subcontract involves providing independent inspection and functional testing services for prime contractors supporting DLA Aviation projects. The scope of work includes conducting environmental stress screening, functional input/output testing, and final quality inspections. These tasks require the use of specialized equipment such as signal generators, oscilloscopes, and environmental chambers to ensure all units meet strict performance standards. Compliance is mandatory with AS9100 and MIL-STD testing protocols to maintain aviation quality and safety. The selected provider is responsible for delivering comprehensive certified test reports and detailed inspection logs for every unit processed. This opportunity falls under NAICS code 541380 and is managed through the Department of Defense.

Testing Laboratories and Services

POSTED

DEADLINE

Aerospace Component Supply (Switches, Joysticks, Sensors)This subcontract under DLA Aviation involves the supply of high-reliability aerospace components, specifically switches, sensors, and interactive input devices, to prime contractors. The scope of work focuses on the procurement of individual component parts, including tactile sensors and aerospace-grade potentiometers, with a particular emphasis on managing long-lead time items and addressing diminishing manufacturing sources to maintain a steady supply chain. To ensure compliance with Department of Defense standards, the provider must maintain full traceability documentation and provide Certificates of Conformance for all delivered parts. The contract falls under NAICS code 423850 and is dedicated to supporting critical aviation infrastructure through the delivery of specialized hardware.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Hand Controller Housing and Mechanical Chassis FabricationThis subcontract for DLA Aviation involves the fabrication of hand controller housings and mechanical chassis, specifically focusing on external casings, ergonomic grips, and internal chassis for prime contractors. The scope of work requires CNC machining, including milling, turning, and finishing of high-strength polymers or aerospace-grade metals, adhering strictly to specifications provided by Mason Electric or Rockwell Collins. Qualified providers must possess the necessary CNC mills and lathes and maintain AS9100 or ISO 9001 certification to ensure aerospace quality standards. The final deliverables consist of finished mechanical housings and chassis, with the solicitation posted on October 28, 2026, and a response deadline of October 30, 2026.

POSTED

DEADLINE

Interactive Hand Controller PCB and Electronics AssemblyThe Interactive Hand Controller PCB and Electronics Assembly subcontract involves the manufacture and assembly of internal printed circuit boards and electronic circuitry for prime contractors supporting DLA Aviation projects. The scope of work encompasses PCB layout, fabrication, surface mount technology assembly, and the soldering of internal circuitry in strict accordance with aviation standards. The final deliverable consists of completed and fully tested electronic circuit assemblies. To qualify for this engagement, providers must possess specialized PCB fabrication equipment and SMT machines. Mandatory certifications include AS9100 and IPC-A-610 to ensure compliance with aerospace quality and reliability requirements. This opportunity falls under NAICS code 334418 and is managed under the Department of Defense.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

CONTROLLER,HAND,INTERACTIVE

Solicitation # SPE4A727R0099

The Defense Logistics Agency Aviation is conducting market research through a sources sought notice for the new manufacture of the Interactive Hand Controller, identified by NSN 5895-015052115. The requirement is for a minimum of 17 and a maximum of 67 units, with approved part numbers including 218-1239-010 from Rockwell Collins, 6100-1001-01 from ATI Engineering Services, and 730-4413 from Mason Electric Co. The scope of work encompasses the entire production lifecycle, including the procurement of component parts, inspection, testing, preservation, packaging, and shipping. Additionally, the selected provider may be responsible for supply chain management, logistics planning, and addressing diminishing manufacturing sources and material shortages. This effort is categorized under NAICS code 336411. While there is no formal solicitation at this time, the government is evaluating potential market capacity to determine if the requirement will be set aside for small businesses or pursued through full and open competition. Interested parties must submit their organization details and tailored capability statements to Montana Kipp by October 30, 2026. Evaluation will focus on the provider's ability to secure necessary financial and technical resources and implement a project management plan that ensures cost containment, schedule compliance, and risk mitigation.

Aircraft Manufacturing

POSTED

DEADLINE

CASE,OPTICAL INSTRUMENT

Solicitation # SPE4A727R0097

DLA Aviation is soliciting quotes for an unrestricted Indefinite Quantity Contract (IQC) with a five year base period for the manufacture of Optical Instrument Cases, NSN 5855-01-609-6252, Part Number OFM-2054-A1. The requirement includes the procurement of component parts, inspection, testing, packaging, and shipping. The estimated annual demand is 305 units, with a minimum delivery order quantity of 76 units and a maximum of 305 units. Delivery is required within 120 days after receipt of order, with inspection and acceptance occurring at the destination and shipping terms set as FOB Origin. The solicitation is scheduled to be issued on November 13, 2026, and will close on December 12, 14, 2026, with offers submitted in writing via the DLA Internet Bid Board System. Award decisions will be based on an equal weighting of price, past performance, and delivery, and the Supplier Performance Risk System will be applied. Prospective suppliers must be registered in the System for Award Management. While EEO clearance is not required and progress payments are not authorized, certified cost and pricing data may be requested.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

NSN 6220-01-434-1886 - LIGHT ASSEMBLY, INDICATOR

Solicitation # SPE4A6-27-R-0077

This indefinite quantity contract, issued by DLA Aviation, is for the procurement of 54 indicator light assemblies for use in F-16 aircraft. The requirement specifies Luminescent Systems, Inc. part number 89-00173-001 as an approved source. The contract features a five-year base period without additional options, with pricing evaluated based on an estimated annual demand of 54 units. Delivery is set as FOB Origin to various facilities within the Continental United States, with a required delivery schedule of 191 days after receipt of order. The solicitation is unrestricted and will be available via DIBBS around November 13, 2026, with a response deadline of December 14, 2026. Prospective offerors must submit a completed physical solicitation package, as electronic offers are not acceptable. While the total value is not expected to exceed the TINA threshold, contractors should be prepared to provide certified cost and pricing data if requested.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 2 months

AIRCRAFT, STRATOLIFTER, C/KC-135; IGNITER, SPARK, A/C HEATER

Solicitation # SPE4A727R0074

Aircraft Manufacturing

POSTED

DEADLINE

WASHER,FLAT - 40A /HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V

Solicitation # SPE4A627R0086

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Solicitation # N0010425QJB03

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

58--RECEIVER,COUNTERMEA, IN REPAIR/MODIFICATION OF

Solicitation # N0038325QP290

Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

66--INDICATOR,POSITION

Solicitation # SPE4A625T665V

POSTED

over 1 year ago

CLOSED

over 1 year ago

JGW Alpha-Beta Probe

Solicitation # N0016725Q1017

POSTED

over 1 year ago

CLOSED

over 1 year ago

MTS-A DMS Retro Fit

Solicitation # FA850925DB0004

FA8509 Aflcmc Wiuka

POSTED

over 1 year ago

CLOSED

over 1 year ago

66--GAMMA RAY SOURCE

Solicitation # N0010425QBP92

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

2 ROPS IR Camera Systems

Solicitation # FA461025Q0027

FA4610 30 Cons Pk

POSTED

over 1 year ago

CLOSED

over 1 year ago

58--RECEIVER-TRANSMITTE

Solicitation # N0038325RD089

Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

Control-Power Supply

Solicitation # SPE4A7-25-R-0505

POSTED

over 1 year ago

CLOSED

over 1 year ago

Follow-On Towed Array Integrated Product Team (TAPIT) Telemetry and Compact Towed Array (CTA) Technical Services

Solicitation # N6660425R0130

Nuwc Division Newport

POSTED

over 1 year ago

CLOSED

over 1 year ago

UMTE Exciter, Radio Frequ

Solicitation # SPRHA5-25-R-0455

Ut DLA Aviation At Ogden

POSTED

over 1 year ago

CLOSED

over 1 year ago

Embedded National Tactical Radio (ENTR) V4

Solicitation # FA5555-24-R-0004

FA8555 Aflcmc C3IBK

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS